Skip to contentSkip to conversation

x86, platform, xen, kconfig: add xen defconfig helpers

RFC Superseded Luis R. Rodriguez 5 participants 8 messages Jun 5, 2014 – Jun 9, 2014 x86

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

RFC 1/1 x86, platform, xen, kconfig: add xen defconfig helpers

From: "Luis R. Rodriguez" <[email protected]>

---

Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?

Please note that since this is going upstream it makes no sense to add things which are not upstream though.

Thanks,

Luis

 arch/x86/Makefile                 | 12 ++++++++++++
 arch/x86/configs/xen_dom0.config  | 37 +++++++++++++++++++++++++++++++++++++
 arch/x86/configs/xen_guest.config | 37 +++++++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+)
 create mode 100644 arch/x86/configs/xen_dom0.config
 create mode 100644 arch/x86/configs/xen_guest.config
arch/x86/Makefile +12 -0
index 33f71b0..8b2bada 100644
@@ -256,6 +256,16 @@ kvmconfig:
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/kvm_guest.config
 	$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
 
+xendom0config:
+	$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_dom0.config
+	$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+
+xenguestconfig:
+	$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_guest.config
+	$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+
 define archhelp
   echo  '* bzImage      - Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install      - Install kernel using'
@@ -270,4 +280,6 @@ define archhelp
   echo  '                  FDARGS="..."  arguments for the booted kernel'
   echo  '                  FDINITRD=file initrd for the booted kernel'
   echo  '  kvmconfig	- Enable additional options for guest kernel support'
+  echo  '  xendom0config  - Enable additional options for xen dom0 kernel support'
+  echo  '  xenguestconfig - Enable additional options for xen guest kernel support'
 endef
arch/x86/configs/xen_dom0.config new file +37 -0
new file mode 100644
index 0000000..3f155e0
@@ -0,0 +1,37 @@
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
+CONFIG_XEN_PVH=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_NETXEN_NIC=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_TCG_XEN is not set
+CONFIG_XEN_WDT=m
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_PRIVCMD=m
+CONFIG_XEN_ACPI_PROCESSOR=m
+# CONFIG_XEN_MCE_LOG is not set
+CONFIG_XEN_HAVE_PVMMU=y
arch/x86/configs/xen_guest.config new file +37 -0
new file mode 100644
index 0000000..3f155e0
@@ -0,0 +1,37 @@
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
+CONFIG_XEN_PVH=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_NETXEN_NIC=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_TCG_XEN is not set
+CONFIG_XEN_WDT=m
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_PRIVCMD=m
+CONFIG_XEN_ACPI_PROCESSOR=m
+# CONFIG_XEN_MCE_LOG is not set
+CONFIG_XEN_HAVE_PVMMU=y
Signature · 1 line
2.0.0.rc3.18.g00a5b79
#1 lore raw
Quoted 5 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

---

Quoted 8 lines

Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?

This looks like a good idea but I would only have one Xen option. There are so few options that only apply to dom0 that it doesn't make sense to have a dom0 option.

arch/x86/configs/xen_dom0.config

Quoted 2 lines
arch/x86/configs/xen_dom0.config new file +0 -0

Make this xen.config

arch/x86/configs/xen_dom0.config line 12

Quoted 13 lines
arch/x86/configs/xen_dom0.config new file +12 -0
@@ -0,0 +1,37 @@
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
+CONFIG_XEN_PVH=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_NETXEN_NIC=m

Remove this as it isn't a Xen related option, but an ethernet driver.

arch/x86/configs/xen_dom0.config line 18

Quoted 6 lines
arch/x86/configs/xen_dom0.config new file +6 -0
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_TCG_XEN is not set

Enable as a module.

Quoted 9 lines
arch/x86/configs/xen_dom0.config new file +9 -0
+CONFIG_XEN_WDT=m
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y

arch/x86/configs/xen_dom0.config line 37

Quoted 10 lines
arch/x86/configs/xen_dom0.config new file +10 -0
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_PRIVCMD=m
+CONFIG_XEN_ACPI_PROCESSOR=m
+# CONFIG_XEN_MCE_LOG is not set
+CONFIG_XEN_HAVE_PVMMU=y

David

#2 lore raw
Quoted 15 lines · David Vrabel
Quoted 5 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

---

Quoted 8 lines

Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?

Quoted 3 lines

This looks like a good idea but I would only have one Xen option. There are so few options that only apply to dom0 that it doesn't make sense to have a dom0 option.

FWIW I agree. Having done that though, what about combining it with kvmconfig to make virtconfig or something?

Ian.

#3 lore raw
Quoted 2 lines · Ian Campbell

FWIW I agree. Having done that though, what about combining it with kvmconfig to make virtconfig or something?

Sure, as a separate new config, yeah I think it would be helpful so long as we can combine two config inputs so that burden maintenance is not shared.

Luis

#4 lore raw
Quoted 7 lines · Luis R. Rodriguez
Quoted 2 lines · Ian Campbell

FWIW I agree. Having done that though, what about combining it with kvmconfig to make virtconfig or something?

Sure, as a separate new config, yeah I think it would be helpful so long as we can combine two config inputs so that burden maintenance is not shared.

BTW, I really meant this as a question to the x86 maintainers, or whoever is responsible for the kvmconfig thing, but I hadn't noticed that this patch only went to xen-devel and not the kernel lists. You'll probably want to get some sort of consensus there before pressing ahead with the merge.

Ian.

#5 lore raw
In reply to David Vrabel
Quoted 15 lines · David Vrabel
Quoted 5 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

---

Quoted 8 lines

Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?

Quoted 3 lines

This looks like a good idea but I would only have one Xen option. There are so few options that only apply to dom0 that it doesn't make sense to have a dom0 option.

OK thanks for the feedback I've merged them.

Quoted 4 lines

arch/x86/configs/xen_dom0.config

Quoted 2 lines
arch/x86/configs/xen_dom0.config new file +0 -0

Make this xen.config

Done.

Quoted 7 lines
Quoted 7 lines
arch/x86/configs/xen_dom0.config new file +6 -0
@@ -0,0 +1,37 @@
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
Quoted 8 lines

arch/x86/configs/xen_dom0.config line 12

Quoted 6 lines
arch/x86/configs/xen_dom0.config new file +6 -0
+CONFIG_XEN_PVH=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_NETXEN_NIC=m

Remove this as it isn't a Xen related option, but an ethernet driver.

OK.

Quoted 8 lines

arch/x86/configs/xen_dom0.config line 18

Quoted 6 lines
arch/x86/configs/xen_dom0.config new file +6 -0
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_TCG_XEN is not set

Enable as a module.

Done.

Luis

#6 lore raw
In reply to Luis R. Rodriguez
Quoted 88 lines · Luis R. Rodriguez

From: "Luis R. Rodriguez" <[email protected]>

---

Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?

Please note that since this is going upstream it makes no sense to add things which are not upstream though.

Thanks,

Luis

 arch/x86/Makefile                 | 12 ++++++++++++
 arch/x86/configs/xen_dom0.config  | 37 +++++++++++++++++++++++++++++++++++++
 arch/x86/configs/xen_guest.config | 37 +++++++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+)
 create mode 100644 arch/x86/configs/xen_dom0.config
 create mode 100644 arch/x86/configs/xen_guest.config
arch/x86/Makefile +12 -0
index 33f71b0..8b2bada 100644
@@ -256,6 +256,16 @@ kvmconfig:
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/kvm_guest.config
 	$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
 
+xendom0config:
+	$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_dom0.config
+	$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+
+xenguestconfig:
+	$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_guest.config
+	$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+
 define archhelp
   echo  '* bzImage      - Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install      - Install kernel using'
@@ -270,4 +280,6 @@ define archhelp
   echo  '                  FDARGS="..."  arguments for the booted kernel'
   echo  '                  FDINITRD=file initrd for the booted kernel'
   echo  '  kvmconfig	- Enable additional options for guest kernel support'
+  echo  '  xendom0config  - Enable additional options for xen dom0 kernel support'
+  echo  '  xenguestconfig - Enable additional options for xen guest kernel support'
 endef
arch/x86/configs/xen_dom0.config new file +26 -0
new file mode 100644
index 0000000..3f155e0
@@ -0,0 +1,37 @@
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
+CONFIG_XEN_PVH=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_NETXEN_NIC=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_TCG_XEN is not set
+CONFIG_XEN_WDT=m
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m

arch/x86/configs/xen_dom0.config line 36

Quoted 10 lines
arch/x86/configs/xen_dom0.config new file +10 -0
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_PRIVCMD=m
+CONFIG_XEN_ACPI_PROCESSOR=m
+# CONFIG_XEN_MCE_LOG is not set

Probably want that on.

Quoted 52 lines
arch/x86/configs/xen_dom0.config new file +1 -0
+CONFIG_XEN_HAVE_PVMMU=y
arch/x86/configs/xen_guest.config new file +37 -0
new file mode 100644
index 0000000..3f155e0
@@ -0,0 +1,37 @@
+CONFIG_XEN=y
+CONFIG_XEN_DOM0=y
+CONFIG_XEN_PVHVM=y
+CONFIG_XEN_MAX_DOMAIN_MEMORY=500
+CONFIG_XEN_SAVE_RESTORE=y
+# CONFIG_XEN_DEBUG_FS is not set
+CONFIG_XEN_PVH=y
+CONFIG_PCI_XEN=y
+CONFIG_XEN_PCIDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_FRONTEND=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_NETXEN_NIC=m
+CONFIG_XEN_NETDEV_FRONTEND=m
+CONFIG_XEN_NETDEV_BACKEND=m
+CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
+CONFIG_HVC_XEN=y
+CONFIG_HVC_XEN_FRONTEND=y
+# CONFIG_TCG_XEN is not set
+CONFIG_XEN_WDT=m
+CONFIG_XEN_FBDEV_FRONTEND=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XEN_DEV_EVTCHN=m
+CONFIG_XEN_BACKEND=y
+CONFIG_XENFS=m
+CONFIG_XEN_COMPAT_XENFS=y
+CONFIG_XEN_SYS_HYPERVISOR=y
+CONFIG_XEN_XENBUS_FRONTEND=y
+CONFIG_XEN_GNTDEV=m
+CONFIG_XEN_GRANT_DEV_ALLOC=m
+CONFIG_SWIOTLB_XEN=y
+CONFIG_XEN_PCIDEV_BACKEND=m
+CONFIG_XEN_PRIVCMD=m
+CONFIG_XEN_ACPI_PROCESSOR=m
+# CONFIG_XEN_MCE_LOG is not set
+CONFIG_XEN_HAVE_PVMMU=y
Signature · 7 lines
2.0.0.rc3.18.g00a5b79


_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel
#7 lore raw
Quoted 4 lines · Konrad Rzeszutek Wilk
Quoted 1 line · Luis R. Rodriguez

+# CONFIG_XEN_MCE_LOG is not set

Probably want that on.

Enabled.

Luis