CBQ Conf files
Deepak singhal [email protected]
Hi All,
I am using CBQ init file v 0.6.1 and doing banwidth allocation . I have to make seperate file fo reach group or ip i want to cap .
for e.g. if I have to cap say ten ips from 192.168.1.10 to 192.168.1.20 , each ip to say 32 Kbits , then do i have to make seperate file for each . I try doing something like this but this didn`t worked .
Sample Config file :
DEVICE=eth1,10Mbit,1Mbit
RATE=32Kbit
WEIGHT=3Kbit
PRIO=5
RULE=192.168.1.10
RULE=192.168.1.11
RULE=192.168.1.12
and so on
But instead of allocating each Ip a bandwidth of 32 KBit , it capped for all ips combined to 32 Kbit.
Is there a work around of this or i have to make a seperate file for each IP.
Thanks
Deepak