drm/amdgpu: update documentation for amdgpu_drv.c
Subsystems (4)
PATCH v2 1/1 drm/amdgpu: update documentation for amdgpu_drv.c
--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 222 +++++++++++++++++++++++++++++++- 2 files changed, 222 insertions(+), 7 deletions(-)
Documentation/gpu/amdgpu.rst +7 -0
@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core Next (GCN) architecture. +Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +215 -7
397 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
A message that is not in the archive (sent off-list or not yet received): 1530648395-17495-1-git-send-email-sonny.jiang-5C7GfCeVMHo@public.gmane.org
Zhang, Jerry (Junwei)
Acked-by Junwei ZhangQuoted 1 line · Sonny Jiang
Signed-off-by Sonny Jiang <[email protected]>
Quoted 420 lines
--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 222 +++++++++++++++++++++++++++++++- 2 files changed, 222 insertions(+), 7 deletions(-)Documentation/gpu/amdgpu.rst +7
-0@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core Next (GCN) architecture. +Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +210
-7@@ -1,10 +1,3 @@ -/** -* \file amdgpu_drv.c -* AMD Amdgpu driver -* -* \author Gareth Hughes <[email protected]> -*/ -/* * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. @@ -136,102 +129,235 @@ int amdgpu_gpu_recovery = -1; /* auto */int amdgpu_emu_mode =0 ;uint amdgpu_smu_memory_pool_size =0 ; +/** +* DOC: vramlimit (int) +* Restrict the total amount of VRAM in MiB for testing. The default is 0 (Use full VRAM). +*/ MODULE_PARM_DESC (vramlimit,"Restrict VRAM for testing, in megabytes" );module_param_named (vramlimit, amdgpu_vram_limit, int,0600 ); +/** +* DOC: vis_vramlimit (int) +* Restrict the amount of CPU visible VRAM in MiB for testing. The default is 0 (Use full CPU visible VRAM). +*/ MODULE_PARM_DESC (vis_vramlimit,"Restrict visible VRAM for testing, in megabytes" );module_param_named (vis_vramlimit, amdgpu_vis_vram_limit, int,0444 ); +/** +* DOC: gartsize (uint) +* Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic). +*/ MODULE_PARM_DESC (gartsize,"Size of GART to setup in megabytes (32, 64, etc., -1=auto)" );module_param_named (gartsize, amdgpu_gart_size, uint,0600 ); +/** +* DOC: gttsize (int) +* Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM, +* otherwise 3/4 RAM size). +*/ MODULE_PARM_DESC (gttsize,"Size of the GTT domain in megabytes (-1 = auto)" );module_param_named (gttsize, amdgpu_gtt_size, int,0600 ); +/** +* DOC: moverate (int) +* Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s). +*/ MODULE_PARM_DESC (moverate,"Maximum buffer migration rate in MB/s. (32, 64, etc., -1=auto, 0=1=disabled)" );module_param_named (moverate, amdgpu_moverate, int,0600 ); +/** +* DOC: benchmark (int) +* Run benchmarks. The default is 0 (Skip benchmarks). +*/ MODULE_PARM_DESC (benchmark,"Run benchmark" );module_param_named (benchmark, amdgpu_benchmarking, int,0444 ); +/** +* DOC: test (int) +* Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test). +*/ MODULE_PARM_DESC (test,"Run tests" );module_param_named (test, amdgpu_testing, int,0444 ); +/** +* DOC: audio (int) +* Set Audio. The default is -1 (Enabled), set 0 to disabled it. +*/ MODULE_PARM_DESC (audio,"Audio enable (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (audio, amdgpu_audio, int,0444 ); +/** +* DOC: disp_priority (int) +* Set display Priority (0 = auto, 1 = normal, 2 = high). The default is 0. +*/ MODULE_PARM_DESC (disp_priority,"Display Priority (0 = auto, 1 = normal, 2 = high)" );module_param_named (disp_priority, amdgpu_disp_priority, int,0444 ); +/** +* DOC: hw_i2c (int) +* To enable hw i2c engine. The default is 0 (Disabled). +*/ MODULE_PARM_DESC (hw_i2c,"hw i2c engine enable (0 = disable)" );module_param_named (hw_i2c, amdgpu_hw_i2c, int,0444 ); +/** +* DOC: pcie_gen2 (int) +* To disable PCIE Gen2 mode (0 = disable, 1 = enable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (pcie_gen2,"PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (pcie_gen2, amdgpu_pcie_gen2, int,0444 ); +/** +* DOC: msi (int) +* To disable MSI functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (msi,"MSI support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (msi, amdgpu_msi, int,0444 ); +/** +* DOC: lockup_timeout (int) +* Set GPU scheduler timeout value in ms. It must be > 0. The default is 10000. +*/ MODULE_PARM_DESC (lockup_timeout,"GPU lockup timeout in ms > 0 (default 10000)" );module_param_named (lockup_timeout, amdgpu_lockup_timeout, int,0444 ); +/** +* DOC: dpm (int) +* Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto). +*/ MODULE_PARM_DESC (dpm,"DPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (dpm, amdgpu_dpm, int,0444 ); +/** +* DOC: fw_load_type (int) +* Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto). +*/ MODULE_PARM_DESC (fw_load_type,"firmware loading type (0 = direct, 1 = SMU, 2 = PSP, -1 = auto)" );module_param_named (fw_load_type, amdgpu_fw_load_type, int,0444 ); +/** +* DOC: aspm (int) +* To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (aspm,"ASPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (aspm, amdgpu_aspm, int,0444 ); +/** +* DOC: runpm (int) +* Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down +* the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality. +*/ MODULE_PARM_DESC (runpm,"PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default)" );module_param_named (runpm, amdgpu_runtime_pm, int,0444 ); +/** +* DOC: ip_block_mask (uint) +* Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, etc.). +* Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index (e.g., you might have a device +* with multiple instances of an IP block) so the mask is board specific. The default is 0xffffffff (enable all blocks on a device). +*/ MODULE_PARM_DESC (ip_block_mask,"IP Block Mask (all blocks enabled (default))" );module_param_named (ip_block_mask, amdgpu_ip_block_mask, uint,0444 ); +/** +* DOC: bapm (int) +* To disable BAPM (0 = disable). The default -1 (auto, enabled) +*/ MODULE_PARM_DESC (bapm,"BAPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (bapm, amdgpu_bapm, int,0444 ); +/** +* DOC: deep_color (int) +* Set 1 to enable Deep Color support. The default is 0 (disabled). +*/ MODULE_PARM_DESC (deep_color,"Deep Color support (1 = enable, 0 = disable (default))" );module_param_named (deep_color, amdgpu_deep_color, int,0444 ); +/** +* DOC: vm_size (int) +* Override the size of the GPU's per client virtual address space in GiB. The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_size,"VM address space size in gigabytes (default 64GB)" );module_param_named (vm_size, amdgpu_vm_size, int,0444 ); +/** +* DOC: vm_fragment_size (int) +* Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_fragment_size,"VM fragment size in bits (4, 5, etc. 4 = 64K (default), Max 9 = 2M)" );module_param_named (vm_fragment_size, amdgpu_vm_fragment_size, int,0444 ); +/** +* DOC: vm_block_size (int) +* Override VM page table size in bits (default depending on vm_size and hw setup). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_block_size,"VM page table size in bits (default depending on vm_size)" );module_param_named (vm_block_size, amdgpu_vm_block_size, int,0444 ); +/** +* DOC: vm_fault_stop (int) +* Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop). +*/ MODULE_PARM_DESC (vm_fault_stop,"Stop on VM fault (0 = never (default), 1 = print first, 2 = always)" );module_param_named (vm_fault_stop, amdgpu_vm_fault_stop, int,0444 ); +/** +* DOC: vm_debug (int) +* Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled). +*/ MODULE_PARM_DESC (vm_debug,"Debug VM handling (0 = disabled (default), 1 = enabled)" );module_param_named (vm_debug, amdgpu_vm_debug, int,0644 ); +/** +* DOC: vm_update_mode (int) +* Override VM update mode. VM updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default +* is -1 (Only in large BAR(LB) systems Compute VM tables will be updated by CPU, otherwise 0, never). +*/ MODULE_PARM_DESC (vm_update_mode,"VM update using CPU (0 = never (default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both" );module_param_named (vm_update_mode, amdgpu_vm_update_mode, int,0444 ); +/** +* DOC: vram_page_split (int) +* Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512. +*/ MODULE_PARM_DESC (vram_page_split,"Number of pages after we split VRAM allocations (default 512, -1 = disable)" );module_param_named (vram_page_split, amdgpu_vram_page_split, int,0444 ); +/** +* DOC: exp_hw_support (int) +* Enable experimental hw support (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (exp_hw_support,"experimental hw support (1 = enable, 0 = disable (default))" );module_param_named (exp_hw_support, amdgpu_exp_hw_support, int,0444 ); +/** +* DOC: dc (int) +* Disable/Enable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (dc,"Display Core driver (1 = enable, 0 = disable, -1 = auto (default))" );module_param_named (dc, amdgpu_dc, int,0444 );MODULE_PARM_DESC (dc_log,"Display Core Log Level (0 = minimal (default), 1 = chatty" );module_param_named (dc_log, amdgpu_dc_log, int,0444 ); +/** +* DOC: sched_jobs (int) +* Override the max number of jobs supported in the sw queue. The default is 32. +*/ MODULE_PARM_DESC (sched_jobs,"the max number of jobs supported in the sw queue (default 32)" );module_param_named (sched_jobs, amdgpu_sched_jobs, int,0444 ); +/** +* DOC: sched_hw_submission (int) +* Override the max number of HW submissions. The default is 2. +*/ MODULE_PARM_DESC (sched_hw_submission,"the max number of HW submissions (default 2)" );module_param_named (sched_hw_submission, amdgpu_sched_hw_submission, int,0444 ); +/** +* DOC: ppfeaturemask (uint) +* Override what power features are enabled. The default is 0xffff3fff (gfxoff(bit 15), overdriver(bit 14) disabled). +*/ MODULE_PARM_DESC (ppfeaturemask,"all power features enabled (default))" );module_param_named (ppfeaturemask, amdgpu_pp_feature_mask, uint,0444 );@@ -241,58 +367,129 @@ module_param_named(no_evict, amdgpu_no_evict, int, 0444);MODULE_PARM_DESC (direct_gma_size,"Direct GMA size in megabytes (max 96MB)" );module_param_named (direct_gma_size, amdgpu_direct_gma_size, int,0444 ); +/** +* DOC: pcie_gen_cap (uint) +* Override PCIE gen speed capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_gen_cap,"PCIE Gen Caps (0: autodetect (default))" );module_param_named (pcie_gen_cap, amdgpu_pcie_gen_cap, uint,0444 ); +/** +* DOC: pcie_lane_cap (uint) +* Override PCIE lanes capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_lane_cap,"PCIE Lane Caps (0: autodetect (default))" );module_param_named (pcie_lane_cap, amdgpu_pcie_lane_cap, uint,0444 ); +/** +* DOC: cg_mask (uint) +* Override what Clockgating features are enabled on GPU (0 = disable clock gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (cg_mask,"Clockgating flags mask (0 = disable clock gating)" );module_param_named (cg_mask, amdgpu_cg_mask, uint,0444 ); +/** +* DOC: pg_mask (uint) +* Override what Powergating features are enabled on GPU (0 = disable power gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (pg_mask,"Powergating flags mask (0 = disable power gating)" );module_param_named (pg_mask, amdgpu_pg_mask, uint,0444 ); +/** +* DOC: sdma_phase_quantum (uint) +* Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32. +*/ MODULE_PARM_DESC (sdma_phase_quantum,"SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change (default 32))" );module_param_named (sdma_phase_quantum, amdgpu_sdma_phase_quantum, uint,0444 ); +/** +* DOC: disable_cu (charp) +* Set to disable CUs (It's set like se.sh.cu,...). The default is NULL. +*/ MODULE_PARM_DESC (disable_cu,"Disable CUs (se.sh.cu,...)" );module_param_named (disable_cu, amdgpu_disable_cu, charp,0444 ); +/** +* DOC: virtual_display (charp) +* Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards +* or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. The default is NULL. +*/ MODULE_PARM_DESC (virtual_display,"Enable virtual display feature (the virtual_display will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x)" );module_param_named (virtual_display, amdgpu_virtual_display, charp,0444 ); +/** +* DOC: ngg (int) +* Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (ngg,"Next Generation Graphics (1 = enable, 0 = disable(default depending on gfx))" );module_param_named (ngg, amdgpu_ngg, int,0444 ); +/** +* DOC: prim_buf_per_se (int) +* Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (prim_buf_per_se,"the size of Primitive Buffer per Shader Engine (default depending on gfx)" );module_param_named (prim_buf_per_se, amdgpu_prim_buf_per_se, int,0444 ); +/** +* DOC: pos_buf_per_se (int) +* Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (pos_buf_per_se,"the size of Position Buffer per Shader Engine (default depending on gfx)" );module_param_named (pos_buf_per_se, amdgpu_pos_buf_per_se, int,0444 ); +/** +* DOC: cntl_sb_buf_per_se (int) +* Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (cntl_sb_buf_per_se,"the size of Control Sideband per Shader Engine (default depending on gfx)" );module_param_named (cntl_sb_buf_per_se, amdgpu_cntl_sb_buf_per_se, int,0444 ); +/** +* DOC: param_buf_per_se (int) +* Override the size of Off-Chip Pramater Cache per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (param_buf_per_se,"the size of Off-Chip Pramater Cache per Shader Engine (default depending on gfx)" );module_param_named (param_buf_per_se, amdgpu_param_buf_per_se, int,0444 ); +/** +* DOC: job_hang_limit (int) +* Set how much time allow a job hang and not drop it. The default is 0. +*/ MODULE_PARM_DESC (job_hang_limit,"how much time allow a job hang and not drop it (default 0)" );module_param_named (job_hang_limit, amdgpu_job_hang_limit, int ,0444 ); +/** +* DOC: lbpw (int) +* Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (lbpw,"Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (lbpw, amdgpu_lbpw, int,0444 );MODULE_PARM_DESC (compute_multipipe,"Force compute queues to be spread across pipes (1 = enable, 0 = disable, -1 = auto)" );module_param_named (compute_multipipe, amdgpu_compute_multipipe, int,0444 ); +/** +* DOC: gpu_recovery (int) +* Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV). +*/ MODULE_PARM_DESC (gpu_recovery,"Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)" );module_param_named (gpu_recovery, amdgpu_gpu_recovery, int,0444 ); +/** +* DOC: emu_mode (int) +* Set value 1 to enable emulation mode. The default is 0 (disabled). +*/ MODULE_PARM_DESC (emu_mode,"Emulation mode, (1 = enable, 0 = disable)" );module_param_named (emu_mode, amdgpu_emu_mode, int,0444 ); +/** +* DOC: si_support (int) +* Set SI support driver. This parameter works after set config CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_SI #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -306,6 +503,12 @@ MODULE_PARM_DESC(si_support, "SI support (1 = enabled (default), 0 = disabled)")module_param_named (si_support, amdgpu_si_support, int,0444 );#endif +/** +* DOC: cik_support (int) +* Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_CIK #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -319,6 +522,11 @@ MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled)module_param_named (cik_support, amdgpu_cik_support, int,0444 );
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled) · line 532
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +5
-0#endif +/** +* DOC: smu_memory_pool_size (uint) +* It is used to reserve gtt for smu debug usage, setting value 0 to disable it. The actual size is value * 256MiB. +* E.g. 0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte. The default is 0 (disabled). +*/ MODULE_PARM_DESC (smu_memory_pool_size,"reserve gtt for smu debug usage, 0 = disable," "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte" );
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
A message that is not in the archive (sent off-list or not yet received): [email protected]
Qu, Jim
Acked-by Junwei ZhangI always confuse any bits definiation about some feature mask. such as ip_block_mask, pg_mask, cg_mask, pp_feature_mask. I think other people who is not familiar with amdgpu driver may have the same problem.
So, is it possible to detail every bit mask of features?
Thanks
JimQu
________________________________________
发件人: amd-gfx <[email protected]> 代表 Zhang, Jerry (Junwei) <[email protected]> 发送时间: 2018年7月4日 12:57:01
收件人: Jiang, Sonny; [email protected]
主题: Re: [PATCH v2] drm/amdgpu: update documentation for amdgpu_drv.c
Quoted 1 line · Sonny Jiang
Signed-off-by Sonny Jiang <[email protected]>
Quoted 420 lines
--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 222 +++++++++++++++++++++++++++++++- 2 files changed, 222 insertions(+), 7 deletions(-)Documentation/gpu/amdgpu.rst +7
-0@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core Next (GCN) architecture. +Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +210
-7@@ -1,10 +1,3 @@ -/** -* \file amdgpu_drv.c -* AMD Amdgpu driver -* -* \author Gareth Hughes <[email protected]> -*/ -/* * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. @@ -136,102 +129,235 @@ int amdgpu_gpu_recovery = -1; /* auto */int amdgpu_emu_mode =0 ;uint amdgpu_smu_memory_pool_size =0 ; +/** +* DOC: vramlimit (int) +* Restrict the total amount of VRAM in MiB for testing. The default is 0 (Use full VRAM). +*/ MODULE_PARM_DESC (vramlimit,"Restrict VRAM for testing, in megabytes" );module_param_named (vramlimit, amdgpu_vram_limit, int,0600 ); +/** +* DOC: vis_vramlimit (int) +* Restrict the amount of CPU visible VRAM in MiB for testing. The default is 0 (Use full CPU visible VRAM). +*/ MODULE_PARM_DESC (vis_vramlimit,"Restrict visible VRAM for testing, in megabytes" );module_param_named (vis_vramlimit, amdgpu_vis_vram_limit, int,0444 ); +/** +* DOC: gartsize (uint) +* Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic). +*/ MODULE_PARM_DESC (gartsize,"Size of GART to setup in megabytes (32, 64, etc., -1=auto)" );module_param_named (gartsize, amdgpu_gart_size, uint,0600 ); +/** +* DOC: gttsize (int) +* Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM, +* otherwise 3/4 RAM size). +*/ MODULE_PARM_DESC (gttsize,"Size of the GTT domain in megabytes (-1 = auto)" );module_param_named (gttsize, amdgpu_gtt_size, int,0600 ); +/** +* DOC: moverate (int) +* Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s). +*/ MODULE_PARM_DESC (moverate,"Maximum buffer migration rate in MB/s. (32, 64, etc., -1=auto, 0=1=disabled)" );module_param_named (moverate, amdgpu_moverate, int,0600 ); +/** +* DOC: benchmark (int) +* Run benchmarks. The default is 0 (Skip benchmarks). +*/ MODULE_PARM_DESC (benchmark,"Run benchmark" );module_param_named (benchmark, amdgpu_benchmarking, int,0444 ); +/** +* DOC: test (int) +* Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test). +*/ MODULE_PARM_DESC (test,"Run tests" );module_param_named (test, amdgpu_testing, int,0444 ); +/** +* DOC: audio (int) +* Set Audio. The default is -1 (Enabled), set 0 to disabled it. +*/ MODULE_PARM_DESC (audio,"Audio enable (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (audio, amdgpu_audio, int,0444 ); +/** +* DOC: disp_priority (int) +* Set display Priority (0 = auto, 1 = normal, 2 = high). The default is 0. +*/ MODULE_PARM_DESC (disp_priority,"Display Priority (0 = auto, 1 = normal, 2 = high)" );module_param_named (disp_priority, amdgpu_disp_priority, int,0444 ); +/** +* DOC: hw_i2c (int) +* To enable hw i2c engine. The default is 0 (Disabled). +*/ MODULE_PARM_DESC (hw_i2c,"hw i2c engine enable (0 = disable)" );module_param_named (hw_i2c, amdgpu_hw_i2c, int,0444 ); +/** +* DOC: pcie_gen2 (int) +* To disable PCIE Gen2 mode (0 = disable, 1 = enable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (pcie_gen2,"PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (pcie_gen2, amdgpu_pcie_gen2, int,0444 ); +/** +* DOC: msi (int) +* To disable MSI functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (msi,"MSI support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (msi, amdgpu_msi, int,0444 ); +/** +* DOC: lockup_timeout (int) +* Set GPU scheduler timeout value in ms. It must be > 0. The default is 10000. +*/ MODULE_PARM_DESC (lockup_timeout,"GPU lockup timeout in ms > 0 (default 10000)" );module_param_named (lockup_timeout, amdgpu_lockup_timeout, int,0444 ); +/** +* DOC: dpm (int) +* Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto). +*/ MODULE_PARM_DESC (dpm,"DPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (dpm, amdgpu_dpm, int,0444 ); +/** +* DOC: fw_load_type (int) +* Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto). +*/ MODULE_PARM_DESC (fw_load_type,"firmware loading type (0 = direct, 1 = SMU, 2 = PSP, -1 = auto)" );module_param_named (fw_load_type, amdgpu_fw_load_type, int,0444 ); +/** +* DOC: aspm (int) +* To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (aspm,"ASPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (aspm, amdgpu_aspm, int,0444 ); +/** +* DOC: runpm (int) +* Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down +* the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality. +*/ MODULE_PARM_DESC (runpm,"PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default)" );module_param_named (runpm, amdgpu_runtime_pm, int,0444 ); +/** +* DOC: ip_block_mask (uint) +* Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, etc.). +* Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index (e.g., you might have a device +* with multiple instances of an IP block) so the mask is board specific. The default is 0xffffffff (enable all blocks on a device). +*/ MODULE_PARM_DESC (ip_block_mask,"IP Block Mask (all blocks enabled (default))" );module_param_named (ip_block_mask, amdgpu_ip_block_mask, uint,0444 ); +/** +* DOC: bapm (int) +* To disable BAPM (0 = disable). The default -1 (auto, enabled) +*/ MODULE_PARM_DESC (bapm,"BAPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (bapm, amdgpu_bapm, int,0444 ); +/** +* DOC: deep_color (int) +* Set 1 to enable Deep Color support. The default is 0 (disabled). +*/ MODULE_PARM_DESC (deep_color,"Deep Color support (1 = enable, 0 = disable (default))" );module_param_named (deep_color, amdgpu_deep_color, int,0444 ); +/** +* DOC: vm_size (int) +* Override the size of the GPU's per client virtual address space in GiB. The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_size,"VM address space size in gigabytes (default 64GB)" );module_param_named (vm_size, amdgpu_vm_size, int,0444 ); +/** +* DOC: vm_fragment_size (int) +* Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_fragment_size,"VM fragment size in bits (4, 5, etc. 4 = 64K (default), Max 9 = 2M)" );module_param_named (vm_fragment_size, amdgpu_vm_fragment_size, int,0444 ); +/** +* DOC: vm_block_size (int) +* Override VM page table size in bits (default depending on vm_size and hw setup). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_block_size,"VM page table size in bits (default depending on vm_size)" );module_param_named (vm_block_size, amdgpu_vm_block_size, int,0444 ); +/** +* DOC: vm_fault_stop (int) +* Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop). +*/ MODULE_PARM_DESC (vm_fault_stop,"Stop on VM fault (0 = never (default), 1 = print first, 2 = always)" );module_param_named (vm_fault_stop, amdgpu_vm_fault_stop, int,0444 ); +/** +* DOC: vm_debug (int) +* Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled). +*/ MODULE_PARM_DESC (vm_debug,"Debug VM handling (0 = disabled (default), 1 = enabled)" );module_param_named (vm_debug, amdgpu_vm_debug, int,0644 ); +/** +* DOC: vm_update_mode (int) +* Override VM update mode. VM updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default +* is -1 (Only in large BAR(LB) systems Compute VM tables will be updated by CPU, otherwise 0, never). +*/ MODULE_PARM_DESC (vm_update_mode,"VM update using CPU (0 = never (default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both" );module_param_named (vm_update_mode, amdgpu_vm_update_mode, int,0444 ); +/** +* DOC: vram_page_split (int) +* Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512. +*/ MODULE_PARM_DESC (vram_page_split,"Number of pages after we split VRAM allocations (default 512, -1 = disable)" );module_param_named (vram_page_split, amdgpu_vram_page_split, int,0444 ); +/** +* DOC: exp_hw_support (int) +* Enable experimental hw support (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (exp_hw_support,"experimental hw support (1 = enable, 0 = disable (default))" );module_param_named (exp_hw_support, amdgpu_exp_hw_support, int,0444 ); +/** +* DOC: dc (int) +* Disable/Enable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (dc,"Display Core driver (1 = enable, 0 = disable, -1 = auto (default))" );module_param_named (dc, amdgpu_dc, int,0444 );MODULE_PARM_DESC (dc_log,"Display Core Log Level (0 = minimal (default), 1 = chatty" );module_param_named (dc_log, amdgpu_dc_log, int,0444 ); +/** +* DOC: sched_jobs (int) +* Override the max number of jobs supported in the sw queue. The default is 32. +*/ MODULE_PARM_DESC (sched_jobs,"the max number of jobs supported in the sw queue (default 32)" );module_param_named (sched_jobs, amdgpu_sched_jobs, int,0444 ); +/** +* DOC: sched_hw_submission (int) +* Override the max number of HW submissions. The default is 2. +*/ MODULE_PARM_DESC (sched_hw_submission,"the max number of HW submissions (default 2)" );module_param_named (sched_hw_submission, amdgpu_sched_hw_submission, int,0444 ); +/** +* DOC: ppfeaturemask (uint) +* Override what power features are enabled. The default is 0xffff3fff (gfxoff(bit 15), overdriver(bit 14) disabled). +*/ MODULE_PARM_DESC (ppfeaturemask,"all power features enabled (default))" );module_param_named (ppfeaturemask, amdgpu_pp_feature_mask, uint,0444 );@@ -241,58 +367,129 @@ module_param_named(no_evict, amdgpu_no_evict, int, 0444);MODULE_PARM_DESC (direct_gma_size,"Direct GMA size in megabytes (max 96MB)" );module_param_named (direct_gma_size, amdgpu_direct_gma_size, int,0444 ); +/** +* DOC: pcie_gen_cap (uint) +* Override PCIE gen speed capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_gen_cap,"PCIE Gen Caps (0: autodetect (default))" );module_param_named (pcie_gen_cap, amdgpu_pcie_gen_cap, uint,0444 ); +/** +* DOC: pcie_lane_cap (uint) +* Override PCIE lanes capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_lane_cap,"PCIE Lane Caps (0: autodetect (default))" );module_param_named (pcie_lane_cap, amdgpu_pcie_lane_cap, uint,0444 ); +/** +* DOC: cg_mask (uint) +* Override what Clockgating features are enabled on GPU (0 = disable clock gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (cg_mask,"Clockgating flags mask (0 = disable clock gating)" );module_param_named (cg_mask, amdgpu_cg_mask, uint,0444 ); +/** +* DOC: pg_mask (uint) +* Override what Powergating features are enabled on GPU (0 = disable power gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (pg_mask,"Powergating flags mask (0 = disable power gating)" );module_param_named (pg_mask, amdgpu_pg_mask, uint,0444 ); +/** +* DOC: sdma_phase_quantum (uint) +* Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32. +*/ MODULE_PARM_DESC (sdma_phase_quantum,"SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change (default 32))" );module_param_named (sdma_phase_quantum, amdgpu_sdma_phase_quantum, uint,0444 ); +/** +* DOC: disable_cu (charp) +* Set to disable CUs (It's set like se.sh.cu,...). The default is NULL. +*/ MODULE_PARM_DESC (disable_cu,"Disable CUs (se.sh.cu,...)" );module_param_named (disable_cu, amdgpu_disable_cu, charp,0444 ); +/** +* DOC: virtual_display (charp) +* Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards +* or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. The default is NULL. +*/ MODULE_PARM_DESC (virtual_display,"Enable virtual display feature (the virtual_display will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x)" );module_param_named (virtual_display, amdgpu_virtual_display, charp,0444 ); +/** +* DOC: ngg (int) +* Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (ngg,"Next Generation Graphics (1 = enable, 0 = disable(default depending on gfx))" );module_param_named (ngg, amdgpu_ngg, int,0444 ); +/** +* DOC: prim_buf_per_se (int) +* Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (prim_buf_per_se,"the size of Primitive Buffer per Shader Engine (default depending on gfx)" );module_param_named (prim_buf_per_se, amdgpu_prim_buf_per_se, int,0444 ); +/** +* DOC: pos_buf_per_se (int) +* Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (pos_buf_per_se,"the size of Position Buffer per Shader Engine (default depending on gfx)" );module_param_named (pos_buf_per_se, amdgpu_pos_buf_per_se, int,0444 ); +/** +* DOC: cntl_sb_buf_per_se (int) +* Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (cntl_sb_buf_per_se,"the size of Control Sideband per Shader Engine (default depending on gfx)" );module_param_named (cntl_sb_buf_per_se, amdgpu_cntl_sb_buf_per_se, int,0444 ); +/** +* DOC: param_buf_per_se (int) +* Override the size of Off-Chip Pramater Cache per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (param_buf_per_se,"the size of Off-Chip Pramater Cache per Shader Engine (default depending on gfx)" );module_param_named (param_buf_per_se, amdgpu_param_buf_per_se, int,0444 ); +/** +* DOC: job_hang_limit (int) +* Set how much time allow a job hang and not drop it. The default is 0. +*/ MODULE_PARM_DESC (job_hang_limit,"how much time allow a job hang and not drop it (default 0)" );module_param_named (job_hang_limit, amdgpu_job_hang_limit, int ,0444 ); +/** +* DOC: lbpw (int) +* Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (lbpw,"Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (lbpw, amdgpu_lbpw, int,0444 );MODULE_PARM_DESC (compute_multipipe,"Force compute queues to be spread across pipes (1 = enable, 0 = disable, -1 = auto)" );module_param_named (compute_multipipe, amdgpu_compute_multipipe, int,0444 ); +/** +* DOC: gpu_recovery (int) +* Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV). +*/ MODULE_PARM_DESC (gpu_recovery,"Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)" );module_param_named (gpu_recovery, amdgpu_gpu_recovery, int,0444 ); +/** +* DOC: emu_mode (int) +* Set value 1 to enable emulation mode. The default is 0 (disabled). +*/ MODULE_PARM_DESC (emu_mode,"Emulation mode, (1 = enable, 0 = disable)" );module_param_named (emu_mode, amdgpu_emu_mode, int,0444 ); +/** +* DOC: si_support (int) +* Set SI support driver. This parameter works after set config CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_SI #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -306,6 +503,12 @@ MODULE_PARM_DESC(si_support, "SI support (1 = enabled (default), 0 = disabled)")module_param_named (si_support, amdgpu_si_support, int,0444 );#endif +/** +* DOC: cik_support (int) +* Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_CIK #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -319,6 +522,11 @@ MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled)module_param_named (cik_support, amdgpu_cik_support, int,0444 );
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled) · line 532
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +5
-0#endif +/** +* DOC: smu_memory_pool_size (uint) +* It is used to reserve gtt for smu debug usage, setting value 0 to disable it. The actual size is value * 256MiB. +* E.g. 0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte. The default is 0 (disabled). +*/ MODULE_PARM_DESC (smu_memory_pool_size,"reserve gtt for smu debug usage, 0 = disable," "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte" );
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
A message that is not in the archive (sent off-list or not yet received): DM3PR12MB08738B5A7E07B2D5483A425199410-4hRkV8tDpBiYEITDcfEJ8AdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org
Deucher, Alexander
Acked-by Junwei Zhangyeah, that's a good idea.
Alex
________________________________
From: amd-gfx <[email protected]> on behalf of Qu, Jim <[email protected]>
Sent: Wednesday, July 4, 2018 1:14 AM
To: Zhang, Jerry; Jiang, Sonny; [email protected]
Subject: 答复: [PATCH v2] drm/amdgpu: update documentation for amdgpu_drv.c
I always confuse any bits definiation about some feature mask. such as ip_block_mask, pg_mask, cg_mask, pp_feature_mask. I think other people who is not familiar with amdgpu driver may have the same problem.
So, is it possible to detail every bit mask of features?
Thanks
JimQu
________________________________________
发件人: amd-gfx <[email protected]> 代表 Zhang, Jerry (Junwei) <[email protected]> 发送时间: 2018年7月4日 12:57:01
收件人: Jiang, Sonny; [email protected]
主题: Re: [PATCH v2] drm/amdgpu: update documentation for amdgpu_drv.c
Quoted 1 line · Sonny Jiang
Signed-off-by Sonny Jiang <[email protected]>
Quoted 420 lines
--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 222 +++++++++++++++++++++++++++++++- 2 files changed, 222 insertions(+), 7 deletions(-)Documentation/gpu/amdgpu.rst +7
-0@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core Next (GCN) architecture. +Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +210
-7@@ -1,10 +1,3 @@ -/** -* \file amdgpu_drv.c -* AMD Amdgpu driver -* -* \author Gareth Hughes <[email protected]> -*/ -/* * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. @@ -136,102 +129,235 @@ int amdgpu_gpu_recovery = -1; /* auto */int amdgpu_emu_mode =0 ;uint amdgpu_smu_memory_pool_size =0 ; +/** +* DOC: vramlimit (int) +* Restrict the total amount of VRAM in MiB for testing. The default is 0 (Use full VRAM). +*/ MODULE_PARM_DESC (vramlimit,"Restrict VRAM for testing, in megabytes" );module_param_named (vramlimit, amdgpu_vram_limit, int,0600 ); +/** +* DOC: vis_vramlimit (int) +* Restrict the amount of CPU visible VRAM in MiB for testing. The default is 0 (Use full CPU visible VRAM). +*/ MODULE_PARM_DESC (vis_vramlimit,"Restrict visible VRAM for testing, in megabytes" );module_param_named (vis_vramlimit, amdgpu_vis_vram_limit, int,0444 ); +/** +* DOC: gartsize (uint) +* Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic). +*/ MODULE_PARM_DESC (gartsize,"Size of GART to setup in megabytes (32, 64, etc., -1=auto)" );module_param_named (gartsize, amdgpu_gart_size, uint,0600 ); +/** +* DOC: gttsize (int) +* Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM, +* otherwise 3/4 RAM size). +*/ MODULE_PARM_DESC (gttsize,"Size of the GTT domain in megabytes (-1 = auto)" );module_param_named (gttsize, amdgpu_gtt_size, int,0600 ); +/** +* DOC: moverate (int) +* Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s). +*/ MODULE_PARM_DESC (moverate,"Maximum buffer migration rate in MB/s. (32, 64, etc., -1=auto, 0=1=disabled)" );module_param_named (moverate, amdgpu_moverate, int,0600 ); +/** +* DOC: benchmark (int) +* Run benchmarks. The default is 0 (Skip benchmarks). +*/ MODULE_PARM_DESC (benchmark,"Run benchmark" );module_param_named (benchmark, amdgpu_benchmarking, int,0444 ); +/** +* DOC: test (int) +* Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test). +*/ MODULE_PARM_DESC (test,"Run tests" );module_param_named (test, amdgpu_testing, int,0444 ); +/** +* DOC: audio (int) +* Set Audio. The default is -1 (Enabled), set 0 to disabled it. +*/ MODULE_PARM_DESC (audio,"Audio enable (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (audio, amdgpu_audio, int,0444 ); +/** +* DOC: disp_priority (int) +* Set display Priority (0 = auto, 1 = normal, 2 = high). The default is 0. +*/ MODULE_PARM_DESC (disp_priority,"Display Priority (0 = auto, 1 = normal, 2 = high)" );module_param_named (disp_priority, amdgpu_disp_priority, int,0444 ); +/** +* DOC: hw_i2c (int) +* To enable hw i2c engine. The default is 0 (Disabled). +*/ MODULE_PARM_DESC (hw_i2c,"hw i2c engine enable (0 = disable)" );module_param_named (hw_i2c, amdgpu_hw_i2c, int,0444 ); +/** +* DOC: pcie_gen2 (int) +* To disable PCIE Gen2 mode (0 = disable, 1 = enable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (pcie_gen2,"PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (pcie_gen2, amdgpu_pcie_gen2, int,0444 ); +/** +* DOC: msi (int) +* To disable MSI functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (msi,"MSI support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (msi, amdgpu_msi, int,0444 ); +/** +* DOC: lockup_timeout (int) +* Set GPU scheduler timeout value in ms. It must be > 0. The default is 10000. +*/ MODULE_PARM_DESC (lockup_timeout,"GPU lockup timeout in ms > 0 (default 10000)" );module_param_named (lockup_timeout, amdgpu_lockup_timeout, int,0444 ); +/** +* DOC: dpm (int) +* Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto). +*/ MODULE_PARM_DESC (dpm,"DPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (dpm, amdgpu_dpm, int,0444 ); +/** +* DOC: fw_load_type (int) +* Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto). +*/ MODULE_PARM_DESC (fw_load_type,"firmware loading type (0 = direct, 1 = SMU, 2 = PSP, -1 = auto)" );module_param_named (fw_load_type, amdgpu_fw_load_type, int,0444 ); +/** +* DOC: aspm (int) +* To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (aspm,"ASPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (aspm, amdgpu_aspm, int,0444 ); +/** +* DOC: runpm (int) +* Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down +* the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality. +*/ MODULE_PARM_DESC (runpm,"PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default)" );module_param_named (runpm, amdgpu_runtime_pm, int,0444 ); +/** +* DOC: ip_block_mask (uint) +* Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, etc.). +* Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index (e.g., you might have a device +* with multiple instances of an IP block) so the mask is board specific. The default is 0xffffffff (enable all blocks on a device). +*/ MODULE_PARM_DESC (ip_block_mask,"IP Block Mask (all blocks enabled (default))" );module_param_named (ip_block_mask, amdgpu_ip_block_mask, uint,0444 ); +/** +* DOC: bapm (int) +* To disable BAPM (0 = disable). The default -1 (auto, enabled) +*/ MODULE_PARM_DESC (bapm,"BAPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (bapm, amdgpu_bapm, int,0444 ); +/** +* DOC: deep_color (int) +* Set 1 to enable Deep Color support. The default is 0 (disabled). +*/ MODULE_PARM_DESC (deep_color,"Deep Color support (1 = enable, 0 = disable (default))" );module_param_named (deep_color, amdgpu_deep_color, int,0444 ); +/** +* DOC: vm_size (int) +* Override the size of the GPU's per client virtual address space in GiB. The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_size,"VM address space size in gigabytes (default 64GB)" );module_param_named (vm_size, amdgpu_vm_size, int,0444 ); +/** +* DOC: vm_fragment_size (int) +* Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_fragment_size,"VM fragment size in bits (4, 5, etc. 4 = 64K (default), Max 9 = 2M)" );module_param_named (vm_fragment_size, amdgpu_vm_fragment_size, int,0444 ); +/** +* DOC: vm_block_size (int) +* Override VM page table size in bits (default depending on vm_size and hw setup). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_block_size,"VM page table size in bits (default depending on vm_size)" );module_param_named (vm_block_size, amdgpu_vm_block_size, int,0444 ); +/** +* DOC: vm_fault_stop (int) +* Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop). +*/ MODULE_PARM_DESC (vm_fault_stop,"Stop on VM fault (0 = never (default), 1 = print first, 2 = always)" );module_param_named (vm_fault_stop, amdgpu_vm_fault_stop, int,0444 ); +/** +* DOC: vm_debug (int) +* Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled). +*/ MODULE_PARM_DESC (vm_debug,"Debug VM handling (0 = disabled (default), 1 = enabled)" );module_param_named (vm_debug, amdgpu_vm_debug, int,0644 ); +/** +* DOC: vm_update_mode (int) +* Override VM update mode. VM updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default +* is -1 (Only in large BAR(LB) systems Compute VM tables will be updated by CPU, otherwise 0, never). +*/ MODULE_PARM_DESC (vm_update_mode,"VM update using CPU (0 = never (default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both" );module_param_named (vm_update_mode, amdgpu_vm_update_mode, int,0444 ); +/** +* DOC: vram_page_split (int) +* Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512. +*/ MODULE_PARM_DESC (vram_page_split,"Number of pages after we split VRAM allocations (default 512, -1 = disable)" );module_param_named (vram_page_split, amdgpu_vram_page_split, int,0444 ); +/** +* DOC: exp_hw_support (int) +* Enable experimental hw support (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (exp_hw_support,"experimental hw support (1 = enable, 0 = disable (default))" );module_param_named (exp_hw_support, amdgpu_exp_hw_support, int,0444 ); +/** +* DOC: dc (int) +* Disable/Enable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (dc,"Display Core driver (1 = enable, 0 = disable, -1 = auto (default))" );module_param_named (dc, amdgpu_dc, int,0444 );MODULE_PARM_DESC (dc_log,"Display Core Log Level (0 = minimal (default), 1 = chatty" );module_param_named (dc_log, amdgpu_dc_log, int,0444 ); +/** +* DOC: sched_jobs (int) +* Override the max number of jobs supported in the sw queue. The default is 32. +*/ MODULE_PARM_DESC (sched_jobs,"the max number of jobs supported in the sw queue (default 32)" );module_param_named (sched_jobs, amdgpu_sched_jobs, int,0444 ); +/** +* DOC: sched_hw_submission (int) +* Override the max number of HW submissions. The default is 2. +*/ MODULE_PARM_DESC (sched_hw_submission,"the max number of HW submissions (default 2)" );module_param_named (sched_hw_submission, amdgpu_sched_hw_submission, int,0444 ); +/** +* DOC: ppfeaturemask (uint) +* Override what power features are enabled. The default is 0xffff3fff (gfxoff(bit 15), overdriver(bit 14) disabled). +*/ MODULE_PARM_DESC (ppfeaturemask,"all power features enabled (default))" );module_param_named (ppfeaturemask, amdgpu_pp_feature_mask, uint,0444 );@@ -241,58 +367,129 @@ module_param_named(no_evict, amdgpu_no_evict, int, 0444);MODULE_PARM_DESC (direct_gma_size,"Direct GMA size in megabytes (max 96MB)" );module_param_named (direct_gma_size, amdgpu_direct_gma_size, int,0444 ); +/** +* DOC: pcie_gen_cap (uint) +* Override PCIE gen speed capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_gen_cap,"PCIE Gen Caps (0: autodetect (default))" );module_param_named (pcie_gen_cap, amdgpu_pcie_gen_cap, uint,0444 ); +/** +* DOC: pcie_lane_cap (uint) +* Override PCIE lanes capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_lane_cap,"PCIE Lane Caps (0: autodetect (default))" );module_param_named (pcie_lane_cap, amdgpu_pcie_lane_cap, uint,0444 ); +/** +* DOC: cg_mask (uint) +* Override what Clockgating features are enabled on GPU (0 = disable clock gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (cg_mask,"Clockgating flags mask (0 = disable clock gating)" );module_param_named (cg_mask, amdgpu_cg_mask, uint,0444 ); +/** +* DOC: pg_mask (uint) +* Override what Powergating features are enabled on GPU (0 = disable power gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (pg_mask,"Powergating flags mask (0 = disable power gating)" );module_param_named (pg_mask, amdgpu_pg_mask, uint,0444 ); +/** +* DOC: sdma_phase_quantum (uint) +* Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32. +*/ MODULE_PARM_DESC (sdma_phase_quantum,"SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change (default 32))" );module_param_named (sdma_phase_quantum, amdgpu_sdma_phase_quantum, uint,0444 ); +/** +* DOC: disable_cu (charp) +* Set to disable CUs (It's set like se.sh.cu,...). The default is NULL. +*/ MODULE_PARM_DESC (disable_cu,"Disable CUs (se.sh.cu,...)" );module_param_named (disable_cu, amdgpu_disable_cu, charp,0444 ); +/** +* DOC: virtual_display (charp) +* Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards +* or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. The default is NULL. +*/ MODULE_PARM_DESC (virtual_display,"Enable virtual display feature (the virtual_display will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x)" );module_param_named (virtual_display, amdgpu_virtual_display, charp,0444 ); +/** +* DOC: ngg (int) +* Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (ngg,"Next Generation Graphics (1 = enable, 0 = disable(default depending on gfx))" );module_param_named (ngg, amdgpu_ngg, int,0444 ); +/** +* DOC: prim_buf_per_se (int) +* Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (prim_buf_per_se,"the size of Primitive Buffer per Shader Engine (default depending on gfx)" );module_param_named (prim_buf_per_se, amdgpu_prim_buf_per_se, int,0444 ); +/** +* DOC: pos_buf_per_se (int) +* Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (pos_buf_per_se,"the size of Position Buffer per Shader Engine (default depending on gfx)" );module_param_named (pos_buf_per_se, amdgpu_pos_buf_per_se, int,0444 ); +/** +* DOC: cntl_sb_buf_per_se (int) +* Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (cntl_sb_buf_per_se,"the size of Control Sideband per Shader Engine (default depending on gfx)" );module_param_named (cntl_sb_buf_per_se, amdgpu_cntl_sb_buf_per_se, int,0444 ); +/** +* DOC: param_buf_per_se (int) +* Override the size of Off-Chip Pramater Cache per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (param_buf_per_se,"the size of Off-Chip Pramater Cache per Shader Engine (default depending on gfx)" );module_param_named (param_buf_per_se, amdgpu_param_buf_per_se, int,0444 ); +/** +* DOC: job_hang_limit (int) +* Set how much time allow a job hang and not drop it. The default is 0. +*/ MODULE_PARM_DESC (job_hang_limit,"how much time allow a job hang and not drop it (default 0)" );module_param_named (job_hang_limit, amdgpu_job_hang_limit, int ,0444 ); +/** +* DOC: lbpw (int) +* Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (lbpw,"Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (lbpw, amdgpu_lbpw, int,0444 );MODULE_PARM_DESC (compute_multipipe,"Force compute queues to be spread across pipes (1 = enable, 0 = disable, -1 = auto)" );module_param_named (compute_multipipe, amdgpu_compute_multipipe, int,0444 ); +/** +* DOC: gpu_recovery (int) +* Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV). +*/ MODULE_PARM_DESC (gpu_recovery,"Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)" );module_param_named (gpu_recovery, amdgpu_gpu_recovery, int,0444 ); +/** +* DOC: emu_mode (int) +* Set value 1 to enable emulation mode. The default is 0 (disabled). +*/ MODULE_PARM_DESC (emu_mode,"Emulation mode, (1 = enable, 0 = disable)" );module_param_named (emu_mode, amdgpu_emu_mode, int,0444 ); +/** +* DOC: si_support (int) +* Set SI support driver. This parameter works after set config CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_SI #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -306,6 +503,12 @@ MODULE_PARM_DESC(si_support, "SI support (1 = enabled (default), 0 = disabled)")module_param_named (si_support, amdgpu_si_support, int,0444 );#endif +/** +* DOC: cik_support (int) +* Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_CIK #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -319,6 +522,11 @@ MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled)module_param_named (cik_support, amdgpu_cik_support, int,0444 );
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled) · line 532
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +5
-0#endif +/** +* DOC: smu_memory_pool_size (uint) +* It is used to reserve gtt for smu debug usage, setting value 0 to disable it. The actual size is value * 256MiB. +* E.g. 0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte. The default is 0 (disabled). +*/ MODULE_PARM_DESC (smu_memory_pool_size,"reserve gtt for smu debug usage, 0 = disable," "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte" );
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
A message that is not in the archive (sent off-list or not yet received): BN6PR12MB1809E05B1841BDE16B73DFEBF7410-/b2+HYfkarSEx6ez0IUAagdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org
Jiang, Sonny
Acked-by Junwei ZhangHi Alex,
IP blocks indexes are not fixed. What's your idea to list them? By asic family?
enum amd_ip_block_type {
AMD_IP_BLOCK_TYPE_COMMON,
AMD_IP_BLOCK_TYPE_GMC,
AMD_IP_BLOCK_TYPE_IH,
AMD_IP_BLOCK_TYPE_SMC,
AMD_IP_BLOCK_TYPE_PSP,
AMD_IP_BLOCK_TYPE_DCE,
AMD_IP_BLOCK_TYPE_GFX,
AMD_IP_BLOCK_TYPE_SDMA,
AMD_IP_BLOCK_TYPE_UVD,
AMD_IP_BLOCK_TYPE_VCE,
AMD_IP_BLOCK_TYPE_ACP,
AMD_IP_BLOCK_TYPE_VCN
};
Thanks,
Sonny
________________________________
From: Deucher, Alexander
Sent: Wednesday, July 4, 2018 2:49:17 AM
To: Qu, Jim; Zhang, Jerry; Jiang, Sonny; [email protected]
Subject: Re: [PATCH v2] drm/amdgpu: update documentation for amdgpu_drv.c
yeah, that's a good idea.
Alex
________________________________
From: amd-gfx <[email protected]> on behalf of Qu, Jim <[email protected]>
Sent: Wednesday, July 4, 2018 1:14 AM
To: Zhang, Jerry; Jiang, Sonny; [email protected]
Subject: 答复: [PATCH v2] drm/amdgpu: update documentation for amdgpu_drv.c
I always confuse any bits definiation about some feature mask. such as ip_block_mask, pg_mask, cg_mask, pp_feature_mask. I think other people who is not familiar with amdgpu driver may have the same problem.
So, is it possible to detail every bit mask of features?
Thanks
JimQu
________________________________________
发件人: amd-gfx <[email protected]> 代表 Zhang, Jerry (Junwei) <[email protected]> 发送时间: 2018年7月4日 12:57:01
收件人: Jiang, Sonny; [email protected]
主题: Re: [PATCH v2] drm/amdgpu: update documentation for amdgpu_drv.c
Quoted 1 line · Sonny Jiang
Signed-off-by Sonny Jiang <[email protected]>
Quoted 420 lines
--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 222 +++++++++++++++++++++++++++++++- 2 files changed, 222 insertions(+), 7 deletions(-)Documentation/gpu/amdgpu.rst +7
-0@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core Next (GCN) architecture. +Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +210
-7@@ -1,10 +1,3 @@ -/** -* \file amdgpu_drv.c -* AMD Amdgpu driver -* -* \author Gareth Hughes <[email protected]> -*/ -/* * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. @@ -136,102 +129,235 @@ int amdgpu_gpu_recovery = -1; /* auto */int amdgpu_emu_mode =0 ;uint amdgpu_smu_memory_pool_size =0 ; +/** +* DOC: vramlimit (int) +* Restrict the total amount of VRAM in MiB for testing. The default is 0 (Use full VRAM). +*/ MODULE_PARM_DESC (vramlimit,"Restrict VRAM for testing, in megabytes" );module_param_named (vramlimit, amdgpu_vram_limit, int,0600 ); +/** +* DOC: vis_vramlimit (int) +* Restrict the amount of CPU visible VRAM in MiB for testing. The default is 0 (Use full CPU visible VRAM). +*/ MODULE_PARM_DESC (vis_vramlimit,"Restrict visible VRAM for testing, in megabytes" );module_param_named (vis_vramlimit, amdgpu_vis_vram_limit, int,0444 ); +/** +* DOC: gartsize (uint) +* Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic). +*/ MODULE_PARM_DESC (gartsize,"Size of GART to setup in megabytes (32, 64, etc., -1=auto)" );module_param_named (gartsize, amdgpu_gart_size, uint,0600 ); +/** +* DOC: gttsize (int) +* Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM, +* otherwise 3/4 RAM size). +*/ MODULE_PARM_DESC (gttsize,"Size of the GTT domain in megabytes (-1 = auto)" );module_param_named (gttsize, amdgpu_gtt_size, int,0600 ); +/** +* DOC: moverate (int) +* Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s). +*/ MODULE_PARM_DESC (moverate,"Maximum buffer migration rate in MB/s. (32, 64, etc., -1=auto, 0=1=disabled)" );module_param_named (moverate, amdgpu_moverate, int,0600 ); +/** +* DOC: benchmark (int) +* Run benchmarks. The default is 0 (Skip benchmarks). +*/ MODULE_PARM_DESC (benchmark,"Run benchmark" );module_param_named (benchmark, amdgpu_benchmarking, int,0444 ); +/** +* DOC: test (int) +* Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test). +*/ MODULE_PARM_DESC (test,"Run tests" );module_param_named (test, amdgpu_testing, int,0444 ); +/** +* DOC: audio (int) +* Set Audio. The default is -1 (Enabled), set 0 to disabled it. +*/ MODULE_PARM_DESC (audio,"Audio enable (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (audio, amdgpu_audio, int,0444 ); +/** +* DOC: disp_priority (int) +* Set display Priority (0 = auto, 1 = normal, 2 = high). The default is 0. +*/ MODULE_PARM_DESC (disp_priority,"Display Priority (0 = auto, 1 = normal, 2 = high)" );module_param_named (disp_priority, amdgpu_disp_priority, int,0444 ); +/** +* DOC: hw_i2c (int) +* To enable hw i2c engine. The default is 0 (Disabled). +*/ MODULE_PARM_DESC (hw_i2c,"hw i2c engine enable (0 = disable)" );module_param_named (hw_i2c, amdgpu_hw_i2c, int,0444 ); +/** +* DOC: pcie_gen2 (int) +* To disable PCIE Gen2 mode (0 = disable, 1 = enable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (pcie_gen2,"PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (pcie_gen2, amdgpu_pcie_gen2, int,0444 ); +/** +* DOC: msi (int) +* To disable MSI functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (msi,"MSI support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (msi, amdgpu_msi, int,0444 ); +/** +* DOC: lockup_timeout (int) +* Set GPU scheduler timeout value in ms. It must be > 0. The default is 10000. +*/ MODULE_PARM_DESC (lockup_timeout,"GPU lockup timeout in ms > 0 (default 10000)" );module_param_named (lockup_timeout, amdgpu_lockup_timeout, int,0444 ); +/** +* DOC: dpm (int) +* Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto). +*/ MODULE_PARM_DESC (dpm,"DPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (dpm, amdgpu_dpm, int,0444 ); +/** +* DOC: fw_load_type (int) +* Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto). +*/ MODULE_PARM_DESC (fw_load_type,"firmware loading type (0 = direct, 1 = SMU, 2 = PSP, -1 = auto)" );module_param_named (fw_load_type, amdgpu_fw_load_type, int,0444 ); +/** +* DOC: aspm (int) +* To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (aspm,"ASPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (aspm, amdgpu_aspm, int,0444 ); +/** +* DOC: runpm (int) +* Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down +* the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality. +*/ MODULE_PARM_DESC (runpm,"PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default)" );module_param_named (runpm, amdgpu_runtime_pm, int,0444 ); +/** +* DOC: ip_block_mask (uint) +* Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, etc.). +* Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index (e.g., you might have a device +* with multiple instances of an IP block) so the mask is board specific. The default is 0xffffffff (enable all blocks on a device). +*/ MODULE_PARM_DESC (ip_block_mask,"IP Block Mask (all blocks enabled (default))" );module_param_named (ip_block_mask, amdgpu_ip_block_mask, uint,0444 ); +/** +* DOC: bapm (int) +* To disable BAPM (0 = disable). The default -1 (auto, enabled) +*/ MODULE_PARM_DESC (bapm,"BAPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (bapm, amdgpu_bapm, int,0444 ); +/** +* DOC: deep_color (int) +* Set 1 to enable Deep Color support. The default is 0 (disabled). +*/ MODULE_PARM_DESC (deep_color,"Deep Color support (1 = enable, 0 = disable (default))" );module_param_named (deep_color, amdgpu_deep_color, int,0444 ); +/** +* DOC: vm_size (int) +* Override the size of the GPU's per client virtual address space in GiB. The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_size,"VM address space size in gigabytes (default 64GB)" );module_param_named (vm_size, amdgpu_vm_size, int,0444 ); +/** +* DOC: vm_fragment_size (int) +* Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_fragment_size,"VM fragment size in bits (4, 5, etc. 4 = 64K (default), Max 9 = 2M)" );module_param_named (vm_fragment_size, amdgpu_vm_fragment_size, int,0444 ); +/** +* DOC: vm_block_size (int) +* Override VM page table size in bits (default depending on vm_size and hw setup). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_block_size,"VM page table size in bits (default depending on vm_size)" );module_param_named (vm_block_size, amdgpu_vm_block_size, int,0444 ); +/** +* DOC: vm_fault_stop (int) +* Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop). +*/ MODULE_PARM_DESC (vm_fault_stop,"Stop on VM fault (0 = never (default), 1 = print first, 2 = always)" );module_param_named (vm_fault_stop, amdgpu_vm_fault_stop, int,0444 ); +/** +* DOC: vm_debug (int) +* Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled). +*/ MODULE_PARM_DESC (vm_debug,"Debug VM handling (0 = disabled (default), 1 = enabled)" );module_param_named (vm_debug, amdgpu_vm_debug, int,0644 ); +/** +* DOC: vm_update_mode (int) +* Override VM update mode. VM updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default +* is -1 (Only in large BAR(LB) systems Compute VM tables will be updated by CPU, otherwise 0, never). +*/ MODULE_PARM_DESC (vm_update_mode,"VM update using CPU (0 = never (default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both" );module_param_named (vm_update_mode, amdgpu_vm_update_mode, int,0444 ); +/** +* DOC: vram_page_split (int) +* Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512. +*/ MODULE_PARM_DESC (vram_page_split,"Number of pages after we split VRAM allocations (default 512, -1 = disable)" );module_param_named (vram_page_split, amdgpu_vram_page_split, int,0444 ); +/** +* DOC: exp_hw_support (int) +* Enable experimental hw support (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (exp_hw_support,"experimental hw support (1 = enable, 0 = disable (default))" );module_param_named (exp_hw_support, amdgpu_exp_hw_support, int,0444 ); +/** +* DOC: dc (int) +* Disable/Enable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (dc,"Display Core driver (1 = enable, 0 = disable, -1 = auto (default))" );module_param_named (dc, amdgpu_dc, int,0444 );MODULE_PARM_DESC (dc_log,"Display Core Log Level (0 = minimal (default), 1 = chatty" );module_param_named (dc_log, amdgpu_dc_log, int,0444 ); +/** +* DOC: sched_jobs (int) +* Override the max number of jobs supported in the sw queue. The default is 32. +*/ MODULE_PARM_DESC (sched_jobs,"the max number of jobs supported in the sw queue (default 32)" );module_param_named (sched_jobs, amdgpu_sched_jobs, int,0444 ); +/** +* DOC: sched_hw_submission (int) +* Override the max number of HW submissions. The default is 2. +*/ MODULE_PARM_DESC (sched_hw_submission,"the max number of HW submissions (default 2)" );module_param_named (sched_hw_submission, amdgpu_sched_hw_submission, int,0444 ); +/** +* DOC: ppfeaturemask (uint) +* Override what power features are enabled. The default is 0xffff3fff (gfxoff(bit 15), overdriver(bit 14) disabled). +*/ MODULE_PARM_DESC (ppfeaturemask,"all power features enabled (default))" );module_param_named (ppfeaturemask, amdgpu_pp_feature_mask, uint,0444 );@@ -241,58 +367,129 @@ module_param_named(no_evict, amdgpu_no_evict, int, 0444);MODULE_PARM_DESC (direct_gma_size,"Direct GMA size in megabytes (max 96MB)" );module_param_named (direct_gma_size, amdgpu_direct_gma_size, int,0444 ); +/** +* DOC: pcie_gen_cap (uint) +* Override PCIE gen speed capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_gen_cap,"PCIE Gen Caps (0: autodetect (default))" );module_param_named (pcie_gen_cap, amdgpu_pcie_gen_cap, uint,0444 ); +/** +* DOC: pcie_lane_cap (uint) +* Override PCIE lanes capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_lane_cap,"PCIE Lane Caps (0: autodetect (default))" );module_param_named (pcie_lane_cap, amdgpu_pcie_lane_cap, uint,0444 ); +/** +* DOC: cg_mask (uint) +* Override what Clockgating features are enabled on GPU (0 = disable clock gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (cg_mask,"Clockgating flags mask (0 = disable clock gating)" );module_param_named (cg_mask, amdgpu_cg_mask, uint,0444 ); +/** +* DOC: pg_mask (uint) +* Override what Powergating features are enabled on GPU (0 = disable power gating). The default is 0xffffffff (all enabled). +*/ MODULE_PARM_DESC (pg_mask,"Powergating flags mask (0 = disable power gating)" );module_param_named (pg_mask, amdgpu_pg_mask, uint,0444 ); +/** +* DOC: sdma_phase_quantum (uint) +* Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32. +*/ MODULE_PARM_DESC (sdma_phase_quantum,"SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change (default 32))" );module_param_named (sdma_phase_quantum, amdgpu_sdma_phase_quantum, uint,0444 ); +/** +* DOC: disable_cu (charp) +* Set to disable CUs (It's set like se.sh.cu,...). The default is NULL. +*/ MODULE_PARM_DESC (disable_cu,"Disable CUs (se.sh.cu,...)" );module_param_named (disable_cu, amdgpu_disable_cu, charp,0444 ); +/** +* DOC: virtual_display (charp) +* Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards +* or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. The default is NULL. +*/ MODULE_PARM_DESC (virtual_display,"Enable virtual display feature (the virtual_display will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x)" );module_param_named (virtual_display, amdgpu_virtual_display, charp,0444 ); +/** +* DOC: ngg (int) +* Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (ngg,"Next Generation Graphics (1 = enable, 0 = disable(default depending on gfx))" );module_param_named (ngg, amdgpu_ngg, int,0444 ); +/** +* DOC: prim_buf_per_se (int) +* Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (prim_buf_per_se,"the size of Primitive Buffer per Shader Engine (default depending on gfx)" );module_param_named (prim_buf_per_se, amdgpu_prim_buf_per_se, int,0444 ); +/** +* DOC: pos_buf_per_se (int) +* Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (pos_buf_per_se,"the size of Position Buffer per Shader Engine (default depending on gfx)" );module_param_named (pos_buf_per_se, amdgpu_pos_buf_per_se, int,0444 ); +/** +* DOC: cntl_sb_buf_per_se (int) +* Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (cntl_sb_buf_per_se,"the size of Control Sideband per Shader Engine (default depending on gfx)" );module_param_named (cntl_sb_buf_per_se, amdgpu_cntl_sb_buf_per_se, int,0444 ); +/** +* DOC: param_buf_per_se (int) +* Override the size of Off-Chip Pramater Cache per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (param_buf_per_se,"the size of Off-Chip Pramater Cache per Shader Engine (default depending on gfx)" );module_param_named (param_buf_per_se, amdgpu_param_buf_per_se, int,0444 ); +/** +* DOC: job_hang_limit (int) +* Set how much time allow a job hang and not drop it. The default is 0. +*/ MODULE_PARM_DESC (job_hang_limit,"how much time allow a job hang and not drop it (default 0)" );module_param_named (job_hang_limit, amdgpu_job_hang_limit, int ,0444 ); +/** +* DOC: lbpw (int) +* Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (lbpw,"Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (lbpw, amdgpu_lbpw, int,0444 );MODULE_PARM_DESC (compute_multipipe,"Force compute queues to be spread across pipes (1 = enable, 0 = disable, -1 = auto)" );module_param_named (compute_multipipe, amdgpu_compute_multipipe, int,0444 ); +/** +* DOC: gpu_recovery (int) +* Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV). +*/ MODULE_PARM_DESC (gpu_recovery,"Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)" );module_param_named (gpu_recovery, amdgpu_gpu_recovery, int,0444 ); +/** +* DOC: emu_mode (int) +* Set value 1 to enable emulation mode. The default is 0 (disabled). +*/ MODULE_PARM_DESC (emu_mode,"Emulation mode, (1 = enable, 0 = disable)" );module_param_named (emu_mode, amdgpu_emu_mode, int,0444 ); +/** +* DOC: si_support (int) +* Set SI support driver. This parameter works after set config CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_SI #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -306,6 +503,12 @@ MODULE_PARM_DESC(si_support, "SI support (1 = enabled (default), 0 = disabled)")module_param_named (si_support, amdgpu_si_support, int,0444 );#endif +/** +* DOC: cik_support (int) +* Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_CIK #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -319,6 +522,11 @@ MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled)module_param_named (cik_support, amdgpu_cik_support, int,0444 );
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled) · line 532
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +5
-0#endif +/** +* DOC: smu_memory_pool_size (uint) +* It is used to reserve gtt for smu debug usage, setting value 0 to disable it. The actual size is value * 256MiB. +* E.g. 0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte. The default is 0 (disabled). +*/ MODULE_PARM_DESC (smu_memory_pool_size,"reserve gtt for smu debug usage, 0 = disable," "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte" );
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
A message that is not in the archive (sent off-list or not yet received): CY4PR12MB15115A371542EB485B6BADA7FD410-rpdhrqHFk06XKdXwTjA44gdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org
Quoted 7 lines · Sonny
Hi Alex,
IP blocks indexes are not fixed. What's your idea to list them? By asic family?
Quoted 15 lines
enum
amd_ip_block_type{
AMD_IP_BLOCK_TYPE_COMMON,
AMD_IP_BLOCK_TYPE_GMC,
AMD_IP_BLOCK_TYPE_IH,
AMD_IP_BLOCK_TYPE_SMC,
AMD_IP_BLOCK_TYPE_PSP,
AMD_IP_BLOCK_TYPE_DCE,
AMD_IP_BLOCK_TYPE_GFX,
AMD_IP_BLOCK_TYPE_SDMA,
AMD_IP_BLOCK_TYPE_UVD,
AMD_IP_BLOCK_TYPE_VCE,
AMD_IP_BLOCK_TYPE_ACP,
AMD_IP_BLOCK_TYPE_VCN
};
The order is not fixed and due to instancing, there may be more than one of a particular block for each asic, so the order is asic specific. The driver prints out the list for each asic when it loads. E.g.,
[ 4.204408] [drm] add ip block number 0 <vi_common> [ 4.204408] [drm] add ip block number 1 <gmc_v8_0> [ 4.204409] [drm] add ip block number 2 <tonga_ih> [ 4.204409] [drm] add ip block number 3 <powerplay> [ 4.204410] [drm] add ip block number 4 <dm> [ 4.204411] [drm] add ip block number 5 <gfx_v8_0> [ 4.204412] [drm] add ip block number 6 <sdma_v3_0> [ 4.204412] [drm] add ip block number 7 <uvd_v5_0> [ 4.204413] [drm] add ip block number 8 <vce_v3_0>
So, for the patch, I would just say something like:
"Some asics may not have some IPs or may include multiple instances of an IP so the ordering various from asic to asic. See the driver output in the kernel log for the list of IPs on the asic."
Alex
Quoted 591 lines
Thanks,
Sonny
________________________________
From: Deucher, Alexander
Sent: Wednesday, July 4, 2018 2:49:17 AM
To: Qu, Jim; Zhang, Jerry; Jiang, Sonny; [email protected]
Subject: Re: [PATCH v2] drm/amdgpu: update documentation foramdgpu_drv.cyeah, that's a good idea.
Alex
________________________________
From: amd-gfx <[email protected]> on behalf of Qu, Jim <[email protected]>
Sent: Wednesday, July 4, 2018 1:14 AM
To: Zhang, Jerry; Jiang, Sonny; [email protected]
Subject: 答复: [PATCH v2] drm/amdgpu: update documentation foramdgpu_drv.cI always confuse any bits definiation about some feature mask. such as
ip_block_mask,pg_mask,cg_mask,pp_feature_mask. I think other people who is not familiar with amdgpu driver may have the same problem.So, is it possible to detail every bit mask of features?
Thanks
JimQu________________________________________
发件人: amd-gfx <[email protected]> 代表 Zhang, Jerry (Junwei) <[email protected]>
发送时间: 2018年7月4日 12:57:01
收件人: Jiang, Sonny; [email protected]
主题: Re: [PATCH v2] drm/amdgpu: update documentation foramdgpu_drv.cQuoted 1 line · Sonny Jiang
Signed-off-by Sonny Jiang <[email protected]>Acked-by Junwei Zhang <[email protected]>Quoted 530 lines
--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 222 +++++++++++++++++++++++++++++++- 2 files changed, 222 insertions(+), 7 deletions(-)Documentation/gpu/amdgpu.rst +0
-0@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the GraphicsCore
Next (GCN) architecture.Documentation/gpu/amdgpu.rst +7
-0+Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +3
-7@@ -1,10 +1,3 @@ -/** -* \file amdgpu_drv.c -* AMD Amdgpu driver -* -* \author Gareth Hughes <[email protected]> -*/ -/* * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. @@ -136,102 +129,235 @@ int amdgpu_gpu_recovery = -1; /* auto */int amdgpu_emu_mode =0 ;uint amdgpu_smu_memory_pool_size =0 ; +/** +* DOC: vramlimit (int) +* Restrict the total amount of VRAM in MiB for testing. The default is 0 (Use full VRAM).
+ */
MODULE_PARM_DESC(vramlimit, "Restrict VRAM for testing, in megabytes");module_param_named(vramlimit, amdgpu_vram_limit, int, 0600);+/**
+ * DOC:vis_vramlimit(int)
+ * Restrict the amount of CPU visible VRAM in MiB for testing. The default is 0 (Use full CPU visible VRAM).
+ */
MODULE_PARM_DESC(vis_vramlimit, "Restrict visible VRAM for testing, in
megabytes");
module_param_named(vis_vramlimit, amdgpu_vis_vram_limit, int, 0444);+/**
+ * DOC: gartsize (uint)
+ * Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic).
+ */
MODULE_PARM_DESC(gartsize, "Size of GART to setup in megabytes (32, 64,
etc., -1=auto)");
module_param_named(gartsize, amdgpu_gart_size, uint, 0600);+/**
+ * DOC: gttsize (int)
+ * Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM,
+ * otherwise 3/4 RAM size).
+ */
MODULE_PARM_DESC(gttsize, "Size of the GTT domain in megabytes (-1 =
auto)");
module_param_named(gttsize, amdgpu_gtt_size, int, 0600);+/**
+ * DOC: moverate (int)
+ * Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s).
+ */
MODULE_PARM_DESC(moverate, "Maximum buffer migration rate in MB/s. (32,
64, etc., -1=auto, 0=1=disabled)");
module_param_named(moverate, amdgpu_moverate, int, 0600);drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7
-0+/** +* DOC: benchmark (int) +* Run benchmarks. The default is 0 (Skip benchmarks). +*/ MODULE_PARM_DESC (benchmark,"Run benchmark" );module_param_named (benchmark, amdgpu_benchmarking, int,0444 ); +/** +* DOC: test (int) +* Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test).
+ */
MODULE_PARM_DESC(test, "Run tests");module_param_named(test, amdgpu_testing, int, 0444);+/**
+ * DOC: audio (int)
+ * Set Audio. The default is -1 (Enabled), set 0 to disabled it.
+ */
MODULE_PARM_DESC(audio, "Audio enable (-1 = auto, 0 = disable, 1 =
enable)");
module_param_named(audio, amdgpu_audio, int, 0444);+/**
+ * DOC:disp_priority(int)
+ * Set display Priority (0 = auto, 1 = normal, 2 = high). The default is 0.
+ */
MODULE_PARM_DESC(disp_priority, "Display Priority (0 = auto, 1 = normal,
2 = high)");
module_param_named(disp_priority, amdgpu_disp_priority, int, 0444);drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7
-0+/** +* DOC: hw_i2c (int) +* To enable hw i2c engine. The default is 0 (Disabled). +*/ MODULE_PARM_DESC (hw_i2c,"hw i2c engine enable (0 = disable)" );module_param_named (hw_i2c, amdgpu_hw_i2c, int,0444 ); +/** +* DOC: pcie_gen2 (int) +* To disable PCIE Gen2 mode (0 = disable, 1 = enable). The default is -1 (auto, enabled).
+ */
MODULE_PARM_DESC(pcie_gen2, "PCIE Gen2 mode (-1 = auto, 0 = disable, 1 =
enable)");
module_param_named(pcie_gen2, amdgpu_pcie_gen2, int, 0444);+/**
+ * DOC: msi (int)
+ * To disable MSI functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled).
+ */
MODULE_PARM_DESC(msi, "MSI support (1 = enable, 0 = disable, -1 =
auto)");
module_param_named(msi, amdgpu_msi, int, 0444);+/**
+ * DOC:lockup_timeout(int)
+ * Set GPU scheduler timeout value in ms. It must be > 0. The default is 10000.
+ */
MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms > 0 (default
10000)");
module_param_named(lockup_timeout, amdgpu_lockup_timeout, int, 0444);+/**
+ * DOC: dpm (int)
+ * Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto).
+ */
MODULE_PARM_DESC(dpm, "DPM support (1 = enable, 0 = disable, -1 =
auto)");
module_param_named(dpm, amdgpu_dpm, int, 0444);+/**
+ * DOC:fw_load_type(int)
+ * Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto).
+ */
MODULE_PARM_DESC(fw_load_type, "firmware loading type (0 = direct, 1 =
SMU, 2 = PSP, -1 = auto)");
module_param_named(fw_load_type, amdgpu_fw_load_type, int, 0444);+/**
+ * DOC: aspm (int)
+ * To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto, enabled).
+ */
MODULE_PARM_DESC(aspm, "ASPM support (1 = enable, 0 = disable, -1 =
auto)");
module_param_named(aspm, amdgpu_aspm, int, 0444);+/**
+ * DOC: runpm (int)
+ * Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down
+ * the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality.
+ */
MODULE_PARM_DESC(runpm, "PX runtime pm (1 = force enable, 0 = disable,
-1 = PX only default)");
module_param_named(runpm, amdgpu_runtime_pm, int, 0444);+/**
+ * DOC:ip_block_mask(uint)
+ * Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, etc.).
+ * Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index (e.g., you might have a device
+ * with multiple instances of an IP block) so the mask is board specific. The default is0xffffffff(enable all blocks on a device).
+ */
MODULE_PARM_DESC(ip_block_mask, "IP Block Mask (all blocks enabled
(default))");
module_param_named(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);+/**
+ * DOC: bapm (int)
+ * To disable BAPM (0 = disable). The default -1 (auto, enabled)
+ */
MODULE_PARM_DESC(bapm, "BAPM support (1 = enable, 0 = disable, -1 =
auto)");
module_param_named(bapm, amdgpu_bapm, int, 0444);+/**
+ * DOC:deep_color(int)
+ * Set 1 to enable Deep Color support. The default is 0 (disabled).
+ */
MODULE_PARM_DESC(deep_color, "Deep Color support (1 = enable, 0 =
disable (default))");
module_param_named(deep_color, amdgpu_deep_color, int, 0444);+/**
+ * DOC:vm_size(int)
+ * Override the size of the GPU's per client virtual address space in GiB. The default is -1 (automatic for each asic).
+ */
MODULE_PARM_DESC(vm_size, "VM address space size in gigabytes (default
64GB)");
module_param_named(vm_size, amdgpu_vm_size, int, 0444);+/**
+ * DOC:vm_fragment_size(int)
+ * Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic).
+ */
MODULE_PARM_DESC(vm_fragment_size, "VM fragment size in bits (4, 5, etc.
4 = 64K (default), Max 9 = 2M)");
module_param_named(vm_fragment_size,amdgpu_vm_fragment_size, int,
0444);+/**
+ * DOC:vm_block_size(int)
+ * Override VM page table size in bits (default depending onvm_sizeand hw setup). The default is -1 (automatic for each asic).
+ */
MODULE_PARM_DESC(vm_block_size, "VM page table size in bits (default
depending onvm_size)");
module_param_named(vm_block_size, amdgpu_vm_block_size, int, 0444);+/**
+ * DOC:vm_fault_stop(int)
+ * Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop).
+ */
MODULE_PARM_DESC(vm_fault_stop, "Stop on VM fault (0 = never (default),
1 = print first, 2 = always)");
module_param_named(vm_fault_stop, amdgpu_vm_fault_stop, int, 0444);+/**
+ * DOC:vm_debug(int)
+ * Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled).
+ */
MODULE_PARM_DESC(vm_debug, "Debug VM handling (0 = disabled (default), 1
= enabled)");
module_param_named(vm_debug, amdgpu_vm_debug, int, 0644);+/**
+ * DOC:vm_update_mode(int)
+ * Override VM update mode. VM updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default
+ * is -1 (Only in large BAR(LB) systems Compute VM tables will be updated by CPU, otherwise 0, never).
+ */
MODULE_PARM_DESC(vm_update_mode, "VM update using CPU (0 = never
(default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both");
module_param_named(vm_update_mode, amdgpu_vm_update_mode, int, 0444);+/**
+ * DOC:vram_page_split(int)
+ * Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512.
+ */
MODULE_PARM_DESC(vram_page_split, "Number of pages after we split VRAM
allocations (default 512, -1 = disable)");
module_param_named(vram_page_split, amdgpu_vram_page_split, int, 0444);+/**
+ * DOC:exp_hw_support(int)
+ * Enable experimental hw support (1 = enable). The default is 0 (disabled).
+ */
MODULE_PARM_DESC(exp_hw_support, "experimental hw support (1 = enable, 0
= disable (default))");
module_param_named(exp_hw_support, amdgpu_exp_hw_support, int, 0444);+/**
+ * DOC: dc (int)
+ * Disable/Enable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic).
+ */
MODULE_PARM_DESC(dc, "Display Core driver (1 = enable, 0 = disable, -1 =
auto (default))");
module_param_named(dc, amdgpu_dc, int, 0444);MODULE_PARM_DESC(dc_log, "Display Core Log Level (0 = minimal (default),
1 = chatty");
module_param_named(dc_log, amdgpu_dc_log, int, 0444);+/**
+ * DOC:sched_jobs(int)
+ * Override the max number of jobs supported in the sw queue. The default is 32.
+ */
MODULE_PARM_DESC(sched_jobs, "the max number of jobs supported in the sw
queue (default 32)");
module_param_named(sched_jobs, amdgpu_sched_jobs, int, 0444);+/**
+ * DOC:sched_hw_submission(int)
+ * Override the max number of HW submissions. The default is 2.
+ */
MODULE_PARM_DESC(sched_hw_submission, "the max number of HW submissions
(default 2)");
module_param_named(sched_hw_submission,amdgpu_sched_hw_submission, int,
0444);+/**
+ * DOC: ppfeaturemask (uint)
+ * Override what power features are enabled. The default is0xffff3fff(gfxoff(bit 15), overdriver(bit 14) disabled).
+ */
MODULE_PARM_DESC(ppfeaturemask, "all power features enabled
(default))");
module_param_named(ppfeaturemask, amdgpu_pp_feature_mask, uint, 0444);drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +3
-0@@ -241,58 +367,129 @@ module_param_named(no_evict, amdgpu_no_evict, int, 0444);MODULE_PARM_DESC (direct_gma_size,"Direct GMA size in megabytes (max 96MB)");module_param_named (direct_gma_size, amdgpu_direct_gma_size, int,0444 ); +/** +* DOC: pcie_gen_cap (uint) +* Override PCIE gen speed capabilities. The default is 0 (automatic for each asic).
+ */
MODULE_PARM_DESC(pcie_gen_cap, "PCIE Gen Caps (0: autodetect
(default))");
module_param_named(pcie_gen_cap, amdgpu_pcie_gen_cap, uint, 0444);+/**
+ * DOC:pcie_lane_cap(uint)
+ * Override PCIE lanes capabilities. The default is 0 (automatic for each asic).
+ */
MODULE_PARM_DESC(pcie_lane_cap, "PCIE Lane Caps (0: autodetect
(default))");
module_param_named(pcie_lane_cap, amdgpu_pcie_lane_cap, uint, 0444);+/**
+ * DOC:cg_mask(uint)
+ * Override what Clockgating features are enabled on GPU (0 = disable clock gating). The default is0xffffffff(all enabled).
+ */
MODULE_PARM_DESC(cg_mask, "Clockgating flags mask (0 = disable clock
gating)");
module_param_named(cg_mask, amdgpu_cg_mask, uint, 0444);+/**
+ * DOC:pg_mask(uint)
+ * Override what Powergating features are enabled on GPU (0 = disable power gating). The default is0xffffffff(all enabled).
+ */
MODULE_PARM_DESC(pg_mask, "Powergating flags mask (0 = disable power
gating)");
module_param_named(pg_mask, amdgpu_pg_mask, uint, 0444);+/**
+ * DOC:sdma_phase_quantum(uint)
+ * Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32.
+ */
MODULE_PARM_DESC(sdma_phase_quantum, "SDMA context switch phase quantum
(x 1K GPU clock cycles, 0 = no change (default 32))");
module_param_named(sdma_phase_quantum,amdgpu_sdma_phase_quantum, uint,
0444);drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7
-0+/** +* DOC: disable_cu (charp) +* Set to disable CUs (It's set like se.sh.cu,...). The default is NULL. +*/ MODULE_PARM_DESC (disable_cu,"Disable CUs (se.sh.cu,...)" );module_param_named (disable_cu, amdgpu_disable_cu, charp,0444 ); +/** +* DOC: virtual_display (charp) +* Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards
+ * or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. The default is NULL.
+ */
MODULE_PARM_DESC(virtual_display,
"Enable virtual display feature (thevirtual_displaywill
be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x)");
module_param_named(virtual_display,amdgpu_virtual_display, charp,
0444);+/**
+ * DOC: ngg (int)
+ * Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled).
+ */
MODULE_PARM_DESC(ngg, "Next Generation Graphics (1 = enable, 0 =
disable(default depending on gfx))");
module_param_named(ngg, amdgpu_ngg, int, 0444);+/**
+ * DOC:prim_buf_per_se(int)
+ * Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
MODULE_PARM_DESC(prim_buf_per_se, "the size of Primitive Buffer per
Shader Engine (default depending on gfx)");
module_param_named(prim_buf_per_se, amdgpu_prim_buf_per_se, int, 0444);+/**
+ * DOC:pos_buf_per_se(int)
+ * Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
MODULE_PARM_DESC(pos_buf_per_se, "the size of Position Buffer per Shader
Engine (default depending on gfx)");
module_param_named(pos_buf_per_se, amdgpu_pos_buf_per_se, int, 0444);+/**
+ * DOC:cntl_sb_buf_per_se(int)
+ * Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
MODULE_PARM_DESC(cntl_sb_buf_per_se, "the size of Control Sideband per
Shader Engine (default depending on gfx)");
module_param_named(cntl_sb_buf_per_se,amdgpu_cntl_sb_buf_per_se, int,
0444);+/**
+ * DOC:param_buf_per_se(int)
+ * Override the size of Off-Chip Pramater Cache per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
MODULE_PARM_DESC(param_buf_per_se, "the size of Off-Chip Pramater Cache
per Shader Engine (default depending on gfx)");
module_param_named(param_buf_per_se,amdgpu_param_buf_per_se, int,
0444);+/**
+ * DOC:job_hang_limit(int)
+ * Set how much time allow a job hang and not drop it. The default is 0.
+ */
MODULE_PARM_DESC(job_hang_limit, "how much time allow a job hang and not
drop it (default 0)");
module_param_named(job_hang_limit, amdgpu_job_hang_limit, int ,0444);+/**
+ * DOC: lbpw (int)
+ * Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto, enabled).
+ */
MODULE_PARM_DESC(lbpw, "Load Balancing Per Watt (LBPW) support (1 =
enable, 0 = disable, -1 = auto)");
module_param_named(lbpw, amdgpu_lbpw, int, 0444);MODULE_PARM_DESC(compute_multipipe, "Force compute queues to be spread
across pipes (1 = enable, 0 = disable, -1 = auto)");
module_param_named(compute_multipipe,amdgpu_compute_multipipe, int,
0444);+/**
+ * DOC:gpu_recovery(int)
+ * Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV).
+ */
MODULE_PARM_DESC(gpu_recovery, "Enable GPU recovery mechanism, (1 =
enable, 0 = disable, -1 = auto)");
module_param_named(gpu_recovery, amdgpu_gpu_recovery, int, 0444);drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7
-0+/** +* DOC: emu_mode (int) +* Set value 1 to enable emulation mode. The default is 0 (disabled). +*/ MODULE_PARM_DESC (emu_mode,"Emulation mode, (1 = enable, 0 = disable)" );module_param_named (emu_mode, amdgpu_emu_mode, int,0444 ); +/** +* DOC: si_support (int) +* Set SI support driver. This parameter works after set config
CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is enabled,
+ * set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available,
+ * otherwise using amdgpu driver.
+ */
#ifdefCONFIG_DRM_AMDGPU_SI#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +6
-0@@ -306,6 +503,12 @@ MODULE_PARM_DESC(si_support, "SI support (1 = enabled (default), 0 = disabled)")module_param_named (si_support, amdgpu_si_support, int,0444 );#endif +/** +* DOC: cik_support (int) +* Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_CIK #if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +3
-0@@ -319,6 +522,11 @@ MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled)module_param_named (cik_support, amdgpu_cik_support, int,0444 );#endif +/** +* DOC: smu_memory_pool_size (uint) +* It is used to reserve gtt for smu debug usage, setting value 0 to Quoted 9 lines
disable it. The actual size is value * 256MiB.
+ * E.g.0x1= 256Mbyte,0x2= 512Mbyte,0x4= 1 Gbyte,0x8= 2GByte. The default is 0 (disabled).
+ */
MODULE_PARM_DESC(smu_memory_pool_size,
"reserve gtt for smu debug usage, 0 = disable,"
"0x1= 256Mbyte,0x2= 512Mbyte,0x4= 1 Gbyte,0x8=
2GByte");_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Quoted 5 lines
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx