arm, am33xx: update for the am33xx based siemens boards
Subsystems (2)
v3 cover arm, am33xx: update for the am33xx based siemens boards
Patch 1 introduces bootcount support for the 3 siemens boards. As there is no other possibility on this boards, the bootcounter is stored in the environment. To prevent a "saveenv" on all reboots, a "upgrade_available" U-Boot Environment variable is introduced.
Patch 2 makes the enabling of the RTC32K OSC configurable, as on the dxr2 board it is not used, and
http://www.denx.de/wiki/view/U-Boot/DesignPrinciples#2_Keep_it_Fast
says not enable things not used ...
Patch 3 adds an option to set the iSerialNumber board specific, which is used on the 3 siemens boards.
Patch 4 adds an option to set the bcdDevice number board specific, which is used on the 3 siemens boards.
Patch 5 contains a lot of updates for the siemens boards, see commit message for detailed information.
already posted patches on which this patchserie is based:
[U-Boot,v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
http://patchwork.ozlabs.org/patch/285390/
[U-Boot] net, phy: fix AR8031 phy_mask
http://patchwork.ozlabs.org/patch/276944/
[U-Boot,2/3] net, phy: fix NULL pointer deference
http://patchwork.ozlabs.org/patch/272797/
changes for v2:
- added comments from Lukasz Majewski for the USB DFU related parts changes for v3:
- rebase against current u-boot/master 509dca7a11aad394d781a9d31a7bfa6692562741
Heiko Schocher (4):
bootcount: store bootcount var in environment arm, am33x: make RTC32K OSC enable configurable usb, g_dnl: make iSerialNumber board configurable usb, g_dnl: make bcdDevice value configurable
Samuel Egli (1):
arm, am335x: update for the siemens boards
README | 19 ++++ arch/arm/cpu/armv7/am33xx/board.c | 4 + board/siemens/common/factoryset.c | 24 ++++- board/siemens/common/factoryset.h | 2 + board/siemens/dxr2/board.c | 11 +-- board/siemens/dxr2/board.h | 9 +- board/siemens/dxr2/mux.c | 158 +++++++++++++++++++++++++++++++++ board/siemens/pxm2/board.c | 3 +- board/siemens/rut/board.c | 51 +++++++++-- drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount_env.c | 29 ++++++ drivers/usb/gadget/g_dnl.c | 43 ++++++++- include/configs/dxr2.h | 13 ++- include/configs/pxm2.h | 7 +- include/configs/rut.h | 10 ++- include/configs/siemens-am33x-common.h | 69 ++++++++++---- include/configs/ti_am335x_common.h | 1 + include/g_dnl.h | 1 + 18 files changed, 399 insertions(+), 56 deletions(-) create mode 100644 drivers/bootcount/bootcount_env.c
Signature · 1 line
1.8.3.1
PATCH v3 1/5 bootcount: store bootcount var in environment
If no softreset save registers are found on the hardware "bootcount" is stored in the environment. To prevent a saveenv on all reboots, the environment variable "upgrade_available" is introduced. If "upgrade_available" is 0, "bootcount" is always 0 therefore no need to save the environment on u-boot boot, if "upgrade_available" is 1 "bootcount" is incremented in the environment and environment gets written on u-boot start.
So the Userspace Applikation must set the "upgrade_available" and "bootcount" variable to 0 (for example with fw_setenv), if a boot was successfully.
---
- changes for v3
rebase against current u-boot/master
509dca7a11aad394d781a9d31a7bfa6692562741
- changes for v2
none
--- README | 16 ++++++++++++++++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount_env.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 46 insertions(+) create mode 100644 drivers/bootcount/bootcount_env.c
README +16 -0
@@ -784,6 +784,22 @@ The following options need to be configured: as a convenience, when switching between booting from RAM and NFS. +- Bootcount: + CONFIG_BOOTCOUNT_LIMIT + Implements a mechanism for detecting a repeating reboot + cycle, see: + http://www.denx.de/wiki/view/DULG/UBootBootCountLimit + + CONFIG_BOOTCOUNT_ENV + If no softreset save registers are found on the hardware + "bootcount" is stored in the environment. To prevent a + saveenv on all reboots, the environment variable + "upgrade_available" is used. If "upgrade_available" is + 0, "bootcount" is always 0, if "upgrade_available" is + 1 "bootcount" is incremented in the environment. + So the Userspace Applikation must set the "upgrade_available" + and "bootcount" variable to 0, if a boot was successfully. + - Pre-Boot Commands: CONFIG_PREBOOT
drivers/bootcount/Makefile +1 -0
@@ -11,6 +11,7 @@ COBJS-$(CONFIG_AT91SAM9XE) += bootcount_at91.o COBJS-$(CONFIG_BLACKFIN) += bootcount_blackfin.o COBJS-$(CONFIG_SOC_DA8XX) += bootcount_davinci.o COBJS-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o +COBJS-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c)
drivers/bootcount/bootcount_env.c new file +29 -0
@@ -0,0 +1,29 @@ +/* +* (C) Copyright 2013 +* Heiko Schocher, DENX Software Engineering, hs at denx.de. +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#include <common.h> + +void bootcount_store (ulong a) +{ +int upgrade_available =getenv_ulong ("upgrade_available" ,10 ,0 ); + +if (upgrade_available) { +setenv_ulong ("bootcount" , a); +saveenv (); + } +} + +ulong bootcount_load (void ) +{ +int upgrade_available =getenv_ulong ("upgrade_available" ,10 ,0 ); +ulong val =0 ; + +if (upgrade_available) + val =getenv_ulong ("bootcount" ,10 ,0 ); + +return val; +}
Signature · 1 line
1.8.3.1
PATCH v3 1/5 bootcount: store bootcount var in environment
Quoted 12 lines · Heiko Schocher
If no softreset save registers are found on the hardware "bootcount" is stored in the environment. To prevent a saveenv on all reboots, the environment variable "
upgrade_available" is introduced. If "upgrade_available" is 0, "bootcount" is always 0 therefore no need to save the environment on u-boot boot, if "upgrade_available" is 1 "bootcount" is incremented in the environment and environment gets written on u-boot start.
So the Userspace Applikation must set the "upgrade_available" and "bootcount" variable to 0 (for example withfw_setenv), if a boot was successfully.
Quoted 1 line
Signed-off-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131112/c1103d38/attachment.pgp>
PATCH v3 2/5 arm, am33x: make RTC32K OSC enable configurable
In reply to Heiko SchocherAs
http://www.denx.de/wiki/view/U-Boot/DesignPrinciples#2_Keep_it_Fast
states:
"Initialize devices only when they are needed within U-Boot"
enable the RTC32K OSC only, if CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is enabled. Enable this in ti_am335x_common.h, so all boards in mainline should work as before.
---
On the dxr2 board the RTC32K_OSC it is not used, so disable it for this board, done in the 5th patch of this patchserie "arm-am335x-update-for-the-siemens-boards"
- changes for v3
rebase against current u-boot/master
509dca7a11aad394d781a9d31a7bfa6692562741
- changes for v2
none
--- README | 3 +++ arch/arm/cpu/armv7/am33xx/board.c | 4 ++++ include/configs/ti_am335x_common.h | 1 + 3 files changed, 8 insertions(+)
README +3 -0
@@ -4325,6 +4325,9 @@ Low Level (hardware related) configuration options: NOTE : currently only supported on AM335x platforms. +- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC: + Enables the RTC32K OSC on AM33xx based plattforms + Freescale QE/FMAN Firmware Support: -----------------------------------
arch/arm/cpu/armv7/am33xx/board.c +4 -0
@@ -148,6 +148,7 @@ __weak void am33xx_spl_board_init(void)do_setup_dpll (&dpll_mpu_regs, &dpll_mpu_opp100); } +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC )static void rtc32k_enable (void ) {struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE ;
@@ -163,6 +164,7 @@ static void rtc32k_enable(void)/* Enable the RTC 32K OSC by setting bits 3 and 6. */ writel((1 << 3) | (1 << 6), &rtc->osc); } +#endif static void uart_soft_reset (void ) {
@@ -231,8 +233,10 @@ void s_init(void)#if defined(CONFIG_SPL_BUILD ) || defined(CONFIG_NOR_BOOT )prcm_init ();set_mux_conf_regs (); +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC )/* Enable RTC32K clock */ rtc32k_enable (); +#endif sdram_init ();#endif }
include/configs/ti_am335x_common.h +1 -0
@@ -18,6 +18,7 @@#define CONFIG_SYS_CACHELINE_SIZE 64#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20)/* 1GB */ #define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ +#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #include <asm/arch/omap.h>
Signature · 1 line
1.8.3.1
PATCH v3 2/5 arm, am33x: make RTC32K OSC enable configurable
Quoted 11 lines · Heiko Schocher
As
http://www.denx.de/wiki/view/U-Boot/DesignPrinciples#2_Keep_it_Fast
states:
"Initialize devices only when they are needed within U-Boot"enable the RTC32K OSC only, if
CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSCis enabled. Enable this inti_am335x_common.h, so all boards in mainline should work as before.Signed-off-by Heiko Schocher <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131112/ab5c94b2/attachment.pgp>
PATCH v3 3/5 usb, g_dnl: make iSerialNumber board configurable
In reply to Heiko Schocheradd the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is 0x0. This value can changed board specific through the new function g_dnl_set_serialnumber() which must be called from the board specific function g_dnl_bind_fixup().
---
- changes for v3
rebase against current u-boot/master 509dca7a11aad394d781a9d31a7bfa6692562741
changes for v2:
- as Lukasz Majewski suggested, remove CONFIG_G_DNL_SERIAL_STRING define
--- drivers/usb/gadget/g_dnl.c | 20 ++++++++++++++++++++ include/g_dnl.h | 1 + 2 files changed, 21 insertions(+)
drivers/usb/gadget/g_dnl.c +20 -0
@@ -33,6 +33,9 @@#define STRING_PRODUCT 2/* Index of String Descriptor describing this configuration */ #define STRING_USBDOWN 2 +/* Index of String serial */ +#define STRING_SERIAL 3 +#define MAX_STRING_SERIAL 32/* Number of supported configurations */ #define CONFIGURATION_NUMBER 1
@@ -40,8 +43,16 @@static const char shortname[] ="usb_dnl_" ;static const char product[] ="USB download gadget" ; +static char g_dnl_serial[MAX_STRING_SERIAL ];static const char manufacturer[] =CONFIG_G_DNL_MANUFACTURER ; +void g_dnl_set_serialnumber (char *s) +{ +memset (g_dnl_serial,0 ,MAX_STRING_SERIAL ); +if (strlen (s) <MAX_STRING_SERIAL ) +strncpy (g_dnl_serial, s,strlen (s)); +} +static struct usb_device_descriptor device_desc = { .bLength =sizeof device_desc, .bDescriptorType =USB_DT_DEVICE ,
@@ -53,6 +64,7 @@ static struct usb_device_descriptor device_desc = { .idVendor = __constant_cpu_to_le16(CONFIG_G_DNL_VENDOR_NUM), .idProduct = __constant_cpu_to_le16(CONFIG_G_DNL_PRODUCT_NUM), .iProduct = STRING_PRODUCT, + .iSerialNumber = STRING_SERIAL, .bNumConfigurations = 1, };
@@ -63,6 +75,7 @@ static struct usb_device_descriptor device_desc = {static struct usb_string g_dnl_string_defs[] = { {.s = manufacturer}, {.s = product}, + {.s = g_dnl_serial}, { }/* end of list */ };
@@ -156,6 +169,13 @@ static int g_dnl_bind(struct usb_composite_dev *cdev) g_dnl_string_defs[1 ].id = id; device_desc.iProduct = id; + id =usb_string_id (cdev); +if (id <0 ) +return id; + + g_dnl_string_defs[2 ].id = id; + device_desc.iSerialNumber = id; +g_dnl_bind_fixup (&device_desc, cdev->driver->name); ret =g_dnl_config_register (cdev);if (ret)
include/g_dnl.h +1 -0
@@ -13,5 +13,6 @@int g_dnl_bind_fixup (struct usb_device_descriptor *,const char *);int g_dnl_register (const char *s);void g_dnl_unregister (void ); +void g_dnl_set_serialnumber (char *);#endif /* __G_DOWNLOAD_H_ */
Signature · 1 line
1.8.3.1
PATCH v3 3/5 usb, g_dnl: make iSerialNumber board configurable
Hi Heiko,
Quoted 6 lines
add the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is
0x0. This value can changed board specific through the new functiong_dnl_set_serialnumber()which must be called from the board specific functiong_dnl_bind_fixup().
Test HW: TRATS.
I will apply it to u-boot-dfu.
Quoted 90 lines
Signed-off-by Heiko Schocher <[email protected]>Cc Marek Vasut <[email protected]>Cc Lukasz Majewski <[email protected]>Cc Kyungmin Park <[email protected]>---
- changes for v3
rebase against current u-boot/master509dca7a11aad394d781a9d31a7bfa6692562741
changes for v2:
- as Lukasz Majewski suggested, removeCONFIG_G_DNL_SERIAL_STRINGdefine--- drivers/usb/gadget/g_dnl.c | 20 ++++++++++++++++++++ include/g_dnl.h | 1 + 2 files changed, 21 insertions(+)drivers/usb/gadget/g_dnl.c +11
-0@@ -33,6 +33,9 @@#define STRING_PRODUCT 2/* Index of String Descriptor describing this configuration */ #define STRING_USBDOWN 2 +/* Index of String serial */ +#define STRING_SERIAL 3 +#define MAX_STRING_SERIAL 32/* Number of supported configurations */ #define CONFIGURATION_NUMBER 1@@ -40,8 +43,16 @@static const char shortname[] ="usb_dnl_" ;static const char product[] ="USB download gadget" ; +static char g_dnl_serial[MAX_STRING_SERIAL ];static const char manufacturer[] =CONFIG_G_DNL_MANUFACTURER ; +void g_dnl_set_serialnumber (char *s) +{ +memset (g_dnl_serial,0 ,MAX_STRING_SERIAL ); +if (strlen (s) <MAX_STRING_SERIAL ) +strncpy (g_dnl_serial, s,strlen (s)); +} +static struct usb_device_descriptor device_desc = { .bLength =sizeof device_desc, .bDescriptorType =USB_DT_DEVICE ,@@ -53,6 +64,7 @@ static struct usb_device_descriptor device_desc = { .idVendor = __constant_cpu_to_le16(CONFIG_G_DNL_VENDOR_NUM), .idProduct =
__constant_cpu_to_le16(CONFIG_G_DNL_PRODUCT_NUM), .iProduct =STRING_PRODUCT,drivers/usb/gadget/g_dnl.c +9
-0+ .iSerialNumber = STRING_SERIAL, .bNumConfigurations = 1, };@@ -63,6 +75,7 @@ static struct usb_device_descriptor device_desc = {static struct usb_string g_dnl_string_defs[] = { {.s = manufacturer}, {.s = product}, + {.s = g_dnl_serial}, { }/* end of list */ };@@ -156,6 +169,13 @@ static int g_dnl_bind(struct usb_composite_dev *cdev) g_dnl_string_defs[1].id = id; device_desc.iProduct = id; + id =usb_string_id (cdev); +if (id <0 ) +return id; + + g_dnl_string_defs[2 ].id = id; + device_desc.iSerialNumber = id; +g_dnl_bind_fixup (&device_desc, cdev->driver->name); ret =g_dnl_config_register (cdev);if (ret)include/g_dnl.h +1
-0@@ -13,5 +13,6 @@int g_dnl_bind_fixup (struct usb_device_descriptor *,const char *);int g_dnl_register (const char *s);void g_dnl_unregister (void ); +void g_dnl_set_serialnumber (char *);#endif /* __G_DOWNLOAD_H_ */
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
PATCH v3 3/5 usb, g_dnl: make iSerialNumber board configurable
Hello Lukasz,
Am 04.11.2013 16:12, schrieb Lukasz Majewski:
Quoted 9 lines
Hi Heiko,
Quoted 6 lines
add the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is
0x0. This value can changed board specific through the new functiong_dnl_set_serialnumber()which must be called from the board specific functiong_dnl_bind_fixup().
Quoted 5 lines
Tested-by Lukasz Majewski<[email protected]>Test HW: TRATS.
I will apply it to u-boot-dfu.
Thanks!
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH v3 3/5 usb, g_dnl: make iSerialNumber board configurable
In reply to Lukasz MajewskiDear Lukasz Majewski,
Quoted 8 lines
Hi Heiko,
Quoted 5 lines
add the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is
0x0. This value can changed board specific through the new functiong_dnl_set_serialnumber()which must be called from the board specific functiong_dnl_bind_fixup().
Quoted 5 lines
Tested-by Lukasz Majewski <[email protected]>Test HW: TRATS.
I will apply it to u-boot-dfu.
Is this u-boot-dfu a new thing ?
Best regards,
Marek Vasut
PATCH v3 3/5 usb, g_dnl: make iSerialNumber board configurable
Hi Marek,
Quoted 10 lines
Dear Lukasz Majewski,
Quoted 8 lines
Hi Heiko,
Quoted 5 lines
add the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is
0x0. This value can changed board specific through the new functiong_dnl_set_serialnumber()which must be called from the board specific functiong_dnl_bind_fixup().
Quoted 7 lines
Quoted 5 lines
Tested-by Lukasz Majewski <[email protected]>Test HW: TRATS.
I will apply it to u-boot-dfu.
Is this u-boot-dfu a new thing ?
Yes. As we spoken at the mini summit.
Marek, as a result you shall have less work :-)
Quoted 3 lines
Best regards,
Marek Vasut
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
PATCH v3 3/5 usb, g_dnl: make iSerialNumber board configurable
Dear Lukasz Majewski,
Quoted 16 lines
Hi Marek,
Quoted 14 lines
Dear Lukasz Majewski,
Quoted 12 lines
Hi Heiko,
Quoted 5 lines
add the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is
0x0. This value can changed board specific through the new functiong_dnl_set_serialnumber()which must be called from the board specific functiong_dnl_bind_fixup().Tested-by Lukasz Majewski <[email protected]>Test HW: TRATS.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
I will apply it to u-boot-dfu.
Is this u-boot-dfu a new thing ?
Yes. As we spoken at the mini summit.
Marek, as a result you shall have less work :-)
Cool, are you sending this directly to Tom or am I getting pullRQ from you ?
Best regards,
Marek Vasut
PATCH v3 3/5 usb, g_dnl: make iSerialNumber board configurable
Hi Marek,
Quoted 20 lines
Dear Lukasz Majewski,
Quoted 18 lines
Hi Marek,
Quoted 16 lines
Dear Lukasz Majewski,
Quoted 13 lines
Hi Heiko,
Quoted 5 lines
add the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is
0x0. This value can changed board specific through the new functiong_dnl_set_serialnumber()which must be called from the board specific functiong_dnl_bind_fixup().Tested-by Lukasz Majewski <[email protected]>Test HW: TRATS.
I will apply it to u-boot-dfu.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Is this u-boot-dfu a new thing ?
Yes. As we spoken at the mini summit.
Marek, as a result you shall have less work :-)
Cool, are you sending this directly to Tom or am I getting pullRQ from you ?
I guess, that it is up to You and Tom.
Quoted 3 lines
Best regards,
Marek Vasut
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
PATCH v3 4/5 usb, g_dnl: make bcdDevice value configurable
In reply to Heiko Schocheradd the possibility to set the bcdDevice number board specific. Therefore the weak function g_dnl_get_board_bcd_device_number() is introduced. Used on the siemens boards.
---
- changes for v3
rebase against current u-boot/master
509dca7a11aad394d781a9d31a7bfa6692562741
- changes for v2:
add Acked-by from Lukasz Majewski
--- drivers/usb/gadget/g_dnl.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
drivers/usb/gadget/g_dnl.c +19 -4
@@ -147,6 +147,23 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)return 0 ; } +__weak int g_dnl_get_board_bcd_device_number (int gcnum) +{ +return gcnum; +} + +static int g_dnl_get_bcd_device_number (struct usb_composite_dev *cdev) +{ +struct usb_gadget *gadget = cdev->gadget; +int gcnum; + + gcnum =usb_gadget_controller_number (gadget); +if (gcnum >0 ) + gcnum +=0x200 ; + +return g_dnl_get_board_bcd_device_number (gcnum); +} +static int g_dnl_bind (struct usb_composite_dev *cdev) {struct usb_gadget *gadget = cdev->gadget;
@@ -181,11 +198,9 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)if (ret) goto error; - gcnum =usb_gadget_controller_number (gadget); - -debug ("gcnum: %d\n" , gcnum); + gcnum =g_dnl_get_bcd_device_number (cdev);if (gcnum >=0 ) - device_desc.bcdDevice =cpu_to_le16 (0x0200 + gcnum); + device_desc.bcdDevice =cpu_to_le16 (gcnum);else {debug ("%s: controller '%s' not recognized\n" , shortname, gadget->name);
Signature · 1 line
1.8.3.1
PATCH v3 4/5 usb, g_dnl: make bcdDevice value configurable
Quoted 8 lines · Heiko Schocher
add the possibility to set the bcdDevice number board specific. Therefore the weak function
g_dnl_get_board_bcd_device_number()is introduced. Used on the siemens boards.Signed-off-by Heiko Schocher <[email protected]>Acked-by Lukasz Majewski <[email protected]>Cc Marek Vasut <[email protected]>Cc Kyungmin Park <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131112/2849f40c/attachment.pgp>
PATCH v3 5/5 arm, am335x: update for the siemens boards
In reply to Heiko SchocherFrom: Samuel Egli <[email protected]>
- dxr2: define unused pins as input
- do not enable RTC32K OSC on dxr2 board
- update default environment
- add splashpos=m,m to default environment, so splash screen is always centered.
- adapt environment for bootcount feature
- add altbootcmd to default environment
- rut: SPL add early reset pulse for eth-phy, maXTouch and display
- rut: display timing aenderungen
- siemens boards: adapt for background color = white
- add boutcount feature for the siemens boards
store the bootcount in the environment, as we have no softreset save registers on this hardware. Use therefore the CONFIG_BOOTCOUNT_ENV bootcount driver.
- change spi mode from 3 to 0 for the lcd init
- add gpio pin for lcd reset with state 0 and add mdelay
- siemens boards: use own USB id's
- add dfu serial and device number for siemens boards
Add for the siemens boards the possibility to define in dfu mode, the iSerialNumber and the bcdDevice fields in the USB Device descriptor.
- fix upgrade mechanism based on bootcount
Correct location of saveenv and remove not active variable.
Add CONFIG_BOOT_RETRY_TIME and CONFIG_RESET_TO_RETRY to reboot board in case of empty kernel partition. Without these defines an empty kernel partition leads to an abort of boot process and one remains in u-boot prompt.
- general cleanup of dxr2, pxm2 and rut boards all:
* Remove net boot from bootcmd
Ping can cause a crash on boards without ethernet phy. net_nfs command is used only for development
* Add reset at the end of bootcmd
In order to have an immediate reset of the boot when bootcmd fails, add reset at the end of bootcmd.
rut:
* add nand_img_size
dxr2:
* update nand_img_size
* ddr3 timings updated with iocontrol property that can be modified via eeprom. New default parameters from software leveling with draco ES2.
---
- changes for v3
rebase against current u-boot/master 509dca7a11aad394d781a9d31a7bfa6692562741
changes for v2:
- remove CONFIG_G_DNL_SERIAL_STRING
--- board/siemens/common/factoryset.c | 24 ++++- board/siemens/common/factoryset.h | 2 + board/siemens/dxr2/board.c | 11 +-- board/siemens/dxr2/board.h | 9 +- board/siemens/dxr2/mux.c | 158 +++++++++++++++++++++++++++++++++ board/siemens/pxm2/board.c | 3 +- board/siemens/rut/board.c | 51 +++++++++-- include/configs/dxr2.h | 13 ++- include/configs/pxm2.h | 7 +- include/configs/rut.h | 10 ++- include/configs/siemens-am33x-common.h | 69 ++++++++++---- 11 files changed, 305 insertions(+), 52 deletions(-)
board/siemens/common/factoryset.c +22 -2
@@ -15,7 +15,8 @@#include <asm/arch/sys_proto.h> #include <asm/unaligned.h> #include <net.h> -#include <usbdescriptors.h> +#include <errno.h> +#include <g_dnl.h> #include "factoryset.h" #define EEPR_PG_SZ 0x80
@@ -224,8 +225,20 @@ int factoryset_read_eeprom(int i2c_addr) MAX_STRING_LENGTH)) {debug ("display name: %s\n" , factory_dat.disp_name); } -#endif +if (0 <=get_factory_record_val (cp, size, (uchar *)"DEV" , + (uchar *)"num" , factory_dat.serial, +MAX_STRING_LENGTH )) { +debug ("serial number: %s\n" , factory_dat.serial); + } +if (0 <=get_factory_record_val (cp, size, (uchar *)"DEV" , + (uchar *)"ver" , buf, +MAX_STRING_LENGTH )) { + factory_dat.version =simple_strtoul ((char *)buf, +NULL ,16 ); +debug ("version number: %d\n" , factory_dat.version); + } +return 0 ; err:
@@ -279,6 +292,13 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) {put_unaligned (factory_dat.usb_vendor_id, &dev->idVendor);put_unaligned (factory_dat.usb_product_id, &dev->idProduct); +g_dnl_set_serialnumber ((char *)factory_dat.serial); +return 0 ; } + +int g_dnl_get_board_bcd_device_number (int gcnum) +{ +return factory_dat.version; +}#endif /* defined(CONFIG_SPL_BUILD) */
board/siemens/common/factoryset.h +2 -0
@@ -18,6 +18,8 @@ struct factorysetcontainer {#if defined(CONFIG_VIDEO )unsigned char disp_name[MAX_STRING_LENGTH ];#endif +unsigned char serial[MAX_STRING_LENGTH ]; +int version; };int factoryset_read_eeprom (int i2c_addr);
board/siemens/dxr2/board.c +6 -5
@@ -38,11 +38,11 @@ DECLARE_GLOBAL_DATA_PTR;#ifdef CONFIG_SPL_BUILD static struct dxr2_baseboard_id __attribute__((section (".data" ))) settings; - +/* @303MHz-i0 */ const struct ddr3_data ddr3_default = { -0x33524444 ,0x56312e33 ,0x0100 ,0x0001 ,0x003A ,0x008A ,0x010B , -0x00C4 ,0x0888A39B ,0x26247FDA ,0x501F821F ,0x0006 ,0x61C04AB2 , -0x00000618 , +0x33524444 ,0x56312e34 ,0x0080 ,0x0000 ,0x0038 ,0x003E ,0x00A4 , +0x0075 ,0x0888A39B ,0x26247FDA ,0x501F821F ,0x00100206 ,0x61A44A32 , +0x00000618 ,0x0000014A , };static void set_default_ddr3_timings (void )
@@ -73,6 +73,7 @@ static void print_ddr3_timings(void)PRINTARGS (sdram_config);PRINTARGS (ref_ctrl); +PRINTARGS (ioctr_val); }static void print_chip_data (void )
@@ -168,7 +169,7 @@ struct cmd_control dxr2_ddr3_cmd_ctrl_data = { dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; -config_ddr (DDR_PLL_FREQ ,DXR2_IOCTRL_VAL , &dxr2_ddr3_data, +config_ddr (DDR_PLL_FREQ , settings.ddr3.ioctr_val, &dxr2_ddr3_data, &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data,0 ); }
board/siemens/dxr2/board.h +5 -4
@@ -22,11 +22,11 @@#define MAGIC_CHIP 0x50494843/* Automatic generated definition */ -/* Wed, 19 Jun 2013 10:57:48 +0200 */ -/* From file: draco/ddr3-data-micron.txt */ +/* Wed, 18 Sep 2013 18:58:27 +0200 */ +/* From file: draco/ddr3-data-micron-v2.txt */ struct ddr3_data {unsigned int magic;/* 0x33524444 */ -unsigned int version;/* 0x56312e33 */ +unsigned int version;/* 0x56312e34 */ unsigned short int ddr3_sratio;/* 0x0100 */ unsigned short int iclkout;/* 0x0001 */ unsigned short int dt0rdsratio0;/* 0x003A */
@@ -36,9 +36,10 @@ struct ddr3_data {unsigned int sdram_tim1;/* 0x0888A39B */ unsigned int sdram_tim2;/* 0x26247FDA */ unsigned int sdram_tim3;/* 0x501F821F */ -unsigned short int emif_ddr_phy_ctlr_1;/* 0x0006 */ +unsigned int emif_ddr_phy_ctlr_1;/* 0x00100206 */ unsigned int sdram_config;/* 0x61C04AB2 */ unsigned int ref_ctrl;/* 0x00000618 */ +unsigned int ioctr_val;/* 0x0000018B */ };struct chip_data {
board/siemens/dxr2/mux.c +158 -0
164 lines not on this page · raw message
board/siemens/pxm2/board.c +1 -2
@@ -413,8 +413,7 @@ static int conf_disp_pll(int m, int n)static int board_video_init (void ) { -/* set 300 MHz */ -conf_disp_pll (25 ,2 ); +conf_disp_pll (24 ,1 );if (factory_dat.pxm50)da8xx_video_init (&lcd_panels[0 ], &lcd_cfg, lcd_cfg.bpp);else
board/siemens/rut/board.c +45 -6
86 lines not on this page · raw message
include/configs/dxr2.h +6 -7
@@ -21,8 +21,8 @@#define CONFIG_SYS_MPUCLK 275#define DXR2_IOCTRL_VAL 0x18b -#define DDR_PLL_FREQ 266 -#define CONFIG_SPL_AM33XX_DO_NOT_ENABLE_RTC32K +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC#define BOARD_DFU_BUTTON_GPIO 27#define BOARD_DFU_BUTTON_LED 64
@@ -62,7 +62,7 @@/* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=dxr2\0" \ - "nand_img_size=0x300000\0" \ + "nand_img_size=0x400000\0" \ "optargs=\0" \ CONFIG_COMMON_ENV_SETTINGS
@@ -75,10 +75,9 @@"run dfu_start; " \"reset; " \"fi;" \ -"if ping ${serverip}; then " \ -"run net_nfs; " \ -"fi;" \ -"run nand_boot;" +"run nand_boot;" \ +"reset;" +#else #define CONFIG_BOOTDELAY 0
include/configs/pxm2.h +4 -3
@@ -70,6 +70,7 @@"hostname=pxm2\0" \"nand_img_size=0x500000\0" \"optargs=\0" \ +"splashpos=m,m\0" \CONFIG_COMMON_ENV_SETTINGS \"mmc_dev=0\0" \"mmc_root=/dev/mmcblk0p2 rw\0" \
@@ -118,9 +119,7 @@"fi;" \"fi;" \"run nand_boot;" \ -"if ping ${serverip}; then " \ -"run net_nfs; " \ - "fi; " + "reset;"#else #define CONFIG_BOOTDELAY 0
@@ -148,6 +147,8 @@#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE#define PWM_TICKS 0x1388#define PWM_DUTY 0x200 +#define CONFIG_SYS_CONSOLE_BG_COL 0xff +#define CONFIG_SYS_CONSOLE_FG_COL 0x00#endif #endif /* ! __CONFIG_PXM2_H */
include/configs/rut.h +6 -4
@@ -65,7 +65,8 @@/* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=rut\0" \ - "splashpos=488,352\0" \ + "nand_img_size=0x500000\0" \ + "splashpos=m,m\0" \ "optargs=fixrtc --no-log consoleblank=0 \0" \ CONFIG_COMMON_ENV_SETTINGS \ "mmc_dev=0\0" \
@@ -111,9 +112,7 @@"fi;" \"fi;" \"run nand_boot;" \ -"if ping ${serverip}; then " \ -"run net_nfs; " \ - "fi; " + "reset;"#else #define CONFIG_BOOTDELAY 0
@@ -151,6 +150,9 @@#define BOARD_LCD_RESET 115/* Bank 3 pin 19 */ #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_FORMIKE +#define DISPL_PLL_SPREAD_SPECTRUM +#define CONFIG_SYS_CONSOLE_BG_COL 0xff +#define CONFIG_SYS_CONSOLE_FG_COL 0x00#endif #endif /* ! __CONFIG_RUT_H */
include/configs/siemens-am33x-common.h +50 -19
120 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH v3 5/5 arm, am335x: update for the siemens boards
Quoted 51 lines · Heiko Schocher
From: Samuel Egli <[email protected]>
- dxr2: define unused pins as input
- do not enable RTC32K OSC on dxr2 board
- update default environment
- add splashpos=m,m to default environment, so splash screen is always centered.
- adapt environment for bootcount feature
- add altbootcmd to default environment
- rut: SPL add early reset pulse for eth-phy, maXTouch and display
- rut: display timing aenderungen
- siemens boards: adapt for background color = white
- add boutcount feature for the siemens boards
store the bootcount in the environment, as we have no softreset save registers on this hardware. Use therefore theCONFIG_BOOTCOUNT_ENVbootcount driver.
- change spi mode from 3 to 0 for the lcd init
- add gpio pin for lcd reset with state 0 and add mdelay
- siemens boards: use own USB id's
- add dfu serial and device number for siemens boards
Add for the siemens boards the possibility to define in dfu mode, the iSerialNumber and the bcdDevice fields in the USB Device descriptor.
- fix upgrade mechanism based on bootcount
Correct location of saveenv and remove not active variable.Add
CONFIG_BOOT_RETRY_TIMEandCONFIG_RESET_TO_RETRYto reboot board in case of empty kernel partition. Without these defines an empty kernel partition leads to an abort of boot process and one remains in u-boot prompt.- general cleanup of dxr2, pxm2 and rut boards all:
* Remove net boot from bootcmd
Ping can cause a crash on boards without ethernet phy.net_nfscommand is used only for development* Add reset at the end of bootcmd
In order to have an immediate reset of the boot when bootcmd fails, add reset at the end of bootcmd.rut:
* addnand_img_sizedxr2:
* updatenand_img_size* ddr3 timings updated with iocontrol property that can be modified via eeprom. New default parameters from software leveling with draco ES2.
Quoted 6 lines
Signed-off-by Samuel Egli <[email protected]>Signed-off-by Pascal Bach <[email protected]>Signed-off-by Roger Meier <[email protected]>Signed-off-by Heiko Schocher <[email protected]>Cc Matthias Michel <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131112/49d122bd/attachment.pgp>