x86, platform, xen, kconfig: add xen defconfig helpers
RFC 1/1 x86, platform, xen, kconfig: add xen defconfig helpers
From: "Luis R. Rodriguez" <[email protected]>
---
Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?
Please note that since this is going upstream it makes no sense to add things which are not upstream though.
Thanks,
Luis
arch/x86/Makefile | 12 ++++++++++++ arch/x86/configs/xen_dom0.config | 37 +++++++++++++++++++++++++++++++++++++ arch/x86/configs/xen_guest.config | 37 +++++++++++++++++++++++++++++++++++++ 3 files changed, 86 insertions(+) create mode 100644 arch/x86/configs/xen_dom0.config create mode 100644 arch/x86/configs/xen_guest.config
arch/x86/Makefile +12 -0
@@ -256,6 +256,16 @@ kvmconfig: $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/kvm_guest.config $(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig +xendom0config: + $(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target)) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_dom0.config + $(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig + +xenguestconfig: + $(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target)) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_guest.config + $(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig + define archhelp echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' echo ' install - Install kernel using'
@@ -270,4 +280,6 @@ define archhelp echo ' FDARGS="..." arguments for the booted kernel' echo ' FDINITRD=file initrd for the booted kernel' echo ' kvmconfig - Enable additional options for guest kernel support' + echo ' xendom0config - Enable additional options for xen dom0 kernel support' + echo ' xenguestconfig - Enable additional options for xen guest kernel support' endef
arch/x86/configs/xen_dom0.config new file +37 -0
@@ -0,0 +1,37 @@ +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_NETXEN_NIC=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_TCG_XEN is not set +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_ACPI_PROCESSOR=m +# CONFIG_XEN_MCE_LOG is not set +CONFIG_XEN_HAVE_PVMMU=y
arch/x86/configs/xen_guest.config new file +37 -0
@@ -0,0 +1,37 @@ +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_NETXEN_NIC=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_TCG_XEN is not set +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_ACPI_PROCESSOR=m +# CONFIG_XEN_MCE_LOG is not set +CONFIG_XEN_HAVE_PVMMU=y
Signature · 1 line
2.0.0.rc3.18.g00a5b79
Quoted 5 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
Signed-off-by Luis R. Rodriguez <[email protected]>---
Quoted 8 lines
Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?
This looks like a good idea but I would only have one Xen option. There are so few options that only apply to dom0 that it doesn't make sense to have a dom0 option.
arch/x86/configs/xen_dom0.config
Quoted 2 lines
arch/x86/configs/xen_dom0.config new file +0
-0
Make this xen.config
arch/x86/configs/xen_dom0.config line 12
Quoted 13 lines
arch/x86/configs/xen_dom0.config new file +12
-0@@ -0,0 +1,37 @@ +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_NETXEN_NIC=m
Remove this as it isn't a Xen related option, but an ethernet driver.
arch/x86/configs/xen_dom0.config line 18
Quoted 6 lines
arch/x86/configs/xen_dom0.config new file +6
-0+CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_TCG_XEN is not set
Enable as a module.
Quoted 9 lines
arch/x86/configs/xen_dom0.config new file +9
-0+CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y
arch/x86/configs/xen_dom0.config line 37
Quoted 10 lines
arch/x86/configs/xen_dom0.config new file +10
-0+CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_ACPI_PROCESSOR=m +# CONFIG_XEN_MCE_LOG is not set +CONFIG_XEN_HAVE_PVMMU=y
David
Quoted 15 lines · David Vrabel
Quoted 5 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
Signed-off-by Luis R. Rodriguez <[email protected]>---
Quoted 8 lines
Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?
Quoted 3 lines
This looks like a good idea but I would only have one Xen option. There are so few options that only apply to dom0 that it doesn't make sense to have a dom0 option.
FWIW I agree. Having done that though, what about combining it with kvmconfig to make virtconfig or something?
Ian.
Quoted 2 lines · Ian Campbell
FWIW I agree. Having done that though, what about combining it with kvmconfig to make virtconfig or something?
Sure, as a separate new config, yeah I think it would be helpful so long as we can combine two config inputs so that burden maintenance is not shared.
Luis
Quoted 7 lines · Luis R. Rodriguez
Quoted 2 lines · Ian Campbell
FWIW I agree. Having done that though, what about combining it with kvmconfig to make virtconfig or something?
Sure, as a separate new config, yeah I think it would be helpful so long as we can combine two config inputs so that burden maintenance is not shared.
BTW, I really meant this as a question to the x86 maintainers, or whoever is responsible for the kvmconfig thing, but I hadn't noticed that this patch only went to xen-devel and not the kernel lists. You'll probably want to get some sort of consensus there before pressing ahead with the merge.
Ian.
Quoted 15 lines · David Vrabel
Quoted 5 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
Signed-off-by Luis R. Rodriguez <[email protected]>---
Quoted 8 lines
Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?
Quoted 3 lines
This looks like a good idea but I would only have one Xen option. There are so few options that only apply to dom0 that it doesn't make sense to have a dom0 option.
OK thanks for the feedback I've merged them.
Quoted 4 lines
arch/x86/configs/xen_dom0.config
Quoted 2 lines
arch/x86/configs/xen_dom0.config new file +0
-0Make this xen.config
Done.
Quoted 7 lines
Quoted 7 lines
arch/x86/configs/xen_dom0.config new file +6
-0@@ -0,0 +1,37 @@ +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set
Quoted 8 lines
arch/x86/configs/xen_dom0.config line 12
Quoted 6 lines
arch/x86/configs/xen_dom0.config new file +6
-0+CONFIG_XEN_PVH=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_NETXEN_NIC=mRemove this as it isn't a Xen related option, but an ethernet driver.
OK.
Quoted 8 lines
arch/x86/configs/xen_dom0.config line 18
Quoted 6 lines
arch/x86/configs/xen_dom0.config new file +6
-0+CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_TCG_XEN is not setEnable as a module.
Done.
Luis
Quoted 88 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
Signed-off-by Luis R. Rodriguez <[email protected]>---
Hey folks, shiny kvm has a shortcut 'make kvmconfig' on the kernel, and I thought this was a good idea so wanted to add a respective helper for xen. Contrary to kvm though we can have a dom0 and a guest kernel configuration. As it is right now this patch bundles the same exact options for both, but figured folks might already have special configs for both different types. What options would we want as default *upstream* for each of these ?
Please note that since this is going upstream it makes no sense to add things which are not upstream though.
Thanks,
Luis
arch/x86/Makefile | 12 ++++++++++++ arch/x86/configs/xen_dom0.config | 37 +++++++++++++++++++++++++++++++++++++ arch/x86/configs/xen_guest.config | 37 +++++++++++++++++++++++++++++++++++++ 3 files changed, 86 insertions(+) create mode 100644 arch/x86/configs/xen_dom0.config create mode 100644 arch/x86/configs/xen_guest.configarch/x86/Makefile +12
-0@@ -256,6 +256,16 @@ kvmconfig: $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/kvm_guest.config $(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig +xendom0config: + $(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target)) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_dom0.config + $(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig + +xenguestconfig: + $(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target)) + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(srctree)/arch/x86/configs/xen_guest.config + $(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig + define archhelp echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' echo ' install - Install kernel using'@@ -270,4 +280,6 @@ define archhelp echo ' FDARGS="..." arguments for the booted kernel' echo ' FDINITRD=file initrd for the booted kernel' echo ' kvmconfig - Enable additional options for guest kernel support' + echo ' xendom0config - Enable additional options for xen dom0 kernel support' + echo ' xenguestconfig - Enable additional options for xen guest kernel support' endefarch/x86/configs/xen_dom0.config new file +26
-0@@ -0,0 +1,37 @@ +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_NETXEN_NIC=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_TCG_XEN is not set +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m
arch/x86/configs/xen_dom0.config line 36
Quoted 10 lines
arch/x86/configs/xen_dom0.config new file +10
-0+CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_ACPI_PROCESSOR=m +# CONFIG_XEN_MCE_LOG is not set
Probably want that on.
Quoted 52 lines
arch/x86/configs/xen_dom0.config new file +1
-0+CONFIG_XEN_HAVE_PVMMU=yarch/x86/configs/xen_guest.config new file +37
-0@@ -0,0 +1,37 @@ +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_NETXEN_NIC=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_TCG_XEN is not set +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_ACPI_PROCESSOR=m +# CONFIG_XEN_MCE_LOG is not set +CONFIG_XEN_HAVE_PVMMU=ySignature · 7 lines
2.0.0.rc3.18.g00a5b79 _______________________________________________ Xen-devel mailing list [email protected] http://lists.xen.org/xen-devel
Quoted 4 lines · Konrad Rzeszutek Wilk
Quoted 1 line · Luis R. Rodriguez
+#
CONFIG_XEN_MCE_LOGis not setProbably want that on.
Enabled.
Luis