Add freescale S/PDIF CPU DAI and machine drivers
Subsystems (5)
v9 cover Add freescale S/PDIF CPU DAI and machine drivers
Changelog:v8->v9:
* Use bool instead of atomic_t.
* Use clk_prepare_enable() instead.
* Dropped dumpregs().
* Dropped unnecessary clk_round_rate().
* Dropped unused clock source enum.
* Revised dev_err() message.v7->v8:
* Revised DT binding doc.
* Revised dev_err() error msg.
* Check return value of clk_set_rate().v6->v7:
* Removed extra comma in array.
* Revised some comments.
* Added some dev_err().
* Check the return value of soft reset.
* Use bitrev8() instead of extra reverse_bits().
* Use cache_bypass as default for regmap.v5->v6:
* Sorted out rxtx clk source in DT binding.
* Use devm_xxxx() functions.
* Use platform_get_resource() instead.v4->v5:
* Dropped rx/tx-clksrc-names DT bindings.
* Use standard clock binding instead to pass the clock source list.
* Update the compatible list by using "imx35", the first SoC that has spdif.v3->v4:
* Use regmap for CPU DAI driver.
* Use individual clock source for 32KHz, 44KHz, 48KHz playback.
* Determine clock source configuration from 'clocks' entry.
* Added imx53 to compatible list, merged imx6q and imx6dl in the list.
* Improve the algorism of reverse_bits().
* Dropped the unneeded clk_put().v2->v3:
* Removed a wrong tag from the commit of patch-1.v1->v2:
* Dropped one applied patch for spdif dummy codec drivers.
* Use generic DMA DT binding.
* Let spdif controller driver calculate the clock div.
* Added one optional clock source for spdif tx.
* Reivsed documentation accordingly.
Nicolin Chen (2):
ASoC: fsl: Add S/PDIF CPU DAI driver
ASoC: fsl: Add S/PDIF machine driver
.../devicetree/bindings/sound/fsl,spdif.txt | 54 + .../devicetree/bindings/sound/imx-audio-spdif.txt | 29 + sound/soc/fsl/Kconfig | 14 + sound/soc/fsl/Makefile | 4 + sound/soc/fsl/fsl_spdif.c | 1236 ++++++++++++++++++++ sound/soc/fsl/fsl_spdif.h | 191 +++ sound/soc/fsl/imx-spdif.c | 134 +++ 7 files changed, 1662 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 sound/soc/fsl/fsl_spdif.c create mode 100644 sound/soc/fsl/fsl_spdif.h create mode 100644 sound/soc/fsl/imx-spdif.c
PATCH v9 1/2 ASoC: fsl: Add S/PDIF CPU DAI driver
This patch implements a device-tree-only CPU DAI driver for Freescale S/PDIF controller that supports stereo playback and record feature.
--- .../devicetree/bindings/sound/fsl,spdif.txt | 54 + sound/soc/fsl/Kconfig | 3 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/fsl_spdif.c | 1236 ++++++++++++++++++++ sound/soc/fsl/fsl_spdif.h | 191 +++ 5 files changed, 1486 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 sound/soc/fsl/fsl_spdif.c create mode 100644 sound/soc/fsl/fsl_spdif.h
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +54 -0
@@ -0,0 +1,54 @@ +Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +The Freescale S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + + - compatible : Compatible list, must contain "fsl,imx35-spdif". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "core" The core clock of spdif controller + "rxtx<0-7>" Clock source list for tx and rx clock. + This clock list should be identical to + the source list connecting to the spdif + clock mux in "SPDIF Transceiver Clock + Diagram" of SoC reference manual. It + can also be referred to TxClk_Source + bit of register SPDIF_STC. + +Example: + +spdif: spdif@02004000 { + compatible = "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + + clocks = <&clks 197>, <&clks 3>, + <&clks 197>, <&clks 107>, + <&clks 0>, <&clks 118>, + <&clks 62>, <&clks 139>, + <&clks 0>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7"; + + status = "okay"; +};
sound/soc/fsl/Kconfig +3 -0
@@ -1,6 +1,9 @@ config SND_SOC_FSL_SSI tristate +config SND_SOC_FSL_SPDIF + tristate + config SND_SOC_FSL_UTILS tristate
sound/soc/fsl/Makefile +2 -0
@@ -12,9 +12,11 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o # Freescale PowerPC SSI/DMA Platform Support snd-soc-fsl-ssi-objs := fsl_ssi.o +snd-soc-fsl-spdif-objs := fsl_spdif.o snd-soc-fsl-utils-objs := fsl_utils.o snd-soc-fsl-dma-objs := fsl_dma.o obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o +obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
sound/soc/fsl/fsl_spdif.c new file +1236 -0
1,236 lines not on this page · raw message
sound/soc/fsl/fsl_spdif.h new file +191 -0
191 lines not on this page · raw message
Signature · 1 line
1.7.1
Re: [PATCH v9 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 6 lines · Nicolin Chen
This patch implements a device-tree-only CPU DAI driver for Freescale S/PDIF controller that supports stereo playback and record feature.
Signed-off-by Nicolin Chen <[email protected]>--- .../devicetree/bindings/sound/fsl,spdif.txt | 54 +
What changed between v8 and v9?
Mark Brown
maintainerRe: [PATCH v9 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 1 line · Stephen Warren
What changed between v8 and v9?
There was a changelog in the cover mail for the series:
| Changelog: | v8->v9: | * Use bool instead of atomic_t. | * Use clk_prepare_enable() instead. | * Dropped dumpregs(). | * Dropped unnecessary clk_round_rate(). | * Dropped unused clock source enum. | * Revised dev_err() message.
PATCH v9 2/2 ASoC: fsl: Add S/PDIF machine driver
In reply to Nicolin ChenThis patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and fsl_spdif.c drivers.
--- .../devicetree/bindings/sound/imx-audio-spdif.txt | 29 +++++ sound/soc/fsl/Kconfig | 11 ++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/imx-spdif.c | 134 ++++++++++++++++++++ 4 files changed, 176 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 sound/soc/fsl/imx-spdif.c
Documentation/devicetree/bindings/sound/imx-audio-spdif.txt new file +29 -0
@@ -0,0 +1,29 @@ +Freescale i.MX audio complex with S/PDIF transceiver + +Required properties: + + - compatible : "fsl,imx-audio-spdif" + + - model : The user-visible name of this sound complex + + - spdif-controller : The phandle of the i.MX S/PDIF controller + + +Optional properties: + + - spdif-transmitter : The phandle of the spdif-transmitter dummy codec + + - spdif-receiver : The phandle of the spdif-receiver dummy codec + +* Note: At least one of these two properties should be set in the DT binding. + + +Example: + +sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-transmitter = <&spdif_tx_codec>; + spdif-receiver = <&spdif_rx_codec>; +};
sound/soc/fsl/Kconfig +11 -0
@@ -193,6 +193,17 @@ config SND_SOC_IMX_SGTL5000 Say Y if you want to add support for SoC audio on an i.MX board with a sgtl5000 codec. +config SND_SOC_IMX_SPDIF + tristate "SoC Audio support for i.MX boards with S/PDIF" + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_SPDIF + select SND_SOC_FSL_UTILS + select SND_SOC_SPDIF + help + SoC Audio support for i.MX boards with S/PDIF + Say Y if you want to add support for SoC audio on an i.MX board with + a S/DPDIF. + config SND_SOC_IMX_MC13783 tristate "SoC Audio support for I.MX boards with mc13783" depends on MFD_MC13783 && ARM
sound/soc/fsl/Makefile +2 -0
@@ -45,6 +45,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o snd-soc-wm1133-ev1-objs := wm1133-ev1.o snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o snd-soc-imx-wm8962-objs := imx-wm8962.o +snd-soc-imx-spdif-objs :=imx-spdif.o snd-soc-imx-mc13783-objs := imx-mc13783.o obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
@@ -53,4 +54,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o +obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
sound/soc/fsl/imx-spdif.c new file +134 -0
134 lines not on this page · raw message
Signature · 1 line
1.7.1
Re: [PATCH v9 2/2] ASoC: fsl: Add S/PDIF machine driver
Quoted 7 lines · Nicolin Chen
This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and
fsl_spdif.cdrivers.Signed-off-by Nicolin Chen <[email protected]>--- .../devicetree/bindings/sound/imx-audio-spdif.txt | 29 +++++
What changed between v8 and v9?
Documentation/devicetree/bindings/sound/imx-audio-spdif.txt line 18
Quoted 9 lines
Documentation/devicetree/bindings/sound/imx-audio-spdif.txt +7
-0+Optional properties: + + - spdif-transmitter : The phandle of the spdif-transmitter dummy codec + + - spdif-receiver : The phandle of the spdif-receiver dummy codec + +* Note: At least one of these two properties should be set in the DT binding.
I still don't think "dummy CODEC" is an appropriate thing to have in DT.
Nicole Otsuka
reviewerRe: [PATCH v9 2/2] ASoC: fsl: Add S/PDIF machine driver
Hi Stephen,
I have a whole changelist in the cover letter (PATCH 0/2). Please take a look at it.
And about the codec dummy things.. I do that only because the codec driver's doc say so.
Thank you,
Nicolin
Quoted 29 lines · Stephen Warren
Quoted 7 lines · Nicolin Chen
This patch implements a device-tree-only machine driver for Freescale i.MX series Soc. It works with spdif_transmitter/spdif_receiver and
fsl_spdif.cdrivers.Signed-off-by Nicolin Chen <[email protected]>--- .../devicetree/bindings/sound/imx-audio-spdif.txt | 29 +++++What changed between v8 and v9?
Review
Quoted 1 line
(quoted diff) +0
-0
b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txtDocumentation/devicetree/bindings/sound/imx-audio-spdif.txt
Quoted 7 lines
Documentation/devicetree/bindings/sound/imx-audio-spdif.txt new file +7
-0+Optional properties: + + - spdif-transmitter : The phandle of the spdif-transmitter dummy codec + + - spdif-receiver : The phandle of the spdif-receiver dummy codec + +* Note: At least one of these two properties should be set in the DTbinding.
I still don't think "dummy CODEC" is an appropriate thing to have in DT.
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Re: [PATCH v9 2/2] ASoC: fsl: Add S/PDIF machine driver
Quoted 7 lines · Nicole Otsuka
Hi Stephen,
I have a whole changelist in the cover letter (PATCH 0/2). Please take a look at it.
And about the codec dummy things.. I do that only because the codec driver's doc say so.
The DT binding document is not meant to be influenced by internal driver architecture.