trafic shaping with aliases
Hi,
This is my scenario
1.---------
| 2.--------- | <-------> HUB <-----> ETH1 <--- SHAPER ---> ETH0 <-----> INTERNET 3.--------- |
4.---------
1,2,3 and 4 are all different networks
ETH1 has four aliases whic are gateways for 1,2,3 and 4
can some help me with using HTB or CBQ for limiting the four diferent networks
1. 128KBit
2. 64KBit
3. 512Kbit
4. 192KBit
thaks,
Aleksandar
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Think about the four networks like networks, all the four are at the same physical interface - eth1, and aliases doesn't matter. So, you put the root class and qdisc at eth1, create four subclasses for each network, attach qdiscs and create four filters, each filter for one network.
-- Nikolay Datchev
Quoted 20 lines · Aleksandar Simonovski
Hi,
This is my scenario1.--------- | 2.--------- | <-------> HUB <-----> ETH1 <--- SHAPER ---> ETH0 <-----> INTERNET 3.--------- | 4.---------1,2,3 and 4 are all different networks
ETH1 has four aliases whic are gateways for 1,2,3 and 4
can some help me with using HTB or CBQ for limiting the four diferent networks1. 128KBit
2. 64KBit
3. 512Kbit
4. 192KBit
Quoted 7 lines
thaks,
Aleksandar_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/