Skip to contentSkip to conversation

Bandwith sharing in NAT environment.

LARTC Rajesh 4 participants 4 messages Aug 9, 2003 – Aug 14, 2003

lore
Share & tools
lore

Rajesh

author
#0 lore raw

Hi

I wish to implement Bandwith sharing in a NAT environment.

The question is whether I can classify input packets on the basis of ip-addresses (private LAN addresses)? These packets finally need to be NATed before going on to Internet.

Would the tc filters see the private addresses and put it in the appropriate classes or would the tc filters see only the NATed address and the filter would fail in putting the packets in the appropriate classes?

The n/w diag would be somewhat like this

private address LAN ips ------>iptables(NAT)------>Internet.

Can I mark packets using iptables matching source ip-address? What address will tc filter see when the private addresses are masqueraded ?

Any help is most welcome.

Cheers,
Rajesh

_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 12 lines · Rajesh

Hi

I wish to implement Bandwith sharing in a NAT environment.

The question is whether I can classify input packets on the basis of ip-addresses (private LAN addresses)? These packets finally need to be NATed before going on to Internet.

Would the tc filters see the private addresses and put it in the appropriate classes or would the tc filters see only the NATed address and the filter would fail in putting the packets in the appropriate classes?

Quoted 5 lines

The n/w diag would be somewhat like this

private address LAN ips ------>iptables(NAT)------>Internet.

Can I mark packets using iptables matching source ip-address?

Yes.

Quoted 2 lines

What address will tc filter see when the private addresses are masqueraded ?

The ip address of your firewall. So you have to mark the packets in prerouting before the natting....

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Rajesh
Quoted 4 lines · Rajesh

Hi

I wish to implement Bandwith sharing in a NAT environment.

Quoted 9 lines

The question is whether I can classify input packets on the basis of ip-addresses (private LAN addresses)? These packets finally need to be NATed before going on to Internet.

Would the tc filters see the private addresses and put it in the appropriate classes or would the tc filters see only the NATed address and the filter would fail in putting the packets in the appropriate classes?

The n/w diag would be somewhat like this

private address LAN ips ------>iptables(NAT)------>Internet.

private address LAN ips ------>tc(netlink)--------->iptables(NAT)------>Internet
I feel this is how it is...so dnat will be after tc in LAN to WAN and snat will be before tc in WAN to LAN.

-Raghu

Quoted 11 lines

Can I mark packets using iptables matching source ip-address? What address will tc filter see when the private addresses are masqueraded ?

Any help is most welcome.

Cheers,
Rajesh

Quoted 10 lines

_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Rajesh

In a NAT environment, it is advisable to mark packets in prerouting stage. Subsequently, till the packets leaves the system , the mark will not be changed by any other process except a explicit mark iptables statement. Even if NAT changes IP address, the fw mark will still be the same allowing for classification. AFAIK, mark can have values rangign from 1 to 255.

Mohan

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Raghuveer
Sent: Thursday, August 14, 2003 4:33 PM
To: [email protected]
Cc: [email protected]
Subject: Re: [LARTC] Bandwith sharing in NAT environment.

Quoted 5 lines · Rajesh

Hi

I wish to implement Bandwith sharing in a NAT environment.

The question is whether I can classify input packets on the basis of

ip-addresses (private LAN addresses)? These packets finally need to be NATed before going on to Internet.

Quoted 2 lines

Would the tc filters see the private addresses and put it in the

appropriate classes or would the tc filters see only the NATed address and the filter would fail in putting the packets in the appropriate classes?

Quoted 6 lines

The n/w diag would be somewhat like this

private address LAN ips ------>iptables(NAT)------>Internet.

private address LAN
ips ------>tc(netlink)--------->iptables(NAT)------>Internet
I feel this is how it is...so dnat will be after tc in LAN to WAN and snat will be before tc in WAN to LAN.

-Raghu

Quoted 2 lines

Can I mark packets using iptables matching source ip-address? What address will tc filter see when the private addresses are masqueraded

?

Quoted 9 lines

Any help is most welcome.

Cheers,
Rajesh

Quoted 10 lines

_______________________________________________
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/