Skip to contentSkip to conversation

WonderShaper on spesific ports?

LARTC Wizzcat 3 participants 3 messages Jul 24, 2003 – Jul 28, 2003

lore
Share & tools
lore

Wizzcat

author
#0 lore raw

Hi!

I've just tried out this program and it works amazingly, throttling uploads at whatever speed I like it to. It works great for what I want it for, throttling emule which has a tendency to hose the entire network and grinding everything to a halt, but it also limits all other uploads, so vnc is now impossible. This is of course very unfortunate, so I was wondering if there is a way to limit uploads speeds on only certain ports so I could limit only p2p programs from going overboard and let the rest of the computer continue uploading at full bandwith.

- Wizzcat
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Wizzcat wrote:
--snip---

Quoted 3 lines

wondering if there is a way to limit uploads speeds on only certain ports so I could limit only p2p programs from going overboard and let the rest of the computer continue uploading at full bandwith.

it should be fairly simple
the emule ports are listed here:
http://www.emule-project.net/faq/ports.htm

and in the top of the wondershaper script, it allows you to enter

# low priority source ports
NOPRIOPORTSRC
# low priority destination ports
NOPRIOPORTDST
Signature · 10 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     [email protected]
SnapGear ---                           ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Wizzcat
Quoted 10 lines · Wizzcat

Hi!

I've just tried out this program and it works amazingly, throttling uploads at whatever speed I like it to. It works great for what I want it for, throttling emule which has a tendency to hose the entire network and grinding everything to a halt, but it also limits all other uploads, so vnc is now impossible. This is of course very unfortunate, so I was wondering if there is a way to limit uploads speeds on only certain ports so I could limit only p2p programs from going overboard and let the rest of the computer continue uploading at full bandwith.

Yes it can done. But I don't know the WonderShaper configuration. But it's not so difficult to adapt the wondershaper if you read the docs on lartc.org and docum.org.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/