Need a experience eyes on my script
Quoted 10 lines · Yves Bergeron
Hi,
I used examples I found on this newsgroup and I made the script below. I have 100 mbits to the internet (eth1) and I need tree qdics :
interactive, normal and slow.Questions :
With the changes I made for the original examples...(300 kbits)
1) is my prio OK
Yes and no. Different prio's can be OK. The packets of a low prio class will be transmitted first. But if that class contains more traffic then the configured rate, the latency will become very high.
Quoted 1 line
2) is my rate OK
No. The sum of the rates of your child class should be equal or smaller then the rate of the parent class. And you didn't specified the ceil. So ceil = rate.
Quoted 1 line
3) is my burst OK
No. Too low. Just remove the burst and htb will calculate the smallest one for you.
Quoted 2 lines
4) What is the best technique (efficience) : TOS, mark because I included both in this script and I want to pick one
You can use both. It depends on what you want to filters. You can use both without any conflicts.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/