Skip to contentSkip to conversation

Add support for the IGEP v2 board.

PATCH Superseded Enric Balletbo i Serra 3 participants 7 messages Oct 9, 2010 – Oct 10, 2010

Subsystems (4)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover Add support for the IGEP v2 board.

Hello,

This is the first version of patch series to add initial support for OMAP3 IGEP v2 board. Please consider to include in next merge window.

Cheers,
Enric

#1 lore raw

PATCH 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx

This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers.

---
 drivers/mtd/onenand/onenand_base.c |    1 +
 include/linux/mtd/onenand.h        |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)
drivers/mtd/onenand/onenand_base.c +1 -0
index f9273ab..c978420 100644
@@ -2214,6 +2214,7 @@ char *onenand_print_device_info(int device, int version)
 
 static const struct onenand_manufacturers onenand_manuf_ids[] = {
 	{ONENAND_MFR_SAMSUNG, "Samsung"},
+	{ONENAND_MFR_NUMONYX, "Numonyx"},
 };
 
 /**
include/linux/mtd/onenand.h +1 -0
index 68e174e..0025fd0 100644
@@ -155,6 +155,7 @@ struct onenand_chip {
  * OneNAND Flash Manufacturer ID Codes
  */
 #define ONENAND_MFR_SAMSUNG	0xec
+#define ONENAND_MFR_NUMONYX	0x20
 
 /**
  * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx

Quoted 31 lines · Enric Balletbo i Serra

This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers.

---
?drivers/mtd/onenand/onenand_base.c | ? ?1 +
?include/linux/mtd/onenand.h ? ? ? ?| ? ?1 +
?2 files changed, 2 insertions(+), 0 deletions(-)

drivers/mtd/onenand/onenand_base.c +1 -0
index f9273ab..c978420 100644
@@ -2214,6 +2214,7 @@ char *onenand_print_device_info(int device, int version)
 
 ?static const struct onenand_manufacturers onenand_manuf_ids[] = {
 ? ? ? ?{ONENAND_MFR_SAMSUNG, "Samsung"},
+ ? ? ? {ONENAND_MFR_NUMONYX, "Numonyx"},
 ?};
 

?/**

include/linux/mtd/onenand.h +0 -0
index 68e174e..0025fd0 100644
@@ -155,6 +155,7 @@ struct onenand_chip {

?* OneNAND Flash Manufacturer ID Codes
?*/
?#define ONENAND_MFR_SAMSUNG ? ?0xec
+#define ONENAND_MFR_NUMONYX ? ?0x20

Quoted 4 lines

?/**
?* struct nand_manufacturers - NAND Flash Manufacturer ID Structure --
1.7.0.4

#3 lore raw

PATCH 2/3 OMAP3: SDRC: Introduce Numonyx DDR type

In reply to Enric Balletbo i Serra

Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings.

---
 arch/arm/include/asm/arch-omap3/mem.h |   42 +++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-omap3/mem.h +42 -0
index a78cf9f..cb59588 100644
@@ -128,6 +128,44 @@ enum {
 		(MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) |	\
 		(MICRON_TWTR_165 << 16))
 
+/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
+ *   ACTIMA
+ *      TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
+ *      TDPL (Twr) = 15/6 = 2.5 -> 3
+ *      TRRD = 12/6 = 2
+ *      TRCD = 22.5/6 = 3.75 -> 4
+ *      TRP  = 18/6 = 3
+ *      TRAS = 42/6 = 7
+ *      TRC  = 60/6 = 10
+ *      TRFC = 140/6 = 23.3 -> 24
+ *   ACTIMB
+ *	TWTR = 2
+ *	TCKE = 2
+ *	TXSR = 200/6 =  33.3 -> 34
+ *	TXP  = 1.0 + 1.1 = 2.1 -> 3
+ */
+#define NUMONYX_TDAL_165   6
+#define NUMONYX_TDPL_165   3
+#define NUMONYX_TRRD_165   2
+#define NUMONYX_TRCD_165   4
+#define NUMONYX_TRP_165    3
+#define NUMONYX_TRAS_165   7
+#define NUMONYX_TRC_165   10
+#define NUMONYX_TRFC_165  24
+#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \
+		(NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \
+		(NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \
+		(NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \
+		(NUMONYX_TDAL_165))
+
+#define NUMONYX_TWTR_165   2
+#define NUMONYX_TCKE_165   2
+#define NUMONYX_TXP_165    3
+#define NUMONYX_XSR_165    34
+#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \
+		(NUMONYX_XSR_165 << 0)) | (NUMONYX_TXP_165 << 8) | \
+		(NUMONYX_TWTR_165 << 16)
+
 #ifdef CONFIG_OMAP3_INFINEON_DDR
 #define V_ACTIMA_165 INFINEON_V_ACTIMA_165
 #define V_ACTIMB_165 INFINEON_V_ACTIMB_165
@@ -136,6 +174,10 @@ enum {
 #define V_ACTIMA_165 MICRON_V_ACTIMA_165
 #define V_ACTIMB_165 MICRON_V_ACTIMB_165
 #endif
+#ifdef CONFIG_OMAP3_NUMONYX_DDR
+#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
+#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
+#endif
 
 #if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165)
 #error "Please choose the right DDR type in config header"
Signature · 1 line
1.7.0.4
#4 lore raw

PATCH 2/3 OMAP3: SDRC: Introduce Numonyx DDR type

Quoted 43 lines · Enric Balletbo i Serra

Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings.

---
 arch/arm/include/asm/arch-omap3/mem.h |   42 +++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-omap3/mem.h +27 -0
index a78cf9f..cb59588 100644
@@ -128,6 +128,44 @@ enum {
 		(MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) |	\
 		(MICRON_TWTR_165 << 16))
 
+/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
+ *   ACTIMA
+ *      TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
+ *      TDPL (Twr) = 15/6 = 2.5 -> 3
+ *      TRRD = 12/6 = 2
+ *      TRCD = 22.5/6 = 3.75 -> 4
+ *      TRP  = 18/6 = 3
+ *      TRAS = 42/6 = 7
+ *      TRC  = 60/6 = 10
+ *      TRFC = 140/6 = 23.3 -> 24
+ *   ACTIMB
+ *	TWTR = 2
+ *	TCKE = 2
+ *	TXSR = 200/6 =  33.3 -> 34
+ *	TXP  = 1.0 + 1.1 = 2.1 -> 3
+ */
+#define NUMONYX_TDAL_165   6
+#define NUMONYX_TDPL_165   3
+#define NUMONYX_TRRD_165   2
+#define NUMONYX_TRCD_165   4
+#define NUMONYX_TRP_165    3
+#define NUMONYX_TRAS_165   7
+#define NUMONYX_TRC_165   10
+#define NUMONYX_TRFC_165  24
+#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \
+		(NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \
+		(NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \

arch/arm/include/asm/arch-omap3/mem.h enum { · line 167

Quoted 10 lines
arch/arm/include/asm/arch-omap3/mem.h +10 -0
+		(NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \
+		(NUMONYX_TDAL_165))
+
+#define NUMONYX_TWTR_165   2
+#define NUMONYX_TCKE_165   2
+#define NUMONYX_TXP_165    3
+#define NUMONYX_XSR_165    34
+#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \
+		(NUMONYX_XSR_165 << 0)) | (NUMONYX_TXP_165 << 8) | \
+		(NUMONYX_TWTR_165 << 16)

I think the parens in the above define aren't quite what you intended (perhaps an extra close paren in the XSR term and a missing close paren on the end of the define)

Quoted 4 lines
arch/arm/include/asm/arch-omap3/mem.h +0 -0
 #ifdef CONFIG_OMAP3_INFINEON_DDR
 #define V_ACTIMA_165 INFINEON_V_ACTIMA_165
 #define V_ACTIMB_165 INFINEON_V_ACTIMB_165

arch/arm/include/asm/arch-omap3/mem.h enum { · line 183

Quoted 10 lines
arch/arm/include/asm/arch-omap3/mem.h +4 -0
@@ -136,6 +174,10 @@ enum {
 #define V_ACTIMA_165 MICRON_V_ACTIMA_165
 #define V_ACTIMB_165 MICRON_V_ACTIMB_165
 #endif
+#ifdef CONFIG_OMAP3_NUMONYX_DDR
+#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
+#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
+#endif
 
 #if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165)
 #error "Please choose the right DDR type in config header"

If the above change is made, then:

Steve

#5 lore raw

PATCH 3/3 OMAP3: Add support for the IGEP v2 board.

In reply to Enric Balletbo i Serra

The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.

---
 MAKEALL                        |    1 +
 board/isee/igep0020/Makefile   |   49 +++++++++
 board/isee/igep0020/config.mk  |   34 ++++++
 board/isee/igep0020/igep0020.c |  129 ++++++++++++++++++++++
 board/isee/igep0020/igep0020.h |  156 +++++++++++++++++++++++++++
 boards.cfg                     |    1 +
 include/configs/igep0020.h     |  230 ++++++++++++++++++++++++++++++++++++++++
 7 files changed, 600 insertions(+), 0 deletions(-)
 create mode 100644 board/isee/igep0020/Makefile
 create mode 100644 board/isee/igep0020/config.mk
 create mode 100644 board/isee/igep0020/igep0020.c
 create mode 100644 board/isee/igep0020/igep0020.h
 create mode 100644 include/configs/igep0020.h
MAKEALL +1 -0
index 1b506d6..78dce8b 100755
@@ -490,6 +490,7 @@ LIST_ARM11="			\
 LIST_ARMV7="		\
 	am3517_evm		\
 	devkit8000		\
+	igep0020		\
 	mx51evk			\
 	omap3_beagle		\
 	omap3_overo		\
board/isee/igep0020/Makefile new file +49 -0

49 lines not on this page · raw message

board/isee/igep0020/config.mk new file +34 -0
new file mode 100644
index 0000000..3ae6a40
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2009
+# ISEE 2007 SL, <www.iseebcn.com>
+#
+# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80008000
+
board/isee/igep0020/igep0020.c new file +129 -0

129 lines not on this page · raw message

board/isee/igep0020/igep0020.h new file +156 -0

156 lines not on this page · raw message

boards.cfg +1 -0
index 202de1a..6f8db44 100644
@@ -262,6 +262,7 @@ omap4_panda	arm	armv7		panda		ti		omap4
 omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
 am3517_evm	arm	armv7		am3517evm	logicpd		omap3
 devkit8000	arm	armv7		devkit8000	timll		omap3
+igep0020	arm	armv7		igep0020	isee		omap3
 s5p_goni	arm	armv7		goni		samsung		s5pc1xx
 smdkc100	arm	armv7		smdkc100	samsung		s5pc1xx
 ixdpg425	arm	ixp
include/configs/igep0020.h new file +230 -0

230 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#6 lore raw

PATCH 3/3 OMAP3: Add support for the IGEP v2 board.

Quoted 198 lines · Enric Balletbo i Serra

The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.

---
 MAKEALL                        |    1 +
 board/isee/igep0020/Makefile   |   49 +++++++++
 board/isee/igep0020/config.mk  |   34 ++++++
 board/isee/igep0020/igep0020.c |  129 ++++++++++++++++++++++
 board/isee/igep0020/igep0020.h |  156 +++++++++++++++++++++++++++
 boards.cfg                     |    1 +
 include/configs/igep0020.h     |  230 ++++++++++++++++++++++++++++++++++++++++
 7 files changed, 600 insertions(+), 0 deletions(-)
 create mode 100644 board/isee/igep0020/Makefile
 create mode 100644 board/isee/igep0020/config.mk
 create mode 100644 board/isee/igep0020/igep0020.c
 create mode 100644 board/isee/igep0020/igep0020.h
 create mode 100644 include/configs/igep0020.h
MAKEALL +1 -0
index 1b506d6..78dce8b 100755
@@ -490,6 +490,7 @@ LIST_ARM11="			\
 LIST_ARMV7="		\
 	am3517_evm		\
 	devkit8000		\
+	igep0020		\
 	mx51evk			\
 	omap3_beagle		\
 	omap3_overo		\
board/isee/igep0020/Makefile new file +49 -0
new file mode 100644
index 0000000..2f11879
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= igep0020.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/isee/igep0020/config.mk new file +34 -0
new file mode 100644
index 0000000..3ae6a40
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2009
+# ISEE 2007 SL, <www.iseebcn.com>
+#
+# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80008000
+
board/isee/igep0020/igep0020.c new file +64 -0
new file mode 100644
index 0000000..f5b51e9
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "igep0020.h"
+
+/* GPMC definitions for LAN9221 chips */
+static const u32 gpmc_lan_config[] = {
+    NET_LAN9221_GPMC_CONFIG1,
+    NET_LAN9221_GPMC_CONFIG2,
+    NET_LAN9221_GPMC_CONFIG3,
+    NET_LAN9221_GPMC_CONFIG4,
+    NET_LAN9221_GPMC_CONFIG5,
+    NET_LAN9221_GPMC_CONFIG6,
+};
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* board id for Linux */
+	gd->bd->bi_arch_number = MACH_TYPE_IGEP0020;
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+/*
+ * Routine: setup_net_chip
+ * Description: Setting up the configuration GPMC registers specific to the
+ *		Ethernet hardware.
+ */

board/isee/igep0020/igep0020.c line 74

Quoted 10 lines
board/isee/igep0020/igep0020.c new file +10 -0
+#if defined(CONFIG_CMD_NET)
+static void setup_net_chip(void)
+{
+	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+	enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
+			GPMC_SIZE_16M);
+
+	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+	writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);

Extra space after first &ctrl_base in line above.

Quoted 300 lines
board/isee/igep0020/igep0020.c new file +55 -0
+	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+		&ctrl_base->gpmc_nadv_ale);
+
+	/* Make GPIO 64 as output pin and send a magic pulse through it */
+	if (!omap_request_gpio(64)) {
+		omap_set_gpio_direction(64, 0);
+		omap_set_gpio_dataout(64, 1);
+		udelay(1);
+		omap_set_gpio_dataout(64, 0);
+		udelay(1);
+		omap_set_gpio_dataout(64, 1);
+	}
+}
+#endif
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+	twl4030_power_init();
+
+#if defined(CONFIG_CMD_NET)
+	setup_net_chip();
+#endif
+
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_DEFAULT();
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}
+
board/isee/igep0020/igep0020.h new file +156 -0
new file mode 100644
index 0000000..c08d758
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _IGEP0020_H_
+#define _IGEP0020_H_
+
+const omap3_sysinfo sysinfo = {
+	DDR_STACKED,
+	"IGEP v2 board",
+	"ONENAND",
+};
+
+/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1    0x00001000
+#define NET_LAN9221_GPMC_CONFIG2    0x00080701
+#define NET_LAN9221_GPMC_CONFIG3    0x00020201
+#define NET_LAN9221_GPMC_CONFIG4    0x08030703
+#define NET_LAN9221_GPMC_CONFIG5    0x00060908
+#define NET_LAN9221_GPMC_CONFIG6    0x87030000
+#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
+
+static void setup_net_chip(void);
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_DEFAULT()\
+	MUX_VAL(CP(SDRC_D0),        (IEN  | PTD | DIS | M0)) /* SDRC_D0 */\
+	MUX_VAL(CP(SDRC_D1),        (IEN  | PTD | DIS | M0)) /* SDRC_D1 */\
+	MUX_VAL(CP(SDRC_D2),        (IEN  | PTD | DIS | M0)) /* SDRC_D2 */\
+	MUX_VAL(CP(SDRC_D3),        (IEN  | PTD | DIS | M0)) /* SDRC_D3 */\
+	MUX_VAL(CP(SDRC_D4),        (IEN  | PTD | DIS | M0)) /* SDRC_D4 */\
+	MUX_VAL(CP(SDRC_D5),        (IEN  | PTD | DIS | M0)) /* SDRC_D5 */\
+	MUX_VAL(CP(SDRC_D6),        (IEN  | PTD | DIS | M0)) /* SDRC_D6 */\
+	MUX_VAL(CP(SDRC_D7),        (IEN  | PTD | DIS | M0)) /* SDRC_D7 */\
+	MUX_VAL(CP(SDRC_D8),        (IEN  | PTD | DIS | M0)) /* SDRC_D8 */\
+	MUX_VAL(CP(SDRC_D9),        (IEN  | PTD | DIS | M0)) /* SDRC_D9 */\
+	MUX_VAL(CP(SDRC_D10),       (IEN  | PTD | DIS | M0)) /* SDRC_D10 */\
+	MUX_VAL(CP(SDRC_D11),       (IEN  | PTD | DIS | M0)) /* SDRC_D11 */\
+	MUX_VAL(CP(SDRC_D12),       (IEN  | PTD | DIS | M0)) /* SDRC_D12 */\
+	MUX_VAL(CP(SDRC_D13),       (IEN  | PTD | DIS | M0)) /* SDRC_D13 */\
+	MUX_VAL(CP(SDRC_D14),       (IEN  | PTD | DIS | M0)) /* SDRC_D14 */\
+	MUX_VAL(CP(SDRC_D15),       (IEN  | PTD | DIS | M0)) /* SDRC_D15 */\
+	MUX_VAL(CP(SDRC_D16),       (IEN  | PTD | DIS | M0)) /* SDRC_D16 */\
+	MUX_VAL(CP(SDRC_D17),       (IEN  | PTD | DIS | M0)) /* SDRC_D17 */\
+	MUX_VAL(CP(SDRC_D18),       (IEN  | PTD | DIS | M0)) /* SDRC_D18 */\
+	MUX_VAL(CP(SDRC_D19),       (IEN  | PTD | DIS | M0)) /* SDRC_D19 */\
+	MUX_VAL(CP(SDRC_D20),       (IEN  | PTD | DIS | M0)) /* SDRC_D20 */\
+	MUX_VAL(CP(SDRC_D21),       (IEN  | PTD | DIS | M0)) /* SDRC_D21 */\
+	MUX_VAL(CP(SDRC_D22),       (IEN  | PTD | DIS | M0)) /* SDRC_D22 */\
+	MUX_VAL(CP(SDRC_D23),       (IEN  | PTD | DIS | M0)) /* SDRC_D23 */\
+	MUX_VAL(CP(SDRC_D24),       (IEN  | PTD | DIS | M0)) /* SDRC_D24 */\
+	MUX_VAL(CP(SDRC_D25),       (IEN  | PTD | DIS | M0)) /* SDRC_D25 */\
+	MUX_VAL(CP(SDRC_D26),       (IEN  | PTD | DIS | M0)) /* SDRC_D26 */\
+	MUX_VAL(CP(SDRC_D27),       (IEN  | PTD | DIS | M0)) /* SDRC_D27 */\
+	MUX_VAL(CP(SDRC_D28),       (IEN  | PTD | DIS | M0)) /* SDRC_D28 */\
+	MUX_VAL(CP(SDRC_D29),       (IEN  | PTD | DIS | M0)) /* SDRC_D29 */\
+	MUX_VAL(CP(SDRC_D30),       (IEN  | PTD | DIS | M0)) /* SDRC_D30 */\
+	MUX_VAL(CP(SDRC_D31),       (IEN  | PTD | DIS | M0)) /* SDRC_D31 */\
+	MUX_VAL(CP(SDRC_CLK),       (IEN  | PTD | DIS | M0)) /* SDRC_CLK */\
+	MUX_VAL(CP(SDRC_DQS0),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS0 */\
+	MUX_VAL(CP(SDRC_DQS1),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS1 */\
+	MUX_VAL(CP(SDRC_DQS2),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS2 */\
+	MUX_VAL(CP(SDRC_DQS3),      (IEN  | PTD | DIS | M0)) /* SDRC_DQS3 */\
+	MUX_VAL(CP(GPMC_A1),        (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\
+	MUX_VAL(CP(GPMC_A2),        (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\
+	MUX_VAL(CP(GPMC_A3),        (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\
+	MUX_VAL(CP(GPMC_A4),        (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\
+	MUX_VAL(CP(GPMC_A5),        (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\
+	MUX_VAL(CP(GPMC_A6),        (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\
+	MUX_VAL(CP(GPMC_A7),        (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\
+	MUX_VAL(CP(GPMC_A8),        (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\
+	MUX_VAL(CP(GPMC_A9),        (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\
+	MUX_VAL(CP(GPMC_A10),       (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\
+	MUX_VAL(CP(GPMC_D0),        (IEN  | PTD | DIS | M0)) /* GPMC_D0 */\
+	MUX_VAL(CP(GPMC_D1),        (IEN  | PTD | DIS | M0)) /* GPMC_D1 */\
+	MUX_VAL(CP(GPMC_D2),        (IEN  | PTD | DIS | M0)) /* GPMC_D2 */\
+	MUX_VAL(CP(GPMC_D3),        (IEN  | PTD | DIS | M0)) /* GPMC_D3 */\
+	MUX_VAL(CP(GPMC_D4),        (IEN  | PTD | DIS | M0)) /* GPMC_D4 */\
+	MUX_VAL(CP(GPMC_D5),        (IEN  | PTD | DIS | M0)) /* GPMC_D5 */\
+	MUX_VAL(CP(GPMC_D6),        (IEN  | PTD | DIS | M0)) /* GPMC_D6 */\
+	MUX_VAL(CP(GPMC_D7),        (IEN  | PTD | DIS | M0)) /* GPMC_D7 */\
+	MUX_VAL(CP(GPMC_D8),        (IEN  | PTD | DIS | M0)) /* GPMC_D8 */\
+	MUX_VAL(CP(GPMC_D9),        (IEN  | PTD | DIS | M0)) /* GPMC_D9 */\
+	MUX_VAL(CP(GPMC_D10),       (IEN  | PTD | DIS | M0)) /* GPMC_D10 */\
+	MUX_VAL(CP(GPMC_D11),       (IEN  | PTD | DIS | M0)) /* GPMC_D11 */\
+	MUX_VAL(CP(GPMC_D12),       (IEN  | PTD | DIS | M0)) /* GPMC_D12 */\
+	MUX_VAL(CP(GPMC_D13),       (IEN  | PTD | DIS | M0)) /* GPMC_D13 */\
+	MUX_VAL(CP(GPMC_D14),       (IEN  | PTD | DIS | M0)) /* GPMC_D14 */\
+	MUX_VAL(CP(GPMC_D15),       (IEN  | PTD | DIS | M0)) /* GPMC_D15 */\
+	MUX_VAL(CP(GPMC_NCS0),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS0 */\
+	MUX_VAL(CP(GPMC_NCS1),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS1 */\
+	MUX_VAL(CP(GPMC_NCS2),      (IDIS | PTU | EN  | M0)) /* GPIO_nCS2 */\
+	MUX_VAL(CP(GPMC_NCS3),      (IDIS | PTU | EN  | M0)) /* GPIO_nCS3 */\
+	MUX_VAL(CP(GPMC_NCS4),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS4 */\
+	MUX_VAL(CP(GPMC_NCS5),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS5 */\
+	MUX_VAL(CP(GPMC_NCS6),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS6 */\
+	MUX_VAL(CP(GPMC_NCS7),      (IDIS | PTU | EN  | M0)) /* GPMC_nCS7 */\
+	MUX_VAL(CP(GPMC_CLK),       (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\
+	MUX_VAL(CP(GPMC_NADV_ALE),  (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\
+	MUX_VAL(CP(GPMC_NOE),       (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\
+	MUX_VAL(CP(GPMC_NWE),       (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\
+	MUX_VAL(CP(GPMC_NBE0_CLE),  (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\
+	MUX_VAL(CP(GPMC_NBE1),      (IEN  | PTD | DIS | M0)) /* GPMC_nBE1 */\
+	MUX_VAL(CP(GPMC_NWP),       (IEN  | PTD | DIS | M0)) /* GPMC_nWP */\
+	MUX_VAL(CP(GPMC_WAIT0),     (IEN  | PTU | EN  | M0)) /* GPMC_WAIT0 */\
+	MUX_VAL(CP(GPMC_WAIT2),     (IEN  | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\
+	MUX_VAL(CP(MMC1_CLK),       (IDIS | PTU | EN  | M0)) /* MMC1_CLK */\
+	MUX_VAL(CP(MMC1_CMD),       (IEN  | PTU | EN  | M0)) /* MMC1_CMD */\
+	MUX_VAL(CP(MMC1_DAT0),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT0 */\
+	MUX_VAL(CP(MMC1_DAT1),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT1 */\
+	MUX_VAL(CP(MMC1_DAT2),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT2 */\
+	MUX_VAL(CP(MMC1_DAT3),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT3 */\
+	MUX_VAL(CP(UART3_TX_IRTX),  (IDIS | PTD | DIS | M0)) /* UART3_TX */\
+	MUX_VAL(CP(UART3_RX_IRRX),  (IEN  | PTD | DIS | M0)) /* UART3_RX */\
+	MUX_VAL(CP(I2C1_SCL),       (IEN  | PTU | EN  | M0)) /* I2C1_SCL */\
+	MUX_VAL(CP(I2C1_SDA),       (IEN  | PTU | EN  | M0)) /* I2C1_SDA */\
+	MUX_VAL(CP(I2C4_SCL),       (IEN  | PTU | EN  | M0)) /* I2C4_SCL */\
+	MUX_VAL(CP(I2C4_SDA),       (IEN  | PTU | EN  | M0)) /* I2C4_SDA */\
+	MUX_VAL(CP(SYS_32K),        (IEN  | PTD | DIS | M0)) /* SYS_32K */\
+	MUX_VAL(CP(SYS_BOOT0),      (IEN  | PTD | DIS | M4)) /* GPIO_2 */\
+	MUX_VAL(CP(SYS_BOOT1),      (IEN  | PTD | DIS | M4)) /* GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),      (IEN  | PTD | DIS | M4)) /* GPIO_4 */\
+	MUX_VAL(CP(SYS_BOOT3),      (IEN  | PTD | DIS | M4)) /* GPIO_5 */\
+	MUX_VAL(CP(SYS_BOOT4),      (IEN  | PTD | DIS | M4)) /* GPIO_6 */\
+	MUX_VAL(CP(SYS_BOOT5),      (IEN  | PTD | DIS | M4)) /* GPIO_7 */\
+	MUX_VAL(CP(SYS_BOOT6),      (IEN  | PTD | DIS | M4)) /* GPIO_8 */\
+	MUX_VAL(CP(SDRC_CKE0),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE0 */\
+	MUX_VAL(CP(SDRC_CKE1),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE1 */
+#endif
boards.cfg +1 -0
index 202de1a..6f8db44 100644
@@ -262,6 +262,7 @@ omap4_panda	arm	armv7		panda		ti		omap4
 omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
 am3517_evm	arm	armv7		am3517evm	logicpd		omap3
 devkit8000	arm	armv7		devkit8000	timll		omap3
+igep0020	arm	armv7		igep0020	isee		omap3
 s5p_goni	arm	armv7		goni		samsung		s5pc1xx
 smdkc100	arm	armv7		smdkc100	samsung		s5pc1xx
 ixdpg425	arm	ixp
include/configs/igep0020.h new file +65 -0
new file mode 100644
index 0000000..a884c3e
@@ -0,0 +1,230 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP		1	/* in a TI OMAP core */
+#define CONFIG_OMAP34XX		1	/* which is a 34XX */
+#define CONFIG_OMAP3430		1	/* which is in a 3430 */
+#define CONFIG_OMAP3_IGEP0020	1	/* working with IGEP0020 */
+
+#define CONFIG_SDRC	/* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_REVISION_TAG		1
+
+/*
+ * NS16550 Configuration
+ */
+
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

include/configs/igep0020.h line 75

Quoted 10 lines
include/configs/igep0020.h new file +10 -0
+
+/* select serial console configuration */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,115200}

Need a space after the 57600 comma.

Quoted 141 lines
include/configs/igep0020.h new file +141 -0
+#define CONFIG_MMC			1
+#define CONFIG_OMAP3_MMC		1
+#define CONFIG_DOS_PARTITION		1
+
+/* DDR  */
+#define CONFIG_OMAP3_NUMONYX_DDR	1
+
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+#define CONFIG_TWL4030_USB		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"IGEP"
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+#define CONFIG_CMD_FAT		/* FAT support			*/
+#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
+#define CONFIG_CMD_MMC		/* MMC support			*/
+#define CONFIG_CMD_ONENAND	/* ONENAND support		*/
+#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS		/* NFS support			*/
+#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands	*/
+#define CONFIG_MTD_DEVICE
+
+#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
+#undef CONFIG_CMD_IMLS		/* List all found images	*/
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C_BUS		0
+#define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_DRIVER_OMAP34XX_I2C	1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER		1
+
+/* Environment information */
+#define CONFIG_BOOTCOMMAND \
+	"mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
+
+#define CONFIG_BOOTDELAY		3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"usbtty=cdc_acm\0"
+
+#define CONFIG_AUTO_COMPLETE		1
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"U-Boot # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
+								/* works on */
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
+							/* load address */
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ *
+ */
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE	(32 << 20)	/*@least 32 meg */
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C		1
+
+/*
+ * FLASH and environment organization
+ */
+
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M /* Configure the PISMO */
+
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+
+#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
+
+#define CONFIG_ENV_IS_IN_ONENAND	1
+#define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
+#define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* bytes for initial data */
+
+/*
+ * SMSC911x Ethernet

include/configs/igep0020.h line 226

Quoted 10 lines
include/configs/igep0020.h new file +10 -0
+ */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE	0x2C000000
+#endif /* (CONFIG_CMD_NET) */
+
+/* additions for new relocation code, must added to all boards */
+#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */

You should omit the 2 previous lines.

include/configs/igep0020.h line 230

Quoted 4 lines
include/configs/igep0020.h new file +4 -0
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+
+#endif /* __CONFIG_H */

Otherwise looks reasonable. I'll build & run test when I get some time tomorrow or Monday.

Steve