Skip to contentSkip to conversation

SB PCI128 mixer problems ( can't deactivate input passthru)

DISCUSSION Benno Senoner 2 participants 4 messages Oct 22, 1999 Sound

lore
Share & tools
lore
#0 lore raw

Hi,
I'm running the a Redhat 6.1 box with Soundblaster PCI128,

PCM input/output works well,
except that I am unable to deactivate microphone input passthru on the output,
that means when record from the MIC I can always hear the dry signal on the
output which is very disturbing , especially when doing realtime processing.

I tried with both xmixer and kmix, no luck !

any advice ?

regards,
Benno.

#1 lore raw

I also use ossmixer, which allows you to select the input or mute it. If you right click on the kmix channel, you can do the same, I think.

| Hi,
| I'm running the a Redhat 6.1 box with Soundblaster PCI128,
|
| PCM input/output works well,
| except that I am unable to deactivate microphone input passthru on the

output,
| that means when record from the MIC I can always hear the dry signal on the
| output which is very disturbing , especially when doing realtime processing.

|
| I tried with both xmixer and kmix, no luck !
|
| any advice ?
|
| regards,
| Benno.
#2 lore raw
In reply to Benno Senoner

----- Original Message -----
From: Benno Senoner <[email protected]>
To: <[email protected]>
Sent: Friday, October 22, 1999 7:48 AM
Subject: SB PCI128 mixer problems ( can't deactivate input passthru)

| Hi,
| I'm running the a Redhat 6.1 box with Soundblaster PCI128,
|
| PCM input/output works well,
| except that I am unable to deactivate microphone input passthru on the

output,
| that means when record from the MIC I can always hear the dry signal on the
| output which is very disturbing , especially when doing realtime processing.

|
| I tried with both xmixer and kmix, no luck !
|
| any advice ?
|
| regards,
| Benno.
#3 lore raw
In reply to Benno Senoner
Quoted 3 lines · llornkcor

I also use ossmixer, which allows you to select the input or mute it. If you right click on the kmix channel, you can do the same, I think.

Thank you,
it does work now !
right clicking on kmix and muting the MIC input works. (Now I can record , but don't hear the dry signal on the output) seems to be an xmixer fault ..

regards,
Benno.