ASoC: fsl: Add S/PDIF machine driver
Subsystems (5)
PATCH v12 1/1 ASoC: fsl: Add S/PDIF machine driver
This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and fsl_spdif.c drivers.
---
Changelogv11->v12:
* Dropped unused spdif_pdev.
* Register spdif-dit/dir depending on DT bool property.v10->v11:
* Use boolean properties for spdif-out/in switch instead of codec phandles.
* Accordingly create dummy codec driver in probe() instead of DT nodes.
.../devicetree/bindings/sound/imx-audio-spdif.txt | 34 +++++ sound/soc/fsl/Kconfig | 11 ++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/imx-spdif.c | 148 ++++++++++++++++++++ 4 files changed, 195 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 sound/soc/fsl/imx-spdif.c
Documentation/devicetree/bindings/sound/imx-audio-spdif.txt new file +34 -0
@@ -0,0 +1,34 @@ +Freescale i.MX audio complex with S/PDIF transceiver + +Required properties: + + - compatible : "fsl,imx-audio-spdif" + + - model : The user-visible name of this sound complex + + - spdif-controller : The phandle of the i.MX S/PDIF controller + + +Optional properties: + + - spdif-out : This is a boolean property. If present, the transmitting + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF out connector/jack on the board or it's connecting to some + other IP block, such as an HDMI encoder/display-controller. + + - spdif-in : This is a boolean property. If present, the receiving + function of S/PDIF will be enabled, indicating there's a physical + S/PDIF in connector/jack on the board. + +* Note: At least one of these two properties should be set in the DT binding. + + +Example: + +sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; +};
sound/soc/fsl/Kconfig +11 -0
@@ -193,6 +193,17 @@ config SND_SOC_IMX_SGTL5000 Say Y if you want to add support for SoC audio on an i.MX board with a sgtl5000 codec. +config SND_SOC_IMX_SPDIF + tristate "SoC Audio support for i.MX boards with S/PDIF" + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_SPDIF + select SND_SOC_FSL_UTILS + select SND_SOC_SPDIF + help + SoC Audio support for i.MX boards with S/PDIF + Say Y if you want to add support for SoC audio on an i.MX board with + a S/DPDIF. + config SND_SOC_IMX_MC13783 tristate "SoC Audio support for I.MX boards with mc13783" depends on MFD_MC13783 && ARM
sound/soc/fsl/Makefile +2 -0
@@ -45,6 +45,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o snd-soc-wm1133-ev1-objs := wm1133-ev1.o snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o snd-soc-imx-wm8962-objs := imx-wm8962.o +snd-soc-imx-spdif-objs :=imx-spdif.o snd-soc-imx-mc13783-objs := imx-mc13783.o obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
@@ -53,4 +54,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o +obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
sound/soc/fsl/imx-spdif.c new file +148 -0
148 lines not on this page · raw message
Signature · 1 line
1.7.1
Quoted 3 lines · Nicolin Chen
This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and
fsl_spdif.cdrivers.
Applied, thanks.
Quoted 3 lines · Nicolin Chen
This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and
fsl_spdif.cdrivers.
Sorry for the slow response. For the record, the binding,