ARM: dts: aspeed: add Ampere's Mt. Mitchell BMC
PATCH v2 1/1 ARM: dts: aspeed: add Ampere's Mt. Mitchell BMC
Add initial device tree for Aspeed AST2600-based Mt. Mitchell BMC found on AmpereOne's reference platform.
---
v2:
- Fix tab issue [Zev Weiss]
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/ast2600-mtmitchell.dts | 114 ++++++++++++++++++++++++++++ 2 files changed, 115 insertions(+) create mode 100644 arch/arm/dts/ast2600-mtmitchell.dts
arch/arm/dts/Makefile +1 -0
@@ -687,6 +687,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ ast2600-dcscm.dtb \ ast2600-fpga.dtb \ ast2600-intel.dtb \ + ast2600-mtmitchell.dtb \ ast2600-ncsi.dtb \ ast2600-p10bmc.dtb \ ast2600-pfr.dtb \
arch/arm/dts/ast2600-mtmitchell.dts new file +114 -0
114 lines not on this page · raw message
Signature · 1 line
2.35.1
Just a gentle ping on the patch.
Thank you and Happy New Year,
- Quan
Quoted 146 lines · Quan Nguyen
Add initial device tree for Aspeed AST2600-based Mt. Mitchell BMC found on AmpereOne's reference platform.
Signed-off-by Quan Nguyen <[email protected]>Reviewed-by Zev Weiss <[email protected]>---
v2:
- Fix tab issue [Zev Weiss]--- arch/arm/dts/Makefile | 1 + arch/arm/dts/ast2600-mtmitchell.dts | 114 ++++++++++++++++++++++++++++ 2 files changed, 115 insertions(+)create mode 100644
arch/arm/dts/ast2600-mtmitchell.dtsarch/arm/dts/Makefile +1
-0@@ -687,6 +687,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ ast2600-dcscm.dtb \ ast2600-fpga.dtb \ ast2600-intel.dtb \ + ast2600-mtmitchell.dtb \ ast2600-ncsi.dtb \ ast2600-p10bmc.dtb \ ast2600-pfr.dtb \arch/arm/dts/ast2600-mtmitchell.dts new file +114
-0@@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2022, Ampere Computing LLC + +/dts-v1/; + +#include "ast2600-u-boot.dtsi" + +/ { + model = "Ampere Mt.Mitchell BMC"; + compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + stdout-path = &uart5; + }; + + aliases { + spi0 = &fmc; + ethernet0 = &mac0; + }; + + cpus { + cpu@0 { + clock-frequency = <800000000>; + }; + cpu@1 { + clock-frequency = <800000000>; + }; + }; +}; + +&uart5 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&sdrammc { + clock-frequency = <400000000>; +}; + +&wdt1 { + status = "okay"; +}; + +&wdt2 { + status = "okay"; +}; + +&wdt3 { + status = "okay"; +}; + +&mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1_default &pinctrl_mdio2_default + &pinctrl_mdio3_default &pinctrl_mdio4_default>; + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&fmc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fmcquad_default>; + + flash@0 { + compatible = "spi-flash", "sst,w25q256"; + status = "okay"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + + flash@1 { + compatible = "spi-flash", "sst,w25q256"; + status = "okay"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&scu { + mac0-clk-delay = <0x10 0x0a + 0x10 0x10 + 0x10 0x10>; +}; + +&hace { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&acry { + u-boot,dm-pre-reloc; + status = "okay"; +};
Dear reviewers,
Thank you a lot for the reviews and comments so far on the patch.
In fact, I'm still scratching my head and confused if this patch still needs some improvement or I just need to wait for it to get merged?
Thank you,
- Quan
Quoted 151 lines · Quan Nguyen
Just a gentle ping on the patch.
Thank you and Happy New Year,
- QuanQuoted 146 lines · Quan Nguyen
Add initial device tree for Aspeed AST2600-based Mt. Mitchell BMC found on AmpereOne's reference platform.
Signed-off-by Quan Nguyen <[email protected]>Reviewed-by Zev Weiss <[email protected]>---
v2:
- Fix tab issue [Zev Weiss]
---
arch/arm/dts/Makefile | 1 +arch/arm/dts/ast2600-mtmitchell.dts| 114 ++++++++++++++++++++++++++++2 files changed, 115 insertions(+)create mode 100644
arch/arm/dts/ast2600-mtmitchell.dtsarch/arm/dts/Makefile +1
-0@@ -687,6 +687,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ ast2600-dcscm.dtb \ ast2600-fpga.dtb \ ast2600-intel.dtb \ + ast2600-mtmitchell.dtb \ ast2600-ncsi.dtb \ ast2600-p10bmc.dtb \ ast2600-pfr.dtb \arch/arm/dts/ast2600-mtmitchell.dts new file +114
-0@@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2022, Ampere Computing LLC + +/dts-v1/; + +#include "ast2600-u-boot.dtsi" + +/ { + model = "Ampere Mt.Mitchell BMC"; + compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + stdout-path = &uart5; + }; + + aliases { + spi0 = &fmc; + ethernet0 = &mac0; + }; + + cpus { + cpu@0 { + clock-frequency = <800000000>; + }; + cpu@1 { + clock-frequency = <800000000>; + }; + }; +}; + +&uart5 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&sdrammc { + clock-frequency = <400000000>; +}; + +&wdt1 { + status = "okay"; +}; + +&wdt2 { + status = "okay"; +}; + +&wdt3 { + status = "okay"; +}; + +&mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mdio1_default &pinctrl_mdio2_default + &pinctrl_mdio3_default &pinctrl_mdio4_default>; + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <ðphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&fmc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fmcquad_default>; + + flash@0 { + compatible = "spi-flash", "sst,w25q256"; + status = "okay"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + + flash@1 { + compatible = "spi-flash", "sst,w25q256"; + status = "okay"; + spi-max-frequency = <50000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&scu { + mac0-clk-delay = <0x10 0x0a + 0x10 0x10 + 0x10 0x10>; +}; + +&hace { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&acry { + u-boot,dm-pre-reloc; + status = "okay"; +};