Skip to contentSkip to conversation

ARM: mach-moxart: add MOXA ART SoC files

PATCH Superseded Jonas Jensen 1 participant 4 messages Jun 17, 2013 – Jun 18, 2013

Subsystems (4)

v2 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/3 ARM: mach-moxart: add MOXA ART SoC files

Add MOXA ART SoC support.
The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit 192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX). Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.

---
 arch/arm/Kconfig                           |    2 +
 arch/arm/Makefile                          |    1 +
 arch/arm/configs/moxart_uc7112lx_defconfig |  111 ++++++++++++++++++++++++++++
 arch/arm/mach-moxart/Kconfig               |   28 +++++++
 arch/arm/mach-moxart/Makefile              |    3 +
 arch/arm/mach-moxart/moxart.c              |   33 ++++++++
 6 files changed, 178 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/configs/moxart_uc7112lx_defconfig
 create mode 100644 arch/arm/mach-moxart/Kconfig
 create mode 100644 arch/arm/mach-moxart/Makefile
 create mode 100644 arch/arm/mach-moxart/moxart.c
arch/arm/Kconfig +2 -0
index 94f08af..f91fbbf 100644
@@ -938,6 +938,8 @@ source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-moxart/Kconfig"
+
 source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
arch/arm/Makefile +1 -0
index 3380c4f..eb8f48e 100644
@@ -148,6 +148,7 @@ machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
+machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
 machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
arch/arm/configs/moxart_uc7112lx_defconfig new file +111 -0

111 lines not on this page · raw message

arch/arm/mach-moxart/Kconfig new file +28 -0
new file mode 100644
index 0000000..8879053
@@ -0,0 +1,28 @@
+config ARCH_MOXART
+	bool "MOXA ART SoC" if ARCH_MULTI_V4
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select USE_OF
+	select CLKSRC_OF
+	select HAVE_CLK
+	select COMMON_CLK
+	select GENERIC_IRQ_CHIP
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	default y
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
arch/arm/mach-moxart/Makefile new file +3 -0
new file mode 100644
index 0000000..fa022eb
@@ -0,0 +1,3 @@
+# Object file lists.
+
+obj-$(CONFIG_MACH_UC7112LX)	+= moxart.o
arch/arm/mach-moxart/moxart.c new file +33 -0
new file mode 100644
index 0000000..660d53a
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-moxart/moxart.c
+ *
+ * (C) Copyright 2013, Jonas Jensen <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach/arch.h>
+
+static const char * const moxart_dt_compat[] = {
+	"moxa,moxart",
+	NULL,
+};
+
+DT_MACHINE_START(MOXART, "MOXA UC-7112-LX")
+	.dt_compat		= moxart_dt_compat,
+MACHINE_END
Signature · 1 line
1.7.2.5
#1 lore raw

PATCH v2 2/3 ARM: mach-moxart: add MOXA ART device tree files

Add generic SoC include and UC-7112-LX platform device tree files. Add device tree bindings documentation.

---
 Documentation/devicetree/bindings/arm/moxart.txt   |    8 +++
 .../arm/moxart/moxart-interrupt-controller.txt     |   29 +++++++++
 .../bindings/arm/moxart/moxart-timer.txt           |   17 ++++++
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/moxart-uc7112lx.dts              |   61 ++++++++++++++++++++
 arch/arm/boot/dts/moxart.dtsi                      |   60 +++++++++++++++++++
 6 files changed, 176 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/moxart.txt
 create mode 100644 Documentation/devicetree/bindings/arm/moxart/moxart-interrupt-controller.txt
 create mode 100644 Documentation/devicetree/bindings/arm/moxart/moxart-timer.txt
 create mode 100644 arch/arm/boot/dts/moxart-uc7112lx.dts
 create mode 100644 arch/arm/boot/dts/moxart.dtsi
Documentation/devicetree/bindings/arm/moxart.txt new file +8 -0
new file mode 100644
index 0000000..a13b567
@@ -0,0 +1,8 @@
+MOXA ART device tree bindings
+-------------------------------------------
+
+Boards with the MOXA ART SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "moxa,moxart";
Documentation/devicetree/bindings/arm/moxart/moxart-interrupt-controller.txt new file +29 -0
new file mode 100644
index 0000000..5e3b62d
@@ -0,0 +1,29 @@
+* MOXA ART Interrupt Controller
+
+MOXA ART Interrupt Controller (moxart-interrupt-controller) is used on
+MOXA ART SoCs and supports 32 non-configurable number of interrupts
+
+Main node required properties:
+
+- compatible : should be:
+	"moxa,moxart-interrupt-controller"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The type shall be a <u32> and the value shall be 2.
+
+  The first cell contains the interrupt number in the range [0-31].
+  The second cell contains the interrupt type
+- reg: physical base address and size of the intc registers map.
+- interrupt-mask: Specifies if the interrupt is edge or level-triggered
+  each bit represent an interrupt 0-31 where 1 signify edge
+
+Example:
+
+	intc: interrupt-controller at 98800000 {
+		compatible = "moxa,moxart-interrupt-controller";
+		reg = <0x98800000 0x38>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-mask = <0x00080000>;
+	};
+
Documentation/devicetree/bindings/arm/moxart/moxart-timer.txt new file +17 -0
new file mode 100644
index 0000000..dd4e06d
@@ -0,0 +1,17 @@
+MOXA ART timer
+-----------------------------------------------------
+This timer is used on MOXA ART SoCs:
+
+Required properties:
+- compatible : "moxa,moxart-timer"
+- reg : Register range for the timer
+- interrupts : interrupt for the timer
+
+Example:
+
+	timer: timer at 98400000 {
+		compatible = "moxa,moxart-timer";
+		reg = <0x98400000 0x10>;
+		interrupts = <19 1>;
+	};
+
arch/arm/boot/dts/Makefile +1 -0
index c130447..8bcbc7b 100644
@@ -219,6 +219,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
+dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
 
 targets += dtbs
 targets += $(dtb-y)
arch/arm/boot/dts/moxart-uc7112lx.dts new file +61 -0

61 lines not on this page · raw message

arch/arm/boot/dts/moxart.dtsi new file +60 -0

60 lines not on this page · raw message

Signature · 1 line
1.7.2.5
#2 lore raw

PATCH v2 3/3 ARM: mach-moxart: add MOXA ART UART debug files

In reply to Jonas Jensen

Add MOXA ART kernel low-level debugging port support.

---
 arch/arm/Kconfig.debug          |    8 ++++++++
 arch/arm/include/debug/moxart.S |   16 ++++++++++++++++
 2 files changed, 24 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/include/debug/moxart.S
arch/arm/Kconfig.debug +8 -0
index e6a6ab1..d1ed6e5 100644
@@ -447,6 +447,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A1X based platforms on the UART1.
 
+    config DEBUG_MOXART_UART0
+        bool "Kernel low-level debugging messages via MOXART UART0"
+        depends on ARCH_MOXART
+        help
+          Say Y here if you want kernel low-level debugging support
+          on MOXART based platforms on the UART0.
+
 	config DEBUG_TEGRA_UART
 		depends on ARCH_TEGRA
 		bool "Use Tegra UART for low-level debug"
@@ -668,6 +675,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
+	default "debug/moxart.S" if DEBUG_MOXART_UART0
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
arch/arm/include/debug/moxart.S new file +16 -0
new file mode 100644
index 0000000..7ac7c76
@@ -0,0 +1,16 @@
+/* Copyright (C) 2013 Jonas Jensen <[email protected]>
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License,
+ * or (at your option) any later version. */
+
+#define MOXART_UART_DEBUG_PHYS_BASE		0x98200000
+#define MOXART_UART_DEBUG_VIRT_BASE		0xf9820000
+
+.macro	addruart, rp, rv, tmp
+	ldr	\rp, =MOXART_UART_DEBUG_PHYS_BASE
+	ldr \rv, =MOXART_UART_DEBUG_VIRT_BASE
+.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
Signature · 1 line
1.7.2.5