gpio: twl4030: Remove error print for devm_add_action_or_reset()

When devm_add_action_or_reset() fails, it is due to a failed memory allocation and will thus return -ENOMEM. dev_err_probe() doesn't do anything when error is -ENOMEM. Therefore, remove the useless call to dev_err_probe() when devm_add_action_or_reset() fails, and just return the value instead.

---
Changes in v2:

* Split the patch to one seperate patch for each sub-system.

Link to v1: https://lore.kernel.org/all/[email protected]/

 drivers/gpio/gpio-twl4030.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

index e39e39e3ef85..3a962d73a0fb 100644
@@ -597,9 +597,7 @@ static int gpio_twl4030_probe(struct platform_device *pdev)
 
 		ret = devm_add_action_or_reset(&pdev->dev, gpio_twl4030_power_off_action, d);
 		if (ret)
-			return dev_err_probe(&pdev->dev, ret,
-					     "failed to install power off handler\n");
-
+			return ret;
 	}
 
 	return 0;

base-commit: 260f6f4fda93c8485c8037865c941b42b9cba5d2

2.39.5

From: Bartosz Golaszewski <[email protected]>

Applied, thanks!

[1/1] gpio: twl4030: Remove error print for devm_add_action_or_reset()

      https://git.kernel.org/brgl/linux/c/0d1e68fb1efd2fe951d68cf05460e3672d4a846d

Best regards,

Bartosz Golaszewski <[email protected]>