Skip to contentSkip to conversation

drm/amdgpu: update documentation for amdgpu_drv.c

PATCH In review Sonny Jiang 2 participants 2 messages Jul 5, 2018 1 message not in the archive

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 drm/amdgpu: update documentation for amdgpu_drv.c

---
 Documentation/gpu/amdgpu.rst            |   7 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 230 +++++++++++++++++++++++++++++++-
 2 files changed, 230 insertions(+), 7 deletions(-)
Documentation/gpu/amdgpu.rst +7 -0
index 765c2a3..a740e49 100644
@@ -5,6 +5,13 @@
 The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core
 Next (GCN) architecture.
 
+Module Parameters
+=================
+
+The amdgpu driver supports the following module parameters:
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+
 Core Driver Infrastructure
 ==========================
 
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +223 -7

405 lines not on this page · raw message

Signature · 6 lines
2.7.4

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

A message that is not in the archive (sent off-list or not yet received): 1530815449-4711-1-git-send-email-sonny.jiang-5C7GfCeVMHo@public.gmane.org

Reviewed-by
#2 lore raw
Quoted 3 lines · Sonny Jiang

A few more nits below. WIth those fixed:

Quoted 85 lines
---
 Documentation/gpu/amdgpu.rst            |   7 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 230 +++++++++++++++++++++++++++++++-
 2 files changed, 230 insertions(+), 7 deletions(-)
Documentation/gpu/amdgpu.rst +7 -0
index 765c2a3..a740e49 100644
@@ -5,6 +5,13 @@
 The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core
 Next (GCN) architecture.
 
+Module Parameters
+=================
+
+The amdgpu driver supports the following module parameters:
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+
 Core Driver Infrastructure
 ==========================
 
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +25 -7
index 963578c..aa73040 100644
@@ -1,10 +1,3 @@
-/**
- * \file amdgpu_drv.c
- * AMD Amdgpu driver
- *
- * \author Gareth Hughes <[email protected]>
- */
-
 /*
  * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
  * All Rights Reserved.
@@ -136,102 +129,239 @@ int amdgpu_gpu_recovery = -1; /* auto */
 int amdgpu_emu_mode = 0;
 uint amdgpu_smu_memory_pool_size = 0;
 
+/**
+ * DOC: vramlimit (int)
+ * Restrict the total amount of VRAM in MiB for testing.  The default is 0 (Use full VRAM).
+ */
 MODULE_PARM_DESC(vramlimit, "Restrict VRAM for testing, in megabytes");
 module_param_named(vramlimit, amdgpu_vram_limit, int, 0600);
 
+/**
+ * DOC: vis_vramlimit (int)
+ * Restrict the amount of CPU visible VRAM in MiB for testing.  The default is 0 (Use full CPU visible VRAM).
+ */
 MODULE_PARM_DESC(vis_vramlimit, "Restrict visible VRAM for testing, in megabytes");
 module_param_named(vis_vramlimit, amdgpu_vis_vram_limit, int, 0444);
 
+/**
+ * DOC: gartsize (uint)
+ * Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic).
+ */
 MODULE_PARM_DESC(gartsize, "Size of GART to setup in megabytes (32, 64, etc., -1=auto)");
 module_param_named(gartsize, amdgpu_gart_size, uint, 0600);
 
+/**
+ * DOC: gttsize (int)
+ * Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM,
+ * otherwise 3/4 RAM size).
+ */
 MODULE_PARM_DESC(gttsize, "Size of the GTT domain in megabytes (-1 = auto)");
 module_param_named(gttsize, amdgpu_gtt_size, int, 0600);
 
+/**
+ * DOC: moverate (int)
+ * Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s).
+ */
 MODULE_PARM_DESC(moverate, "Maximum buffer migration rate in MB/s. (32, 64, etc., -1=auto, 0=1=disabled)");
 module_param_named(moverate, amdgpu_moverate, int, 0600);
 
+/**
+ * DOC: benchmark (int)
+ * Run benchmarks. The default is 0 (Skip benchmarks).
+ */
 MODULE_PARM_DESC(benchmark, "Run benchmark");
 module_param_named(benchmark, amdgpu_benchmarking, int, 0444);
 

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 184

Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7 -0
+/**
+ * DOC: test (int)
+ * Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test).
+ */
 MODULE_PARM_DESC(test, "Run tests");
 module_param_named(test, amdgpu_testing, int, 0444);
 
+/**
+ * DOC: audio (int)
+ * Set Audio. The default is -1 (Enabled), set 0 to disabled it.

Set HDMI/DPAudio. Only affects non-DC display handling.

Quoted 170 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +98 -0
+ */
 MODULE_PARM_DESC(audio, "Audio enable (-1 = auto, 0 = disable, 1 = enable)");
 module_param_named(audio, amdgpu_audio, int, 0444);
 
+/**
+ * DOC: disp_priority (int)
+ * Set display Priority (1 = normal, 2 = high). Only affects non-DC display handling. The default is 0 (auto).
+ */
 MODULE_PARM_DESC(disp_priority, "Display Priority (0 = auto, 1 = normal, 2 = high)");
 module_param_named(disp_priority, amdgpu_disp_priority, int, 0444);
 
+/**
+ * DOC: hw_i2c (int)
+ * To enable hw i2c engine. Only affects non-DC display handling. The default is 0 (Disabled).
+ */
 MODULE_PARM_DESC(hw_i2c, "hw i2c engine enable (0 = disable)");
 module_param_named(hw_i2c, amdgpu_hw_i2c, int, 0444);
 
+/**
+ * DOC: pcie_gen2 (int)
+ * To disable PCIE Gen2/3 mode (0 = disable, 1 = enable). The default is -1 (auto, enabled).
+ */
 MODULE_PARM_DESC(pcie_gen2, "PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable)");
 module_param_named(pcie_gen2, amdgpu_pcie_gen2, int, 0444);
 
+/**
+ * DOC: msi (int)
+ * To disable Message Signaled Interrupts (MSI) functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled).
+ */
 MODULE_PARM_DESC(msi, "MSI support (1 = enable, 0 = disable, -1 = auto)");
 module_param_named(msi, amdgpu_msi, int, 0444);
 
+/**
+ * DOC: lockup_timeout (int)
+ * Set GPU scheduler timeout value in ms. Value 0 is invalidated, will be adjusted to 10000.
+ * Negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET). The default is 10000.
+ */
 MODULE_PARM_DESC(lockup_timeout, "GPU lockup timeout in ms > 0 (default 10000)");
 module_param_named(lockup_timeout, amdgpu_lockup_timeout, int, 0444);
 
+/**
+ * DOC: dpm (int)
+ * Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto).
+ */
 MODULE_PARM_DESC(dpm, "DPM support (1 = enable, 0 = disable, -1 = auto)");
 module_param_named(dpm, amdgpu_dpm, int, 0444);
 
+/**
+ * DOC: fw_load_type (int)
+ * Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto).
+ */
 MODULE_PARM_DESC(fw_load_type, "firmware loading type (0 = direct, 1 = SMU, 2 = PSP, -1 = auto)");
 module_param_named(fw_load_type, amdgpu_fw_load_type, int, 0444);
 
+/**
+ * DOC: aspm (int)
+ * To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto, enabled).
+ */
 MODULE_PARM_DESC(aspm, "ASPM support (1 = enable, 0 = disable, -1 = auto)");
 module_param_named(aspm, amdgpu_aspm, int, 0444);
 
+/**
+ * DOC: runpm (int)
+ * Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down
+ * the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality.
+ */
 MODULE_PARM_DESC(runpm, "PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default)");
 module_param_named(runpm, amdgpu_runtime_pm, int, 0444);
 
+/**
+ * DOC: ip_block_mask (uint)
+ * Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, etc.).
+ * Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index. Some asics may not have
+ * some IPs or may include multiple instances of an IP so the ordering various from asic to asic. See the driver output in
+ * the kernel log for the list of IPs on the asic. The default is 0xffffffff (enable all blocks on a device).
+ */
 MODULE_PARM_DESC(ip_block_mask, "IP Block Mask (all blocks enabled (default))");
 module_param_named(ip_block_mask, amdgpu_ip_block_mask, uint, 0444);
 
+/**
+ * DOC: bapm (int)
+ * Bidirectional Application Power Management (BAPM) used to dynamically share TDP between CPU and GPU. Set value 0 to disable it.
+ * The default -1 (auto, enabled)
+ */
 MODULE_PARM_DESC(bapm, "BAPM support (1 = enable, 0 = disable, -1 = auto)");
 module_param_named(bapm, amdgpu_bapm, int, 0444);
 
+/**
+ * DOC: deep_color (int)
+ * Set 1 to enable Deep Color support. Only affects non-DC display handling. The default is 0 (disabled).
+ */
 MODULE_PARM_DESC(deep_color, "Deep Color support (1 = enable, 0 = disable (default))");
 module_param_named(deep_color, amdgpu_deep_color, int, 0444);
 
+/**
+ * DOC: vm_size (int)
+ * Override the size of the GPU's per client virtual address space in GiB.  The default is -1 (automatic for each asic).
+ */
 MODULE_PARM_DESC(vm_size, "VM address space size in gigabytes (default 64GB)");
 module_param_named(vm_size, amdgpu_vm_size, int, 0444);
 
+/**
+ * DOC: vm_fragment_size (int)
+ * Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic).
+ */
 MODULE_PARM_DESC(vm_fragment_size, "VM fragment size in bits (4, 5, etc. 4 = 64K (default), Max 9 = 2M)");
 module_param_named(vm_fragment_size, amdgpu_vm_fragment_size, int, 0444);
 
+/**
+ * DOC: vm_block_size (int)
+ * Override VM page table size in bits (default depending on vm_size and hw setup). The default is -1 (automatic for each asic).
+ */
 MODULE_PARM_DESC(vm_block_size, "VM page table size in bits (default depending on vm_size)");
 module_param_named(vm_block_size, amdgpu_vm_block_size, int, 0444);
 
+/**
+ * DOC: vm_fault_stop (int)
+ * Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop).
+ */
 MODULE_PARM_DESC(vm_fault_stop, "Stop on VM fault (0 = never (default), 1 = print first, 2 = always)");
 module_param_named(vm_fault_stop, amdgpu_vm_fault_stop, int, 0444);
 
+/**
+ * DOC: vm_debug (int)
+ * Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled).
+ */
 MODULE_PARM_DESC(vm_debug, "Debug VM handling (0 = disabled (default), 1 = enabled)");
 module_param_named(vm_debug, amdgpu_vm_debug, int, 0644);
 
+/**
+ * DOC: vm_update_mode (int)
+ * Override VM update mode. VM updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default
+ * is -1 (Only in large BAR(LB) systems Compute VM tables will be updated by CPU, otherwise 0, never).
+ */
 MODULE_PARM_DESC(vm_update_mode, "VM update using CPU (0 = never (default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both");
 module_param_named(vm_update_mode, amdgpu_vm_update_mode, int, 0444);
 
+/**
+ * DOC: vram_page_split (int)
+ * Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512.
+ */
 MODULE_PARM_DESC(vram_page_split, "Number of pages after we split VRAM allocations (default 512, -1 = disable)");
 module_param_named(vram_page_split, amdgpu_vram_page_split, int, 0444);
 
+/**
+ * DOC: exp_hw_support (int)
+ * Enable experimental hw support (1 = enable). The default is 0 (disabled).
+ */
 MODULE_PARM_DESC(exp_hw_support, "experimental hw support (1 = enable, 0 = disable (default))");
 module_param_named(exp_hw_support, amdgpu_exp_hw_support, int, 0444);
 
+/**
+ * DOC: dc (int)
+ * Disable/Enable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic).
+ */
 MODULE_PARM_DESC(dc, "Display Core driver (1 = enable, 0 = disable, -1 = auto (default))");
 module_param_named(dc, amdgpu_dc, int, 0444);
 
 MODULE_PARM_DESC(dc_log, "Display Core Log Level (0 = minimal (default), 1 = chatty");
 module_param_named(dc_log, amdgpu_dc_log, int, 0444);
 
+/**
+ * DOC: sched_jobs (int)
+ * Override the max number of jobs supported in the sw queue. The default is 32.
+ */
 MODULE_PARM_DESC(sched_jobs, "the max number of jobs supported in the sw queue (default 32)");
 module_param_named(sched_jobs, amdgpu_sched_jobs, int, 0444);
 
+/**
+ * DOC: sched_hw_submission (int)

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 364

Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7 -0
+ * Override the max number of HW submissions. The default is 2.
+ */
 MODULE_PARM_DESC(sched_hw_submission, "the max number of HW submissions (default 2)");
 module_param_named(sched_hw_submission, amdgpu_sched_hw_submission, int, 0444);
 
+/**
+ * DOC: ppfeaturemask (uint)
+ * Override power features enabled. See enum PP_FEATURE_MASK in drivers/gpu/drm/amd/include/amd_shared.h.
+ * The default is 0xffff3fff (gfxoff(bit 15), overdriver(bit 14) disabled).
+ */

Drop the default value here since it's likely to change (already has with the stutter addition). Just say something like the default is the current set of stable power features.

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c module_param_named(no_evict, amdgpu_no_evict, int, 0444); · line 377

Quoted 11 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +4 -0
 MODULE_PARM_DESC(ppfeaturemask, "all power features enabled (default))");
 module_param_named(ppfeaturemask, amdgpu_pp_feature_mask, uint, 0444);
 
@@ -241,58 +371,133 @@ module_param_named(no_evict, amdgpu_no_evict, int, 0444);
 MODULE_PARM_DESC(direct_gma_size, "Direct GMA size in megabytes (max 96MB)");
 module_param_named(direct_gma_size, amdgpu_direct_gma_size, int, 0444);
 
+/**
+ * DOC: pcie_gen_cap (uint)
+ * Override PCIE gen speed capabilities. The default is 0 (automatic for each asic).
+ */

See the CAIL flags in drivers/gpu/drm/amd/include/amd_pcie.h

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c module_param_named(no_evict, amdgpu_no_evict, int, 0444); · line 384

Quoted 7 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +4 -0
 MODULE_PARM_DESC(pcie_gen_cap, "PCIE Gen Caps (0: autodetect (default))");
 module_param_named(pcie_gen_cap, amdgpu_pcie_gen_cap, uint, 0444);
 
+/**
+ * DOC: pcie_lane_cap (uint)
+ * Override PCIE lanes capabilities. The default is 0 (automatic for each asic).
+ */

See the CAIL flags in drivers/gpu/drm/amd/include/amd_pcie.h

Quoted 147 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +78 -1
 MODULE_PARM_DESC(pcie_lane_cap, "PCIE Lane Caps (0: autodetect (default))");
 module_param_named(pcie_lane_cap, amdgpu_pcie_lane_cap, uint, 0444);
 
+/**
+ * DOC: cg_mask (uint)
+ * Override Clockgating features enabled on GPU (0 = disable clock gating). See the AMD_CG_SUPPORT flags in
+ * drivers/gpu/drm/amd/include/amd_shared.h. The default is 0xffffffff (all enabled).
+ */
 MODULE_PARM_DESC(cg_mask, "Clockgating flags mask (0 = disable clock gating)");
 module_param_named(cg_mask, amdgpu_cg_mask, uint, 0444);
 
+/**
+ * DOC: pg_mask (uint)
+ * Override Powergating features enabled on GPU (0 = disable power gating). See the AMD_PG_SUPPORT flags in
+ * drivers/gpu/drm/amd/include/amd_shared.h. The default is 0xffffffff (all enabled).
+ */
 MODULE_PARM_DESC(pg_mask, "Powergating flags mask (0 = disable power gating)");
 module_param_named(pg_mask, amdgpu_pg_mask, uint, 0444);
 
+/**
+ * DOC: sdma_phase_quantum (uint)
+ * Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32.
+ */
 MODULE_PARM_DESC(sdma_phase_quantum, "SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change (default 32))");
 module_param_named(sdma_phase_quantum, amdgpu_sdma_phase_quantum, uint, 0444);
 
+/**
+ * DOC: disable_cu (charp)
+ * Set to disable CUs (It's set like se.sh.cu,...). The default is NULL.
+ */
 MODULE_PARM_DESC(disable_cu, "Disable CUs (se.sh.cu,...)");
 module_param_named(disable_cu, amdgpu_disable_cu, charp, 0444);
 
+/**
+ * DOC: virtual_display (charp)
+ * Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards
+ * or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. It's the pci address of
+ * the device, plus the number of crtcs to expose. E.g., 0000:26:00.0,4 would enable 4 virtual crtcs on the pci
+ * device at 26:00.0. The default is NULL.
+ */
 MODULE_PARM_DESC(virtual_display,
                 "Enable virtual display feature (the virtual_display will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x)");
 module_param_named(virtual_display, amdgpu_virtual_display, charp, 0444);
 
+/**
+ * DOC: ngg (int)
+ * Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled).
+ */
 MODULE_PARM_DESC(ngg, "Next Generation Graphics (1 = enable, 0 = disable(default depending on gfx))");
 module_param_named(ngg, amdgpu_ngg, int, 0444);
 
+/**
+ * DOC: prim_buf_per_se (int)
+ * Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
 MODULE_PARM_DESC(prim_buf_per_se, "the size of Primitive Buffer per Shader Engine (default depending on gfx)");
 module_param_named(prim_buf_per_se, amdgpu_prim_buf_per_se, int, 0444);
 
+/**
+ * DOC: pos_buf_per_se (int)
+ * Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
 MODULE_PARM_DESC(pos_buf_per_se, "the size of Position Buffer per Shader Engine (default depending on gfx)");
 module_param_named(pos_buf_per_se, amdgpu_pos_buf_per_se, int, 0444);
 
+/**
+ * DOC: cntl_sb_buf_per_se (int)
+ * Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
 MODULE_PARM_DESC(cntl_sb_buf_per_se, "the size of Control Sideband per Shader Engine (default depending on gfx)");
 module_param_named(cntl_sb_buf_per_se, amdgpu_cntl_sb_buf_per_se, int, 0444);
 
+/**
+ * DOC: param_buf_per_se (int)
+ * Override the size of Off-Chip Pramater Cache per Shader Engine in Byte. The default is 0 (depending on gfx).
+ */
 MODULE_PARM_DESC(param_buf_per_se, "the size of Off-Chip Pramater Cache per Shader Engine (default depending on gfx)");
 module_param_named(param_buf_per_se, amdgpu_param_buf_per_se, int, 0444);
 
+/**
+ * DOC: job_hang_limit (int)
+ * Set how much time allow a job hang and not drop it. The default is 0.
+ */
 MODULE_PARM_DESC(job_hang_limit, "how much time allow a job hang and not drop it (default 0)");
 module_param_named(job_hang_limit, amdgpu_job_hang_limit, int ,0444);
 
+/**
+ * DOC: lbpw (int)
+ * Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto, enabled).
+ */
 MODULE_PARM_DESC(lbpw, "Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable, -1 = auto)");
 module_param_named(lbpw, amdgpu_lbpw, int, 0444);
 
 MODULE_PARM_DESC(compute_multipipe, "Force compute queues to be spread across pipes (1 = enable, 0 = disable, -1 = auto)");
 module_param_named(compute_multipipe, amdgpu_compute_multipipe, int, 0444);
 
+/**
+ * DOC: gpu_recovery (int)
+ * Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV).
+ */
 MODULE_PARM_DESC(gpu_recovery, "Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)");
 module_param_named(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
 
+/**
+ * DOC: emu_mode (int)
+ * Set value 1 to enable emulation mode. This is only needed when running on an emulator. The default is 0 (disabled).
+ */
 MODULE_PARM_DESC(emu_mode, "Emulation mode, (1 = enable, 0 = disable)");
 module_param_named(emu_mode, amdgpu_emu_mode, int, 0444);
 
+/**
+ * DOC: si_support (int)
+ * Set SI support driver. This parameter works after set config CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is enabled,
+ * set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available,
+ * otherwise using amdgpu driver.
+ */
 #ifdef CONFIG_DRM_AMDGPU_SI
 
 #if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
@@ -306,6 +511,12 @@ MODULE_PARM_DESC(si_support, "SI support (1 = enabled (default), 0 = disabled)")
 module_param_named(si_support, amdgpu_si_support, int, 0444);
 #endif
 
+/**
+ * DOC: cik_support (int)
+ * Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is enabled,
+ * set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available,
+ * otherwise using amdgpu driver.
+ */
 #ifdef CONFIG_DRM_AMDGPU_CIK
 
 #if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
@@ -319,6 +530,11 @@ MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled)
 module_param_named(cik_support, amdgpu_cik_support, int, 0444);
 #endif
 
+/**
+ * DOC: smu_memory_pool_size (uint)
+ * It is used to reserve gtt for smu debug usage, setting value 0 to disable it. The actual size is value * 256MiB.
+ * E.g. 0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte. The default is 0 (disabled).
+ */
 MODULE_PARM_DESC(smu_memory_pool_size,
        "reserve gtt for smu debug usage, 0 = disable,"
                "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte");
--

2.7.4

Quoted 4 lines

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx