mpc83xx: enable the SATA interface on mpc837xemds board
PATCH v2 9/9 mpc83xx: enable the SATA interface on mpc837xemds board
Enable the first two SATA interfaces on MPC837xEMDS board, The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
Signed-off-by Dave Liu <[email protected]>
--- include/configs/MPC837XEMDS.h | 23 +++++++++++++++++++++++ 1 files changed, 23 insertions(+), 0 deletions(-)
include/configs/MPC837XEMDS.h +23 -0
@@ -338,6 +338,29 @@#define CONFIG_FSL_SERDES1_VDD_1V 1/* +* SATA +*/ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * General PCI * Addresses are mapped 1-1. */
Signature · 1 line
1.5.4.rc4