Skip to contentSkip to conversation

ARM: DRA7: Change configuration to prevent DDR reset control from EMIF

PATCH In review Nishanth Menon 2 participants 3 messages Jun 16, 2015 – Jun 19, 2015 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: DRA7: Change configuration to prevent DDR reset control from EMIF

DRA7/AM57xx devices can be operated in many different configurations. When the SoC is supposed to support a configuration where low power mode state may involve the SoC completely powered off and DDR is in self refresh, SoC EMIF controller should not be the master of the reset signal and an external entity might be in control of things.

The default configuration of Linux on TI evms involve not powering off the voltage rails (due to various reasons including reliability concerns) and must not allow DDR reset to be controlled by EMIF. On platforms where external entity might control the reset signal, this configuration will be a "dont care".

Fixes 536d87470869 ("ARM: DRA7: Update DDR IO registers")

---

Based on master b48b69ba10fd Merge git://git.denx.de/u-boot-marvell

 arch/arm/cpu/armv7/omap5/hw_data.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/cpu/armv7/omap5/hw_data.c +4 -4
index f1a59a3ca918..3a723cace71a 100644
@@ -602,8 +602,8 @@ const struct ctrl_ioregs ioregs_dra7xx_es1 = {
 	.ctrl_ddrio_0 = 0x00094A40,
 	.ctrl_ddrio_1 = 0x04A52000,
 	.ctrl_ddrio_2 = 0x84210000,
-	.ctrl_emif_sdram_config_ext = 0x0001C127,
-	.ctrl_emif_sdram_config_ext_final = 0x0001C127,
+	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
+	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
 	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
 };
 
@@ -614,8 +614,8 @@ const struct ctrl_ioregs ioregs_dra72x_es1 = {
 	.ctrl_ddrio_0 = 0x00094A40,
 	.ctrl_ddrio_1 = 0x04A52000,
 	.ctrl_ddrio_2 = 0x84210000,
-	.ctrl_emif_sdram_config_ext = 0x0001C127,
-	.ctrl_emif_sdram_config_ext_final = 0x0001C127,
+	.ctrl_emif_sdram_config_ext = 0x0001C1A7,
+	.ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
 	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
 };
 
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 ARM: DRA7: Change configuration to prevent DDR reset control from EMIF

Quoted 12 lines · Nishanth Menon

DRA7/AM57xx devices can be operated in many different configurations. When the SoC is supposed to support a configuration where low power mode state may involve the SoC completely powered off and DDR is in self refresh, SoC EMIF controller should not be the master of the reset signal and an external entity might be in control of things.

The default configuration of Linux on TI evms involve not powering off the voltage rails (due to various reasons including reliability concerns) and must not allow DDR reset to be controlled by EMIF. On platforms where external entity might control the reset signal, this configuration will be a "dont care".

Quoted 4 lines
Fixes 536d87470869 ("ARM: DRA7: Update DDR IO registers")
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150616/6a4dd2c2/attachment.sig>
#2 lore raw
In reply to Nishanth Menon
Quoted 12 lines · Nishanth Menon

DRA7/AM57xx devices can be operated in many different configurations. When the SoC is supposed to support a configuration where low power mode state may involve the SoC completely powered off and DDR is in self refresh, SoC EMIF controller should not be the master of the reset signal and an external entity might be in control of things.

The default configuration of Linux on TI evms involve not powering off the voltage rails (due to various reasons including reliability concerns) and must not allow DDR reset to be controlled by EMIF. On platforms where external entity might control the reset signal, this configuration will be a "dont care".

Quoted 5 lines
Fixes 536d87470869 ("ARM: DRA7: Update DDR IO registers")

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150619/b6b89109/attachment.sig>