Skip to contentSkip to conversation

at91: Add support for linux-2.6.38

PATCH New [email protected] 1 participant 3 messages May 15, 2011 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 at91: Add support for linux-2.6.38

From: Ulf Samuelsson <[email protected]>

---
 conf/machine/include/at91-2.6.38.inc               |   39 +
 recipes/linux/linux-2.6.38/at572d940hfek/defconfig | 2044 ++
 ...Maxim-patch-updated-from-2.6.30-to-2.6.38.patch |17834 +++++++++++++
 .../0002-Add-MACB-TX-Buffer-in-SRAM-support.patch  |  214 +
 ...mci-Platform-configuration-to-the-the-atm.patch |  506 +
 ...04-at91_mci-Do-a-reset-after-each-request.patch |   37 +
 ...sam9g20ek-modify-dual-slot-evaluation-kit.patch |  105 +
 ...1-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch |   97 +
 .../0007-Bug-workaround-for-channel-in-ac97.patch  |   31 +
 ...atmel_tsadcc-report-fake-pressure-measure.patch |   47 +
 ...e-SD-MMC-Write-Protect-pin-connected-on-a.patch |   35 +
 ...dify-SRAM-location-of-descriptor-buffers-.patch |   34 +
 ...dd-pwm-support-in-Kconfig-for-at91sam9g45.patch |   29 +
 ...-I2C-definitions-for-at91sam9g20ek-boards.patch |   54 +
 ...013-at91-add-at91sam9g10ek-defconfig-file.patch | 1546 ++
 .../0014-t91-add-at91sam9m10ekes-support.patch     | 1860 ++
 ...m9m10-add-dma-touchscreen-mmc-usb-host-an.patch |   93 +
 ...-at91-at91sam9m10-add-video-decoder-clock.patch |   57 +
 ...0017-at91sam9m10-add-on2-8170-gpl-modules.patch | 1264 +
 ...atmel-ac97-add-warm-reset-if-no-reset-pin.patch |   37 +
 ...019-at91-introduce-at91sam9m10g45ek-board.patch |  121 +
 ..._tsadcc-introduce-changes-needed-for-at91.patch |  179 +
 ...91-Clean-up-choiuce-of-sam9m10-g45-boards.patch |   74 +
 ...pport-for-configurable-NAND-flash-partiti.patch |  447 +
 ...-Update-defconfig-s-for-atmel-at91-boards.patch |27031 ++++++++++++++++++++
 .../at91/0024-at91-Cleanup-of-defconfig-s.patch    | 6099 +++++
 recipes/linux/linux-2.6.38/at91cap9adk/defconfig   | 1656 ++
 recipes/linux/linux-2.6.38/at91cap9stk/defconfig   | 1656 ++
 recipes/linux/linux-2.6.38/at91rm9200/defconfig    | 2197 ++
 recipes/linux/linux-2.6.38/at91rm9200dk/defconfig  | 1621 ++
 recipes/linux/linux-2.6.38/at91rm9200ek/defconfig  | 1632 ++
 recipes/linux/linux-2.6.38/at91sam9260ek/defconfig | 1800 ++
 recipes/linux/linux-2.6.38/at91sam9261ek/defconfig | 1836 ++
 recipes/linux/linux-2.6.38/at91sam9263ek/defconfig | 1846 ++
 recipes/linux/linux-2.6.38/at91sam9g10ek/defconfig | 1700 ++
 recipes/linux/linux-2.6.38/at91sam9g20ek/defconfig | 1785 ++
 .../linux-2.6.38/at91sam9g20ek_2mmc/defconfig      | 1774 ++
 .../linux/linux-2.6.38/at91sam9g45ekes/defconfig   | 1831 ++
 .../linux/linux-2.6.38/at91sam9m10ekes/defconfig   | 1829 ++
 .../linux/linux-2.6.38/at91sam9m10g45ek/defconfig  | 1829 ++
 recipes/linux/linux-2.6.38/at91sam9rlek/defconfig  | 1672 ++
 recipes/linux/linux-2.6.38/at91sam9xeek/defconfig  | 1677 ++
 42 files changed, 88255 insertions(+), 0 deletions(-)
 create mode 100644 conf/machine/include/at91-2.6.38.inc
 create mode 100644 recipes/linux/linux-2.6.38/at572d940hfek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91/0001-Maxim-patch-updated-from-2.6.30-to-2.6.38.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0002-Add-MACB-TX-Buffer-in-SRAM-support.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0003-AT91-atmel-mci-Platform-configuration-to-the-the-atm.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0004-at91_mci-Do-a-reset-after-each-request.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0005-at91-at91sam9g20ek-modify-dual-slot-evaluation-kit.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0006-at91-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0007-Bug-workaround-for-channel-in-ac97.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0008-input-atmel_tsadcc-report-fake-pressure-measure.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0009-at91-No-more-SD-MMC-Write-Protect-pin-connected-on-a.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0010-net-macb-modify-SRAM-location-of-descriptor-buffers-.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0011-at91-add-pwm-support-in-Kconfig-for-at91sam9g45.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0012-at91-add-I2C-definitions-for-at91sam9g20ek-boards.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0013-at91-add-at91sam9g10ek-defconfig-file.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0014-t91-add-at91sam9m10ekes-support.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0015-at91-at91sam9m10-add-dma-touchscreen-mmc-usb-host-an.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0016-at91-at91sam9m10-add-video-decoder-clock.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0017-at91sam9m10-add-on2-8170-gpl-modules.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0018-sound-atmel-ac97-add-warm-reset-if-no-reset-pin.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0019-at91-introduce-at91sam9m10g45ek-board.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0020-input-atmel_tsadcc-introduce-changes-needed-for-at91.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0021-at91-Clean-up-choiuce-of-sam9m10-g45-boards.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0022-at91-Add-support-for-configurable-NAND-flash-partiti.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0023-at91-Update-defconfig-s-for-atmel-at91-boards.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91/0024-at91-Cleanup-of-defconfig-s.patch
 create mode 100644 recipes/linux/linux-2.6.38/at91cap9adk/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91cap9stk/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91rm9200/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91rm9200dk/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91rm9200ek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9260ek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9261ek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9263ek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9g10ek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9g20ek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9g20ek_2mmc/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9g45ekes/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9m10ekes/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9m10g45ek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9rlek/defconfig
 create mode 100644 recipes/linux/linux-2.6.38/at91sam9xeek/defconfig
conf/machine/include/at91-2.6.38.inc new file +39 -0
new file mode 100644
index 0000000..3ea42a1
@@ -0,0 +1,39 @@
+# Common description for Atmel ARM processors
+
+TARGET_ARCH = "arm"
+#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+SOC_FAMILY = "at91"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux = "2.6.38"
+
+PREFERRED_PROVIDER_at91bootstrap = "at91bootstrap"
+PREFERRED_VERSION_at91bootstrap = "3.0"
+
+PREFERRED_PROVIDER_u-boot = "u-boot"
+PREFERRED_VERSION_u-boot = "2009.11"
+
+KERNEL_IMAGETYPE = "uImage"
+
+#don't try to access tty1
+USE_VT = "0"
+
+MACHINE_FEATURES = " kernel26 alsa ext2 usbgadget vfat uboot "
+EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "at91bootstrap"
+
+MACHINE_EXTRA_RDEPENDS += " kernel-modules "
+#MACHINE_EXTRA_RDEPENDS += " atmel-fixes "
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES ?= "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+#
+# Uncomment or add kernel modules that should be autoloaded
+#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget',  'g_file_storage', '',d)}
+#module_autoload_g_ether        = ${@base_contains('MACHINE_FEATURES', 'usbgadget',  'g_ether', '',d)}
+module_autoload_g_serial       = ${@base_contains('MACHINE_FEATURES', 'usbgadget',  'g_serial', '',d)}
+
+require conf/machine/include/tune-arm926ejs.inc
+
recipes/linux/linux-2.6.38/at572d940hfek/defconfig new file +2044 -0

2,044 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0001-Maxim-patch-updated-from-2.6.30-to-2.6.38.patch new file +17834 -0

917 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0002-Add-MACB-TX-Buffer-in-SRAM-support.patch new file +214 -0

214 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0003-AT91-atmel-mci-Platform-configuration-to-the-the-atm.patch new file +506 -0

506 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0004-at91_mci-Do-a-reset-after-each-request.patch new file +37 -0
new file mode 100644
index 0000000..4e90bbd

Lines of this file are not shown. View the raw message.

recipes/linux/linux-2.6.38/at91/0005-at91-at91sam9g20ek-modify-dual-slot-evaluation-kit.patch new file +105 -0

105 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0006-at91-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch new file +97 -0

97 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0007-Bug-workaround-for-channel-in-ac97.patch new file +31 -0
new file mode 100644
index 0000000..6e3f0d7

Lines of this file are not shown. View the raw message.

recipes/linux/linux-2.6.38/at91/0008-input-atmel_tsadcc-report-fake-pressure-measure.patch new file +47 -0

47 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0009-at91-No-more-SD-MMC-Write-Protect-pin-connected-on-a.patch new file +35 -0
new file mode 100644
index 0000000..bfe336c

Lines of this file are not shown. View the raw message.

recipes/linux/linux-2.6.38/at91/0010-net-macb-modify-SRAM-location-of-descriptor-buffers-.patch new file +34 -0
new file mode 100644
index 0000000..b5627ce

Lines of this file are not shown. View the raw message.

recipes/linux/linux-2.6.38/at91/0011-at91-add-pwm-support-in-Kconfig-for-at91sam9g45.patch new file +29 -0
new file mode 100644
index 0000000..9295093

Lines of this file are not shown. View the raw message.

recipes/linux/linux-2.6.38/at91/0012-at91-add-I2C-definitions-for-at91sam9g20ek-boards.patch new file +54 -0

54 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0013-at91-add-at91sam9g10ek-defconfig-file.patch new file +1546 -0

1,546 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0014-t91-add-at91sam9m10ekes-support.patch new file +1860 -0

1,860 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0015-at91-at91sam9m10-add-dma-touchscreen-mmc-usb-host-an.patch new file +93 -0

93 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0016-at91-at91sam9m10-add-video-decoder-clock.patch new file +57 -0

57 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0017-at91sam9m10-add-on2-8170-gpl-modules.patch new file +1264 -0

1,264 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0018-sound-atmel-ac97-add-warm-reset-if-no-reset-pin.patch new file +37 -0
new file mode 100644
index 0000000..001ddd5

Lines of this file are not shown. View the raw message.

recipes/linux/linux-2.6.38/at91/0019-at91-introduce-at91sam9m10g45ek-board.patch new file +121 -0

121 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0020-input-atmel_tsadcc-introduce-changes-needed-for-at91.patch new file +179 -0

179 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0021-at91-Clean-up-choiuce-of-sam9m10-g45-boards.patch new file +74 -0

74 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0022-at91-Add-support-for-configurable-NAND-flash-partiti.patch new file +447 -0

447 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0023-at91-Update-defconfig-s-for-atmel-at91-boards.patch new file +27031 -0

27,031 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91/0024-at91-Cleanup-of-defconfig-s.patch new file +6099 -0

6,099 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91cap9adk/defconfig new file +1656 -0

1,656 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91cap9stk/defconfig new file +1656 -0

1,656 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91rm9200/defconfig new file +2197 -0

2,197 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91rm9200dk/defconfig new file +1621 -0

1,621 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91rm9200ek/defconfig new file +1632 -0

1,632 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9260ek/defconfig new file +1800 -0

1,800 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9261ek/defconfig new file +1836 -0

1,836 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9263ek/defconfig new file +1846 -0

1,846 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9g10ek/defconfig new file +1700 -0

1,700 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9g20ek/defconfig new file +1785 -0

1,785 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9g20ek_2mmc/defconfig new file +1774 -0

1,774 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9g45ekes/defconfig new file +1831 -0

1,831 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9m10ekes/defconfig new file +1829 -0

1,829 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9m10g45ek/defconfig new file +1829 -0

1,829 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9rlek/defconfig new file +1672 -0

1,672 lines not on this page · raw message

recipes/linux/linux-2.6.38/at91sam9xeek/defconfig new file +1677 -0

1,677 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.7.4.1

Part of the diff is not shown here. View the raw message.

#1 lore raw

PATCH 2/3 Add at91 support for linux-2.6.38

From: Ulf Samuelsson <[email protected]>

---
 recipes/linux/linux_2.6.38.bb |   45 ++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 44 insertions(+), 1 deletions(-)
recipes/linux/linux_2.6.38.bb +44 -1
index 186f987..8c551bd 100644
@@ -1,6 +1,6 @@
 require linux.inc
 
-PR = "r3"
+PR = "r4"
 
 # Mark archs/machines that this kernel supports
 DEFAULT_PREFERENCE = "-1"
@@ -12,11 +12,54 @@ DEFAULT_PREFERENCE_poodle = "1"
 DEFAULT_PREFERENCE_spitz = "1"
 DEFAULT_PREFERENCE_tosa = "1"
 DEFAULT_PREFERENCE_ts72xx = "1"
+DEFAULT_PREFERENCE_at572d940hfek = "4"
+DEFAULT_PREFERENCE_at91cap9adk = "4"
+DEFAULT_PREFERENCE_at91rm9200 = "4"
+DEFAULT_PREFERENCE_at91rm9200dk = "4"
+DEFAULT_PREFERENCE_at91rm9200ek = "4"
+DEFAULT_PREFERENCE_at91sam9260ek = "4"
+DEFAULT_PREFERENCE_at91sam9261ek = "4"
+DEFAULT_PREFERENCE_at91sam9263ek = "4"
+DEFAULT_PREFERENCE_at91sam9g10ek = "4"
+DEFAULT_PREFERENCE_at91sam9g20ek = "4"
+DEFAULT_PREFERENCE_at91sam9g20ek_2mmc = "4"
+DEFAULT_PREFERENCE_at91sam9g45ekes = "4"
+DEFAULT_PREFERENCE_at91sam9m10ekes = "4"
+DEFAULT_PREFERENCE_at91sam9m10g45ek = "4"
+DEFAULT_PREFERENCE_at91sam9rlek = "4"
+DEFAULT_PREFERENCE_at91sam9xeek = "4"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
            ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.4.bz2;apply=yes;name=stablepatch \
            file://defconfig "
 
+SRC_URI_at91 = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
+	file://0001-Maxim-patch-updated-from-2.6.30-to-2.6.38.patch;apply=yes \
+	file://0002-Add-MACB-TX-Buffer-in-SRAM-support.patch;apply=yes \
+	file://0003-AT91-atmel-mci-Platform-configuration-to-the-the-atm.patch;apply=yes \
+	file://0004-at91_mci-Do-a-reset-after-each-request.patch;apply=yes \
+	file://0005-at91-at91sam9g20ek-modify-dual-slot-evaluation-kit.patch;apply=yes \
+	file://0006-at91-add-gpio-buttons-to-at91sam9g20-ek-2mmc.patch;apply=yes \
+	file://0007-Bug-workaround-for-channel-in-ac97.patch;apply=yes \
+	file://0008-input-atmel_tsadcc-report-fake-pressure-measure.patch;apply=yes \
+	file://0009-at91-No-more-SD-MMC-Write-Protect-pin-connected-on-a.patch;apply=yes \
+	file://0010-net-macb-modify-SRAM-location-of-descriptor-buffers-.patch;apply=yes \
+	file://0011-at91-add-pwm-support-in-Kconfig-for-at91sam9g45.patch;apply=yes \
+	file://0012-at91-add-I2C-definitions-for-at91sam9g20ek-boards.patch;apply=yes \
+	file://0013-at91-add-at91sam9g10ek-defconfig-file.patch;apply=yes \
+	file://0014-t91-add-at91sam9m10ekes-support.patch;apply=yes \
+	file://0015-at91-at91sam9m10-add-dma-touchscreen-mmc-usb-host-an.patch;apply=yes \
+	file://0016-at91-at91sam9m10-add-video-decoder-clock.patch;apply=yes \
+	file://0017-at91sam9m10-add-on2-8170-gpl-modules.patch;apply=yes \
+	file://0018-sound-atmel-ac97-add-warm-reset-if-no-reset-pin.patch;apply=yes \
+	file://0019-at91-introduce-at91sam9m10g45ek-board.patch;apply=yes \
+	file://0020-input-atmel_tsadcc-introduce-changes-needed-for-at91.patch;apply=yes \
+	file://0021-at91-Clean-up-choiuce-of-sam9m10-g45-boards.patch;apply=yes \
+	file://0022-at91-Add-support-for-configurable-NAND-flash-partiti.patch;apply=yes \
+	file://0023-at91-Update-defconfig-s-for-atmel-at91-boards.patch;apply=yes \
+	file://0024-at91-Cleanup-of-defconfig-s.patch;apply=yes \
+	file://defconfig "
+
 SRC_URI_append_akita = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 "
 SRC_URI_append_c7x0 = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 "
 SRC_URI_append_collie = " file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 "
Signature · 1 line
1.7.4.1
#2 lore raw

PATCH 3/3 at91: use linux-2.6.38

In reply to [email protected]

From: Ulf Samuelsson <[email protected]>

---
 conf/machine/at91cap9adk.conf      |   28 ++++++++++------------------
 conf/machine/at91sam9260ek.conf    |   26 +++++++++-----------------
 conf/machine/at91sam9261ek.conf    |   28 +++++++++++-----------------
 conf/machine/at91sam9263ek.conf    |   33 +++++++++++++++------------------
 conf/machine/at91sam9g10ek.conf    |   15 ++++++++++++---
 conf/machine/at91sam9g20ek.conf    |   17 +++++++++++------
 conf/machine/at91sam9g45ek.conf    |   16 +++++-----------
 conf/machine/at91sam9g45ekes.conf  |   22 +++++++++++-----------
 conf/machine/at91sam9m10ekes.conf  |   13 ++++---------
 conf/machine/at91sam9m10g45ek.conf |   12 +++++-------
 conf/machine/at91sam9rlek.conf     |   29 +++++++++--------------------
 11 files changed, 102 insertions(+), 137 deletions(-)
conf/machine/at91cap9adk.conf +10 -18
index 87311e9..077a84e 100644
@@ -2,27 +2,19 @@
 #@Name: Atmel AT91CAP9ADK Development Platform
 #@DESCRIPTION: Machine configuration for the at91cap9adk development board with a at91cap9500 processor
 
-TARGET_ARCH = "arm"
+include conf/machine/include/at91-2.6.38.inc
+include conf/machine/include/at91-lcd.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+# Has linux config file in OpenEmbedded
+# 
+# LINUX26_DEFCONFIG = "at91cap9adk_defconfig"
 
-KERNEL_IMAGETYPE = "uImage"
-UBOOT_MACHINE = "at91cap9adk_config"
-
-PREFERRED_VERSION_at91bootstrap = "2.10"
 
-#don't try to access tty1
-USE_VT = "0"
+# Supported u-boot machines
+UBOOT_MACHINE = "at91cap9adk_config"
+UBOOT_MACHINES = " at91cap9adk "
 
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-#EXTRA_IMAGEDEPENDS += "at91bootstrap"
+AT91BOOTSTRAP_BOARD = " at91cap9adk "
 
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+MACHINE_FEATURES += " usbhost "
 
-require conf/machine/include/tune-arm926ejs.inc
conf/machine/at91sam9260ek.conf +9 -17
index 3fdfce4..8df5e04 100644
@@ -2,27 +2,19 @@
 #@Name: Atmel AT91SAM9260EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9260ek development board with a at91sam9260 processor
 
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+include conf/machine/include/at91-2.6.38.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
 
-KERNEL_IMAGETYPE = "uImage"
-UBOOT_MACHINE = "at91sam9260ek_config"
+# Has linux config file in OpenEmbedded
+# 
+# LINUX26_DEFCONFIG = "at91sam9260ek_defconfig"
 
-PREFERRED_VERSION_at91bootstrap = "2.10"
 
-#don't try to access tty1
-USE_VT = "0"
+# Supported u-boot machines
+UBOOT_MACHINE = "at91sam9260ek_dataflash_cs1_config"
 
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
+UBOOT_MACHINES = " at91sam9260ek_nandflash at91sam9260ek_dataflash_cs0 at91sam9260ek_dataflash_cs1 at91sam9260ek "
 
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+AT91BOOTSTRAP_BOARD = " at91sam9260ek at91sam9260df at91sam9260dfc at91sam9260nf "
 
-require conf/machine/include/tune-arm926ejs.inc
+MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9261ek.conf +11 -17
index 79f275f..4fff389 100644
@@ -2,28 +2,22 @@
 #@Name: Atmel AT91SAM9261EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9261ek development board with a at91sam9261 processor
 
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+include conf/machine/include/at91-2.6.38.inc
+include conf/machine/include/at91-lcd.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+# Has linux config file in OpenEmbedded
+# 
+# LINUX26_DEFCONFIG = "at91sam9261ek_defconfig"
 
-KERNEL_IMAGETYPE = "uImage"
+
+# Supported u-boot machines
 UBOOT_MACHINE = "at91sam9261ek_config"
 
-PREFERRED_VERSION_at91bootstrap = "2.10"
+UBOOT_MACHINES = " at91sam9261ek_nandflash at91sam9261ek_dataflash_cs0 at91sam9261ek_dataflash_cs3  at91sam9261ek_config "
+
+AT91BOOTSTRAP_BOARD = " at91sam9261df at91sam9261dfc at91sam9261ek at91sam9261nf "
 
-#don't try to access tty1
-USE_VT = "0"
+MACHINE_FEATURES += " usbhost "
 
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
 
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
 
-require conf/machine/include/tune-arm926ejs.inc
conf/machine/at91sam9263ek.conf +15 -18
index f052170..e18bfbe 100644
@@ -2,29 +2,26 @@
 #@Name: Atmel AT91SAM9263EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9263ek development board with a at91sam9263 processor
 
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+include conf/machine/include/at91-2.6.38.inc
+include conf/machine/include/at91-lcd.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+# Has linux config file in OpenEmbedded
+# 
+# LINUX26_DEFCONFIG = "at91sam9263ek_defconfig"
 
-KERNEL_IMAGETYPE = "uImage"
-UBOOT_MACHINE = "at91sam9263ek_config"
 
-PREFERRED_VERSION_at91bootstrap = "2.10"
+# Supported u-boot machines
+UBOOT_MACHINE = "at91sam9263ek_config"
 
-#don't try to access tty1
-USE_VT = "0"
+UBOOT_MACHINES = " \
+	at91sam9263ek_norflash_config \
+	at91sam9263ek_norflash_boot_config \
+	at91sam9263ek_nandflash \
+	at91sam9263ek_dataflash at91sam9263ek_dataflash_cs0 \
+	at91sam9263ek_config "
 
-MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-EXTRA_IMAGEDEPENDS += "at91bootstrap"
+AT91BOOTSTRAP_BOARD = " at91sam9263df at91sam9263dfc at91sam9263ek at91sam9263nf "
 
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+MACHINE_FEATURES += " usbhost "
 
-require conf/machine/include/tune-arm926ejs.inc
 
conf/machine/at91sam9g10ek.conf +12 -3
index 82775b6..dbe082d 100644
@@ -2,11 +2,20 @@
 #@Name: Atmel AT91SAM9G10EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9g10ek development board with a at91sam9g10 processor
 
-include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-2.6.38.inc
 include conf/machine/include/at91-lcd.inc
 
+# Has linux config file in OpenEmbedded
+# 
+# LINUX26_DEFCONFIG = "at91sam9g20ek_defconfig"
+
+
+# Supported u-boot machines
 UBOOT_MACHINE = "at91sam9g10ek_dataflash_cs0_config"
-AT91BOOTSTRAP_BOARD = "at91sam9g10ek at91sam9g10df at91sam9g10nf"
 
-MACHINE_FEATURES += "usbhost"
+UBOOT_MACHINES = " at91sam9g10ek_nandflash at91sam9g10ek_dataflash_cs0 at91sam9g10ek_dataflash_cs3 at91sam9g10ek "
+
+AT91BOOTSTRAP_BOARD = " at91sam9g10ek at91sam9g10df at91sam9g10nf "
+
+MACHINE_FEATURES += " usbhost "
 
conf/machine/at91sam9g20ek.conf +11 -6
index f63d75e..4f2d06f 100644
@@ -2,13 +2,18 @@
 #@Name: Atmel AT91SAM9G20EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9g20ek development board with a at91sam9g20 processor
 
-include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-2.6.38.inc
 
-# UBOOT_MACHINE = "at91sam9g20ek_nandflash_config"
-# UBOOT_MACHINE = "at91sam9g20ek_dataflash_cs0_config"
+# Has linux config file in OpenEmbedded
+# 
+# LINUX26_DEFCONFIG = "at91sam9g20ek_defconfig"
+
+
+# Supported u-boot machines
 UBOOT_MACHINE = "at91sam9g20ek_dataflash_cs1_config"
-# UBOOT_MACHINE = "at91sam9g20ek_config"
 
-AT91BOOTSTRAP_BOARD = "at91sam9g20ek at91sam9g20df at91sam9g20nf"
+UBOOT_MACHINES = " at91sam9g20ek_nandflash at91sam9g20ek_dataflash_cs0 at91sam9g20ek_dataflash_cs1  at91sam9g20ek_config "
+
+AT91BOOTSTRAP_BOARD = " at91sam9g20ek at91sam9g20df at91sam9g20nf "
 
-MACHINE_FEATURES += "usbhost"
+MACHINE_FEATURES += " usbhost "
conf/machine/at91sam9g45ek.conf +5 -11
index 46ed8ad..d19798c 100644
@@ -2,7 +2,7 @@
 #@Name: Atmel AT91SAM9G45EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9m10g45ek board with a at91sam9g45 processor
 
-include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-2.6.38.inc
 include conf/machine/include/at91-lcd.inc
 
 # Has linux config file in OpenEmbedded
@@ -11,17 +11,11 @@ include conf/machine/include/at91-lcd.inc
 # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
 
 # Supported u-boot machines
-#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config"
 UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_sd_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_nandflash_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_cs0_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_config"
 
-AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf"
+UBOOT_MACHINES = " at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash at91sam9m10g45ek_dataflash_cs0 at91sam9m10g45ek at91sam9m10g45ek_sd_config "
 
-MACHINE_FEATURES += "usbhost"
+AT91BOOTSTRAP_BOARD = " at91sam9g45df at91sam9g45ek at91sam9g45nf "
+
+MACHINE_FEATURES += " usbhost "
 
conf/machine/at91sam9g45ekes.conf +11 -11
index 6120987..564f0d8 100644
@@ -2,7 +2,7 @@
 #@Name: Atmel AT91SAM9G45EKES Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9g45ekes development board with a at91sam9g45-es processor
 
-include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-2.6.38.inc
 include conf/machine/include/at91-lcd.inc
 
 # Has linux config file in OpenEmbedded
@@ -11,17 +11,17 @@ include conf/machine/include/at91-lcd.inc
 # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
 
 # Supported u-boot machines
-#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config"
 UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_sd_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_nandflash_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_dataflash_cs0_config"
-#UBOOT_MACHINE = "at91sam9g45ekes_config"
 
-AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf"
+UBOOT_MACHINES = " \
+	at91sam9g45ekes_nandflash \
+	at91sam9g45ekes_dataflash \
+	at91sam9g45ekes_dataflash_cs0 \
+	at91sam9g45ekes_sd \
+	at91sam9g45ekes \
+	at91sam9m10g45ek_dataflash_cs0 "
 
-MACHINE_FEATURES += "usbhost"
+AT91BOOTSTRAP_BOARD = " at91sam9g45df at91sam9g45ek at91sam9g45nf "
+
+MACHINE_FEATURES += " usbhost "
 
conf/machine/at91sam9m10ekes.conf +4 -9
index 9b00e64..b43423e 100644
@@ -2,7 +2,7 @@
 #@Name: Atmel AT91SAM9M10EKES Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9m10ekes board with a at91sam9m10-es2 processor
 
-include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-2.6.38.inc
 include conf/machine/include/at91-lcd.inc
 
 # Has linux config file in OpenEmbedded
@@ -11,16 +11,11 @@ include conf/machine/include/at91-lcd.inc
 # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
 
 # Supported u-boot machines
-#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_config"
 UBOOT_MACHINE = "at91sam9m10g45ek_sd"
 
-#UBOOT_MACHINES = "at91sam9m10g45ek_sd at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash"
-UBOOT_MACHINES = "at91sam9m10g45ek_sd at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash"
+UBOOT_MACHINES = " at91sam9m10g45ek_sd at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash "
 
-AT91BOOTSTRAP_BOARD = "at91sam9m10dfes at91sam9m10ekes at91sam9m10nfes at91sam9m10sdu"
+AT91BOOTSTRAP_BOARD = " at91sam9m10dfes at91sam9m10ekes at91sam9m10nfes at91sam9m10sdu "
 
-MACHINE_FEATURES += "usbhost"
+MACHINE_FEATURES += " usbhost "
 
conf/machine/at91sam9m10g45ek.conf +5 -7
index 979d58a..5f765fc 100644
@@ -2,7 +2,7 @@
 #@Name: Atmel AT91SAM9M10G45EK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9m10g45ek board with a at91sam9m10 processor
 
-include conf/machine/include/at91-2.6.30.inc
+include conf/machine/include/at91-2.6.38.inc
 include conf/machine/include/at91-lcd.inc
 
 # Has linux config file in OpenEmbedded
@@ -11,13 +11,11 @@ include conf/machine/include/at91-lcd.inc
 # LINUX26_DEFCONFIG = "at91sam9m10g45ek_defconfig"
 
 # Supported u-boot machines
-#UBOOT_MACHINE = "at91sam9m10g45ek_nandflash_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_config"
 UBOOT_MACHINE = "at91sam9m10g45ek_dataflash_cs0_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_config"
-#UBOOT_MACHINE = "at91sam9m10g45ek_sd_config"
 
-AT91BOOTSTRAP_BOARD = "at91sam9g45df at91sam9g45ek at91sam9g45nf"
+UBOOT_MACHINES = " at91sam9m10g45ek_nandflash at91sam9m10g45ek_dataflash at91sam9m10g45ek_dataflash_cs0 at91sam9m10g45ek at91sam9m10g45ek_sd_config "
 
-MACHINE_FEATURES += "usbhost"
+AT91BOOTSTRAP_BOARD = " at91sam9g45df at91sam9g45ek at91sam9g45nf "
+
+MACHINE_FEATURES += " usbhost "
 
conf/machine/at91sam9rlek.conf +9 -20
index de26926..57a6797 100644
@@ -2,29 +2,18 @@
 #@Name: Atmel AT91SAM9RLEK Development Platform
 #@DESCRIPTION: Machine configuration for the at91sam9rlek development board with a at91sam9rl64 processor
 
-TARGET_ARCH = "arm"
-#PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+include conf/machine/include/at91-2.6.38.inc
+include conf/machine/include/at91-lcd.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux = "2.6.28"
-PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+# Has linux config file in OpenEmbedded
+# 
+# LINUX26_DEFCONFIG = "at91sam9rlek_defconfig"
 
-KERNEL_IMAGETYPE = "uImage"
-UBOOT_MACHINE = "at91sam9rlek_config"
-
-PREFERRED_VERSION_at91bootstrap = "2.10"
 
-#don't try to access tty1
-USE_VT = "0"
-
-MACHINE_FEATURES = "kernel26 alsa ext2 usbgadget screen touchscreen"
-EXTRA_IMAGEDEPENDS += "u-boot"
-#EXTRA_IMAGEDEPENDS += "at91bootstrap"
+# Supported u-boot machines
+UBOOT_MACHINE = "at91sam9rlek_config"
 
-# used by sysvinit_2
-SERIAL_CONSOLE = "115200 ttyS0"
-IMAGE_FSTYPES ?= "jffs2"
-EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+UBOOT_MACHINES = " at91sam9rlek_nandflash at91sam9rlek_dataflash at91sam9rlek_dataflash_cs0 at91sam9rlek "
 
-require conf/machine/include/tune-arm926ejs.inc
+AT91BOOTSTRAP_BOARD = " at91sam9rldf at91sam9rlek at91sam9rlnf at91sam9rlsd "
 
Signature · 1 line
1.7.4.1