Skip to contentSkip to conversation

cpufreq: Add flag to auto-register as cooling device

PATCH Superseded Amit Kucheria 5 participants 23 messages Jan 28, 2019 – Jan 29, 2019

Subsystems (6)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover cpufreq: Add flag to auto-register as cooling device

Add a flag for cpufreq drivers to tell cpufreq core to auto-register themselves as a thermal cooling device.

There series converts over all the drivers except arm_big_little.c. Tested on SDM845 with the qcom-cpufreq-hw driver. Only compile-tested the others.

Things needing fixing (but not a blocker for the series):
- Look at how to detect that we're not in IKS mode in arm_big_little's .ready callback.

Chnages since v3:
- Got rid of wrapper function to register/unregister cooling devices. Directly call the function in cpufreq.c

Changes since v2:
- Get rid of #ifdef'ery and let the pointer exist in all cases
- Get rid of (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers' Kconfig

Changes since v1:
- Fix compilation failures with allmodconfig
- Get rid of #ifdef in cpufreq.c
- Removed miscellaneous patches and sent them separately
- Merged patches 1 and 2 from v1

Amit Kucheria (9):
thermal: cpu_cooling: Require thermal core to be compiled in
cpufreq: Auto-register the driver as a thermal cooling device if asked
cpufreq: qcom-hw: Register as a cpufreq cooling device
cpufreq: imx6q: Use auto-registration of thermal cooling device
cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device
cpufreq: mediatek: Use auto-registration of thermal cooling device
cpufreq: qoriq: Use auto-registration of thermal cooling device
cpufreq: scmi: Use auto-registration of thermal cooling device
cpufreq: scpi: Use auto-registration of thermal cooling device

 drivers/cpufreq/Kconfig            |  3 ---
 drivers/cpufreq/Kconfig.arm        |  5 -----
 drivers/cpufreq/cpufreq-dt.c       | 14 ++------------
 drivers/cpufreq/cpufreq.c          |  9 +++++++++
 drivers/cpufreq/imx6q-cpufreq.c    | 24 ++----------------------
 drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------
 drivers/cpufreq/qcom-cpufreq-hw.c  |  3 ++-
 drivers/cpufreq/qoriq-cpufreq.c    | 15 ++-------------
 drivers/cpufreq/scmi-cpufreq.c     | 14 ++------------
 drivers/cpufreq/scpi-cpufreq.c     | 14 ++------------
 drivers/thermal/Kconfig            |  1 +
 include/linux/cpufreq.h            |  9 +++++++++
 12 files changed, 33 insertions(+), 92 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v4 1/9 thermal: cpu_cooling: Require thermal core to be compiled in

The CPU cooling driver (cpu_cooling.c) allows the platform's cpufreq driver to register as a cooling device and cool down the platform by throttling the CPU frequency. In order to be able to auto-register a cpufreq driver as a cooling device from the cpufreq core, we need access to code inside cpu_cooling.c which, in turn, accesses code inside thermal core.

CPU_FREQ is a bool while THERMAL is tristate. In some configurations (e.g. allmodconfig), CONFIG_THERMAL ends up as a module while CONFIG_CPU_FREQ is compiled in. This leads to following error:

drivers/cpufreq/cpufreq.o: In function `cpufreq_offline':
cpufreq.c:(.text+0x407c): undefined reference to cpufreq_cooling_unregister' drivers/cpufreq/cpufreq.o: In function cpufreq_online':
cpufreq.c:(.text+0x70c0): undefined reference to `of_cpufreq_cooling_register'

Given that platforms using CPU_THERMAL usually want it compiled-in so it is available early in boot, make CPU_THERMAL depend on THERMAL being compiled-in instead of allowing it to be a module.

As a result of this change, get rid of the ugly (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers using CPU_THERMAL.

---
 drivers/cpufreq/Kconfig     | 3 ---
 drivers/cpufreq/Kconfig.arm | 5 -----
 drivers/thermal/Kconfig     | 1 +
 3 files changed, 1 insertion(+), 8 deletions(-)
drivers/cpufreq/Kconfig +0 -3
index 608af20a3494..b22e6bba71f1 100644
@@ -207,8 +207,6 @@ comment "CPU frequency scaling drivers"
 config CPUFREQ_DT
 	tristate "Generic DT based cpufreq driver"
 	depends on HAVE_CLK && OF
-	# if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
-	depends on !CPU_THERMAL || THERMAL
 	select CPUFREQ_DT_PLATDEV
 	select PM_OPP
 	help
@@ -327,7 +325,6 @@ endif
 config QORIQ_CPUFREQ
 	tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
 	depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64)
-	depends on !CPU_THERMAL || THERMAL
 	select CLK_QORIQ
 	help
 	  This adds the CPUFreq driver support for Freescale QorIQ SoCs
drivers/cpufreq/Kconfig.arm +0 -5
index 688f10227793..ca8567c3152c 100644
@@ -29,8 +29,6 @@ config ARM_ARMADA_37XX_CPUFREQ
 config ARM_BIG_LITTLE_CPUFREQ
 	tristate "Generic ARM big LITTLE CPUfreq driver"
 	depends on ARM_CPU_TOPOLOGY && HAVE_CLK
-	# if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
-	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
@@ -38,7 +36,6 @@ config ARM_BIG_LITTLE_CPUFREQ
 config ARM_SCPI_CPUFREQ
 	tristate "SCPI based CPUfreq driver"
 	depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
-	depends on !CPU_THERMAL || THERMAL
 	help
 	  This adds the CPUfreq driver support for ARM platforms using SCPI
 	  protocol for CPU power management.
@@ -93,7 +90,6 @@ config ARM_KIRKWOOD_CPUFREQ
 config ARM_MEDIATEK_CPUFREQ
 	tristate "CPU Frequency scaling support for MediaTek SoCs"
 	depends on ARCH_MEDIATEK && REGULATOR
-	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
 	  This adds the CPUFreq driver support for MediaTek SoCs.
@@ -233,7 +229,6 @@ config ARM_SA1110_CPUFREQ
 config ARM_SCMI_CPUFREQ
 	tristate "SCMI based CPUfreq driver"
 	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
-	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
 	  This adds the CPUfreq driver support for ARM platforms using SCMI
drivers/thermal/Kconfig +1 -0
index 30323426902e..58bb7d72dc2b 100644
@@ -152,6 +152,7 @@ config CPU_THERMAL
 	bool "generic cpu cooling support"
 	depends on CPU_FREQ
 	depends on THERMAL_OF
+	depends on THERMAL=y
 	help
 	  This implements the generic cpu cooling mechanism through frequency
 	  reduction. An ACPI version of this already exists
Signature · 1 line
2.17.1
#2 lore raw

PATCH v4 2/9 cpufreq: Auto-register the driver as a thermal cooling device if asked

In reply to Amit Kucheria

All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.

In order to allow this, we add a struct thermal_cooling_device pointer to struct cpufreq_policy so that drivers don't need to store it in a private data structure.

---
 drivers/cpufreq/cpufreq.c | 9 +++++++++
 include/linux/cpufreq.h   | 9 +++++++++
 2 files changed, 18 insertions(+)
drivers/cpufreq/cpufreq.c +9 -0
index e35a886e00bc..29ed78b0b77b 100644
@@ -19,6 +19,7 @@
 
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>
@@ -1318,6 +1319,9 @@ static int cpufreq_online(unsigned int cpu)
 	if (cpufreq_driver->ready)
 		cpufreq_driver->ready(policy);
 
+	if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV)
+		policy->cdev = of_cpufreq_cooling_register(policy);
+
 	pr_debug("initialization complete\n");
 
 	return 0;
@@ -1405,6 +1409,11 @@ static int cpufreq_offline(unsigned int cpu)
 		goto unlock;
 	}
 
+	if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV) {
+		cpufreq_cooling_unregister(policy->cdev);
+		policy->cdev = NULL;
+	}
+
 	if (cpufreq_driver->stop_cpu)
 		cpufreq_driver->stop_cpu(policy);
 
include/linux/cpufreq.h +9 -0
index bd7fbd6a4478..55ca61a64fc2 100644
@@ -151,6 +151,9 @@ struct cpufreq_policy {
 
 	/* For cpufreq driver's internal use */
 	void			*driver_data;
+
+	/* Pointer to the cooling device if used for thermal mitigation */
+	struct thermal_cooling_device *cdev;
 };
 
 /* Only for ACPI */
@@ -386,6 +389,12 @@ struct cpufreq_driver {
  */
 #define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING	BIT(6)
 
+/*
+ * Set by drivers that want the core to automatically register the cpufreq
+ * driver as a thermal cooling device.
+ */
+#define CPUFREQ_AUTO_REGISTER_COOLING_DEV	BIT(7)
+
 int cpufreq_register_driver(struct cpufreq_driver *driver_data);
 int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
 
Signature · 1 line
2.17.1
Reviewed-by on v4 2/9
#3 lore raw

Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked

Quoted 9 lines · Amit Kucheria

All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.

In order to allow this, we add a struct thermal_cooling_device pointer to struct cpufreq_policy so that drivers don't need to store it in a private data structure.

Quoted 6 lines

---

Quoted 66 lines
 drivers/cpufreq/cpufreq.c | 9 +++++++++
 include/linux/cpufreq.h   | 9 +++++++++
 2 files changed, 18 insertions(+)
drivers/cpufreq/cpufreq.c +9 -0
index e35a886e00bc..29ed78b0b77b 100644
@@ -19,6 +19,7 @@
 
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>
@@ -1318,6 +1319,9 @@ static int cpufreq_online(unsigned int cpu)
 	if (cpufreq_driver->ready)
 		cpufreq_driver->ready(policy);
 
+	if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV)
+		policy->cdev = of_cpufreq_cooling_register(policy);
+
 	pr_debug("initialization complete\n");
 
 	return 0;
@@ -1405,6 +1409,11 @@ static int cpufreq_offline(unsigned int cpu)
 		goto unlock;
 	}
 
+	if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV) {
+		cpufreq_cooling_unregister(policy->cdev);
+		policy->cdev = NULL;
+	}
+
 	if (cpufreq_driver->stop_cpu)
 		cpufreq_driver->stop_cpu(policy);
 
include/linux/cpufreq.h +9 -0
index bd7fbd6a4478..55ca61a64fc2 100644
@@ -151,6 +151,9 @@ struct cpufreq_policy {
 
 	/* For cpufreq driver's internal use */
 	void			*driver_data;
+
+	/* Pointer to the cooling device if used for thermal mitigation */
+	struct thermal_cooling_device *cdev;
 };
 
 /* Only for ACPI */
@@ -386,6 +389,12 @@ struct cpufreq_driver {
  */
 #define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING	BIT(6)
 
+/*
+ * Set by drivers that want the core to automatically register the cpufreq
+ * driver as a thermal cooling device.
+ */
+#define CPUFREQ_AUTO_REGISTER_COOLING_DEV	BIT(7)
+
 int cpufreq_register_driver(struct cpufreq_driver *driver_data);
 int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
 
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#4 lore raw

Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked

In reply to Amit Kucheria
Quoted 15 lines · Amit Kucheria

All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.

In order to allow this, we add a struct thermal_cooling_device pointer to struct cpufreq_policy so that drivers don't need to store it in a private data structure.

---

[ ... ]

include/linux/cpufreq.h struct cpufreq_driver { · line 397

Quoted 6 lines
include/linux/cpufreq.h +6 -0
+/*
+ * Set by drivers that want the core to automatically register the cpufreq
+ * driver as a thermal cooling device.
+ */
+#define CPUFREQ_AUTO_REGISTER_COOLING_DEV	BIT(7)
+

Isn't the CPUFREQ_IS_COOLING_DEV more appropriate? We define a property of the cpufreq driver and the resulting action is to auto-register, no?

Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#5 lore raw

Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked

Quoted 19 lines · CET Daniel Lezcano
Quoted 15 lines · Amit Kucheria

All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.

In order to allow this, we add a struct thermal_cooling_device pointer to struct cpufreq_policy so that drivers don't need to store it in a private data structure.

---

[ ... ]

Quoted 9 lines

include/linux/cpufreq.h struct cpufreq_driver { · line 397

Quoted 6 lines
include/linux/cpufreq.h +6 -0
+/*
+ * Set by drivers that want the core to automatically register the cpufreq
+ * driver as a thermal cooling device.
+ */
+#define CPUFREQ_AUTO_REGISTER_COOLING_DEV	BIT(7)
+

Isn't the CPUFREQ_IS_COOLING_DEV more appropriate? We define a property of the cpufreq driver and the resulting action is to auto-register, no?

Yes.

Cheers,
Rafael

#6 lore raw

Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked

Quoted 31 lines · Rafael J. Wysocki
Quoted 19 lines · CET Daniel Lezcano
Quoted 15 lines · Amit Kucheria

All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.

In order to allow this, we add a struct thermal_cooling_device pointer to struct cpufreq_policy so that drivers don't need to store it in a private data structure.

---

[ ... ]

Quoted 9 lines

include/linux/cpufreq.h struct cpufreq_driver { · line 397

Quoted 6 lines
include/linux/cpufreq.h +6 -0
+/*
+ * Set by drivers that want the core to automatically register the cpufreq
+ * driver as a thermal cooling device.
+ */
+#define CPUFREQ_AUTO_REGISTER_COOLING_DEV  BIT(7)
+

Isn't the CPUFREQ_IS_COOLING_DEV more appropriate? We define a property of the cpufreq driver and the resulting action is to auto-register, no?

Quoted 1 line

Yes.

OK, will send out another series with this change and the IS_ENABLED guards.

Thank you everyone for the review.

#7 lore raw

Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked

In reply to Amit Kucheria
Quoted 33 lines · Amit Kucheria

All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.

In order to allow this, we add a struct thermal_cooling_device pointer to struct cpufreq_policy so that drivers don't need to store it in a private data structure.

---
 drivers/cpufreq/cpufreq.c | 9 +++++++++
 include/linux/cpufreq.h   | 9 +++++++++
 2 files changed, 18 insertions(+)
drivers/cpufreq/cpufreq.c +1 -0
index e35a886e00bc..29ed78b0b77b 100644
@@ -19,6 +19,7 @@
 
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>

drivers/cpufreq/cpufreq.c static int cpufreq_online(unsigned int cpu) · line 1322

Quoted 4 lines
drivers/cpufreq/cpufreq.c +1 -0
@@ -1318,6 +1319,9 @@ static int cpufreq_online(unsigned int cpu)
        if (cpufreq_driver->ready)
                cpufreq_driver->ready(policy);
 
+       if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV)

It would be good to use IS_ENABLED(CONFIG_CPU_THERMAL) here and below as a hint for the compiler.

Quoted 17 lines
drivers/cpufreq/cpufreq.c +7 -0
+               policy->cdev = of_cpufreq_cooling_register(policy);
+
        pr_debug("initialization complete\n");
 
        return 0;
@@ -1405,6 +1409,11 @@ static int cpufreq_offline(unsigned int cpu)
                goto unlock;
        }
 
+       if (cpufreq_driver->flags & CPUFREQ_AUTO_REGISTER_COOLING_DEV) {
+               cpufreq_cooling_unregister(policy->cdev);
+               policy->cdev = NULL;
+       }
+
        if (cpufreq_driver->stop_cpu)
                cpufreq_driver->stop_cpu(policy);
 
#8 lore raw

PATCH v4 3/9 cpufreq: qcom-hw: Register as a cpufreq cooling device

In reply to Amit Kucheria

Add the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow the cpufreq core to auto-register the driver as a cooling device.

---
 drivers/cpufreq/qcom-cpufreq-hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/cpufreq/qcom-cpufreq-hw.c +2 -1
index d83939a1b3d4..ed32849a3d40 100644
@@ -231,7 +231,8 @@ static struct freq_attr *qcom_cpufreq_hw_attr[] = {
 
 static struct cpufreq_driver cpufreq_qcom_hw_driver = {
 	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+			  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= qcom_cpufreq_hw_target_index,
 	.get		= qcom_cpufreq_hw_get,
Signature · 1 line
2.17.1
Reviewed-by on v4 3/9
#9 lore raw

Re: [PATCH v4 3/9] cpufreq: qcom-hw: Register as a cpufreq cooling device

Quoted 7 lines · Amit Kucheria

Add the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow the cpufreq core to auto-register the driver as a cooling device.

Quoted 19 lines
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/cpufreq/qcom-cpufreq-hw.c +2 -1
index d83939a1b3d4..ed32849a3d40 100644
@@ -231,7 +231,8 @@ static struct freq_attr *qcom_cpufreq_hw_attr[] = {
 
 static struct cpufreq_driver cpufreq_qcom_hw_driver = {
 	.flags		= CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+			  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= qcom_cpufreq_hw_target_index,
 	.get		= qcom_cpufreq_hw_get,
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#10 lore raw

PATCH v4 4/9 cpufreq: imx6q: Use auto-registration of thermal cooling device

In reply to Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

---
 drivers/cpufreq/imx6q-cpufreq.c | 24 ++----------------------
 1 file changed, 2 insertions(+), 22 deletions(-)
drivers/cpufreq/imx6q-cpufreq.c +2 -22
index 9fedf627e000..9935df234fa1 100644
@@ -9,7 +9,6 @@
 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
@@ -52,7 +51,6 @@ static struct clk_bulk_data clks[] = {
 };
 
 static struct device *cpu_dev;
-static struct thermal_cooling_device *cdev;
 static bool free_opp;
 static struct cpufreq_frequency_table *freq_table;
 static unsigned int max_freq;
@@ -193,16 +191,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	return 0;
 }
 
-static void imx6q_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	cdev = of_cpufreq_cooling_register(policy);
-
-	if (!cdev)
-		dev_err(cpu_dev,
-			"running cpufreq without cooling device: %ld\n",
-			PTR_ERR(cdev));
-}
-
 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret;
@@ -214,22 +202,14 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 	return ret;
 }
 
-static int imx6q_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_cooling_unregister(cdev);
-
-	return 0;
-}
-
 static struct cpufreq_driver imx6q_cpufreq_driver = {
-	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = imx6q_set_target,
 	.get = cpufreq_generic_get,
 	.init = imx6q_cpufreq_init,
-	.exit = imx6q_cpufreq_exit,
 	.name = "imx6q-cpufreq",
-	.ready = imx6q_cpufreq_ready,
 	.attr = cpufreq_generic_attr,
 	.suspend = cpufreq_generic_suspend,
 };
Signature · 1 line
2.17.1
Reviewed-by on v4 4/9
#11 lore raw

Re: [PATCH v4 4/9] cpufreq: imx6q: Use auto-registration of thermal cooling device

Quoted 6 lines · Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Quoted 67 lines
---
 drivers/cpufreq/imx6q-cpufreq.c | 24 ++----------------------
 1 file changed, 2 insertions(+), 22 deletions(-)
drivers/cpufreq/imx6q-cpufreq.c +2 -22
index 9fedf627e000..9935df234fa1 100644
@@ -9,7 +9,6 @@
 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
@@ -52,7 +51,6 @@ static struct clk_bulk_data clks[] = {
 };
 
 static struct device *cpu_dev;
-static struct thermal_cooling_device *cdev;
 static bool free_opp;
 static struct cpufreq_frequency_table *freq_table;
 static unsigned int max_freq;
@@ -193,16 +191,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	return 0;
 }
 
-static void imx6q_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	cdev = of_cpufreq_cooling_register(policy);
-
-	if (!cdev)
-		dev_err(cpu_dev,
-			"running cpufreq without cooling device: %ld\n",
-			PTR_ERR(cdev));
-}
-
 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret;
@@ -214,22 +202,14 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 	return ret;
 }
 
-static int imx6q_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_cooling_unregister(cdev);
-
-	return 0;
-}
-
 static struct cpufreq_driver imx6q_cpufreq_driver = {
-	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = imx6q_set_target,
 	.get = cpufreq_generic_get,
 	.init = imx6q_cpufreq_init,
-	.exit = imx6q_cpufreq_exit,
 	.name = "imx6q-cpufreq",
-	.ready = imx6q_cpufreq_ready,
 	.attr = cpufreq_generic_attr,
 	.suspend = cpufreq_generic_suspend,
 };
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#12 lore raw

PATCH v4 5/9 cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device

In reply to Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

---
 drivers/cpufreq/cpufreq-dt.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/cpufreq-dt.c +2 -12
index e58bfcb1169e..2a4c4ea7980b 100644
@@ -13,7 +13,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
@@ -30,7 +29,6 @@
 struct private_data {
 	struct opp_table *opp_table;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 	const char *reg_name;
 	bool have_static_opps;
 };
@@ -301,7 +299,6 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct private_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	if (priv->have_static_opps)
 		dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
@@ -314,21 +311,14 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct private_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver dt_cpufreq_driver = {
-	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = set_target,
 	.get = cpufreq_generic_get,
 	.init = cpufreq_init,
 	.exit = cpufreq_exit,
-	.ready = cpufreq_ready,
 	.name = "cpufreq-dt",
 	.attr = cpufreq_dt_attr,
 	.suspend = cpufreq_generic_suspend,
Signature · 1 line
2.17.1
Reviewed-by on v4 5/9
#13 lore raw

Re: [PATCH v4 5/9] cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device

Quoted 6 lines · Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Quoted 57 lines
---
 drivers/cpufreq/cpufreq-dt.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/cpufreq-dt.c +2 -12
index e58bfcb1169e..2a4c4ea7980b 100644
@@ -13,7 +13,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/err.h>
@@ -30,7 +29,6 @@
 struct private_data {
 	struct opp_table *opp_table;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 	const char *reg_name;
 	bool have_static_opps;
 };
@@ -301,7 +299,6 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct private_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	if (priv->have_static_opps)
 		dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
@@ -314,21 +311,14 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct private_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver dt_cpufreq_driver = {
-	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = set_target,
 	.get = cpufreq_generic_get,
 	.init = cpufreq_init,
 	.exit = cpufreq_exit,
-	.ready = cpufreq_ready,
 	.name = "cpufreq-dt",
 	.attr = cpufreq_dt_attr,
 	.suspend = cpufreq_generic_suspend,
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#14 lore raw

PATCH v4 6/9 cpufreq: mediatek: Use auto-registration of thermal cooling device

In reply to Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

---
 drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/mediatek-cpufreq.c +2 -12
index eb8920d39818..9a937f4c63e7 100644
@@ -14,7 +14,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/module.h>
@@ -48,7 +47,6 @@ struct mtk_cpu_dvfs_info {
 	struct regulator *sram_reg;
 	struct clk *cpu_clk;
 	struct clk *inter_clk;
-	struct thermal_cooling_device *cdev;
 	struct list_head list_head;
 	int intermediate_voltage;
 	bool need_voltage_tracking;
@@ -307,13 +305,6 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 
 #define DYNAMIC_POWER "dynamic-power-coefficient"
 
-static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct mtk_cpu_dvfs_info *info = policy->driver_data;
-
-	info->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 {
 	struct device *cpu_dev;
@@ -472,7 +463,6 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct mtk_cpu_dvfs_info *info = policy->driver_data;
 
-	cpufreq_cooling_unregister(info->cdev);
 	dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table);
 
 	return 0;
@@ -480,13 +470,13 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver mtk_cpufreq_driver = {
 	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = mtk_cpufreq_set_target,
 	.get = cpufreq_generic_get,
 	.init = mtk_cpufreq_init,
 	.exit = mtk_cpufreq_exit,
-	.ready = mtk_cpufreq_ready,
 	.name = "mtk-cpufreq",
 	.attr = cpufreq_generic_attr,
 };
Signature · 1 line
2.17.1
Reviewed-by on v4 6/9
#15 lore raw

Re: [PATCH v4 6/9] cpufreq: mediatek: Use auto-registration of thermal cooling device

Quoted 6 lines · Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Quoted 63 lines
---
 drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/mediatek-cpufreq.c +2 -12
index eb8920d39818..9a937f4c63e7 100644
@@ -14,7 +14,6 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
-#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/module.h>
@@ -48,7 +47,6 @@ struct mtk_cpu_dvfs_info {
 	struct regulator *sram_reg;
 	struct clk *cpu_clk;
 	struct clk *inter_clk;
-	struct thermal_cooling_device *cdev;
 	struct list_head list_head;
 	int intermediate_voltage;
 	bool need_voltage_tracking;
@@ -307,13 +305,6 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 
 #define DYNAMIC_POWER "dynamic-power-coefficient"
 
-static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct mtk_cpu_dvfs_info *info = policy->driver_data;
-
-	info->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 {
 	struct device *cpu_dev;
@@ -472,7 +463,6 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct mtk_cpu_dvfs_info *info = policy->driver_data;
 
-	cpufreq_cooling_unregister(info->cdev);
 	dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table);
 
 	return 0;
@@ -480,13 +470,13 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver mtk_cpufreq_driver = {
 	.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
+		 CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+		 CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = mtk_cpufreq_set_target,
 	.get = cpufreq_generic_get,
 	.init = mtk_cpufreq_init,
 	.exit = mtk_cpufreq_exit,
-	.ready = mtk_cpufreq_ready,
 	.name = "mtk-cpufreq",
 	.attr = cpufreq_generic_attr,
 };
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#16 lore raw

PATCH v4 7/9 cpufreq: qoriq: Use auto-registration of thermal cooling device

In reply to Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

---
 drivers/cpufreq/qoriq-cpufreq.c | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)
drivers/cpufreq/qoriq-cpufreq.c +2 -13
index 3d773f64b4df..b206e6cb55f0 100644
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -31,7 +30,6 @@
 struct cpu_data {
 	struct clk **pclk;
 	struct cpufreq_frequency_table *table;
-	struct thermal_cooling_device *cdev;
 };
 
 /*
@@ -239,7 +237,6 @@ static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
 	struct cpu_data *data = policy->driver_data;
 
-	cpufreq_cooling_unregister(data->cdev);
 	kfree(data->pclk);
 	kfree(data->table);
 	kfree(data);
@@ -258,23 +255,15 @@ static int qoriq_cpufreq_target(struct cpufreq_policy *policy,
 	return clk_set_parent(policy->clk, parent);
 }
 
-
-static void qoriq_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct cpu_data *cpud = policy->driver_data;
-
-	cpud->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver qoriq_cpufreq_driver = {
 	.name		= "qoriq_cpufreq",
-	.flags		= CPUFREQ_CONST_LOOPS,
+	.flags		= CPUFREQ_CONST_LOOPS |
+			  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.init		= qoriq_cpufreq_cpu_init,
 	.exit		= qoriq_cpufreq_cpu_exit,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= qoriq_cpufreq_target,
 	.get		= cpufreq_generic_get,
-	.ready		= qoriq_cpufreq_ready,
 	.attr		= cpufreq_generic_attr,
 };
 
Signature · 1 line
2.17.1
Reviewed-by on v4 7/9
#17 lore raw

Re: [PATCH v4 7/9] cpufreq: qoriq: Use auto-registration of thermal cooling device

Quoted 6 lines · Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Quoted 59 lines
---
 drivers/cpufreq/qoriq-cpufreq.c | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)
drivers/cpufreq/qoriq-cpufreq.c +2 -13
index 3d773f64b4df..b206e6cb55f0 100644
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -31,7 +30,6 @@
 struct cpu_data {
 	struct clk **pclk;
 	struct cpufreq_frequency_table *table;
-	struct thermal_cooling_device *cdev;
 };
 
 /*
@@ -239,7 +237,6 @@ static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 {
 	struct cpu_data *data = policy->driver_data;
 
-	cpufreq_cooling_unregister(data->cdev);
 	kfree(data->pclk);
 	kfree(data->table);
 	kfree(data);
@@ -258,23 +255,15 @@ static int qoriq_cpufreq_target(struct cpufreq_policy *policy,
 	return clk_set_parent(policy->clk, parent);
 }
 
-
-static void qoriq_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct cpu_data *cpud = policy->driver_data;
-
-	cpud->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver qoriq_cpufreq_driver = {
 	.name		= "qoriq_cpufreq",
-	.flags		= CPUFREQ_CONST_LOOPS,
+	.flags		= CPUFREQ_CONST_LOOPS |
+			  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.init		= qoriq_cpufreq_cpu_init,
 	.exit		= qoriq_cpufreq_cpu_exit,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= qoriq_cpufreq_target,
 	.get		= cpufreq_generic_get,
-	.ready		= qoriq_cpufreq_ready,
 	.attr		= cpufreq_generic_attr,
 };
 
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#18 lore raw

PATCH v4 8/9 cpufreq: scmi: Use auto-registration of thermal cooling device

In reply to Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

---
 drivers/cpufreq/scmi-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/scmi-cpufreq.c +2 -12
index 242c3370544e..b19e9d129f8f 100644
@@ -11,7 +11,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/pm_opp.h>
@@ -22,7 +21,6 @@
 struct scmi_data {
 	int domain_id;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static const struct scmi_handle *handle;
@@ -185,7 +183,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scmi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
 	dev_pm_opp_remove_all_dynamic(priv->cpu_dev);
@@ -193,17 +190,11 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scmi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scmi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scmi_cpufreq_driver = {
 	.name	= "scmi",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.target_index	= scmi_cpufreq_set_target,
@@ -211,7 +202,6 @@ static struct cpufreq_driver scmi_cpufreq_driver = {
 	.get	= scmi_cpufreq_get_rate,
 	.init	= scmi_cpufreq_init,
 	.exit	= scmi_cpufreq_exit,
-	.ready	= scmi_cpufreq_ready,
 };
 
 static int scmi_cpufreq_probe(struct scmi_device *sdev)
Signature · 1 line
2.17.1
Reviewed-by on v4 8/9
#19 lore raw

Re: [PATCH v4 8/9] cpufreq: scmi: Use auto-registration of thermal cooling device

Quoted 7 lines · Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Quoted 61 lines
---
 drivers/cpufreq/scmi-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/scmi-cpufreq.c +2 -12
index 242c3370544e..b19e9d129f8f 100644
@@ -11,7 +11,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/pm_opp.h>
@@ -22,7 +21,6 @@
 struct scmi_data {
 	int domain_id;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static const struct scmi_handle *handle;
@@ -185,7 +183,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scmi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
 	dev_pm_opp_remove_all_dynamic(priv->cpu_dev);
@@ -193,17 +190,11 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scmi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scmi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scmi_cpufreq_driver = {
 	.name	= "scmi",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.target_index	= scmi_cpufreq_set_target,
@@ -211,7 +202,6 @@ static struct cpufreq_driver scmi_cpufreq_driver = {
 	.get	= scmi_cpufreq_get_rate,
 	.init	= scmi_cpufreq_init,
 	.exit	= scmi_cpufreq_exit,
-	.ready	= scmi_cpufreq_ready,
 };
 
 static int scmi_cpufreq_probe(struct scmi_device *sdev)
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
#20 lore raw

PATCH v4 9/9 cpufreq: scpi: Use auto-registration of thermal cooling device

In reply to Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

---
 drivers/cpufreq/scpi-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/scpi-cpufreq.c +2 -12
index 99449738faa4..82420e8e5f0d 100644
@@ -22,7 +22,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
@@ -34,7 +33,6 @@
 struct scpi_data {
 	struct clk *clk;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static struct scpi_ops *scpi_ops;
@@ -186,7 +184,6 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scpi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	clk_put(priv->clk);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
@@ -195,23 +192,16 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scpi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scpi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scpi_cpufreq_driver = {
 	.name	= "scpi-cpufreq",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.get	= scpi_cpufreq_get_rate,
 	.init	= scpi_cpufreq_init,
 	.exit	= scpi_cpufreq_exit,
-	.ready	= scpi_cpufreq_ready,
 	.target_index	= scpi_cpufreq_set_target,
 };
 
Signature · 1 line
2.17.1
Reviewed-by on v4 9/9
#21 lore raw

Re: [PATCH v4 9/9] cpufreq: scpi: Use auto-registration of thermal cooling device

Quoted 7 lines · Amit Kucheria

Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Quoted 59 lines
---
 drivers/cpufreq/scpi-cpufreq.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/scpi-cpufreq.c +2 -12
index 99449738faa4..82420e8e5f0d 100644
@@ -22,7 +22,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
@@ -34,7 +33,6 @@
 struct scpi_data {
 	struct clk *clk;
 	struct device *cpu_dev;
-	struct thermal_cooling_device *cdev;
 };
 
 static struct scpi_ops *scpi_ops;
@@ -186,7 +184,6 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 {
 	struct scpi_data *priv = policy->driver_data;
 
-	cpufreq_cooling_unregister(priv->cdev);
 	clk_put(priv->clk);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	kfree(priv);
@@ -195,23 +192,16 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void scpi_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	struct scpi_data *priv = policy->driver_data;
-
-	priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver scpi_cpufreq_driver = {
 	.name	= "scpi-cpufreq",
 	.flags	= CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
-		  CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+		  CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+		  CPUFREQ_AUTO_REGISTER_COOLING_DEV,
 	.verify	= cpufreq_generic_frequency_table_verify,
 	.attr	= cpufreq_generic_attr,
 	.get	= scpi_cpufreq_get_rate,
 	.init	= scpi_cpufreq_init,
 	.exit	= scpi_cpufreq_exit,
-	.ready	= scpi_cpufreq_ready,
 	.target_index	= scpi_cpufreq_set_target,
 };
 
Signature · 5 lines
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
maintainer Acked-by on the v4 series
#22 lore raw
In reply to Amit Kucheria
Quoted 7 lines · Amit Kucheria

Add a flag for cpufreq drivers to tell cpufreq core to auto-register themselves as a thermal cooling device.

There series converts over all the drivers except arm_big_little.c. Tested on SDM845 with the qcom-cpufreq-hw driver. Only compile-tested the others.

Quoted 7 lines

Things needing fixing (but not a blocker for the series):
- Look at how to detect that we're not in IKS mode in arm_big_little's .ready callback.

Chnages since v3:
- Got rid of wrapper function to register/unregister cooling devices. Directly call the function in cpufreq.c

Signature · 1 line
viresh