Wondershaper modifications
Hep Dear Listmembers and Stef!
Setup
Internet
eth0
|
| -----------------
| | | |
eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc
All Lans are natted to eth0
Now i use wondershaper (1.1a) on eth0 to shap interactive traffic (work allready thanks!) But i have a special requirments for priorities
samba traffic from eth1 to internet. Ive done this with the following lines in iptables and wondershaper :
iptables :
$IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j MARK --set-mark 2
$IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j MARK --set-mark 2
wondershaper :
tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw classid 1:10
This setup seems to work partly. When i browser network on anohter host over internet i get no lag and fast response (low latency). But when i try to edit file (3kb) it takes around 10 seconds to save the file? Since my connection is 2048/512 and ive set my UPLINKE0 it should take no more than 1-2 secs to update a file over internet? What am i overlooking here?
Signature · 13 lines
Venlig hilsen/Kind regards Thomas Kirk ARKENA tlf/phone +4570233456 thomas(at)arkena(dot)com Http://www.arkena.com "It's naive to think you can change a person--except maybe that boy who works in the library." -- Lisa Simpson _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 33 lines · Thomas Kirk
Hep Dear Listmembers and Stef!
Setup
Internet
eth0-----------------
eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc
All Lans are natted to eth0
Now i use wondershaper (1.1a) on eth0 to shap interactive traffic (work allready thanks!) But i have a special requirments for priorities
samba traffic from eth1 to internet. Ive done this with the following lines in iptables and wondershaper :iptables :
$IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j MARK --set-mark 2
$IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j MARK --set-mark 2wondershaper :
tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw classid 1:10
Quoted 6 lines
This setup seems to work partly. When i browser network on anohter host over internet i get no lag and fast response (low latency). But when i try to edit file (3kb) it takes around 10 seconds to save the file? Since my connection is 2048/512 and ive set my UPLINKE0 it should take no more than 1-2 secs to update a file over internet? What am i overlooking here?
Can you check the timeout with a simple ping? And what about making a directory or copying a file ?
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/