Skip to contentSkip to conversation

Need a experience eyes on my script

LARTC Stef Coene 1 participant 1 message Sep 1, 2003

lore
Share & tools
lore

Stef Coene

author
#0 lore raw
Quoted 10 lines · Yves Bergeron

Hi,

I used examples I found on this newsgroup and I made the script below. I have 100 mbits to the internet (eth1) and I need tree qdics :
interactive, normal and slow.

Questions :

With the changes I made for the original examples...(300 kbits)
1) is my prio OK

Yes and no. Different prio's can be OK. The packets of a low prio class will be transmitted first. But if that class contains more traffic then the configured rate, the latency will become very high.

Quoted 1 line

2) is my rate OK

No. The sum of the rates of your child class should be equal or smaller then the rate of the parent class. And you didn't specified the ceil. So ceil = rate.

Quoted 1 line

3) is my burst OK

No. Too low. Just remove the burst and htb will calculate the smallest one for you.

Quoted 2 lines

4) What is the best technique (efficience) : TOS, mark because I included both in this script and I want to pick one

You can use both. It depends on what you want to filters. You can use both without any conflicts.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/