Skip to contentSkip to conversation

CBQ Conf files

LARTC Deepak singhal [email protected] 1 participant 1 message Feb 16, 2001

lore
Share & tools
lore

Deepak singhal [email protected]

author
#0 lore raw

Hi All,

I am using CBQ init file v 0.6.1 and doing banwidth allocation . I have to make seperate file fo reach group or ip i want to cap .

for e.g. if I have to cap say ten ips from 192.168.1.10 to 192.168.1.20 , each ip to say 32 Kbits , then do i have to make seperate file for each . I try doing something like this but this didn`t worked .

Sample Config file :

DEVICE=eth1,10Mbit,1Mbit
RATE=32Kbit
WEIGHT=3Kbit
PRIO=5
RULE=192.168.1.10
RULE=192.168.1.11
RULE=192.168.1.12

and so on

But instead of allocating each Ip a bandwidth of 32 KBit , it capped for all ips combined to 32 Kbit.

Is there a work around of this or i have to make a seperate file for each IP.

Thanks

Deepak