cpufreq: Add flag to auto-register as cooling device
Subsystems (6)
v4 cover cpufreq: Add flag to auto-register as cooling device
Add a flag for cpufreq drivers to tell cpufreq core to auto-register themselves as a thermal cooling device.
There series converts over all the drivers except arm_big_little.c. Tested on SDM845 with the qcom-cpufreq-hw driver. Only compile-tested the others.
Things needing fixing (but not a blocker for the series):
- Look at how to detect that we're not in IKS mode in arm_big_little's .ready callback.
Chnages since v3:
- Got rid of wrapper function to register/unregister cooling devices. Directly call the function in cpufreq.c
Changes since v2:
- Get rid of #ifdef'ery and let the pointer exist in all cases
- Get rid of (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers' Kconfig
Changes since v1:
- Fix compilation failures with allmodconfig
- Get rid of #ifdef in cpufreq.c
- Removed miscellaneous patches and sent them separately
- Merged patches 1 and 2 from v1
Amit Kucheria (9):
thermal: cpu_cooling: Require thermal core to be compiled in
cpufreq: Auto-register the driver as a thermal cooling device if asked
cpufreq: qcom-hw: Register as a cpufreq cooling device
cpufreq: imx6q: Use auto-registration of thermal cooling device
cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device
cpufreq: mediatek: Use auto-registration of thermal cooling device
cpufreq: qoriq: Use auto-registration of thermal cooling device
cpufreq: scmi: Use auto-registration of thermal cooling device
cpufreq: scpi: Use auto-registration of thermal cooling device
drivers/cpufreq/Kconfig | 3 --- drivers/cpufreq/Kconfig.arm | 5 ----- drivers/cpufreq/cpufreq-dt.c | 14 ++------------ drivers/cpufreq/cpufreq.c | 9 +++++++++ drivers/cpufreq/imx6q-cpufreq.c | 24 ++---------------------- drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------ drivers/cpufreq/qcom-cpufreq-hw.c | 3 ++- drivers/cpufreq/qoriq-cpufreq.c | 15 ++------------- drivers/cpufreq/scmi-cpufreq.c | 14 ++------------ drivers/cpufreq/scpi-cpufreq.c | 14 ++------------ drivers/thermal/Kconfig | 1 + include/linux/cpufreq.h | 9 +++++++++ 12 files changed, 33 insertions(+), 92 deletions(-)
Signature · 1 line
2.17.1
PATCH v4 1/9 thermal: cpu_cooling: Require thermal core to be compiled in
The CPU cooling driver (cpu_cooling.c) allows the platform's cpufreq driver to register as a cooling device and cool down the platform by throttling the CPU frequency. In order to be able to auto-register a cpufreq driver as a cooling device from the cpufreq core, we need access to code inside cpu_cooling.c which, in turn, accesses code inside thermal core.
CPU_FREQ is a bool while THERMAL is tristate. In some configurations (e.g. allmodconfig), CONFIG_THERMAL ends up as a module while CONFIG_CPU_FREQ is compiled in. This leads to following error:
drivers/cpufreq/cpufreq.o: In function `cpufreq_offline':
cpufreq.c:(.text+0x407c): undefined reference to cpufreq_cooling_unregister' drivers/cpufreq/cpufreq.o: In function cpufreq_online':
cpufreq.c:(.text+0x70c0): undefined reference to `of_cpufreq_cooling_register'
Given that platforms using CPU_THERMAL usually want it compiled-in so it is available early in boot, make CPU_THERMAL depend on THERMAL being compiled-in instead of allowing it to be a module.
As a result of this change, get rid of the ugly (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers using CPU_THERMAL.
--- drivers/cpufreq/Kconfig | 3 --- drivers/cpufreq/Kconfig.arm | 5 ----- drivers/thermal/Kconfig | 1 + 3 files changed, 1 insertion(+), 8 deletions(-)
drivers/cpufreq/Kconfig +0 -3
@@ -207,8 +207,6 @@ comment "CPU frequency scaling drivers" config CPUFREQ_DT tristate "Generic DT based cpufreq driver" depends on HAVE_CLK && OF - # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y: - depends on !CPU_THERMAL || THERMAL select CPUFREQ_DT_PLATDEV select PM_OPP help
@@ -327,7 +325,6 @@ endif config QORIQ_CPUFREQ tristate "CPU frequency scaling driver for Freescale QorIQ SoCs" depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64) - depends on !CPU_THERMAL || THERMAL select CLK_QORIQ help This adds the CPUFreq driver support for Freescale QorIQ SoCs
drivers/cpufreq/Kconfig.arm +0 -5
@@ -29,8 +29,6 @@ config ARM_ARMADA_37XX_CPUFREQ config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" depends on ARM_CPU_TOPOLOGY && HAVE_CLK - # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y - depends on !CPU_THERMAL || THERMAL select PM_OPP help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
@@ -38,7 +36,6 @@ config ARM_BIG_LITTLE_CPUFREQ config ARM_SCPI_CPUFREQ tristate "SCPI based CPUfreq driver" depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI - depends on !CPU_THERMAL || THERMAL help This adds the CPUfreq driver support for ARM platforms using SCPI protocol for CPU power management.
@@ -93,7 +90,6 @@ config ARM_KIRKWOOD_CPUFREQ config ARM_MEDIATEK_CPUFREQ tristate "CPU Frequency scaling support for MediaTek SoCs" depends on ARCH_MEDIATEK && REGULATOR - depends on !CPU_THERMAL || THERMAL select PM_OPP help This adds the CPUFreq driver support for MediaTek SoCs.
@@ -233,7 +229,6 @@ config ARM_SA1110_CPUFREQ config ARM_SCMI_CPUFREQ tristate "SCMI based CPUfreq driver" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST - depends on !CPU_THERMAL || THERMAL select PM_OPP help This adds the CPUfreq driver support for ARM platforms using SCMI
drivers/thermal/Kconfig +1 -0
@@ -152,6 +152,7 @@ config CPU_THERMAL bool "generic cpu cooling support" depends on CPU_FREQ depends on THERMAL_OF + depends on THERMAL=y help This implements the generic cpu cooling mechanism through frequency reduction. An ACPI version of this already exists
Signature · 1 line
2.17.1
PATCH v4 2/9 cpufreq: Auto-register the driver as a thermal cooling device if asked
In reply to Amit KucheriaAll cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.
In order to allow this, we add a struct thermal_cooling_device pointer to struct cpufreq_policy so that drivers don't need to store it in a private data structure.
--- drivers/cpufreq/cpufreq.c | 9 +++++++++ include/linux/cpufreq.h | 9 +++++++++ 2 files changed, 18 insertions(+)
drivers/cpufreq/cpufreq.c +9 -0
@@ -19,6 +19,7 @@#include <linux/cpu.h> #include <linux/cpufreq.h> +#include <linux/cpu_cooling.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/init.h>
@@ -1318,6 +1319,9 @@ static int cpufreq_online(unsigned int cpu)if (cpufreq_driver->ready) cpufreq_driver->ready (policy); +if (cpufreq_driver->flags &CPUFREQ_AUTO_REGISTER_COOLING_DEV ) + policy->cdev =of_cpufreq_cooling_register (policy); +pr_debug ("initialization complete\n" );return 0 ;
@@ -1405,6 +1409,11 @@ static int cpufreq_offline(unsigned int cpu) goto unlock; } +if (cpufreq_driver->flags &CPUFREQ_AUTO_REGISTER_COOLING_DEV ) { +cpufreq_cooling_unregister (policy->cdev); + policy->cdev =NULL ; + } +if (cpufreq_driver->stop_cpu) cpufreq_driver->stop_cpu (policy);
include/linux/cpufreq.h +9 -0
@@ -151,6 +151,9 @@ struct cpufreq_policy {/* For cpufreq driver's internal use */ void *driver_data; + +/* Pointer to the cooling device if used for thermal mitigation */ +struct thermal_cooling_device *cdev; };/* Only for ACPI */
@@ -386,6 +389,12 @@ struct cpufreq_driver {*/ #define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING BIT(6) +/* +* Set by drivers that want the core to automatically register the cpufreq +* driver as a thermal cooling device. +*/ +#define CPUFREQ_AUTO_REGISTER_COOLING_DEV BIT(7) +int cpufreq_register_driver (struct cpufreq_driver *driver_data);int cpufreq_unregister_driver (struct cpufreq_driver *driver_data);
Signature · 1 line
2.17.1
Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked
Quoted 9 lines · Amit Kucheria
All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.
In order to allow this, we add a struct
thermal_cooling_devicepointer to structcpufreq_policyso that drivers don't need to store it in a private data structure.
Quoted 6 lines
Suggested-by Stephen Boyd <[email protected]>Suggested-by Viresh Kumar <[email protected]>Signed-off-by Amit Kucheria <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>Tested-by Matthias Kaehlcke <[email protected]>---
Quoted 66 lines
drivers/cpufreq/cpufreq.c | 9 +++++++++ include/linux/cpufreq.h | 9 +++++++++ 2 files changed, 18 insertions(+)drivers/cpufreq/cpufreq.c +9
-0@@ -19,6 +19,7 @@#include <linux/cpu.h> #include <linux/cpufreq.h> +#include <linux/cpu_cooling.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/init.h> @@ -1318,6 +1319,9 @@ static int cpufreq_online(unsigned int cpu)if (cpufreq_driver->ready) cpufreq_driver->ready (policy); +if (cpufreq_driver->flags &CPUFREQ_AUTO_REGISTER_COOLING_DEV ) + policy->cdev =of_cpufreq_cooling_register (policy); +pr_debug ("initialization complete\n" );return 0 ;@@ -1405,6 +1409,11 @@ static int cpufreq_offline(unsigned int cpu) goto unlock; } +if (cpufreq_driver->flags &CPUFREQ_AUTO_REGISTER_COOLING_DEV ) { +cpufreq_cooling_unregister (policy->cdev); + policy->cdev =NULL ; + } +if (cpufreq_driver->stop_cpu) cpufreq_driver->stop_cpu (policy);include/linux/cpufreq.h +9
-0@@ -151,6 +151,9 @@ struct cpufreq_policy {/* For cpufreq driver's internal use */ void *driver_data; + +/* Pointer to the cooling device if used for thermal mitigation */ +struct thermal_cooling_device *cdev; };/* Only for ACPI */ @@ -386,6 +389,12 @@ struct cpufreq_driver {*/ #define CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING BIT(6) +/* +* Set by drivers that want the core to automatically register the cpufreq +* driver as a thermal cooling device. +*/ +#define CPUFREQ_AUTO_REGISTER_COOLING_DEV BIT(7) +int cpufreq_register_driver (struct cpufreq_driver *driver_data);int cpufreq_unregister_driver (struct cpufreq_driver *driver_data);
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked
In reply to Amit KucheriaQuoted 15 lines · Amit Kucheria
All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.
In order to allow this, we add a struct
thermal_cooling_devicepointer to structcpufreq_policyso that drivers don't need to store it in a private data structure.Suggested-by Stephen Boyd <[email protected]>Suggested-by Viresh Kumar <[email protected]>Signed-off-by Amit Kucheria <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>Tested-by Matthias Kaehlcke <[email protected]>---
[ ... ]
include/linux/cpufreq.h struct cpufreq_driver { · line 397
Quoted 6 lines
include/linux/cpufreq.h +6
-0+/* +* Set by drivers that want the core to automatically register the cpufreq +* driver as a thermal cooling device. +*/ +#define CPUFREQ_AUTO_REGISTER_COOLING_DEV BIT(7) +
Isn't the CPUFREQ_IS_COOLING_DEV more appropriate? We define a property of the cpufreq driver and the resulting action is to auto-register, no?
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked
Quoted 19 lines · CET Daniel Lezcano
Quoted 15 lines · Amit Kucheria
All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.
In order to allow this, we add a struct
thermal_cooling_devicepointer to structcpufreq_policyso that drivers don't need to store it in a private data structure.Suggested-by Stephen Boyd <[email protected]>Suggested-by Viresh Kumar <[email protected]>Signed-off-by Amit Kucheria <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>Tested-by Matthias Kaehlcke <[email protected]>---
[ ... ]
Quoted 9 lines
include/linux/cpufreq.h struct cpufreq_driver { · line 397
Quoted 6 lines
include/linux/cpufreq.h +6
-0+/* +* Set by drivers that want the core to automatically register the cpufreq +* driver as a thermal cooling device. +*/ +#define CPUFREQ_AUTO_REGISTER_COOLING_DEV BIT(7) +Isn't the
CPUFREQ_IS_COOLING_DEVmore appropriate? We define a property of the cpufreq driver and the resulting action is to auto-register, no?
Yes.
Cheers,
Rafael
Re: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked
Quoted 31 lines · Rafael J. Wysocki
Quoted 19 lines · CET Daniel Lezcano
Quoted 15 lines · Amit Kucheria
All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.
In order to allow this, we add a struct
thermal_cooling_devicepointer to structcpufreq_policyso that drivers don't need to store it in a private data structure.Suggested-by Stephen Boyd <[email protected]>Suggested-by Viresh Kumar <[email protected]>Signed-off-by Amit Kucheria <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>Tested-by Matthias Kaehlcke <[email protected]>---
[ ... ]
Quoted 9 lines
include/linux/cpufreq.h struct cpufreq_driver { · line 397
Quoted 6 lines
include/linux/cpufreq.h +6
-0+/* +* Set by drivers that want the core to automatically register the cpufreq +* driver as a thermal cooling device. +*/ +#define CPUFREQ_AUTO_REGISTER_COOLING_DEV BIT(7) +Isn't the
CPUFREQ_IS_COOLING_DEVmore appropriate? We define a property of the cpufreq driver and the resulting action is to auto-register, no?
Quoted 1 line
Yes.
OK, will send out another series with this change and the IS_ENABLED guards.
Thank you everyone for the review.
Rafael J. Wysocki
maintainerRe: [PATCH v4 2/9] cpufreq: Auto-register the driver as a thermal cooling device if asked
In reply to Amit KucheriaQuoted 33 lines · Amit Kucheria
All cpufreq drivers do similar things to register as a cooling device. Provide a cpufreq driver flag so drivers can just ask the cpufreq core to register the cooling device on their behalf. This allows us to get rid of duplicated code in the drivers.
In order to allow this, we add a struct
thermal_cooling_devicepointer to structcpufreq_policyso that drivers don't need to store it in a private data structure.Suggested-by Stephen Boyd <[email protected]>Suggested-by Viresh Kumar <[email protected]>Signed-off-by Amit Kucheria <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>Tested-by Matthias Kaehlcke <[email protected]>--- drivers/cpufreq/cpufreq.c | 9 +++++++++ include/linux/cpufreq.h | 9 +++++++++ 2 files changed, 18 insertions(+)drivers/cpufreq/cpufreq.c +1
-0@@ -19,6 +19,7 @@#include <linux/cpu.h> #include <linux/cpufreq.h> +#include <linux/cpu_cooling.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/init.h>
drivers/cpufreq/cpufreq.c static int cpufreq_online(unsigned int cpu) · line 1322
Quoted 4 lines
drivers/cpufreq/cpufreq.c +1
-0@@ -1318,6 +1319,9 @@ static int cpufreq_online(unsigned int cpu)if (cpufreq_driver->ready) cpufreq_driver->ready (policy); +if (cpufreq_driver->flags &CPUFREQ_AUTO_REGISTER_COOLING_DEV )
It would be good to use IS_ENABLED(CONFIG_CPU_THERMAL) here and below as a hint for the compiler.
Quoted 17 lines
drivers/cpufreq/cpufreq.c +7
-0+ policy->cdev =of_cpufreq_cooling_register (policy); +pr_debug ("initialization complete\n" );return 0 ;@@ -1405,6 +1409,11 @@ static int cpufreq_offline(unsigned int cpu) goto unlock; } +if (cpufreq_driver->flags &CPUFREQ_AUTO_REGISTER_COOLING_DEV ) { +cpufreq_cooling_unregister (policy->cdev); + policy->cdev =NULL ; + } +if (cpufreq_driver->stop_cpu) cpufreq_driver->stop_cpu (policy);
PATCH v4 3/9 cpufreq: qcom-hw: Register as a cpufreq cooling device
In reply to Amit KucheriaAdd the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow the cpufreq core to auto-register the driver as a cooling device.
--- drivers/cpufreq/qcom-cpufreq-hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/cpufreq/qcom-cpufreq-hw.c +2 -1
@@ -231,7 +231,8 @@ static struct freq_attr *qcom_cpufreq_hw_attr[] = {static struct cpufreq_driver cpufreq_qcom_hw_driver = { .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK | -CPUFREQ_HAVE_GOVERNOR_PER_POLICY , +CPUFREQ_HAVE_GOVERNOR_PER_POLICY | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = qcom_cpufreq_hw_target_index, .get = qcom_cpufreq_hw_get,
Signature · 1 line
2.17.1
Re: [PATCH v4 3/9] cpufreq: qcom-hw: Register as a cpufreq cooling device
Quoted 7 lines · Amit Kucheria
Add the
CPUFREQ_AUTO_REGISTER_COOLING_DEVflag to allow the cpufreq core to auto-register the driver as a cooling device.Signed-off-by Amit Kucheria <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>Tested-by Matthias Kaehlcke <[email protected]>Reviewed-by Stephen Boyd <[email protected]>
Quoted 19 lines
--- drivers/cpufreq/qcom-cpufreq-hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/cpufreq/qcom-cpufreq-hw.c +2
-1@@ -231,7 +231,8 @@ static struct freq_attr *qcom_cpufreq_hw_attr[] = {static struct cpufreq_driver cpufreq_qcom_hw_driver = { .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK | -CPUFREQ_HAVE_GOVERNOR_PER_POLICY , +CPUFREQ_HAVE_GOVERNOR_PER_POLICY | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = qcom_cpufreq_hw_target_index, .get = qcom_cpufreq_hw_get,
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v4 4/9 cpufreq: imx6q: Use auto-registration of thermal cooling device
In reply to Amit KucheriaUse the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.
This allows removal of boiler plate code from the driver.
--- drivers/cpufreq/imx6q-cpufreq.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-)
drivers/cpufreq/imx6q-cpufreq.c +2 -22
@@ -9,7 +9,6 @@#include <linux/clk.h> #include <linux/cpu.h> #include <linux/cpufreq.h> -#include <linux/cpu_cooling.h> #include <linux/err.h> #include <linux/module.h> #include <linux/nvmem-consumer.h>
@@ -52,7 +51,6 @@ static struct clk_bulk_data clks[] = { };static struct device *cpu_dev; -static struct thermal_cooling_device *cdev;static bool free_opp;static struct cpufreq_frequency_table *freq_table;static unsigned int max_freq;
@@ -193,16 +191,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)return 0 ; } -static void imx6q_cpufreq_ready (struct cpufreq_policy *policy) -{ - cdev =of_cpufreq_cooling_register (policy); - -if (!cdev) -dev_err (cpu_dev, -"running cpufreq without cooling device: %ld\n" , -PTR_ERR (cdev)); -} -static int imx6q_cpufreq_init (struct cpufreq_policy *policy) {int ret;
@@ -214,22 +202,14 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)return ret; } -static int imx6q_cpufreq_exit (struct cpufreq_policy *policy) -{ -cpufreq_cooling_unregister (cdev); - -return 0 ; -} -static struct cpufreq_driver imx6q_cpufreq_driver = { - .flags =CPUFREQ_NEED_INITIAL_FREQ_CHECK , + .flags =CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = imx6q_set_target, .get = cpufreq_generic_get, .init = imx6q_cpufreq_init, - .exit = imx6q_cpufreq_exit, .name ="imx6q-cpufreq" , - .ready = imx6q_cpufreq_ready, .attr = cpufreq_generic_attr, .suspend = cpufreq_generic_suspend, };
Signature · 1 line
2.17.1
Re: [PATCH v4 4/9] cpufreq: imx6q: Use auto-registration of thermal cooling device
Quoted 6 lines · Amit Kucheria
Use the
CPUFREQ_AUTO_REGISTER_COOLING_DEVflag to allow cpufreq core to automatically register as a thermal cooling device.This allows removal of boiler plate code from the driver.
Signed-off-by Amit Kucheria <[email protected]>
Quoted 67 lines
--- drivers/cpufreq/imx6q-cpufreq.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-)drivers/cpufreq/imx6q-cpufreq.c +2
-22@@ -9,7 +9,6 @@#include <linux/clk.h> #include <linux/cpu.h> #include <linux/cpufreq.h> -#include <linux/cpu_cooling.h> #include <linux/err.h> #include <linux/module.h> #include <linux/nvmem-consumer.h> @@ -52,7 +51,6 @@ static struct clk_bulk_data clks[] = { };static struct device *cpu_dev; -static struct thermal_cooling_device *cdev;static bool free_opp;static struct cpufreq_frequency_table *freq_table;static unsigned int max_freq;@@ -193,16 +191,6 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)return 0 ; } -static void imx6q_cpufreq_ready (struct cpufreq_policy *policy) -{ - cdev =of_cpufreq_cooling_register (policy); - -if (!cdev) -dev_err (cpu_dev, -"running cpufreq without cooling device: %ld\n" , -PTR_ERR (cdev)); -} -static int imx6q_cpufreq_init (struct cpufreq_policy *policy) {int ret;@@ -214,22 +202,14 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)return ret; } -static int imx6q_cpufreq_exit (struct cpufreq_policy *policy) -{ -cpufreq_cooling_unregister (cdev); - -return 0 ; -} -static struct cpufreq_driver imx6q_cpufreq_driver = { - .flags =CPUFREQ_NEED_INITIAL_FREQ_CHECK , + .flags =CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = imx6q_set_target, .get = cpufreq_generic_get, .init = imx6q_cpufreq_init, - .exit = imx6q_cpufreq_exit, .name ="imx6q-cpufreq" , - .ready = imx6q_cpufreq_ready, .attr = cpufreq_generic_attr, .suspend = cpufreq_generic_suspend, };
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v4 5/9 cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device
In reply to Amit KucheriaUse the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.
This allows removal of boiler plate code from the driver.
--- drivers/cpufreq/cpufreq-dt.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/cpufreq-dt.c +2 -12
@@ -13,7 +13,6 @@#include <linux/clk.h> #include <linux/cpu.h> -#include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> #include <linux/err.h>
@@ -30,7 +29,6 @@struct private_data {struct opp_table *opp_table;struct device *cpu_dev; -struct thermal_cooling_device *cdev;const char *reg_name;bool have_static_opps; };
@@ -301,7 +299,6 @@ static int cpufreq_exit(struct cpufreq_policy *policy) {struct private_data *priv = policy->driver_data; -cpufreq_cooling_unregister (priv->cdev);dev_pm_opp_free_cpufreq_table (priv->cpu_dev, &policy->freq_table);if (priv->have_static_opps)dev_pm_opp_of_cpumask_remove_table (policy->related_cpus);
@@ -314,21 +311,14 @@ static int cpufreq_exit(struct cpufreq_policy *policy)return 0 ; } -static void cpufreq_ready (struct cpufreq_policy *policy) -{ -struct private_data *priv = policy->driver_data; - - priv->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver dt_cpufreq_driver = { - .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK , + .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = set_target, .get = cpufreq_generic_get, .init = cpufreq_init, .exit = cpufreq_exit, - .ready = cpufreq_ready, .name ="cpufreq-dt" , .attr = cpufreq_dt_attr, .suspend = cpufreq_generic_suspend,
Signature · 1 line
2.17.1
Re: [PATCH v4 5/9] cpufreq: cpufreq-dt: Use auto-registration of thermal cooling device
Quoted 6 lines · Amit Kucheria
Use the
CPUFREQ_AUTO_REGISTER_COOLING_DEVflag to allow cpufreq core to automatically register as a thermal cooling device.This allows removal of boiler plate code from the driver.
Signed-off-by Amit Kucheria <[email protected]>
Quoted 57 lines
--- drivers/cpufreq/cpufreq-dt.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)drivers/cpufreq/cpufreq-dt.c +2
-12@@ -13,7 +13,6 @@#include <linux/clk.h> #include <linux/cpu.h> -#include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> #include <linux/err.h> @@ -30,7 +29,6 @@struct private_data {struct opp_table *opp_table;struct device *cpu_dev; -struct thermal_cooling_device *cdev;const char *reg_name;bool have_static_opps; };@@ -301,7 +299,6 @@ static int cpufreq_exit(struct cpufreq_policy *policy) {struct private_data *priv = policy->driver_data; -cpufreq_cooling_unregister (priv->cdev);dev_pm_opp_free_cpufreq_table (priv->cpu_dev, &policy->freq_table);if (priv->have_static_opps)dev_pm_opp_of_cpumask_remove_table (policy->related_cpus);@@ -314,21 +311,14 @@ static int cpufreq_exit(struct cpufreq_policy *policy)return 0 ; } -static void cpufreq_ready (struct cpufreq_policy *policy) -{ -struct private_data *priv = policy->driver_data; - - priv->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver dt_cpufreq_driver = { - .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK , + .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = set_target, .get = cpufreq_generic_get, .init = cpufreq_init, .exit = cpufreq_exit, - .ready = cpufreq_ready, .name ="cpufreq-dt" , .attr = cpufreq_dt_attr, .suspend = cpufreq_generic_suspend,
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v4 6/9 cpufreq: mediatek: Use auto-registration of thermal cooling device
In reply to Amit KucheriaUse the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.
This allows removal of boiler plate code from the driver.
--- drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/mediatek-cpufreq.c +2 -12
@@ -14,7 +14,6 @@#include <linux/clk.h> #include <linux/cpu.h> -#include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> #include <linux/module.h>
@@ -48,7 +47,6 @@ struct mtk_cpu_dvfs_info {struct regulator *sram_reg;struct clk *cpu_clk;struct clk *inter_clk; -struct thermal_cooling_device *cdev;struct list_head list_head;int intermediate_voltage;bool need_voltage_tracking;
@@ -307,13 +305,6 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,#define DYNAMIC_POWER "dynamic-power-coefficient" -static void mtk_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct mtk_cpu_dvfs_info *info = policy->driver_data; - - info->cdev =of_cpufreq_cooling_register (policy); -} -static int mtk_cpu_dvfs_info_init (struct mtk_cpu_dvfs_info *info,int cpu) {struct device *cpu_dev;
@@ -472,7 +463,6 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy) {struct mtk_cpu_dvfs_info *info = policy->driver_data; -cpufreq_cooling_unregister (info->cdev);dev_pm_opp_free_cpufreq_table (info->cpu_dev, &policy->freq_table);return 0 ;
@@ -480,13 +470,13 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)static struct cpufreq_driver mtk_cpufreq_driver = { .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK | -CPUFREQ_HAVE_GOVERNOR_PER_POLICY , +CPUFREQ_HAVE_GOVERNOR_PER_POLICY | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = mtk_cpufreq_set_target, .get = cpufreq_generic_get, .init = mtk_cpufreq_init, .exit = mtk_cpufreq_exit, - .ready = mtk_cpufreq_ready, .name ="mtk-cpufreq" , .attr = cpufreq_generic_attr, };
Signature · 1 line
2.17.1
Re: [PATCH v4 6/9] cpufreq: mediatek: Use auto-registration of thermal cooling device
Quoted 6 lines · Amit Kucheria
Use the
CPUFREQ_AUTO_REGISTER_COOLING_DEVflag to allow cpufreq core to automatically register as a thermal cooling device.This allows removal of boiler plate code from the driver.
Signed-off-by Amit Kucheria <[email protected]>
Quoted 63 lines
--- drivers/cpufreq/mediatek-cpufreq.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)drivers/cpufreq/mediatek-cpufreq.c +2
-12@@ -14,7 +14,6 @@#include <linux/clk.h> #include <linux/cpu.h> -#include <linux/cpu_cooling.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> #include <linux/module.h> @@ -48,7 +47,6 @@ struct mtk_cpu_dvfs_info {struct regulator *sram_reg;struct clk *cpu_clk;struct clk *inter_clk; -struct thermal_cooling_device *cdev;struct list_head list_head;int intermediate_voltage;bool need_voltage_tracking;@@ -307,13 +305,6 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,#define DYNAMIC_POWER "dynamic-power-coefficient" -static void mtk_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct mtk_cpu_dvfs_info *info = policy->driver_data; - - info->cdev =of_cpufreq_cooling_register (policy); -} -static int mtk_cpu_dvfs_info_init (struct mtk_cpu_dvfs_info *info,int cpu) {struct device *cpu_dev;@@ -472,7 +463,6 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy) {struct mtk_cpu_dvfs_info *info = policy->driver_data; -cpufreq_cooling_unregister (info->cdev);dev_pm_opp_free_cpufreq_table (info->cpu_dev, &policy->freq_table);return 0 ;@@ -480,13 +470,13 @@ static int mtk_cpufreq_exit(struct cpufreq_policy *policy)static struct cpufreq_driver mtk_cpufreq_driver = { .flags =CPUFREQ_STICKY |CPUFREQ_NEED_INITIAL_FREQ_CHECK | -CPUFREQ_HAVE_GOVERNOR_PER_POLICY , +CPUFREQ_HAVE_GOVERNOR_PER_POLICY | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .target_index = mtk_cpufreq_set_target, .get = cpufreq_generic_get, .init = mtk_cpufreq_init, .exit = mtk_cpufreq_exit, - .ready = mtk_cpufreq_ready, .name ="mtk-cpufreq" , .attr = cpufreq_generic_attr, };
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v4 7/9 cpufreq: qoriq: Use auto-registration of thermal cooling device
In reply to Amit KucheriaUse the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.
This allows removal of boiler plate code from the driver.
--- drivers/cpufreq/qoriq-cpufreq.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)
drivers/cpufreq/qoriq-cpufreq.c +2 -13
@@ -13,7 +13,6 @@#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/cpufreq.h> -#include <linux/cpu_cooling.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/kernel.h>
@@ -31,7 +30,6 @@struct cpu_data {struct clk **pclk;struct cpufreq_frequency_table *table; -struct thermal_cooling_device *cdev; };/*
@@ -239,7 +237,6 @@ static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy) {struct cpu_data *data = policy->driver_data; -cpufreq_cooling_unregister (data->cdev);kfree (data->pclk);kfree (data->table);kfree (data);
@@ -258,23 +255,15 @@ static int qoriq_cpufreq_target(struct cpufreq_policy *policy,return clk_set_parent (policy->clk, parent); } - -static void qoriq_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct cpu_data *cpud = policy->driver_data; - - cpud->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver qoriq_cpufreq_driver = { .name ="qoriq_cpufreq" , - .flags =CPUFREQ_CONST_LOOPS , + .flags =CPUFREQ_CONST_LOOPS | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .init = qoriq_cpufreq_cpu_init, .exit = qoriq_cpufreq_cpu_exit, .verify = cpufreq_generic_frequency_table_verify, .target_index = qoriq_cpufreq_target, .get = cpufreq_generic_get, - .ready = qoriq_cpufreq_ready, .attr = cpufreq_generic_attr, };
Signature · 1 line
2.17.1
Re: [PATCH v4 7/9] cpufreq: qoriq: Use auto-registration of thermal cooling device
Quoted 6 lines · Amit Kucheria
Use the
CPUFREQ_AUTO_REGISTER_COOLING_DEVflag to allow cpufreq core to automatically register as a thermal cooling device.This allows removal of boiler plate code from the driver.
Signed-off-by Amit Kucheria <[email protected]>
Quoted 59 lines
--- drivers/cpufreq/qoriq-cpufreq.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)drivers/cpufreq/qoriq-cpufreq.c +2
-13@@ -13,7 +13,6 @@#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/cpufreq.h> -#include <linux/cpu_cooling.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/kernel.h> @@ -31,7 +30,6 @@struct cpu_data {struct clk **pclk;struct cpufreq_frequency_table *table; -struct thermal_cooling_device *cdev; };/* @@ -239,7 +237,6 @@ static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy) {struct cpu_data *data = policy->driver_data; -cpufreq_cooling_unregister (data->cdev);kfree (data->pclk);kfree (data->table);kfree (data);@@ -258,23 +255,15 @@ static int qoriq_cpufreq_target(struct cpufreq_policy *policy,return clk_set_parent (policy->clk, parent); } - -static void qoriq_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct cpu_data *cpud = policy->driver_data; - - cpud->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver qoriq_cpufreq_driver = { .name ="qoriq_cpufreq" , - .flags =CPUFREQ_CONST_LOOPS , + .flags =CPUFREQ_CONST_LOOPS | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .init = qoriq_cpufreq_cpu_init, .exit = qoriq_cpufreq_cpu_exit, .verify = cpufreq_generic_frequency_table_verify, .target_index = qoriq_cpufreq_target, .get = cpufreq_generic_get, - .ready = qoriq_cpufreq_ready, .attr = cpufreq_generic_attr, };
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v4 8/9 cpufreq: scmi: Use auto-registration of thermal cooling device
In reply to Amit KucheriaUse the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.
This allows removal of boiler plate code from the driver.
--- drivers/cpufreq/scmi-cpufreq.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/scmi-cpufreq.c +2 -12
@@ -11,7 +11,6 @@#include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> -#include <linux/cpu_cooling.h> #include <linux/export.h> #include <linux/module.h> #include <linux/pm_opp.h>
@@ -22,7 +21,6 @@struct scmi_data {int domain_id;struct device *cpu_dev; -struct thermal_cooling_device *cdev; };static const struct scmi_handle *handle;
@@ -185,7 +183,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy) {struct scmi_data *priv = policy->driver_data; -cpufreq_cooling_unregister (priv->cdev);dev_pm_opp_free_cpufreq_table (priv->cpu_dev, &policy->freq_table);kfree (priv);dev_pm_opp_remove_all_dynamic (priv->cpu_dev);
@@ -193,17 +190,11 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)return 0 ; } -static void scmi_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct scmi_data *priv = policy->driver_data; - - priv->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver scmi_cpufreq_driver = { .name ="scmi" , .flags =CPUFREQ_STICKY |CPUFREQ_HAVE_GOVERNOR_PER_POLICY | -CPUFREQ_NEED_INITIAL_FREQ_CHECK , +CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .attr = cpufreq_generic_attr, .target_index = scmi_cpufreq_set_target,
@@ -211,7 +202,6 @@ static struct cpufreq_driver scmi_cpufreq_driver = { .get = scmi_cpufreq_get_rate, .init = scmi_cpufreq_init, .exit = scmi_cpufreq_exit, - .ready = scmi_cpufreq_ready, };static int scmi_cpufreq_probe (struct scmi_device *sdev)
Signature · 1 line
2.17.1
Re: [PATCH v4 8/9] cpufreq: scmi: Use auto-registration of thermal cooling device
Quoted 7 lines · Amit Kucheria
Use the
CPUFREQ_AUTO_REGISTER_COOLING_DEVflag to allow cpufreq core to automatically register as a thermal cooling device.This allows removal of boiler plate code from the driver.
Signed-off-by Amit Kucheria <[email protected]>Acked-by Sudeep Holla <[email protected]>
Quoted 61 lines
--- drivers/cpufreq/scmi-cpufreq.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)drivers/cpufreq/scmi-cpufreq.c +2
-12@@ -11,7 +11,6 @@#include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> -#include <linux/cpu_cooling.h> #include <linux/export.h> #include <linux/module.h> #include <linux/pm_opp.h> @@ -22,7 +21,6 @@struct scmi_data {int domain_id;struct device *cpu_dev; -struct thermal_cooling_device *cdev; };static const struct scmi_handle *handle;@@ -185,7 +183,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy) {struct scmi_data *priv = policy->driver_data; -cpufreq_cooling_unregister (priv->cdev);dev_pm_opp_free_cpufreq_table (priv->cpu_dev, &policy->freq_table);kfree (priv);dev_pm_opp_remove_all_dynamic (priv->cpu_dev);@@ -193,17 +190,11 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)return 0 ; } -static void scmi_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct scmi_data *priv = policy->driver_data; - - priv->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver scmi_cpufreq_driver = { .name ="scmi" , .flags =CPUFREQ_STICKY |CPUFREQ_HAVE_GOVERNOR_PER_POLICY | -CPUFREQ_NEED_INITIAL_FREQ_CHECK , +CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .attr = cpufreq_generic_attr, .target_index = scmi_cpufreq_set_target,@@ -211,7 +202,6 @@ static struct cpufreq_driver scmi_cpufreq_driver = { .get = scmi_cpufreq_get_rate, .init = scmi_cpufreq_init, .exit = scmi_cpufreq_exit, - .ready = scmi_cpufreq_ready, };static int scmi_cpufreq_probe (struct scmi_device *sdev)
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v4 9/9 cpufreq: scpi: Use auto-registration of thermal cooling device
In reply to Amit KucheriaUse the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to automatically register as a thermal cooling device.
This allows removal of boiler plate code from the driver.
--- drivers/cpufreq/scpi-cpufreq.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)
drivers/cpufreq/scpi-cpufreq.c +2 -12
@@ -22,7 +22,6 @@#include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> -#include <linux/cpu_cooling.h> #include <linux/export.h> #include <linux/module.h> #include <linux/of_platform.h>
@@ -34,7 +33,6 @@struct scpi_data {struct clk *clk;struct device *cpu_dev; -struct thermal_cooling_device *cdev; };static struct scpi_ops *scpi_ops;
@@ -186,7 +184,6 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy) {struct scpi_data *priv = policy->driver_data; -cpufreq_cooling_unregister (priv->cdev);clk_put (priv->clk);dev_pm_opp_free_cpufreq_table (priv->cpu_dev, &policy->freq_table);kfree (priv);
@@ -195,23 +192,16 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)return 0 ; } -static void scpi_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct scpi_data *priv = policy->driver_data; - - priv->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver scpi_cpufreq_driver = { .name ="scpi-cpufreq" , .flags =CPUFREQ_STICKY |CPUFREQ_HAVE_GOVERNOR_PER_POLICY | -CPUFREQ_NEED_INITIAL_FREQ_CHECK , +CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .attr = cpufreq_generic_attr, .get = scpi_cpufreq_get_rate, .init = scpi_cpufreq_init, .exit = scpi_cpufreq_exit, - .ready = scpi_cpufreq_ready, .target_index = scpi_cpufreq_set_target, };
Signature · 1 line
2.17.1
Re: [PATCH v4 9/9] cpufreq: scpi: Use auto-registration of thermal cooling device
Quoted 7 lines · Amit Kucheria
Use the
CPUFREQ_AUTO_REGISTER_COOLING_DEVflag to allow cpufreq core to automatically register as a thermal cooling device.This allows removal of boiler plate code from the driver.
Signed-off-by Amit Kucheria <[email protected]>Acked-by Sudeep Holla <[email protected]>
Quoted 59 lines
--- drivers/cpufreq/scpi-cpufreq.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-)drivers/cpufreq/scpi-cpufreq.c +2
-12@@ -22,7 +22,6 @@#include <linux/cpu.h> #include <linux/cpufreq.h> #include <linux/cpumask.h> -#include <linux/cpu_cooling.h> #include <linux/export.h> #include <linux/module.h> #include <linux/of_platform.h> @@ -34,7 +33,6 @@struct scpi_data {struct clk *clk;struct device *cpu_dev; -struct thermal_cooling_device *cdev; };static struct scpi_ops *scpi_ops;@@ -186,7 +184,6 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy) {struct scpi_data *priv = policy->driver_data; -cpufreq_cooling_unregister (priv->cdev);clk_put (priv->clk);dev_pm_opp_free_cpufreq_table (priv->cpu_dev, &policy->freq_table);kfree (priv);@@ -195,23 +192,16 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)return 0 ; } -static void scpi_cpufreq_ready (struct cpufreq_policy *policy) -{ -struct scpi_data *priv = policy->driver_data; - - priv->cdev =of_cpufreq_cooling_register (policy); -} -static struct cpufreq_driver scpi_cpufreq_driver = { .name ="scpi-cpufreq" , .flags =CPUFREQ_STICKY |CPUFREQ_HAVE_GOVERNOR_PER_POLICY | -CPUFREQ_NEED_INITIAL_FREQ_CHECK , +CPUFREQ_NEED_INITIAL_FREQ_CHECK | +CPUFREQ_AUTO_REGISTER_COOLING_DEV , .verify = cpufreq_generic_frequency_table_verify, .attr = cpufreq_generic_attr, .get = scpi_cpufreq_get_rate, .init = scpi_cpufreq_init, .exit = scpi_cpufreq_exit, - .ready = scpi_cpufreq_ready, .target_index = scpi_cpufreq_set_target, };
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 7 lines · Amit Kucheria
Add a flag for cpufreq drivers to tell cpufreq core to auto-register themselves as a thermal cooling device.
There series converts over all the drivers except
arm_big_little.c. Tested on SDM845 with the qcom-cpufreq-hw driver. Only compile-tested the others.
Quoted 7 lines
Things needing fixing (but not a blocker for the series):
- Look at how to detect that we're not in IKS mode in arm_big_little's .ready callback.Chnages since v3:
- Got rid of wrapper function to register/unregister cooling devices. Directly call the function incpufreq.c
Signature · 1 line
viresh