0/2] x86/arm64: add xenconfig
Subsystems (5)
PATCH RESEND v3 1/1 0/2] x86/arm64: add xenconfig
From: "Luis R. Rodriguez" <[email protected]>
Resending to the maintainers that it was recommended to try. Ingo, Thomas, Andrew, who should this go through? Please note that the Kconfig maintainer is not available anymore and it was recommended this go through that person first, meanwhile while that is ironed out it was suggested I try with any of you.
Luis R. Rodriguez (2):
x86, platform, xen, kconfig: clarify kvmconfig is for kvm x86, arm, platform, xen, kconfig: add xen defconfig helper
arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 7 ++++++- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
Signature · 1 line
2.2.2
PATCH RESEND v3 1/1 1/2] x86, platform, xen, kconfig: clarify kvmconfig is for kvm
From: "Luis R. Rodriguez" <[email protected]>
We'll be adding options for xen as well.
--- scripts/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
@@ -141,7 +141,7 @@ help: @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - @echo ' kvmconfig - Enable additional options for guest kernel support' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2
PATCH RESEND v3 1/1 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
--- arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 41 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +10 -0
@@ -0,0 +1,10 @@ +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +26 -0
@@ -0,0 +1,26 @@ +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2
Re: [PATCH v3 RESEND] 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 7 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
Quoted 9 lines
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
This doesn't work because neither CONFIG_HYPERVISOR_GUEST in arch/x86/configs/xen.config nor CONFIG_PARAVIRT in kernel/configs/xen.config get enabled.
make kvmconfig does this appropriately.
You can test this with make {allno,def}config; make xenconfig. Notice there's no difference with your patchset.
Re: [PATCH v3 RESEND] 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
Quoted 19 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
Quoted 9 lines
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Quoted 8 lines
This doesn't work because neither
CONFIG_HYPERVISOR_GUESTinarch/x86/configs/xen.confignorCONFIG_PARAVIRTinkernel/configs/xen.configget enabled.make kvmconfig does this appropriately.
You can test this with make {allno,def}config; make xenconfig. Notice there's no difference with your patchset.
Thanks, I'll fix.
Luis
Re: [PATCH v3 RESEND] 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to David RientjesQuoted 19 lines · David Rientjes
Quoted 7 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
Quoted 9 lines
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
Quoted 8 lines
This doesn't work because neither
CONFIG_HYPERVISOR_GUESTinarch/x86/configs/xen.confignorCONFIG_PARAVIRTinkernel/configs/xen.configget enabled.make kvmconfig does this appropriately.
You can test this with make {allno,def}config; make xenconfig. Notice there's no difference with your patchset.
Thanks, I'll fix.
Luis
Re: [PATCH v3 RESEND] 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezQuoted 7 lines · Luis R. Rodriguez
From: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
Quoted 9 lines
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
This doesn't work because neither CONFIG_HYPERVISOR_GUEST in arch/x86/configs/xen.config nor CONFIG_PARAVIRT in kernel/configs/xen.config get enabled.
make kvmconfig does this appropriately.
You can test this with make {allno,def}config; make xenconfig. Notice there's no difference with your patchset.
PATCH RESEND v3 1/1 1/2] x86, platform, xen, kconfig: clarify kvmconfig is for kvm
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
We'll be adding options for xen as well.
--- scripts/kconfig/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kconfig/Makefile +1 -1
@@ -141,7 +141,7 @@ help: @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - @echo ' kvmconfig - Enable additional options for guest kernel support' + @echo ' kvmconfig - Enable additional options for kvm guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2
PATCH RESEND v3 1/1 2/2] x86, arm, platform, xen, kconfig: add xen defconfig helper
In reply to Luis R. RodriguezFrom: "Luis R. Rodriguez" <[email protected]>
This lets you build a kernel which can support xen dom0 or xen guests by just using:
make xenconfig
on both x86 and arm64 kernels. This also splits out the options which are available currently to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest kernel configuration but upon review with the xen team since we don't have many dom0 options its best to just combine these two into one.
--- arch/x86/configs/xen.config | 10 ++++++++++ kernel/configs/xen.config | 26 ++++++++++++++++++++++++++ scripts/kconfig/Makefile | 5 +++++ 3 files changed, 41 insertions(+) create mode 100644 arch/x86/configs/xen.config create mode 100644 kernel/configs/xen.config
arch/x86/configs/xen.config new file +10 -0
@@ -0,0 +1,10 @@ +# x86 xen specific config options +CONFIG_XEN_PVHVM=y +CONFIG_XEN_MAX_DOMAIN_MEMORY=500 +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +CONFIG_XEN_PVH=y +CONFIG_XEN_MCE_LOG=y +CONFIG_PCI_XEN=y +CONFIG_XEN_PCIDEV_FRONTEND=m +CONFIG_XEN_ACPI_PROCESSOR=m
kernel/configs/xen.config new file +26 -0
@@ -0,0 +1,26 @@ +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_XEN_WDT=m +CONFIG_XEN_FBDEV_FRONTEND=y +CONFIG_XEN_BALLOON=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PCIDEV_BACKEND=m +CONFIG_XEN_PRIVCMD=m
scripts/kconfig/Makefile +5 -0
@@ -117,6 +117,10 @@ PHONY += kvmconfig kvmconfig: $(call mergeconfig,kvm_guest) +PHONY += xenconfig +xenconfig: + $(call mergeconfig,xen) + PHONY += tinyconfig tinyconfig: allnoconfig $(call mergeconfig,tiny)
@@ -142,6 +146,7 @@ help: @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' @echo ' kvmconfig - Enable additional options for kvm guest kernel support' + @echo ' xenconfig - Enable additional options for xen dom0 and guest kernel support' @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff
Signature · 1 line
2.2.2