Skip to contentSkip to conversation

trafic shaping with aliases

LARTC Aleksandar Simonovski 2 participants 2 messages Oct 10, 2003

lore
Share & tools
lore
#0 lore raw

Hi,
This is my scenario

1.---------

		| 
   2.---------   
		| <-------> HUB <-----> ETH1 <--- SHAPER ---> ETH0 <-----> INTERNET
   3.---------
		|

4.---------

1,2,3 and 4 are all different networks
ETH1 has four aliases whic are gateways for 1,2,3 and 4
can some help me with using HTB or CBQ for limiting the four diferent networks

1. 128KBit
2. 64KBit
3. 512Kbit
4. 192KBit

thaks,
Aleksandar

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Think about the four networks like networks, all the four are at the same physical interface - eth1, and aliases doesn't matter. So, you put the root class and qdisc at eth1, create four subclasses for each network, attach qdiscs and create four filters, each filter for one network.

-- Nikolay Datchev

Quoted 20 lines · Aleksandar Simonovski

Hi,
This is my scenario

   1.---------
		|
   2.---------
		| <-------> HUB <-----> ETH1 <--- SHAPER ---> ETH0 <-----> INTERNET
   3.---------
		|
   4.---------

1,2,3 and 4 are all different networks
ETH1 has four aliases whic are gateways for 1,2,3 and 4
can some help me with using HTB or CBQ for limiting the four diferent networks

1. 128KBit
2. 64KBit
3. 512Kbit
4. 192KBit

Quoted 7 lines

thaks,
Aleksandar

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/