Skip to contentSkip to conversation

ASoC: fsl: Add S/PDIF machine driver

PATCH Applied Nicolin Chen 3 participants 3 messages Aug 28, 2013 – Aug 29, 2013

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH v12 1/1 ASoC: fsl: Add S/PDIF machine driver

This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and fsl_spdif.c drivers.

---
Changelog
v11->v12:
* Dropped unused spdif_pdev.
* Register spdif-dit/dir depending on DT bool property.
v10->v11:
* Use boolean properties for spdif-out/in switch instead of codec phandles.
* Accordingly create dummy codec driver in probe() instead of DT nodes.

 .../devicetree/bindings/sound/imx-audio-spdif.txt  |   34 +++++
 sound/soc/fsl/Kconfig                              |   11 ++
 sound/soc/fsl/Makefile                             |    2 +
 sound/soc/fsl/imx-spdif.c                          |  148 ++++++++++++++++++++
 4 files changed, 195 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
 create mode 100644 sound/soc/fsl/imx-spdif.c
Documentation/devicetree/bindings/sound/imx-audio-spdif.txt new file +34 -0
new file mode 100644
index 0000000..7d13479
@@ -0,0 +1,34 @@
+Freescale i.MX audio complex with S/PDIF transceiver
+
+Required properties:
+
+  - compatible : "fsl,imx-audio-spdif"
+
+  - model : The user-visible name of this sound complex
+
+  - spdif-controller : The phandle of the i.MX S/PDIF controller
+
+
+Optional properties:
+
+  - spdif-out : This is a boolean property. If present, the transmitting
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF out connector/jack on the board or it's connecting to some
+    other IP block, such as an HDMI encoder/display-controller.
+
+  - spdif-in : This is a boolean property. If present, the receiving
+    function of S/PDIF will be enabled, indicating there's a physical
+    S/PDIF in connector/jack on the board.
+
+* Note: At least one of these two properties should be set in the DT binding.
+
+
+Example:
+
+sound-spdif {
+	compatible = "fsl,imx-audio-spdif";
+	model = "imx-spdif";
+	spdif-controller = <&spdif>;
+	spdif-out;
+	spdif-in;
+};
sound/soc/fsl/Kconfig +11 -0
index cd088cc..a708380 100644
@@ -193,6 +193,17 @@ config SND_SOC_IMX_SGTL5000
 	  Say Y if you want to add support for SoC audio on an i.MX board with
 	  a sgtl5000 codec.
 
+config SND_SOC_IMX_SPDIF
+	tristate "SoC Audio support for i.MX boards with S/PDIF"
+	select SND_SOC_IMX_PCM_DMA
+	select SND_SOC_FSL_SPDIF
+	select SND_SOC_FSL_UTILS
+	select SND_SOC_SPDIF
+	help
+	  SoC Audio support for i.MX boards with S/PDIF
+	  Say Y if you want to add support for SoC audio on an i.MX board with
+	  a S/DPDIF.
+
 config SND_SOC_IMX_MC13783
 	tristate "SoC Audio support for I.MX boards with mc13783"
 	depends on MFD_MC13783 && ARM
sound/soc/fsl/Makefile +2 -0
index 4b5970e..e2aaff7 100644
@@ -45,6 +45,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
 snd-soc-wm1133-ev1-objs := wm1133-ev1.o
 snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
 snd-soc-imx-wm8962-objs := imx-wm8962.o
+snd-soc-imx-spdif-objs :=imx-spdif.o
 snd-soc-imx-mc13783-objs := imx-mc13783.o
 
 obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
@@ -53,4 +54,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
 obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
 obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
 obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
+obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
 obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
sound/soc/fsl/imx-spdif.c new file +148 -0

148 lines not on this page · raw message

Signature · 1 line
1.7.1
maintainer Applied
#1 lore raw
Quoted 3 lines · Nicolin Chen

This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and fsl_spdif.c drivers.

Applied, thanks.