ARM: DRA7: Change configuration to prevent DDR reset control from EMIF
PATCH 1/1 ARM: DRA7: Change configuration to prevent DDR reset control from EMIF
DRA7/AM57xx devices can be operated in many different configurations. When the SoC is supposed to support a configuration where low power mode state may involve the SoC completely powered off and DDR is in self refresh, SoC EMIF controller should not be the master of the reset signal and an external entity might be in control of things.
The default configuration of Linux on TI evms involve not powering off the voltage rails (due to various reasons including reliability concerns) and must not allow DDR reset to be controlled by EMIF. On platforms where external entity might control the reset signal, this configuration will be a "dont care".
---
Based on master b48b69ba10fd Merge git://git.denx.de/u-boot-marvell
arch/arm/cpu/armv7/omap5/hw_data.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm/cpu/armv7/omap5/hw_data.c +4 -4
@@ -602,8 +602,8 @@ const struct ctrl_ioregs ioregs_dra7xx_es1 = { .ctrl_ddrio_0 = 0x00094A40, .ctrl_ddrio_1 = 0x04A52000, .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C127, - .ctrl_emif_sdram_config_ext_final = 0x0001C127, + .ctrl_emif_sdram_config_ext = 0x0001C1A7, + .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, .ctrl_ddr_ctrl_ext_0 = 0xA2000000, };
@@ -614,8 +614,8 @@ const struct ctrl_ioregs ioregs_dra72x_es1 = { .ctrl_ddrio_0 = 0x00094A40, .ctrl_ddrio_1 = 0x04A52000, .ctrl_ddrio_2 = 0x84210000, - .ctrl_emif_sdram_config_ext = 0x0001C127, - .ctrl_emif_sdram_config_ext_final = 0x0001C127, + .ctrl_emif_sdram_config_ext = 0x0001C1A7, + .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, .ctrl_ddr_ctrl_ext_0 = 0xA2000000, };
Signature · 1 line
1.7.9.5
PATCH 1/1 ARM: DRA7: Change configuration to prevent DDR reset control from EMIF
Quoted 12 lines · Nishanth Menon
DRA7/AM57xx devices can be operated in many different configurations. When the SoC is supposed to support a configuration where low power mode state may involve the SoC completely powered off and DDR is in self refresh, SoC EMIF controller should not be the master of the reset signal and an external entity might be in control of things.
The default configuration of Linux on TI evms involve not powering off the voltage rails (due to various reasons including reliability concerns) and must not allow DDR reset to be controlled by EMIF. On platforms where external entity might control the reset signal, this configuration will be a "dont care".
Quoted 4 lines
Fixes 536d87470869 ("ARM: DRA7: Update DDR IO registers")Tested-by Keerthy <[email protected]>Acked-by Brad Griffis <[email protected]>Signed-off-by Nishanth Menon <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150616/6a4dd2c2/attachment.sig>
Quoted 12 lines · Nishanth Menon
DRA7/AM57xx devices can be operated in many different configurations. When the SoC is supposed to support a configuration where low power mode state may involve the SoC completely powered off and DDR is in self refresh, SoC EMIF controller should not be the master of the reset signal and an external entity might be in control of things.
The default configuration of Linux on TI evms involve not powering off the voltage rails (due to various reasons including reliability concerns) and must not allow DDR reset to be controlled by EMIF. On platforms where external entity might control the reset signal, this configuration will be a "dont care".
Quoted 5 lines
Fixes 536d87470869 ("ARM: DRA7: Update DDR IO registers")Tested-by Keerthy <[email protected]>Acked-by Brad Griffis <[email protected]>Signed-off-by Nishanth Menon <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150619/b6b89109/attachment.sig>