SB PCI128 mixer problems ( can't deactivate input passthru)
Hi,
I'm running the a Redhat 6.1 box with Soundblaster PCI128,
PCM input/output works well,
except that I am unable to deactivate microphone input passthru on the output,
that means when record from the MIC I can always hear the dry signal on the
output which is very disturbing , especially when doing realtime processing.
I tried with both xmixer and kmix, no luck !
any advice ?
regards,
Benno.
I also use ossmixer, which allows you to select the input or mute it. If you right click on the kmix channel, you can do the same, I think.
| Hi, | I'm running the a Redhat 6.1 box with Soundblaster PCI128, | | PCM input/output works well, | except that I am unable to deactivate microphone input passthru on the
output,
| that means when record from the MIC I can always hear the dry signal on the
| output which is very disturbing , especially when doing realtime processing.
| | I tried with both xmixer and kmix, no luck ! | | any advice ? | | regards, | Benno.
----- Original Message -----
From: Benno Senoner <[email protected]>
To: <[email protected]>
Sent: Friday, October 22, 1999 7:48 AM
Subject: SB PCI128 mixer problems ( can't deactivate input passthru)
| Hi, | I'm running the a Redhat 6.1 box with Soundblaster PCI128, | | PCM input/output works well, | except that I am unable to deactivate microphone input passthru on the
output,
| that means when record from the MIC I can always hear the dry signal on the
| output which is very disturbing , especially when doing realtime processing.
| | I tried with both xmixer and kmix, no luck ! | | any advice ? | | regards, | Benno.
Quoted 3 lines · llornkcor
I also use ossmixer, which allows you to select the input or mute it. If you right click on the kmix channel, you can do the same, I think.
Thank you,
it does work now !
right clicking on kmix and muting the MIC input works. (Now I can record , but don't hear the dry signal on the output) seems to be an xmixer fault ..
regards,
Benno.