Skip to contentSkip to conversation

Add support for the IGEP v2 board.

PATCH Superseded Enric Balletbo i Serra 2 participants 9 messages Oct 10, 2010

Subsystems (4)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add support for the IGEP v2 board.

Hello,

This is the second version of patch series to add initial support for OMAP3 IGEP v2 board. Thanks Steve for your comments.

Changes since v1:
- [2/3] fix parens in NUMONYX_V_ACTIMB_165 define
- [3/3] add extra space after first &ctrl_base in file igep0020.c
- [3/3] add a space after the 57600 comma in file igep0020.h
- [3/3] remove CONFIG_SYS_ARM_WITHOUT_RELOC undef

$ git diff --stat origin/master
 MAKEALL                               |    1 +
 arch/arm/include/asm/arch-omap3/mem.h |   42 ++++++
 board/isee/igep0020/Makefile          |   49 +++++++
 board/isee/igep0020/config.mk         |   33 +++++
 board/isee/igep0020/igep0020.c        |  128 ++++++++++++++++++
 board/isee/igep0020/igep0020.h        |  156 ++++++++++++++++++++++
 boards.cfg                            |    1 +
 drivers/mtd/onenand/onenand_base.c    |    1 +
 include/configs/igep0020.h            |  228 +++++++++++++++++++++++++++++++++
 include/linux/mtd/onenand.h           |    1 +
 10 files changed, 640 insertions(+), 0 deletions(-)
#1 lore raw

PATCH v2 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx

This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers.

---
 drivers/mtd/onenand/onenand_base.c |    1 +
 include/linux/mtd/onenand.h        |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)
drivers/mtd/onenand/onenand_base.c +1 -0
index f9273ab..c978420 100644
@@ -2214,6 +2214,7 @@ char *onenand_print_device_info(int device, int version)
 
 static const struct onenand_manufacturers onenand_manuf_ids[] = {
 	{ONENAND_MFR_SAMSUNG, "Samsung"},
+	{ONENAND_MFR_NUMONYX, "Numonyx"},
 };
 
 /**
include/linux/mtd/onenand.h +1 -0
index 68e174e..0025fd0 100644
@@ -155,6 +155,7 @@ struct onenand_chip {
  * OneNAND Flash Manufacturer ID Codes
  */
 #define ONENAND_MFR_SAMSUNG	0xec
+#define ONENAND_MFR_NUMONYX	0x20
 
 /**
  * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH v2 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx

Dear Enric Balletbo i Serra,

Quoted 14 lines · In message <[email protected]> you wrote:

This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers.

---
 drivers/mtd/onenand/onenand_base.c |    1 +
 include/linux/mtd/onenand.h        |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)
drivers/mtd/onenand/onenand_base.c +0 -0
index f9273ab..c978420 100644

drivers/mtd/onenand/onenand_base.c char *onenand_print_device_info(int device, int version) · line 2218

Quoted 5 lines
drivers/mtd/onenand/onenand_base.c +1 -0
@@ -2214,6 +2214,7 @@ char *onenand_print_device_info(int device, int version)
 
 static const struct onenand_manufacturers onenand_manuf_ids[] = {
 	{ONENAND_MFR_SAMSUNG, "Samsung"},
+	{ONENAND_MFR_NUMONYX, "Numonyx"},
 };

Can we please keep lists like this...

include/linux/mtd/onenand.h struct onenand_chip { · line 158

Quoted 9 lines
include/linux/mtd/onenand.h +1 -0
index 68e174e..0025fd0 100644
@@ -155,6 +155,7 @@ struct onenand_chip {
  * OneNAND Flash Manufacturer ID Codes
  */
 #define ONENAND_MFR_SAMSUNG	0xec
+#define ONENAND_MFR_NUMONYX	0x20

...and this sorted? Thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Genius doesn't work on an assembly line basis.  You can't simply say,
"Today I will be brilliant."
	-- Kirk, "The Ultimate Computer", stardate 4731.3
#3 lore raw

PATCH v2 2/3 OMAP3: SDRC: Introduce Numonyx DDR type

In reply to Enric Balletbo i Serra

Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings.

---
 arch/arm/include/asm/arch-omap3/mem.h |   42 +++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-omap3/mem.h +42 -0
index a78cf9f..d574f89 100644
@@ -128,6 +128,44 @@ enum {
 		(MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) |	\
 		(MICRON_TWTR_165 << 16))
 
+/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
+ *   ACTIMA
+ *      TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
+ *      TDPL (Twr) = 15/6 = 2.5 -> 3
+ *      TRRD = 12/6 = 2
+ *      TRCD = 22.5/6 = 3.75 -> 4
+ *      TRP  = 18/6 = 3
+ *      TRAS = 42/6 = 7
+ *      TRC  = 60/6 = 10
+ *      TRFC = 140/6 = 23.3 -> 24
+ *   ACTIMB
+ *	TWTR = 2
+ *	TCKE = 2
+ *	TXSR = 200/6 =  33.3 -> 34
+ *	TXP  = 1.0 + 1.1 = 2.1 -> 3
+ */
+#define NUMONYX_TDAL_165   6
+#define NUMONYX_TDPL_165   3
+#define NUMONYX_TRRD_165   2
+#define NUMONYX_TRCD_165   4
+#define NUMONYX_TRP_165    3
+#define NUMONYX_TRAS_165   7
+#define NUMONYX_TRC_165   10
+#define NUMONYX_TRFC_165  24
+#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \
+		(NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \
+		(NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \
+		(NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \
+		(NUMONYX_TDAL_165))
+
+#define NUMONYX_TWTR_165   2
+#define NUMONYX_TCKE_165   2
+#define NUMONYX_TXP_165    3
+#define NUMONYX_XSR_165    34
+#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \
+		(NUMONYX_XSR_165 << 0) | (NUMONYX_TXP_165 << 8) | \
+		(NUMONYX_TWTR_165 << 16))
+
 #ifdef CONFIG_OMAP3_INFINEON_DDR
 #define V_ACTIMA_165 INFINEON_V_ACTIMA_165
 #define V_ACTIMB_165 INFINEON_V_ACTIMB_165
@@ -136,6 +174,10 @@ enum {
 #define V_ACTIMA_165 MICRON_V_ACTIMA_165
 #define V_ACTIMB_165 MICRON_V_ACTIMB_165
 #endif
+#ifdef CONFIG_OMAP3_NUMONYX_DDR
+#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
+#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
+#endif
 
 #if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165)
 #error "Please choose the right DDR type in config header"
Signature · 1 line
1.7.0.4
#4 lore raw

PATCH v2 2/3 OMAP3: SDRC: Introduce Numonyx DDR type

Dear Enric Balletbo i Serra,

Quoted 13 lines · In message <[email protected]> you wrote:

Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings.

---
 arch/arm/include/asm/arch-omap3/mem.h |   42 +++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-omap3/mem.h +0 -0
index a78cf9f..d574f89 100644

arch/arm/include/asm/arch-omap3/mem.h enum { · line 132

Quoted 5 lines
arch/arm/include/asm/arch-omap3/mem.h +2 -0
@@ -128,6 +128,44 @@ enum {
 		(MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) |	\
 		(MICRON_TWTR_165 << 16))
 
+/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
+ *   ACTIMA

Incorrect multiline comment style. Please break into:

	/*
	 * NUMONYX part ...
Quoted 40 lines
arch/arm/include/asm/arch-omap3/mem.h +36 -0
+ *      TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
+ *      TDPL (Twr) = 15/6 = 2.5 -> 3
+ *      TRRD = 12/6 = 2
+ *      TRCD = 22.5/6 = 3.75 -> 4
+ *      TRP  = 18/6 = 3
+ *      TRAS = 42/6 = 7
+ *      TRC  = 60/6 = 10
+ *      TRFC = 140/6 = 23.3 -> 24
+ *   ACTIMB
+ *	TWTR = 2
+ *	TCKE = 2
+ *	TXSR = 200/6 =  33.3 -> 34
+ *	TXP  = 1.0 + 1.1 = 2.1 -> 3
+ */
+#define NUMONYX_TDAL_165   6
+#define NUMONYX_TDPL_165   3
+#define NUMONYX_TRRD_165   2
+#define NUMONYX_TRCD_165   4
+#define NUMONYX_TRP_165    3
+#define NUMONYX_TRAS_165   7
+#define NUMONYX_TRC_165   10
+#define NUMONYX_TRFC_165  24
+#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \
+		(NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \
+		(NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \
+		(NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \
+		(NUMONYX_TDAL_165))
+
+#define NUMONYX_TWTR_165   2
+#define NUMONYX_TCKE_165   2
+#define NUMONYX_TXP_165    3
+#define NUMONYX_XSR_165    34
+#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \
+		(NUMONYX_XSR_165 << 0) | (NUMONYX_TXP_165 << 8) | \
+		(NUMONYX_TWTR_165 << 16))
+
 #ifdef CONFIG_OMAP3_INFINEON_DDR
 #define V_ACTIMA_165 INFINEON_V_ACTIMA_165
 #define V_ACTIMB_165 INFINEON_V_ACTIMB_165

arch/arm/include/asm/arch-omap3/mem.h enum { · line 180

Quoted 7 lines
arch/arm/include/asm/arch-omap3/mem.h +4 -0
@@ -136,6 +174,10 @@ enum {
 #define V_ACTIMA_165 MICRON_V_ACTIMA_165
 #define V_ACTIMB_165 MICRON_V_ACTIMB_165
 #endif
+#ifdef CONFIG_OMAP3_NUMONYX_DDR
+#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
+#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
+#endif

You are using exactly the same settings as for the #ifdef CONFIG_OMAP3_MICRON_DDR above. Why do you repeat the lines then? Rather use a "#if defined(...) || defined(...)"

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Often it is fatal to live too long.                          - Racine
#5 lore raw

PATCH v2 2/3 OMAP3: SDRC: Introduce Numonyx DDR type

Hi Wolfgang

2010/10/10 Wolfgang Denk <[email protected]>:

Quoted 19 lines

Dear Enric Balletbo i Serra,

Quoted 16 lines · In message <[email protected]> you wrote:

Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings.

---
?arch/arm/include/asm/arch-omap3/mem.h | ? 42 +++++++++++++++++++++++++++++++++ ?1 files changed, 42 insertions(+), 0 deletions(-)

arch/arm/include/asm/arch-omap3/mem.h +0 -0
index a78cf9f..d574f89 100644
@@ -128,6 +128,44 @@ enum {
 ? ? ? ? ? ? ? (MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) | \
 ? ? ? ? ? ? ? (MICRON_TWTR_165 << 16))
 
Quoted 7 lines

arch/arm/include/asm/arch-omap3/mem.h enum { · line 132

Quoted 2 lines
arch/arm/include/asm/arch-omap3/mem.h +2 -0
+/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
+ * ? ACTIMA

Incorrect multiline comment style. Please break into:

? ? ? ?/*
? ? ? ? * NUMONYX part ...

I'll fix in version 3

Quoted 45 lines
Quoted 45 lines
arch/arm/include/asm/arch-omap3/mem.h +36 -0
+ * ? ? ?TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
+ * ? ? ?TDPL (Twr) = 15/6 = 2.5 -> 3
+ * ? ? ?TRRD = 12/6 = 2
+ * ? ? ?TRCD = 22.5/6 = 3.75 -> 4
+ * ? ? ?TRP ?= 18/6 = 3
+ * ? ? ?TRAS = 42/6 = 7
+ * ? ? ?TRC ?= 60/6 = 10
+ * ? ? ?TRFC = 140/6 = 23.3 -> 24
+ * ? ACTIMB
+ * ? TWTR = 2
+ * ? TCKE = 2
+ * ? TXSR = 200/6 = ?33.3 -> 34
+ * ? TXP ?= 1.0 + 1.1 = 2.1 -> 3
+ */
+#define NUMONYX_TDAL_165 ? 6
+#define NUMONYX_TDPL_165 ? 3
+#define NUMONYX_TRRD_165 ? 2
+#define NUMONYX_TRCD_165 ? 4
+#define NUMONYX_TRP_165 ? ?3
+#define NUMONYX_TRAS_165 ? 7
+#define NUMONYX_TRC_165 ? 10
+#define NUMONYX_TRFC_165 ?24
+#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \
+ ? ? ? ? ? ? (NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \
+ ? ? ? ? ? ? (NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \
+ ? ? ? ? ? ? (NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \
+ ? ? ? ? ? ? (NUMONYX_TDAL_165))
+
+#define NUMONYX_TWTR_165 ? 2
+#define NUMONYX_TCKE_165 ? 2
+#define NUMONYX_TXP_165 ? ?3
+#define NUMONYX_XSR_165 ? ?34
+#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \
+ ? ? ? ? ? ? (NUMONYX_XSR_165 << 0) | (NUMONYX_TXP_165 << 8) | \
+ ? ? ? ? ? ? (NUMONYX_TWTR_165 << 16))
+

?#ifdef CONFIG_OMAP3_INFINEON_DDR
?#define V_ACTIMA_165 INFINEON_V_ACTIMA_165
?#define V_ACTIMB_165 INFINEON_V_ACTIMB_165

arch/arm/include/asm/arch-omap3/mem.h +0 -0
@@ -136,6 +174,10 @@ enum {

?#define V_ACTIMA_165 MICRON_V_ACTIMA_165
?#define V_ACTIMB_165 MICRON_V_ACTIMB_165
?#endif

Quoted 8 lines

arch/arm/include/asm/arch-omap3/mem.h enum { · line 180

Quoted 4 lines
arch/arm/include/asm/arch-omap3/mem.h +4 -0
+#ifdef CONFIG_OMAP3_NUMONYX_DDR
+#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
+#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
+#endif

You are using exactly the same settings as for the #ifdef CONFIG_OMAP3_MICRON_DDR ?above. Why do you repeat the lines then? Rather use a "#if defined(...) || defined(...)"

I'm not agree the timmings are not the same, here a list of differences

MICRON_TRCD_165(3) != NUMONYX_TRCD_165(4)
MICRON_TRFC_165(21) != NUMONYX_TRFC_165(24)
MICRON_TWTR_165(1) != NUMONYX_TWTR_165(2)
MICRON_TCKE_165(1) != NUMONYX_TCKE_165(2)
MICRON_XSR_165(23) != NUMONYX_XSR_165(34)
MICRON_TXP_165(5) != NUMONYX_TXP_165(3)

I'll send the version 3 with all your comments except this.

Cheers,
Enric

#6 lore raw

PATCH v2 2/3 OMAP3: SDRC: Introduce Numonyx DDR type

Dear =?UTF-8?Q?Enric_Balletb=C3=B2_i_Serra?=,

Quoted 14 lines · In message <[email protected]> you…
Quoted 13 lines

arch/arm/include/asm/arch-omap3/mem.h enum { · line 180

Quoted 9 lines
arch/arm/include/asm/arch-omap3/mem.h +4 -0
@@ -136,6 +174,10 @@ enum {
  #define V_ACTIMA_165 MICRON_V_ACTIMA_165
  #define V_ACTIMB_165 MICRON_V_ACTIMB_165
  #endif
+#ifdef CONFIG_OMAP3_NUMONYX_DDR
+#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
+#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
+#endif

You are using exactly the same settings as for the
#ifdef CONFIG_OMAP3_MICRON_DDR above. Why do you repeat the lines
then? Rather use a "#if defined(...) || defined(...)"

Quoted 1 line

I'm not agree the timmings are not the same, here a list of differences

Oops. I misread this. Sorry for the confusion.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Anyone attempting to generate random numbers by deterministic  means
is, of course, living in a state of sin."          - John Von Neumann
#7 lore raw

PATCH v2 3/3 OMAP3: Add support for the IGEP v2 board.

In reply to Enric Balletbo i Serra

The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.

---
 MAKEALL                        |    1 +
 board/isee/igep0020/Makefile   |   49 +++++++++
 board/isee/igep0020/config.mk  |   33 ++++++
 board/isee/igep0020/igep0020.c |  128 ++++++++++++++++++++++
 board/isee/igep0020/igep0020.h |  156 +++++++++++++++++++++++++++
 boards.cfg                     |    1 +
 include/configs/igep0020.h     |  228 ++++++++++++++++++++++++++++++++++++++++
 7 files changed, 596 insertions(+), 0 deletions(-)
 create mode 100644 board/isee/igep0020/Makefile
 create mode 100644 board/isee/igep0020/config.mk
 create mode 100644 board/isee/igep0020/igep0020.c
 create mode 100644 board/isee/igep0020/igep0020.h
 create mode 100644 include/configs/igep0020.h
MAKEALL +1 -0
index 1b506d6..78dce8b 100755
@@ -490,6 +490,7 @@ LIST_ARM11="			\
 LIST_ARMV7="		\
 	am3517_evm		\
 	devkit8000		\
+	igep0020		\
 	mx51evk			\
 	omap3_beagle		\
 	omap3_overo		\
board/isee/igep0020/Makefile new file +49 -0

49 lines not on this page · raw message

board/isee/igep0020/config.mk new file +33 -0
new file mode 100644
index 0000000..b8812f9
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2009
+# ISEE 2007 SL, <www.iseebcn.com>
+#
+# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80008000
board/isee/igep0020/igep0020.c new file +128 -0

128 lines not on this page · raw message

board/isee/igep0020/igep0020.h new file +156 -0

156 lines not on this page · raw message

boards.cfg +1 -0
index 202de1a..6f8db44 100644
@@ -262,6 +262,7 @@ omap4_panda	arm	armv7		panda		ti		omap4
 omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
 am3517_evm	arm	armv7		am3517evm	logicpd		omap3
 devkit8000	arm	armv7		devkit8000	timll		omap3
+igep0020	arm	armv7		igep0020	isee		omap3
 s5p_goni	arm	armv7		goni		samsung		s5pc1xx
 smdkc100	arm	armv7		smdkc100	samsung		s5pc1xx
 ixdpg425	arm	ixp
include/configs/igep0020.h new file +228 -0

228 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#8 lore raw

PATCH v2 3/3 OMAP3: Add support for the IGEP v2 board.

Dear Enric Balletbo i Serra,

Quoted 6 lines · In message <[email protected]> you wrote:

The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.

Quoted 14 lines
---
 MAKEALL                        |    1 +
 board/isee/igep0020/Makefile   |   49 +++++++++
 board/isee/igep0020/config.mk  |   33 ++++++
 board/isee/igep0020/igep0020.c |  128 ++++++++++++++++++++++
 board/isee/igep0020/igep0020.h |  156 +++++++++++++++++++++++++++
 boards.cfg                     |    1 +
 include/configs/igep0020.h     |  228 ++++++++++++++++++++++++++++++++++++++++
 7 files changed, 596 insertions(+), 0 deletions(-)
 create mode 100644 board/isee/igep0020/Makefile
 create mode 100644 board/isee/igep0020/config.mk
 create mode 100644 board/isee/igep0020/igep0020.c
 create mode 100644 board/isee/igep0020/igep0020.h
 create mode 100644 include/configs/igep0020.h

Entry to MAINTAINERS missing.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Fascinating, a totally parochial attitude.
	-- Spock, "Metamorphosis", stardate 3219.8