partly correct routing
Stefan Bayer [email protected]
<PRE>Hello!
I want to use my isdn (ippp0) connection for ftp transfer and my adsl (eth0/ppp0) connection for all other transfer from my LAN (eth1) connected to the router.
I managed to set up iproute2 with fwmarks to send out packet to ippp0, but the data connection is done by adsl.
What do I have to set up to get this working correctly?
my iptables setup:
$IPTABLES -A PREROUTING -t mangle -p TCP -d ! $LOCALNET --dport 21 -j MARK --set-mark 1
$IPTABLES -A PREROUTING -t mangle -p UDP -d ! $LOCALNET --dport 21 -j MARK --set-mark 1
$IPTABLES -A PREROUTING -t mangle -p TCP -d ! $LOCALNET --dport 20 -j MARK --set-mark 1
$IPTABLES -A PREROUTING -t mangle -p UDP -d ! $LOCALNET --dport 20 -j MARK --set-mark 1
routing in table ippp0:
ip route list table ippp0
195.3.65.72 dev ippp0 proto kernel scope link src 212.183.78.79 default via 195.3.65.72 dev ippp0
other routing:
ip route list
212.88.181.5 dev ppp0 proto kernel scope link src 212.88.xxx.xxx 195.3.65.0/24 dev ippp0 proto kernel scope link src 212.183.78.79 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.2 192.168.2.0/24 dev eth1 proto kernel scope link src 192.168.2.1 127.0.0.0/8 dev lo scope link
default via 212.88.181.5 dev ppp0
ip rule list
0: from all lookup local 32765: from all fwmark 1 lookup ippp0 32766: from all lookup main 32767: from all lookup default
Signature · 12 lines
thanx Stefan Email: <A HREF="mailto:[email protected]">[email protected]</A> ---------------------------------------------------- My Box said: "Install Win95 or better ..." So I installed Linux. Microsoft gives you Windows Linux gives you the whole house </PRE>
Wingtung.Leung [email protected]
<PRE>I think you misunderstand the FTP protocol. The FTP commands are sent to the server's port 21 and the data is sent FROM the server port 20 to a local unprivileged port (>1024).
I think you should set your mark dependant on source port instead of destination port.
Another way: use passive FTP, where the client initiates the connection to a unprivileged server port.
(I know I don't give all the answers here, but hope it's a good start for you.
On Mon, 4 Dec 2000, Stefan Bayer wrote:
><i> Hello!
</I>><i> I want to use my isdn (ippp0) connection for ftp transfer and my adsl </I>><i> (eth0/ppp0) connection for all other transfer from my LAN (eth1) connected to </I>><i> the router.
</I>><i> I managed to set up iproute2 with fwmarks to send out packet to ippp0, but </I>><i> the data connection is done by adsl.
</I>><i> What do I have to set up to get this working correctly? </I>><i> my iptables setup:
</I>><i> $IPTABLES -A PREROUTING -t mangle -p TCP -d ! $LOCALNET --dport 21 -j MARK </I>><i> --set-mark 1
</I>><i> $IPTABLES -A PREROUTING -t mangle -p UDP -d ! $LOCALNET --dport 21 -j MARK </I>><i> --set-mark 1
</I>><i> $IPTABLES -A PREROUTING -t mangle -p TCP -d ! $LOCALNET --dport 20 -j MARK </I>><i> --set-mark 1
</I>><i> $IPTABLES -A PREROUTING -t mangle -p UDP -d ! $LOCALNET --dport 20 -j MARK </I>><i> --set-mark 1
</I>><i>
</I>><i> routing in table ippp0:
</I>><i> ip route list table ippp0
</I>><i> 195.3.65.72 dev ippp0 proto kernel scope link src 212.183.78.79 </I>><i> default via 195.3.65.72 dev ippp0
</I>><i>
</I>><i> other routing:
</I>><i> ip route list
</I>><i> 212.88.181.5 dev ppp0 proto kernel scope link src 212.88.xxx.xxx </I>><i> 195.3.65.0/24 dev ippp0 proto kernel scope link src 212.183.78.79 </I>><i> 10.0.0.0/24 dev eth0 proto kernel scope link src 10.0.0.2 </I>><i> 192.168.2.0/24 dev eth1 proto kernel scope link src 192.168.2.1 </I>><i> 127.0.0.0/8 dev lo scope link
</I>><i> default via 212.88.181.5 dev ppp0
</I>><i>
</I>><i>
</I>><i> ip rule list
</I>><i> 0: from all lookup local </I>><i> 32765: from all fwmark 1 lookup ippp0 </I>><i> 32766: from all lookup main </I>><i> 32767: from all lookup default
</I>
</PRE>