at91: Add support for linux-2.6.38
PATCH 1/3 at91: Add support for linux-2.6.38
From: Ulf Samuelsson <[email protected]>
--- conf/machine/include/at91-2.6.38.inc | 39 + recipes/linux/linux-2.6.38/at572d940hfek/defconfig | 2044 ++ ...Maxim-patch-updated-from-2.6.30-to-2.6.38.patch |17834 +++++++++++++ .../0002-Add-MACB-TX-Buffer-in-SRAM-support.patch | 214 + ...mci-Platform-configuration-to-the-the-atm.patch | 506 + ...04-at91_mci-Do-a-reset-after-each-request.patch | 37 + ...sam9g20ek-modify-dual-slot-evaluation-kit.patch | 105 + ...1-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch | 97 + .../0007-Bug-workaround-for-channel-in-ac97.patch | 31 + ...atmel_tsadcc-report-fake-pressure-measure.patch | 47 + ...e-SD-MMC-Write-Protect-pin-connected-on-a.patch | 35 + ...dify-SRAM-location-of-descriptor-buffers-.patch | 34 + ...dd-pwm-support-in-Kconfig-for-at91sam9g45.patch | 29 + ...-I2C-definitions-for-at91sam9g20ek-boards.patch | 54 + ...013-at91-add-at91sam9g10ek-defconfig-file.patch | 1546 ++ .../0014-t91-add-at91sam9m10ekes-support.patch | 1860 ++ ...m9m10-add-dma-touchscreen-mmc-usb-host-an.patch | 93 + ...-at91-at91sam9m10-add-video-decoder-clock.patch | 57 + ...0017-at91sam9m10-add-on2-8170-gpl-modules.patch | 1264 + ...atmel-ac97-add-warm-reset-if-no-reset-pin.patch | 37 + ...019-at91-introduce-at91sam9m10g45ek-board.patch | 121 + ..._tsadcc-introduce-changes-needed-for-at91.patch | 179 + ...91-Clean-up-choiuce-of-sam9m10-g45-boards.patch | 74 + ...pport-for-configurable-NAND-flash-partiti.patch | 447 + ...-Update-defconfig-s-for-atmel-at91-boards.patch |27031 ++++++++++++++++++++ .../at91/0024-at91-Cleanup-of-defconfig-s.patch | 6099 +++++ recipes/linux/linux-2.6.38/at91cap9adk/defconfig | 1656 ++ recipes/linux/linux-2.6.38/at91cap9stk/defconfig | 1656 ++ recipes/linux/linux-2.6.38/at91rm9200/defconfig | 2197 ++ recipes/linux/linux-2.6.38/at91rm9200dk/defconfig | 1621 ++ recipes/linux/linux-2.6.38/at91rm9200ek/defconfig | 1632 ++ recipes/linux/linux-2.6.38/at91sam9260ek/defconfig | 1800 ++ recipes/linux/linux-2.6.38/at91sam9261ek/defconfig | 1836 ++ recipes/linux/linux-2.6.38/at91sam9263ek/defconfig | 1846 ++ recipes/linux/linux-2.6.38/at91sam9g10ek/defconfig | 1700 ++ recipes/linux/linux-2.6.38/at91sam9g20ek/defconfig | 1785 ++ .../linux-2.6.38/at91sam9g20ek_2mmc/defconfig | 1774 ++ .../linux/linux-2.6.38/at91sam9g45ekes/defconfig | 1831 ++ .../linux/linux-2.6.38/at91sam9m10ekes/defconfig | 1829 ++ .../linux/linux-2.6.38/at91sam9m10g45ek/defconfig | 1829 ++ recipes/linux/linux-2.6.38/at91sam9rlek/defconfig | 1672 ++ recipes/linux/linux-2.6.38/at91sam9xeek/defconfig | 1677 ++ 42 files changed, 88255 insertions(+), 0 deletions(-) create mode 100644 conf/machine/include/at91-2.6.38.inc create mode 100644 recipes/linux/linux-2.6.38/at572d940hfek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91/0001-Maxim-patch-updated-from-2.6.30-to-2.6.38.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0002-Add-MACB-TX-Buffer-in-SRAM-support.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0003-AT91-atmel-mci-Platform-configuration-to-the-the-atm.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0004-at91_mci-Do-a-reset-after-each-request.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0005-at91-at91sam9g20ek-modify-dual-slot-evaluation-kit.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0006-at91-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0007-Bug-workaround-for-channel-in-ac97.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0008-input-atmel_tsadcc-report-fake-pressure-measure.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0009-at91-No-more-SD-MMC-Write-Protect-pin-connected-on-a.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0010-net-macb-modify-SRAM-location-of-descriptor-buffers-.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0011-at91-add-pwm-support-in-Kconfig-for-at91sam9g45.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0012-at91-add-I2C-definitions-for-at91sam9g20ek-boards.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0013-at91-add-at91sam9g10ek-defconfig-file.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0014-t91-add-at91sam9m10ekes-support.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0015-at91-at91sam9m10-add-dma-touchscreen-mmc-usb-host-an.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0016-at91-at91sam9m10-add-video-decoder-clock.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0017-at91sam9m10-add-on2-8170-gpl-modules.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0018-sound-atmel-ac97-add-warm-reset-if-no-reset-pin.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0019-at91-introduce-at91sam9m10g45ek-board.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0020-input-atmel_tsadcc-introduce-changes-needed-for-at91.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0021-at91-Clean-up-choiuce-of-sam9m10-g45-boards.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0022-at91-Add-support-for-configurable-NAND-flash-partiti.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0023-at91-Update-defconfig-s-for-atmel-at91-boards.patch create mode 100644 recipes/linux/linux-2.6.38/at91/0024-at91-Cleanup-of-defconfig-s.patch create mode 100644 recipes/linux/linux-2.6.38/at91cap9adk/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91cap9stk/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91rm9200/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91rm9200dk/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91rm9200ek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9260ek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9261ek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9263ek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9g10ek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9g20ek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9g20ek_2mmc/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9g45ekes/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9m10ekes/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9m10g45ek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9rlek/defconfig create mode 100644 recipes/linux/linux-2.6.38/at91sam9xeek/defconfig
conf/machine/include/at91-2.6.38.inc new file +39 -0
@@ -0,0 +1,39 @@ +# Common description for Atmel ARM processors + +TARGET_ARCH = "arm" +#PACKAGE_EXTRA_ARCHS = "armv4t armv5te" +SOC_FAMILY = "at91" + +PREFERRED_PROVIDER_virtual/kernel = "linux" +PREFERRED_VERSION_linux = "2.6.38" + +PREFERRED_PROVIDER_at91bootstrap = "at91bootstrap" +PREFERRED_VERSION_at91bootstrap = "3.0" + +PREFERRED_PROVIDER_u-boot = "u-boot" +PREFERRED_VERSION_u-boot = "2009.11" + +KERNEL_IMAGETYPE = "uImage" + +#don't try to access tty1 +USE_VT = "0" + +MACHINE_FEATURES = " kernel26 alsa ext2 usbgadget vfat uboot " +EXTRA_IMAGEDEPENDS += "u-boot" +EXTRA_IMAGEDEPENDS += "at91bootstrap" + +MACHINE_EXTRA_RDEPENDS += " kernel-modules " +#MACHINE_EXTRA_RDEPENDS += " atmel-fixes " + +# used by sysvinit_2 +SERIAL_CONSOLE = "115200 ttyS0" +IMAGE_FSTYPES ?= "jffs2" +EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" +# +# Uncomment or add kernel modules that should be autoloaded +#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_file_storage', '',d)} +#module_autoload_g_ether = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_ether', '',d)} +module_autoload_g_serial = ${@base_contains('MACHINE_FEATURES', 'usbgadget', 'g_serial', '',d)} + +require conf/machine/include/tune-arm926ejs.inc +
recipes/linux/linux-2.6.38/at572d940hfek/defconfig new file +2044 -0
2,044 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0001-Maxim-patch-updated-from-2.6.30-to-2.6.38.patch new file +17834 -0
917 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0002-Add-MACB-TX-Buffer-in-SRAM-support.patch new file +214 -0
214 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0003-AT91-atmel-mci-Platform-configuration-to-the-the-atm.patch new file +506 -0
506 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0004-at91_mci-Do-a-reset-after-each-request.patch new file +37 -0
Lines of this file are not shown. View the raw message.
recipes/linux/linux-2.6.38/at91/0005-at91-at91sam9g20ek-modify-dual-slot-evaluation-kit.patch new file +105 -0
105 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0006-at91-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch new file +97 -0
97 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0007-Bug-workaround-for-channel-in-ac97.patch new file +31 -0
Lines of this file are not shown. View the raw message.
recipes/linux/linux-2.6.38/at91/0008-input-atmel_tsadcc-report-fake-pressure-measure.patch new file +47 -0
47 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0009-at91-No-more-SD-MMC-Write-Protect-pin-connected-on-a.patch new file +35 -0
Lines of this file are not shown. View the raw message.
recipes/linux/linux-2.6.38/at91/0010-net-macb-modify-SRAM-location-of-descriptor-buffers-.patch new file +34 -0
Lines of this file are not shown. View the raw message.
recipes/linux/linux-2.6.38/at91/0011-at91-add-pwm-support-in-Kconfig-for-at91sam9g45.patch new file +29 -0
Lines of this file are not shown. View the raw message.
recipes/linux/linux-2.6.38/at91/0012-at91-add-I2C-definitions-for-at91sam9g20ek-boards.patch new file +54 -0
54 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0013-at91-add-at91sam9g10ek-defconfig-file.patch new file +1546 -0
1,546 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0014-t91-add-at91sam9m10ekes-support.patch new file +1860 -0
1,860 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0015-at91-at91sam9m10-add-dma-touchscreen-mmc-usb-host-an.patch new file +93 -0
93 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0016-at91-at91sam9m10-add-video-decoder-clock.patch new file +57 -0
57 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0017-at91sam9m10-add-on2-8170-gpl-modules.patch new file +1264 -0
1,264 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0018-sound-atmel-ac97-add-warm-reset-if-no-reset-pin.patch new file +37 -0
Lines of this file are not shown. View the raw message.
recipes/linux/linux-2.6.38/at91/0019-at91-introduce-at91sam9m10g45ek-board.patch new file +121 -0
121 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0020-input-atmel_tsadcc-introduce-changes-needed-for-at91.patch new file +179 -0
179 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0021-at91-Clean-up-choiuce-of-sam9m10-g45-boards.patch new file +74 -0
74 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0022-at91-Add-support-for-configurable-NAND-flash-partiti.patch new file +447 -0
447 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0023-at91-Update-defconfig-s-for-atmel-at91-boards.patch new file +27031 -0
27,031 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91/0024-at91-Cleanup-of-defconfig-s.patch new file +6099 -0
6,099 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91cap9adk/defconfig new file +1656 -0
1,656 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91cap9stk/defconfig new file +1656 -0
1,656 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91rm9200/defconfig new file +2197 -0
2,197 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91rm9200dk/defconfig new file +1621 -0
1,621 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91rm9200ek/defconfig new file +1632 -0
1,632 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9260ek/defconfig new file +1800 -0
1,800 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9261ek/defconfig new file +1836 -0
1,836 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9263ek/defconfig new file +1846 -0
1,846 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9g10ek/defconfig new file +1700 -0
1,700 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9g20ek/defconfig new file +1785 -0
1,785 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9g20ek_2mmc/defconfig new file +1774 -0
1,774 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9g45ekes/defconfig new file +1831 -0
1,831 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9m10ekes/defconfig new file +1829 -0
1,829 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9m10g45ek/defconfig new file +1829 -0
1,829 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9rlek/defconfig new file +1672 -0
1,672 lines not on this page · raw message
recipes/linux/linux-2.6.38/at91sam9xeek/defconfig new file +1677 -0
1,677 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.7.4.1
Part of the diff is not shown here. View the raw message.
PATCH 2/3 Add at91 support for linux-2.6.38
From: Ulf Samuelsson <[email protected]>
--- recipes/linux/linux_2.6.38.bb | 45 ++++++++++++++++++++++++++++++++++++++++- 1 files changed, 44 insertions(+), 1 deletions(-)
recipes/linux/linux_2.6.38.bb +44 -1
@@ -1,6 +1,6 @@ require linux.inc -PR = "r3" +PR = "r4" # Mark archs/machines that this kernel supports DEFAULT_PREFERENCE = "-1"
@@ -12,11 +12,54 @@ DEFAULT_PREFERENCE_poodle = "1" DEFAULT_PREFERENCE_spitz = "1" DEFAULT_PREFERENCE_tosa = "1" DEFAULT_PREFERENCE_ts72xx = "1" +DEFAULT_PREFERENCE_at572d940hfek = "4" +DEFAULT_PREFERENCE_at91cap9adk = "4" +DEFAULT_PREFERENCE_at91rm9200 = "4" +DEFAULT_PREFERENCE_at91rm9200dk = "4" +DEFAULT_PREFERENCE_at91rm9200ek = "4" +DEFAULT_PREFERENCE_at91sam9260ek = "4" +DEFAULT_PREFERENCE_at91sam9261ek = "4" +DEFAULT_PREFERENCE_at91sam9263ek = "4" +DEFAULT_PREFERENCE_at91sam9g10ek = "4" +DEFAULT_PREFERENCE_at91sam9g20ek = "4" +DEFAULT_PREFERENCE_at91sam9g20ek_2mmc = "4" +DEFAULT_PREFERENCE_at91sam9g45ekes = "4" +DEFAULT_PREFERENCE_at91sam9m10ekes = "4" +DEFAULT_PREFERENCE_at91sam9m10g45ek = "4" +DEFAULT_PREFERENCE_at91sam9rlek = "4" +DEFAULT_PREFERENCE_at91sam9xeek = "4" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \ ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.4.bz2;apply=yes;name=stablepatch \ file://defconfig " +SRC_URI_at91 = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \ + file://0001-Maxim-patch-updated-from-2.6.30-to-2.6.38.patch;apply=yes \ + file://0002-Add-MACB-TX-Buffer-in-SRAM-support.patch;apply=yes \ + file://0003-AT91-atmel-mci-Platform-configuration-to-the-the-atm.patch;apply=yes \ + file://0004-at91_mci-Do-a-reset-after-each-request.patch;apply=yes \ + file://0005-at91-at91sam9g20ek-modify-dual-slot-evaluation-kit.patch;apply=yes \ + file://0006-at91-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch;apply=yes \ + file://0007-Bug-workaround-for-channel-in-ac97.patch;apply=yes \ + file://0008-input-atmel_tsadcc-report-fake-pressure-measure.patch;apply=yes \ + file://0009-at91-No-more-SD-MMC-Write-Protect-pin-connected-on-a.patch;apply=yes \ + file://0010-net-macb-modify-SRAM-location-of-descriptor-buffers-.patch;apply=yes \ + file://0011-at91-add-pwm-support-in-Kconfig-for-at91sam9g45.patch;apply=yes \ + file://0012-at91-add-I2C-definitions-for-at91sam9g20ek-boards.patch;apply=yes \ + file://0013-at91-add-at91sam9g10ek-defconfig-file.patch;apply=yes \ + file://0014-t91-add-at91sam9m10ekes-support.patch;apply=yes \ + file://0015-at91-at91sam9m10-add-dma-touchscreen-mmc-usb-host-an.patch;apply=yes \ + file://0016-at91-at91sam9m10-add-video-decoder-clock.patch;apply=yes \ + file://0017-at91sam9m10-add-on2-8170-gpl-modules.patch;apply=yes \ + file://0018-sound-atmel-ac97-add-warm-reset-if-no-reset-pin.patch;apply=yes \ + file://0019-at91-introduce-at91sam9m10g45ek-board.patch;apply=yes \ + file://0020-input-atmel_tsadcc-introduce-changes-needed-for-at91.patch;apply=yes \ + file://0021-at91-Clean-up-choiuce-of-sam9m10-g45-boards.patch;apply=yes \ + file://0022-at91-Add-support-for-configurable-NAND-flash-partiti.patch;apply=yes \ + file://0023-at91-Update-defconfig-s-for-atmel-at91-boards.patch;apply=yes \ + file://0024-at91-Cleanup-of-defconfig-s.patch;apply=yes \ + file://defconfig " + SRC_URI_append_akita = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 " SRC_URI_append_c7x0 = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 " SRC_URI_append_collie = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 "
Signature · 1 line
1.7.4.1
PATCH 3/3 at91: use linux-2.6.38
In reply to [email protected]From: Ulf Samuelsson <[email protected]>
--- conf/machine/at91cap9adk.conf | 28 ++++++++++------------------ conf/machine/at91sam9260ek.conf | 26 +++++++++----------------- conf/machine/at91sam9261ek.conf | 28 +++++++++++----------------- conf/machine/at91sam9263ek.conf | 33 +++++++++++++++------------------ conf/machine/at91sam9g10ek.conf | 15 ++++++++++++--- conf/machine/at91sam9g20ek.conf | 17 +++++++++++------ conf/machine/at91sam9g45ek.conf | 16 +++++----------- conf/machine/at91sam9g45ekes.conf | 22 +++++++++++----------- conf/machine/at91sam9m10ekes.conf | 13 ++++--------- conf/machine/at91sam9m10g45ek.conf | 12 +++++------- conf/machine/at91sam9rlek.conf | 29 +++++++++-------------------- 11 files changed, 102 insertions(+), 137 deletions(-)
conf/machine/at91cap9adk.conf +10 -18
@@ -2,27 +2,19 @@ #@Name: Atmel AT91CAP9ADK Development Platform #@DESCRIPTION: Machine configuration for the at91cap9adk development board with a at91cap9500 processor -TARGET_ARCH = "arm" +include conf/machine/include/at91-2.6.38.inc +include conf/machine/include/at91-lcd.inc -PREFERRED_PROVIDER_virtual/kernel = "linux" -PREFERRED_VERSION_linux = "2.6.28" -PREFERRED_PROVIDER_xserver = "xserver-kdrive" +# Has linux config file in OpenEmbedded +# +# LINUX26_DEFCONFIG = "at91cap9adk_defconfig" -KERNEL_IMAGETYPE = "uImage" -UBOOT_MACHINE = "at91cap9adk_config" - -PREFERRED_VERSION_at91bootstrap = "2.10" -#don't try to access tty1 -USE_VT = "0" +# Supported u-boot machines +UBOOT_MACHINE = "at91cap9adk_config" +UBOOT_MACHINES = " at91cap9adk " -MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen" -EXTRA_IMAGEDEPENDS += "u-boot" -#EXTRA_IMAGEDEPENDS += "at91bootstrap" +AT91BOOTSTRAP_BOARD = " at91cap9adk " -# used by sysvinit_2 -SERIAL_CONSOLE = "115200 ttyS0" -IMAGE_FSTYPES ?= "jffs2" -EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" +MACHINE_FEATURES += " usbhost " -require conf/machine/include/tune-arm926ejs.inc
conf/machine/at91sam9260ek.conf +9 -17
@@ -2,27 +2,19 @@ #@Name: Atmel AT91SAM9260EK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9260ek development board with a at91sam9260 processor -TARGET_ARCH = "arm" -#PACKAGE_EXTRA_ARCHS = "armv4t armv5te" +include conf/machine/include/at91-2.6.38.inc -PREFERRED_PROVIDER_virtual/kernel = "linux" -PREFERRED_VERSION_linux = "2.6.28" -KERNEL_IMAGETYPE = "uImage" -UBOOT_MACHINE = "at91sam9260ek_config" +# Has linux config file in OpenEmbedded +# +# LINUX26_DEFCONFIG = "at91sam9260ek_defconfig" -PREFERRED_VERSION_at91bootstrap = "2.10" -#don't try to access tty1 -USE_VT = "0" +# Supported u-boot machines +UBOOT_MACHINE = "at91sam9260ek_dataflash_cs1_config" -MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget" -EXTRA_IMAGEDEPENDS += "u-boot" -EXTRA_IMAGEDEPENDS += "at91bootstrap" +UBOOT_MACHINES = " at91sam9260ek_nandflash at91sam9260ek_dataflash_cs0 at91sam9260ek_dataflash_cs1 at91sam9260ek " -# used by sysvinit_2 -SERIAL_CONSOLE = "115200 ttyS0" -IMAGE_FSTYPES ?= "jffs2" -EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" +AT91BOOTSTRAP_BOARD = " at91sam9260ek at91sam9260df at91sam9260dfc at91sam9260nf " -require conf/machine/include/tune-arm926ejs.inc +MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9261ek.conf +11 -17
@@ -2,28 +2,22 @@ #@Name: Atmel AT91SAM9261EK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9261ek development board with a at91sam9261 processor -TARGET_ARCH = "arm" -#PACKAGE_EXTRA_ARCHS = "armv4t armv5te" +include conf/machine/include/at91-2.6.38.inc +include conf/machine/include/at91-lcd.inc -PREFERRED_PROVIDER_virtual/kernel = "linux" -PREFERRED_VERSION_linux = "2.6.28" -PREFERRED_PROVIDER_xserver = "xserver-kdrive" +# Has linux config file in OpenEmbedded +# +# LINUX26_DEFCONFIG = "at91sam9261ek_defconfig" -KERNEL_IMAGETYPE = "uImage" + +# Supported u-boot machines UBOOT_MACHINE = "at91sam9261ek_config" -PREFERRED_VERSION_at91bootstrap = "2.10" +UBOOT_MACHINES = " at91sam9261ek_nandflash at91sam9261ek_dataflash_cs0 at91sam9261ek_dataflash_cs3 at91sam9261ek_config " + +AT91BOOTSTRAP_BOARD = " at91sam9261df at91sam9261dfc at91sam9261ek at91sam9261nf " -#don't try to access tty1 -USE_VT = "0" +MACHINE_FEATURES += " usbhost " -MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen" -EXTRA_IMAGEDEPENDS += "u-boot" -EXTRA_IMAGEDEPENDS += "at91bootstrap" -# used by sysvinit_2 -SERIAL_CONSOLE = "115200 ttyS0" -IMAGE_FSTYPES ?= "jffs2" -EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" -require conf/machine/include/tune-arm926ejs.inc
conf/machine/at91sam9263ek.conf +15 -18
@@ -2,29 +2,26 @@ #@Name: Atmel AT91SAM9263EK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9263ek development board with a at91sam9263 processor -TARGET_ARCH = "arm" -#PACKAGE_EXTRA_ARCHS = "armv4t armv5te" +include conf/machine/include/at91-2.6.38.inc +include conf/machine/include/at91-lcd.inc -PREFERRED_PROVIDER_virtual/kernel = "linux" -PREFERRED_VERSION_linux = "2.6.28" -PREFERRED_PROVIDER_xserver = "xserver-kdrive" +# Has linux config file in OpenEmbedded +# +# LINUX26_DEFCONFIG = "at91sam9263ek_defconfig" -KERNEL_IMAGETYPE = "uImage" -UBOOT_MACHINE = "at91sam9263ek_config" -PREFERRED_VERSION_at91bootstrap = "2.10" +# Supported u-boot machines +UBOOT_MACHINE = "at91sam9263ek_config" -#don't try to access tty1 -USE_VT = "0" +UBOOT_MACHINES = " \ + at91sam9263ek_norflash_config \ + at91sam9263ek_norflash_boot_config \ + at91sam9263ek_nandflash \ + at91sam9263ek_dataflash at91sam9263ek_dataflash_cs0 \ + at91sam9263ek_config " -MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen" -EXTRA_IMAGEDEPENDS += "u-boot" -EXTRA_IMAGEDEPENDS += "at91bootstrap" +AT91BOOTSTRAP_BOARD = " at91sam9263df at91sam9263dfc at91sam9263ek at91sam9263nf " -# used by sysvinit_2 -SERIAL_CONSOLE = "115200 ttyS0" -IMAGE_FSTYPES ?= "jffs2" -EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" +MACHINE_FEATURES += " usbhost " -require conf/machine/include/tune-arm926ejs.inc
conf/machine/at91sam9g10ek.conf +12 -3
@@ -2,11 +2,20 @@ #@Name: Atmel AT91SAM9G10EK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9g10ek development board with a at91sam9g10 processor -include conf/machine/include/at91-2.6.30.inc +include conf/machine/include/at91-2.6.38.inc include conf/machine/include/at91-lcd.inc +# Has linux config file in OpenEmbedded +# +# LINUX26_DEFCONFIG = "at91sam9g20ek_defconfig" + + +# Supported u-boot machines UBOOT_MACHINE = "at91sam9g10ek_dataflash_cs0_config" -AT91BOOTSTRAP_BOARD = "at91sam9g10ek at91sam9g10df at91sam9g10nf" -MACHINE_FEATURES += "usbhost" +UBOOT_MACHINES = " at91sam9g10ek_nandflash at91sam9g10ek_dataflash_cs0 at91sam9g10ek_dataflash_cs3 at91sam9g10ek " + +AT91BOOTSTRAP_BOARD = " at91sam9g10ek at91sam9g10df at91sam9g10nf " + +MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9g20ek.conf +11 -6
@@ -2,13 +2,18 @@ #@Name: Atmel AT91SAM9G20EK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9g20ek development board with a at91sam9g20 processor -include conf/machine/include/at91-2.6.30.inc +include conf/machine/include/at91-2.6.38.inc -# UBOOT_MACHINE = "at91sam9g20ek_nandflash_config" -# UBOOT_MACHINE = "at91sam9g20ek_dataflash_cs0_config" +# Has linux config file in OpenEmbedded +# +# LINUX26_DEFCONFIG = "at91sam9g20ek_defconfig" + + +# Supported u-boot machines UBOOT_MACHINE = "at91sam9g20ek_dataflash_cs1_config" -# UBOOT_MACHINE = "at91sam9g20ek_config" -AT91BOOTSTRAP_BOARD = "at91sam9g20ek at91sam9g20df at91sam9g20nf" +UBOOT_MACHINES = " at91sam9g20ek_nandflash at91sam9g20ek_dataflash_cs0 at91sam9g20ek_dataflash_cs1 at91sam9g20ek_config " + +AT91BOOTSTRAP_BOARD = " at91sam9g20ek at91sam9g20df at91sam9g20nf " -MACHINE_FEATURES += "usbhost" +MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9g45ek.conf +5 -11
@@ -2,7 +2,7 @@ #@Name: Atmel AT91SAM9G45EK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9m10g45ek board with a at91sam9g45 processor -include conf/machine/include/at91-2.6.30.inc +include conf/machine/include/at91-2.6.38.inc include conf/machine/include/at91-lcd.inc # Has linux config file in OpenEmbedded
@@ -11,17 +11,11 @@ include conf/machine/include/at91-lcd.inc # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig" # Supported u-boot machines -#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config" UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_sd_config" -#UBOOT_MACHINE = "at91sam9g45ekes_nandflash_config" -#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_config" -#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_cs0_config" -#UBOOT_MACHINE = "at91sam9g45ekes_config" -AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf" +UBOOT_MACHINES = " at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash at91sam9m10g45ek_dataflash_cs0 at91sam9m10g45ek at91sam9m10g45ek_sd_config " -MACHINE_FEATURES += "usbhost" +AT91BOOTSTRAP_BOARD = " at91sam9g45df at91sam9g45ek at91sam9g45nf " + +MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9g45ekes.conf +11 -11
@@ -2,7 +2,7 @@ #@Name: Atmel AT91SAM9G45EKES Development Platform #@DESCRIPTION: Machine configuration for the at91sam9g45ekes development board with a at91sam9g45-es processor -include conf/machine/include/at91-2.6.30.inc +include conf/machine/include/at91-2.6.38.inc include conf/machine/include/at91-lcd.inc # Has linux config file in OpenEmbedded
@@ -11,17 +11,17 @@ include conf/machine/include/at91-lcd.inc # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig" # Supported u-boot machines -#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config" UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_sd_config" -#UBOOT_MACHINE = "at91sam9g45ekes_nandflash_config" -#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_config" -#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_cs0_config" -#UBOOT_MACHINE = "at91sam9g45ekes_config" -AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf" +UBOOT_MACHINES = " \ + at91sam9g45ekes_nandflash \ + at91sam9g45ekes_dataflash \ + at91sam9g45ekes_dataflash_cs0 \ + at91sam9g45ekes_sd \ + at91sam9g45ekes \ + at91sam9m10g45ek_dataflash_cs0 " -MACHINE_FEATURES += "usbhost" +AT91BOOTSTRAP_BOARD = " at91sam9g45df at91sam9g45ek at91sam9g45nf " + +MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9m10ekes.conf +4 -9
@@ -2,7 +2,7 @@ #@Name: Atmel AT91SAM9M10EKES Development Platform #@DESCRIPTION: Machine configuration for the at91sam9m10ekes board with a at91sam9m10-es2 processor -include conf/machine/include/at91-2.6.30.inc +include conf/machine/include/at91-2.6.38.inc include conf/machine/include/at91-lcd.inc # Has linux config file in OpenEmbedded
@@ -11,16 +11,11 @@ include conf/machine/include/at91-lcd.inc # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig" # Supported u-boot machines -#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_config" UBOOT_MACHINE = "at91sam9m10g45ek_sd" -#UBOOT_MACHINES = "at91sam9m10g45ek_sd at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash" -UBOOT_MACHINES = "at91sam9m10g45ek_sd at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash" +UBOOT_MACHINES = " at91sam9m10g45ek_sd at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash " -AT91BOOTSTRAP_BOARD = "at91sam9m10dfes at91sam9m10ekes at91sam9m10nfes at91sam9m10sdu" +AT91BOOTSTRAP_BOARD = " at91sam9m10dfes at91sam9m10ekes at91sam9m10nfes at91sam9m10sdu " -MACHINE_FEATURES += "usbhost" +MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9m10g45ek.conf +5 -7
@@ -2,7 +2,7 @@ #@Name: Atmel AT91SAM9M10G45EK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9m10g45ek board with a at91sam9m10 processor -include conf/machine/include/at91-2.6.30.inc +include conf/machine/include/at91-2.6.38.inc include conf/machine/include/at91-lcd.inc # Has linux config file in OpenEmbedded
@@ -11,13 +11,11 @@ include conf/machine/include/at91-lcd.inc # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig" # Supported u-boot machines -#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config" UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_config" -#UBOOT_MACHINE = "at91sam9m10g45ek_sd_config" -AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf" +UBOOT_MACHINES = " at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash at91sam9m10g45ek_dataflash_cs0 at91sam9m10g45ek at91sam9m10g45ek_sd_config " -MACHINE_FEATURES += "usbhost" +AT91BOOTSTRAP_BOARD = " at91sam9g45df at91sam9g45ek at91sam9g45nf " + +MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9rlek.conf +9 -20
@@ -2,29 +2,18 @@ #@Name: Atmel AT91SAM9RLEK Development Platform #@DESCRIPTION: Machine configuration for the at91sam9rlek development board with a at91sam9rl64 processor -TARGET_ARCH = "arm" -#PACKAGE_EXTRA_ARCHS = "armv4t armv5te" +include conf/machine/include/at91-2.6.38.inc +include conf/machine/include/at91-lcd.inc -PREFERRED_PROVIDER_virtual/kernel = "linux" -PREFERRED_VERSION_linux = "2.6.28" -PREFERRED_PROVIDER_xserver = "xserver-kdrive" +# Has linux config file in OpenEmbedded +# +# LINUX26_DEFCONFIG = "at91sam9rlek_defconfig" -KERNEL_IMAGETYPE = "uImage" -UBOOT_MACHINE = "at91sam9rlek_config" - -PREFERRED_VERSION_at91bootstrap = "2.10" -#don't try to access tty1 -USE_VT = "0" - -MACHINE_FEATURES = "kernel26 alsa ext2 usbgadget screen touchscreen" -EXTRA_IMAGEDEPENDS += "u-boot" -#EXTRA_IMAGEDEPENDS += "at91bootstrap" +# Supported u-boot machines +UBOOT_MACHINE = "at91sam9rlek_config" -# used by sysvinit_2 -SERIAL_CONSOLE = "115200 ttyS0" -IMAGE_FSTYPES ?= "jffs2" -EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" +UBOOT_MACHINES = " at91sam9rlek_nandflash at91sam9rlek_dataflash at91sam9rlek_dataflash_cs0 at91sam9rlek " -require conf/machine/include/tune-arm926ejs.inc +AT91BOOTSTRAP_BOARD = " at91sam9rldf at91sam9rlek at91sam9rlnf at91sam9rlsd "
Signature · 1 line
1.7.4.1