Any DVB-C tuner with working CAM?
Hello,
I have bought and tested two DVB-C cards which are supported according to
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.
1. TechnoTrend Premium DVB-C 2300
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X) adapter has MAC addr = ....
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 3: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 3 supports CI link layer interface
dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415dvb_ttpci: saa7113 not accessible.saa7146_vv: saa7146 (0): registered device video2 [v4l2]saa7146_vv: saa7146 (0): registered device vbi2 [v4l2]
DVB: registering frontend 3 (ST STV0297 DVB-C)...
Applications detect the inserted CAM even if the CAM is not inserted ;-) but even when it is, no scrambled channel is decrypted.
2. Technisat CableStar HD2
found a VP-2040 PCI DVB-C device on (01:02.0),
Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64
memory: 0xefeff000, mmio: 0xffffc20000aee000
MAC Address=[....]mantis_alloc_buffers (0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536 mantis_alloc_buffers (0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000
DVB: registering new adapter (Mantis dvb adapter)
It says that an unsupported CAM is inserted. :-( Then I found in this mailing list that the mantis CI-CAM support is not finalized yet. I appreciate the work that Manu does with the mantis driver and I trust that it will be supported in the comming months but I would expect that the Wiki page mentioned above will have also the information about not yet supported CI! :-(
So I have the CAM, two DVB-C cards but can't watch the channels I pay every month... I spent many days with Google to find out a working solution with these two or another card but unsuccessfully. Can somebody please advice me a DVB-C card with CI which _is on market_ and does work with Technisat Conax CAM?
Thanks in advance,
Tomas
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 7 lines · Tomas Drajsajtl
Hello,
I have bought and tested two DVB-C cards which are supported according to
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.1. TechnoTrend Premium DVB-C 2300
TT DVB-C 2300 works fine here with AlphaCrypt -Light. This card has CI/CAM support for several years already.
And it has worked here for several years with CI/CAM.
The Mantis Chip 2033 does not work with the CAM yet.
The KNC One TV-Station DVB-C Plus works fine with the AlphaCrypt -Light, too (Driver Multiproto_plus).
With the last combination and VDR-1.7 + xineliboutput I can watch Anixe HD-TV.
Ciao Ruediger D.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT DVB-C 2300 and CAM, Was: Any DVB-C tuner with working CAM?
Quoted 2 lines
Quoted 2 lines
Hello,
I have bought and tested two DVB-C cards which are supported according
to
Quoted 8 lines
Quoted 5 lines
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.1. TechnoTrend Premium DVB-C 2300
TT DVB-C 2300 works fine here with AlphaCrypt -Light. This card has CI/CAM support for several years already.
And it has worked here for several years with CI/CAM.
Interesting. I have Technisat Technicrypt CXV (Conax) inserted and none of the channels is decrypted. Tried czap, vlc, vdr.
uname -a:
Linux pvr 2.6.23.17-88.fc7 #1 SMP Thu May 15 00:02:29 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux
lspci -nvv:
01:00.0 0480: 1131:7146 (rev 01)
Subsystem: 13c2:000a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at eedff400 (32-bit, non-prefetchable) [size=512]czap - no errors reported but no useful data output
vlc - reports detected CAM doesn't matter if it's really inserted or not:
[00000338] dvb access debug: Opening device /dev/dvb/adapter0/ca0 [00000338] dvb access debug: CAMInit: CA interface with 2 slots [00000338] dvb access debug: CAMInit: CI link layer level interface type [00000338] dvb access debug: CAMInit: built-in descrambler detected [00000338] dvb access debug: CAMInit: 16 available descramblers (keys) [00000338] dvb access debug: CAMInit: ECD scrambling system supported
vdr - says only
Nov 3 07:42:33 pvr vdr: [16467] ERROR: no useful data seen within 10627076
byte of video stream
I know that vdr should report something about detected CAM but nothing in it's log file...
Tomas
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT DVB-C 2300 and CAM, Was: Any DVB-C tuner with working CAM?
Dear Tomas
Attached you find part of my/var/log/boot.msg
and
/var/log/messages
One hint: When switching from vdr 1.4.x to 1.5/1.6/1.7 the channel.conf must be adapted with respect to decrypted channels.
Ciao Ruediger D.
/*
* /var/log/boot.msg
*/
<4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
<6>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 <4>saa7146: found saa7146 @ mem f887e000 (revision 1, irq 18) (0x13c2,0x000a). <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c015112f7d8]
<6>DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X) <7>ieee1394: Host added: ID:BUS[1-00:1023] GUID[00046100000905df]
<4>adapter has MAC addr = 00:d0:5c:04:45:e6
<4>dvb-ttpci: gpioirq unknown type=0 len=0
<4>dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 <4>dvb-ttpci: firmware @ card 0 supports CI link layer interface
<4>dvb-ttpci: DVB-C analog module @ card 0 detected, initializing MSP3415 <4>dvb_ttpci: saa7113 not accessible.
<4>saa7146_vv: saa7146 (0): registered device video0 [v4l2]
<4>saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
<4>DVB: registering frontend 0 (ST STV0297 DVB-C)...
<6>input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input5 <6>dvb-ttpci: found av7110-0.
<6>Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k <6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [email protected] <6>loop: module loaded
/*
* /var/log/messages
*/
Nov 3 22:45:02 linux-nszr vdr: [1245] VDR version 1.4.2-2 started Nov 3 22:45:02 linux-nszr vdr: [1245] loading /video/setup.conf Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: AntiAlias = 1 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: ChannelEntryTimeout = 1000 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: DisplaySubtitles = 0 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: EmergencyExit = 1 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontFix = Courier:Bold Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontFixSize = 20 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontOsd = Sans Serif:Bold Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontOsdSize = 22 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontSml = Sans Serif Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontSmlSize = 18 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: MenuKeyCloses = 0 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: NextWakeupTime = 0 Nov 3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: SortTimers = 1 Nov 3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleBgTransparency = 0 Nov 3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleFgTransparency = 0 Nov 3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleLanguages = Nov 3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleOffset = 0 Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/sources.conf Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/diseqc.conf Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/channels.conf Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/timers.conf Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/commands.conf Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/svdrphosts.conf Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/remote.conf Nov 3 22:45:03 linux-nszr vdr: [1245] loading /video/keymacros.conf Nov 3 22:45:03 linux-nszr vdr: [1246] video directory scanner thread started (pid=1245, tid=1246) Nov 3 22:45:03 linux-nszr vdr: [1246] video directory scanner thread ended (pid=1245, tid=1246) Nov 3 22:45:03 linux-nszr vdr: [1247] video directory scanner thread started (pid=1245, tid=1247) Nov 3 22:45:03 linux-nszr vdr: [1247] video directory scanner thread ended (pid=1245, tid=1247) Nov 3 22:45:03 linux-nszr vdr: [1245] reading EPG data from /video/epg.data Nov 3 22:45:03 linux-nszr vdr: [1245] probing /dev/dvb/adapter0/frontend0 Nov 3 22:45:05 linux-nszr vdr: [1249] tuner on device 1 thread started (pid=1245, tid=1249) Nov 3 22:45:05 linux-nszr vdr: [1250] section handler thread started (pid=1245, tid=1250) Nov 3 22:45:05 linux-nszr vdr: [1245] found 1 video device Nov 3 22:45:05 linux-nszr vdr: [1245] setting primary device to 1 Nov 3 22:45:05 linux-nszr vdr: [1245] SVDRP listening on port 2001 Nov 3 22:45:05 linux-nszr vdr: [1245] setting current skin to "sttng" Nov 3 22:45:05 linux-nszr vdr: [1245] loading /video/themes/sttng-default.theme Nov 3 22:45:05 linux-nszr vdr: [1245] ERROR: /dev/lircd: No such file or directory Nov 3 22:45:05 linux-nszr vdr: [1251] KBD remote control thread started (pid=1245, tid=1251) Nov 3 22:45:05 linux-nszr vdr: [1245] ERROR: remote control LIRC not ready! Nov 3 22:45:05 linux-nszr vdr: [1245] remote control KBD - keys known Nov 3 22:45:07 linux-nszr vdr: [1245] CAM: AlphaCrypt Light, 01, 4A20, 4A20 Nov 3 22:45:08 linux-nszr vdr: [1245] switching to channel 1 Nov 3 22:45:11 linux-nszr vdr: [1250] changing name of channel 24 from 'Bayerisches FS Süd,;ARD' to 'Bayerisches FS S#,;ARD' Nov 3 22:45:11 linux-nszr vdr: [1250] changing name of channel 26 from 'WDR Köln,;ARD' to 'WDR K#n,;ARD' Nov 3 22:45:13 linux-nszr vdr: [1245] switching to channel 34 Nov 3 22:45:16 linux-nszr vdr: [1250] creating new channel 'OraiaTV (engl),;Digital Free' on C transponder 330 with id 61441-10008-53119-0 Nov 3 22:45:16 linux-nszr vdr: [1250] changing name of channel 642 from 'Bayern Mobil,;ARD' to 'BAYERN plus,;ARD' Nov 3 22:45:16 linux-nszr vdr: [1245] retuning due to modification of channel 34 Nov 3 22:45:16 linux-nszr vdr: [1245] switching to channel 34 Nov 3 22:45:18 linux-nszr vdr: [1250] changing pids of channel 676 from 0+0:0:0 to 941+941:942=deu:0 Nov 3 22:45:18 linux-nszr vdr: [1250] changing caids of channel 676 from 0 to 1801,1722,1834
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TT DVB-C 2300 and CAM, Was: Any DVB-C tuner with working CAM?
Dear Ruediger,
thanks for the reply!
I tried to upgrade from vdr 1.4.7 to 1.6.0 and see some difference:
Nov 4 12:00:45 pvr vdr: [4375] CAM 1: module present Nov 4 12:01:23 pvr vdr: [4375] CAM 1: no module present Nov 4 12:01:23 pvr vdr: [4375] CAM 1: module present Nov 4 12:02:01 pvr vdr: [4375] CAM 1: no module present Nov 4 12:02:02 pvr vdr: [4375] CAM 1: module present Nov 4 12:02:14 pvr vdr: [4375] CAM 1: no module present
.... and so on.
And still no output from the scrambled channels. I saw some CAM timeout fix in the 1.6.0-1 patch but no change when applied. Also 1.6.0-2 didn't help.
Regards,
Tomas
Quoted 5 lines
Dear Tomas
Attached you find part of my
/var/log/boot.msg
Quoted 11 lines
and
/var/log/messagesOne hint: When switching from vdr 1.4.x to 1.5/1.6/1.7 the channel.conf must be adapted with respect to decrypted channels.
Ciao Ruediger D.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Manu,
saw you were back in action!? Cool! :-)
Could you comment on if it would be possible to make the Mantis 2033(/2040?) cards work with CI/CAM?
regards
/Ernst Persson
Quoted 21 lines · Ruediger Dohmhardt
Quoted 7 lines · Tomas Drajsajtl
Hello,
I have bought and tested two DVB-C cards which are supported according to
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.1. TechnoTrend Premium DVB-C 2300
TT DVB-C 2300 works fine here with AlphaCrypt -Light. This card has CI/CAM support for several years already.
And it has worked here for several years with CI/CAM.The Mantis Chip 2033 does not work with the CAM yet.
The KNC One TV-Station DVB-C Plus works fine with the AlphaCrypt -Light, too (Driver
Multiproto_plus).
With the last combination and VDR-1.7 + xineliboutput I can watch Anixe HD-TV.
Quoted 8 lines
Ciao Ruediger D.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi,
I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this works fine with my cable provider. The CAM was ordered from www.dvb-shop.netalong with the DVB-C card.
Apparently they only ship rev 1.2 ( (
http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM
--Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but I have not tested this CAM, although dvb-shop states that rev 1.2 is compatible as well.
My cable provider is not Technisat, but I guess that if Technisat encryption is based on Conax 4.00e then the CAM should be okay.
My configuration works in mythtv and (by recollection) mplayer and xine.
I get the same dmesg output as you for the tt-dvbpci card.
I also use a Terratec Cinergy-C Card using the mantis drivers but the CI interface of that card is not yet supported as well.
Rune
2008/11/2 Tomas Drajsajtl <[email protected]>
Quoted 47 lines
Hello,
I have bought and tested two DVB-C cards which are supported according to
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.1. TechnoTrend Premium DVB-C 2300
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X) adapter has MAC addr = ....
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 3: firmf0240009, rtslb0250018, vid 71010068, app 80002622
dvb-ttpci: firmware @ card 3 supports CI link layer interface
dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415dvb_ttpci: saa7113 not accessible.saa7146_vv: saa7146 (0): registered device video2 [v4l2]saa7146_vv: saa7146 (0): registered device vbi2 [v4l2]
DVB: registering frontend 3 (ST STV0297 DVB-C)...Applications detect the inserted CAM even if the CAM is not inserted ;-) but
even when it is, no scrambled channel is decrypted.2. Technisat CableStar HD2
found a VP-2040 PCI DVB-C device on (01:02.0),
Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64
memory:0xefeff000, mmio:0xffffc20000aee000
MAC Address=[....]mantis_alloc_buffers(0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536mantis_alloc_buffers(0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000
DVB: registering new adapter (Mantis dvb adapter)It says that an unsupported CAM is inserted. :-( Then I found in this mailing list that the mantis CI-CAM support is not finalized yet. I appreciate the work that Manu does with the mantis driver and I trust that it will be supported in the comming months but I would expect that the Wiki page mentioned above will have also the information about not yet supported CI! :-(
So I have the CAM, two DVB-C cards but can't watch the channels I pay every month... I spent many days with Google to find out a working solution with these two or another card but unsuccessfully. Can somebody please advice me a DVB-C card with CI which
_isonmarket_and does work with Technisat Conax
CAM?
Quoted 9 lines
Thanks in advance,
Tomas_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Dear Rune,
what is your kernel version? I have the same tuner from the same shop but the CAM is Technisat. I cannot replace the CAM provided by my cable oprerator because they won't pair their Conax card with the CAM like you have for me. :-( Is it possible that TT 2300-C Premium + Technisat Technicrypt CX http://www.technisat.com/index9acb.html?nav=CI_modules,en,68-32 can have problems with the linux driver?
Regards,
Tomas
----- Original Message -----
From: Rune Evjen
To: Tomas Drajsajtl
Cc: [email protected]
Sent: Thursday, November 13, 2008 2:56 PM
Subject: Re: [linux-dvb] Any DVB-C tuner with working CAM?
Hi,
I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this works fine with my cable provider. The CAM was ordered from www.dvb-shop.net along with the DVB-C card.
Apparently they only ship rev 1.2 ( (http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM--Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but I have not tested this CAM, although dvb-shop states that rev 1.2 is compatible as well.
My cable provider is not Technisat, but I guess that if Technisat encryption is based on Conax 4.00e then the CAM should be okay.
My configuration works in mythtv and (by recollection) mplayer and xine.
I get the same dmesg output as you for the tt-dvbpci card.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I use kernel 2.6.27 (amd64 architecture) but have used multiple kernels over the last year, both amd64 and i386 without problems.
The only problem is that once in while (every month or two maybe ?) I cannot get lock on any channel and the only way to solve this is to power off the computer, and power it up again (a restart doesn't help).
Rune
2008/11/14 Tomas Drajsajtl <[email protected]>
Quoted 32 lines
Dear Rune,
what is your kernel version? I have the same tuner from the same shop but the CAM is Technisat. I cannot replace the CAM provided by my cable oprerator because they won't pair their Conax card with the CAM like you have for me. :-(
Is it possible that TT 2300-C Premium + Technisat Technicrypt CX
http://www.technisat.com/index9acb.html?nav=CI_modules,en,68-32 can have problems with the linux driver?Regards,
Tomas----- Original Message -----
*From:* Rune Evjen <[email protected]>
*To:* Tomas Drajsajtl <[email protected]> *Cc:* [email protected]
*Sent:* Thursday, November 13, 2008 2:56 PM *Subject:* Re: [linux-dvb] Any DVB-C tuner with working CAM?Hi,
I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this works fine with my cable provider. The CAM was ordered from www.dvb-shop.net along with the DVB-C card.
Apparently they only ship rev 1.2 ( (
http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM
--Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but I have not tested this CAM, although dvb-shop states that rev 1.2 is compatible as well.
Quoted 10 lines
My cable provider is not Technisat, but I guess that if Technisat encryption is based on Conax 4.00e then the CAM should be okay.
My configuration works in mythtv and (by recollection) mplayer and xine.
I get the same dmesg output as you for the tt-dvbpci card.
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb