drm/amdgpu: update documentation for amdgpu_drv.c
Subsystems (4)
PATCH v4 1/1 drm/amdgpu: update documentation for amdgpu_drv.c
--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 371 +++++++++++++++++++++++++++++++- 2 files changed, 371 insertions(+), 7 deletions(-)
Documentation/gpu/amdgpu.rst +7 -0
@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core Next (GCN) architecture. +Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +364 -7
546 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
A message that is not in the archive (sent off-list or not yet received): 1530801941-2611-1-git-send-email-sonny.jiang-5C7GfCeVMHo@public.gmane.org
Quoted 96 lines · Sonny Jiang
Signed-off-by Sonny Jiang <[email protected]>Acked-by Junwei Zhang <[email protected]>Acked-by Christian König <[email protected]>--- Documentation/gpu/amdgpu.rst | 7 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 371 +++++++++++++++++++++++++++++++- 2 files changed, 371 insertions(+), 7 deletions(-)Documentation/gpu/amdgpu.rst +7
-0@@ -5,6 +5,13 @@ The drm/amdgpu driver supports all AMD Radeon GPUs based on the Graphics Core Next (GCN) architecture. +Module Parameters +================= + +The amdgpu driver supports the following module parameters: + +.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c + Core Driver Infrastructure ==========================drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +30
-7@@ -1,10 +1,3 @@ -/** -* \file amdgpu_drv.c -* AMD Amdgpu driver -* -* \author Gareth Hughes <[email protected]> -*/ -/* * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. @@ -136,102 +129,300 @@ int amdgpu_gpu_recovery = -1; /* auto */int amdgpu_emu_mode =0 ;uint amdgpu_smu_memory_pool_size =0 ; +/** +* DOC: vramlimit (int) +* Restrict the total amount of VRAM in MiB for testing. The default is 0 (Use full VRAM). +*/ MODULE_PARM_DESC (vramlimit,"Restrict VRAM for testing, in megabytes" );module_param_named (vramlimit, amdgpu_vram_limit, int,0600 ); +/** +* DOC: vis_vramlimit (int) +* Restrict the amount of CPU visible VRAM in MiB for testing. The default is 0 (Use full CPU visible VRAM). +*/ MODULE_PARM_DESC (vis_vramlimit,"Restrict visible VRAM for testing, in megabytes" );module_param_named (vis_vramlimit, amdgpu_vis_vram_limit, int,0444 ); +/** +* DOC: gartsize (uint) +* Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic). +*/ MODULE_PARM_DESC (gartsize,"Size of GART to setup in megabytes (32, 64, etc., -1=auto)" );module_param_named (gartsize, amdgpu_gart_size, uint,0600 ); +/** +* DOC: gttsize (int) +* Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM, +* otherwise 3/4 RAM size). +*/ MODULE_PARM_DESC (gttsize,"Size of the GTT domain in megabytes (-1 = auto)" );module_param_named (gttsize, amdgpu_gtt_size, int,0600 ); +/** +* DOC: moverate (int) +* Set maximum buffer migration rate in MB/s. The default is -1 (8 MB/s). +*/ MODULE_PARM_DESC (moverate,"Maximum buffer migration rate in MB/s. (32, 64, etc., -1=auto, 0=1=disabled)" );module_param_named (moverate, amdgpu_moverate, int,0600 ); +/** +* DOC: benchmark (int) +* Run benchmarks. The default is 0 (Skip benchmarks). +*/ MODULE_PARM_DESC (benchmark,"Run benchmark" );module_param_named (benchmark, amdgpu_benchmarking, int,0444 ); +/** +* DOC: test (int) +* Test BO GTT->VRAM and VRAM->GTT GPU copies. The default is 0 (Skip test, only set 1 to run test). +*/ MODULE_PARM_DESC (test,"Run tests" );module_param_named (test, amdgpu_testing, int,0444 ); +/**
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 192
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7
-0+* DOC: audio (int) +* Set Audio. The default is -1 (Enabled), set 0 to disabled it. +*/ MODULE_PARM_DESC (audio,"Audio enable (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (audio, amdgpu_audio, int,0444 ); +/** +* DOC: disp_priority (int) +* Set display Priority (0 = auto, 1 = normal, 2 = high). The default is 0. +*/
Only affects non-DC display handling.
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 199
Quoted 7 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +4
-0MODULE_PARM_DESC (disp_priority,"Display Priority (0 = auto, 1 = normal, 2 = high)" );module_param_named (disp_priority, amdgpu_disp_priority, int,0444 ); +/** +* DOC: hw_i2c (int) +* To enable hw i2c engine. The default is 0 (Disabled). +*/
Only affects non-DC display handling.
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 206
Quoted 7 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +4
-0MODULE_PARM_DESC (hw_i2c,"hw i2c engine enable (0 = disable)" );module_param_named (hw_i2c, amdgpu_hw_i2c, int,0444 ); +/** +* DOC: pcie_gen2 (int) +* To disable PCIE Gen2 mode (0 = disable, 1 = enable). The default is -1 (auto, enabled). +*/
PCIE Gen2/3
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 213
Quoted 7 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +4
-0MODULE_PARM_DESC (pcie_gen2,"PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable)" );module_param_named (pcie_gen2, amdgpu_pcie_gen2, int,0444 ); +/** +* DOC: msi (int) +* To disable MSI functionality (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/
MSI = Message Signaled Interrupts
Quoted 61 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +43
-0MODULE_PARM_DESC (msi,"MSI support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (msi, amdgpu_msi, int,0444 ); +/** +* DOC: lockup_timeout (int) +* Set GPU scheduler timeout value in ms. Value 0 is invalidated, will be adjusted to 10000. +* Negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET). The default is 10000. +*/ MODULE_PARM_DESC (lockup_timeout,"GPU lockup timeout in ms > 0 (default 10000)" );module_param_named (lockup_timeout, amdgpu_lockup_timeout, int,0444 ); +/** +* DOC: dpm (int) +* Override for dynamic power management setting (1 = enable, 0 = disable). The default is -1 (auto). +*/ MODULE_PARM_DESC (dpm,"DPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (dpm, amdgpu_dpm, int,0444 ); +/** +* DOC: fw_load_type (int) +* Set different firmware loading type for debugging (0 = direct, 1 = SMU, 2 = PSP). The default is -1 (auto). +*/ MODULE_PARM_DESC (fw_load_type,"firmware loading type (0 = direct, 1 = SMU, 2 = PSP, -1 = auto)" );module_param_named (fw_load_type, amdgpu_fw_load_type, int,0444 ); +/** +* DOC: aspm (int) +* To disable ASPM (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (aspm,"ASPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (aspm, amdgpu_aspm, int,0444 ); +/** +* DOC: runpm (int) +* Override for runtime power management control for dGPUs in PX/HG laptops. The amdgpu driver can dynamically power down +* the dGPU on PX/HG laptops when it is idle. The default is -1 (auto enable). Setting the value to 0 disables this functionality. +*/ MODULE_PARM_DESC (runpm,"PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default)" );module_param_named (runpm, amdgpu_runtime_pm, int,0444 ); +/** +* DOC: ip_block_mask (uint) +* Override what IP blocks are enabled on the GPU. Each GPU is a collection of IP blocks (gfx, display, video, etc.). +* Use this parameter to disable specific blocks. Note that the IP blocks do not have a fixed index (e.g., you might have a device +* with multiple instances of an IP block) so the mask is board specific. The default is 0xffffffff (enable all blocks on a device). +* +* IP blocks types: +* +* - AMD_IP_BLOCK_TYPE_COMMON +* +* - AMD_IP_BLOCK_TYPE_GMC +* +* - AMD_IP_BLOCK_TYPE_IH +* +* - AMD_IP_BLOCK_TYPE_SMC +* +* - AMD_IP_BLOCK_TYPE_PSP +* +* - AMD_IP_BLOCK_TYPE_DCE +* +* - AMD_IP_BLOCK_TYPE_GFX
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 284
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +10
-0+* +* - AMD_IP_BLOCK_TYPE_SDMA +* +* - AMD_IP_BLOCK_TYPE_UVD +* +* - AMD_IP_BLOCK_TYPE_VCE +* +* - AMD_IP_BLOCK_TYPE_ACP +* +* - AMD_IP_BLOCK_TYPE_VCN
You can drop the list of IP types. Just add something like I mentioned in my reply earlier in the thread.
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 292
Quoted 8 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +5
-0+*/ MODULE_PARM_DESC (ip_block_mask,"IP Block Mask (all blocks enabled (default))" );module_param_named (ip_block_mask, amdgpu_ip_block_mask, uint,0444 ); +/** +* DOC: bapm (int) +* To disable BAPM (0 = disable). The default -1 (auto, enabled) +*/
BAPM = Bidirectional Application Power Management. Used to dynamically share TDP between CPU and GPU.
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 299
Quoted 7 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +4
-0MODULE_PARM_DESC (bapm,"BAPM support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (bapm, amdgpu_bapm, int,0444 ); +/** +* DOC: deep_color (int) +* Set 1 to enable Deep Color support. The default is 0 (disabled). +*/
Only affects non-DC display handling.
Quoted 115 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +76
-0MODULE_PARM_DESC (deep_color,"Deep Color support (1 = enable, 0 = disable (default))" );module_param_named (deep_color, amdgpu_deep_color, int,0444 ); +/** +* DOC: vm_size (int) +* Override the size of the GPU's per client virtual address space in GiB. The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_size,"VM address space size in gigabytes (default 64GB)" );module_param_named (vm_size, amdgpu_vm_size, int,0444 ); +/** +* DOC: vm_fragment_size (int) +* Override VM fragment size in bits (4, 5, etc. 4 = 64K, 9 = 2M). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_fragment_size,"VM fragment size in bits (4, 5, etc. 4 = 64K (default), Max 9 = 2M)" );module_param_named (vm_fragment_size, amdgpu_vm_fragment_size, int,0444 ); +/** +* DOC: vm_block_size (int) +* Override VM page table size in bits (default depending on vm_size and hw setup). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (vm_block_size,"VM page table size in bits (default depending on vm_size)" );module_param_named (vm_block_size, amdgpu_vm_block_size, int,0444 ); +/** +* DOC: vm_fault_stop (int) +* Stop on VM fault for debugging (0 = never, 1 = print first, 2 = always). The default is 0 (No stop). +*/ MODULE_PARM_DESC (vm_fault_stop,"Stop on VM fault (0 = never (default), 1 = print first, 2 = always)" );module_param_named (vm_fault_stop, amdgpu_vm_fault_stop, int,0444 ); +/** +* DOC: vm_debug (int) +* Debug VM handling (0 = disabled, 1 = enabled). The default is 0 (Disabled). +*/ MODULE_PARM_DESC (vm_debug,"Debug VM handling (0 = disabled (default), 1 = enabled)" );module_param_named (vm_debug, amdgpu_vm_debug, int,0644 ); +/** +* DOC: vm_update_mode (int) +* Override VM update mode. VM updated by using CPU (0 = never, 1 = Graphics only, 2 = Compute only, 3 = Both). The default +* is -1 (Only in large BAR(LB) systems Compute VM tables will be updated by CPU, otherwise 0, never). +*/ MODULE_PARM_DESC (vm_update_mode,"VM update using CPU (0 = never (default except for large BAR(LB)), 1 = Graphics only, 2 = Compute only (default for LB), 3 = Both" );module_param_named (vm_update_mode, amdgpu_vm_update_mode, int,0444 ); +/** +* DOC: vram_page_split (int) +* Override the number of pages after we split VRAM allocations (default 512, -1 = disable). The default is 512. +*/ MODULE_PARM_DESC (vram_page_split,"Number of pages after we split VRAM allocations (default 512, -1 = disable)" );module_param_named (vram_page_split, amdgpu_vram_page_split, int,0444 ); +/** +* DOC: exp_hw_support (int) +* Enable experimental hw support (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (exp_hw_support,"experimental hw support (1 = enable, 0 = disable (default))" );module_param_named (exp_hw_support, amdgpu_exp_hw_support, int,0444 ); +/** +* DOC: dc (int) +* Disable/Enable Display Core driver for debugging (1 = enable, 0 = disable). The default is -1 (automatic for each asic). +*/ MODULE_PARM_DESC (dc,"Display Core driver (1 = enable, 0 = disable, -1 = auto (default))" );module_param_named (dc, amdgpu_dc, int,0444 );MODULE_PARM_DESC (dc_log,"Display Core Log Level (0 = minimal (default), 1 = chatty" );module_param_named (dc_log, amdgpu_dc_log, int,0444 ); +/** +* DOC: sched_jobs (int) +* Override the max number of jobs supported in the sw queue. The default is 32. +*/ MODULE_PARM_DESC (sched_jobs,"the max number of jobs supported in the sw queue (default 32)" );module_param_named (sched_jobs, amdgpu_sched_jobs, int,0444 ); +/** +* DOC: sched_hw_submission (int) +* Override the max number of HW submissions. The default is 2. +*/ MODULE_PARM_DESC (sched_hw_submission,"the max number of HW submissions (default 2)" );module_param_named (sched_hw_submission, amdgpu_sched_hw_submission, int,0444 ); +/** +* DOC: ppfeaturemask (uint) +* Override what power features are enabled. The default is 0xffff3fff (gfxoff(bit 15), overdriver(bit 14) disabled). +* +* Power feature masks: +* +* - PP_SCLK_DPM_MASK = 0x1 +* +* - PP_MCLK_DPM_MASK = 0x2 +* +* - PP_PCIE_DPM_MASK = 0x4 +* +* - PP_SCLK_DEEP_SLEEP_MASK = 0x8 +* +* - PP_POWER_CONTAINMENT_MASK = 0x10 +* +* - PP_UVD_HANDSHAKE_MASK = 0x20 +* +* - PP_SMC_VOLTAGE_CONTROL_MASK = 0x40 +* +* - PP_VBI_TIME_SUPPORT_MASK = 0x80 +* +* - PP_ULV_MASK = 0x100 +* +* - PP_ENABLE_GFX_CG_THRU_SMU = 0x200 +* +* - PP_CLOCK_STRETCH_MASK = 0x400 +* +* - PP_OD_FUZZY_FAN_CONTROL_MASK = 0x800 +* +* - PP_SOCCLK_DPM_MASK = 0x1000
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c int amdgpu_gpu_recovery = -1; /* auto */ · line 424
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +10
-0+* +* - PP_DCEFCLK_DPM_MASK = 0x2000 +* +* - PP_OVERDRIVE_MASK = 0x4000 +* +* - PP_GFXOFF_MASK = 0x8000 +* +* - PP_ACG_MASK = 0x10000 +* +* - PP_STUTTER_MODE = 0x20000
Rather than list the masks here (which could get stale as we add new flags), just refer to the file/enum in the source code. E.g., See enum PP_FEATURE_MASK in drivers/gpu/drm/amd/include/amd_shared.h
Quoted 68 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +55
-0+*/ MODULE_PARM_DESC (ppfeaturemask,"all power features enabled (default))" );module_param_named (ppfeaturemask, amdgpu_pp_feature_mask, uint,0444 );@@ -241,58 +432,213 @@ module_param_named(no_evict, amdgpu_no_evict, int, 0444);MODULE_PARM_DESC (direct_gma_size,"Direct GMA size in megabytes (max 96MB)" );module_param_named (direct_gma_size, amdgpu_direct_gma_size, int,0444 ); +/** +* DOC: pcie_gen_cap (uint) +* Override PCIE gen speed capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_gen_cap,"PCIE Gen Caps (0: autodetect (default))" );module_param_named (pcie_gen_cap, amdgpu_pcie_gen_cap, uint,0444 ); +/** +* DOC: pcie_lane_cap (uint) +* Override PCIE lanes capabilities. The default is 0 (automatic for each asic). +*/ MODULE_PARM_DESC (pcie_lane_cap,"PCIE Lane Caps (0: autodetect (default))" );module_param_named (pcie_lane_cap, amdgpu_pcie_lane_cap, uint,0444 ); +/** +* DOC: cg_mask (uint) +* Override Clockgating features enabled on GPU (0 = disable clock gating). The default is 0xffffffff (all enabled). +* +* Clockgating flags: +* +* - AMD_CG_SUPPORT_GFX_MGCG -- (1 << 0) +* +* - AMD_CG_SUPPORT_GFX_MGLS -- (1 << 1) +* +* - AMD_CG_SUPPORT_GFX_CGCG -- (1 << 2) +* +* - AMD_CG_SUPPORT_GFX_CGLS -- (1 << 3) +* +* - AMD_CG_SUPPORT_GFX_CGTS -- (1 << 4) +* +* - AMD_CG_SUPPORT_GFX_CGTS_LS -- (1 << 5) +* +* - AMD_CG_SUPPORT_GFX_CP_LS -- (1 << 6) +* +* - AMD_CG_SUPPORT_GFX_RLC_LS -- (1 << 7) +* +* - AMD_CG_SUPPORT_MC_LS -- (1 << 8) +* +* - AMD_CG_SUPPORT_MC_MGCG -- (1 << 9) +* +* - AMD_CG_SUPPORT_SDMA_LS -- (1 << 10) +* +* - AMD_CG_SUPPORT_SDMA_MGCG -- (1 << 11) +* +* - AMD_CG_SUPPORT_BIF_LS -- (1 << 12) +* +* - AMD_CG_SUPPORT_UVD_MGCG -- (1 << 13) +* +* - AMD_CG_SUPPORT_VCE_MGCG -- (1 << 14) +* +* - AMD_CG_SUPPORT_HDP_LS -- (1 << 15) +* +* - AMD_CG_SUPPORT_HDP_MGCG -- (1 << 16) +* +* - AMD_CG_SUPPORT_ROM_MGCG -- (1 << 17) +* +* - AMD_CG_SUPPORT_DRM_LS -- (1 << 18) +* +* - AMD_CG_SUPPORT_BIF_MGCG -- (1 << 19) +*
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c module_param_named(no_evict, amdgpu_no_evict, int, 0444); · line 504
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +10
-0+* - AMD_CG_SUPPORT_GFX_3D_CGCG -- (1 << 20) +* +* - AMD_CG_SUPPORT_GFX_3D_CGLS -- (1 << 21) +* +* - AMD_CG_SUPPORT_DRM_MGCG -- (1 << 22) +* +* - AMD_CG_SUPPORT_DF_MGCG -- (1 << 23) +* +* - AMD_CG_SUPPORT_VCN_MGCG -- (1 << 24) +*/
Rather than list the masks here (which could get stale as we add new flags), just refer to the file/enum in the source code. E.g., See the AMD_CG_SUPPORT flagsin drivers/gpu/drm/amd/include/amd_shared.h
Quoted 29 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +26
-0MODULE_PARM_DESC (cg_mask,"Clockgating flags mask (0 = disable clock gating)" );module_param_named (cg_mask, amdgpu_cg_mask, uint,0444 ); +/** +* DOC: pg_mask (uint) +* Override Powergating features enabled on GPU (0 = disable power gating). The default is 0xffffffff (all enabled). +* +* Powergating flags: +* +* - AMD_PG_SUPPORT_GFX_PG -- (1 << 0) +* +* - AMD_PG_SUPPORT_GFX_SMG -- (1 << 1) +* +* - AMD_PG_SUPPORT_GFX_DMG -- (1 << 2) +* +* - AMD_PG_SUPPORT_UVD -- (1 << 3) +* +* - AMD_PG_SUPPORT_VCE -- (1 << 4) +* +* - AMD_PG_SUPPORT_CP -- (1 << 5) +* +* - AMD_PG_SUPPORT_GDS -- (1 << 6) +* +* - AMD_PG_SUPPORT_RLC_SMU_HS -- (1 << 7) +* +* - AMD_PG_SUPPORT_SDMA -- (1 << 8) +* +* - AMD_PG_SUPPORT_ACP -- (1 << 9) +*
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c module_param_named(no_evict, amdgpu_no_evict, int, 0444); · line 543
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +10
-0+* - AMD_PG_SUPPORT_SAMU -- (1 << 10) +* +* - AMD_PG_SUPPORT_GFX_QUICK_MG -- (1 << 11) +* +* - AMD_PG_SUPPORT_GFX_PIPELINE -- (1 << 12) +* +* - AMD_PG_SUPPORT_MMHUB -- (1 << 13) +* +* - AMD_PG_SUPPORT_VCN -- (1 << 14) +*/
Rather than list the masks here (which could get stale as we add new flags), just refer to the file/enum in the source code. E.g., See the AMD_PG_SUPPORT flagsin drivers/gpu/drm/amd/include/amd_shared.h
Quoted 12 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +6
-0MODULE_PARM_DESC (pg_mask,"Powergating flags mask (0 = disable power gating)" );module_param_named (pg_mask, amdgpu_pg_mask, uint,0444 ); +/** +* DOC: sdma_phase_quantum (uint) +* Override SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change). The default is 32. +*/ MODULE_PARM_DESC (sdma_phase_quantum,"SDMA context switch phase quantum (x 1K GPU clock cycles, 0 = no change (default 32))" );module_param_named (sdma_phase_quantum, amdgpu_sdma_phase_quantum, uint,0444 ); +/** +* DOC: disable_cu (charp)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c module_param_named(no_evict, amdgpu_no_evict, int, 0444); · line 565
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7
-0+* Set to disable CUs (It's set like se.sh.cu,...). The default is NULL. +*/ MODULE_PARM_DESC (disable_cu,"Disable CUs (se.sh.cu,...)" );module_param_named (disable_cu, amdgpu_disable_cu, charp,0444 ); +/** +* DOC: virtual_display (charp) +* Set to enable virtual display feature. This feature provides a virtual display hardware on headless boards +* or in virtualized environments. It will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x. The default is NULL. +*/
Give an example of this string and what each field represents. It's the pci address of the device, plus the number of crtcs to expose. E.g.,
0000:26:00.0,4
would enable 4 virtual crtcs on the pci device at 26:00.0.
Quoted 57 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +29
-0MODULE_PARM_DESC (virtual_display,"Enable virtual display feature (the virtual_display will be set like xxxx:xx:xx.x,x;xxxx:xx:xx.x,x)" );module_param_named (virtual_display, amdgpu_virtual_display, charp,0444 ); +/** +* DOC: ngg (int) +* Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled). +*/ MODULE_PARM_DESC (ngg,"Next Generation Graphics (1 = enable, 0 = disable(default depending on gfx))" );module_param_named (ngg, amdgpu_ngg, int,0444 ); +/** +* DOC: prim_buf_per_se (int) +* Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (prim_buf_per_se,"the size of Primitive Buffer per Shader Engine (default depending on gfx)" );module_param_named (prim_buf_per_se, amdgpu_prim_buf_per_se, int,0444 ); +/** +* DOC: pos_buf_per_se (int) +* Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (pos_buf_per_se,"the size of Position Buffer per Shader Engine (default depending on gfx)" );module_param_named (pos_buf_per_se, amdgpu_pos_buf_per_se, int,0444 ); +/** +* DOC: cntl_sb_buf_per_se (int) +* Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (cntl_sb_buf_per_se,"the size of Control Sideband per Shader Engine (default depending on gfx)" );module_param_named (cntl_sb_buf_per_se, amdgpu_cntl_sb_buf_per_se, int,0444 ); +/** +* DOC: param_buf_per_se (int) +* Override the size of Off-Chip Pramater Cache per Shader Engine in Byte. The default is 0 (depending on gfx). +*/ MODULE_PARM_DESC (param_buf_per_se,"the size of Off-Chip Pramater Cache per Shader Engine (default depending on gfx)" );module_param_named (param_buf_per_se, amdgpu_param_buf_per_se, int,0444 ); +/** +* DOC: job_hang_limit (int) +* Set how much time allow a job hang and not drop it. The default is 0. +*/ MODULE_PARM_DESC (job_hang_limit,"how much time allow a job hang and not drop it (default 0)" );module_param_named (job_hang_limit, amdgpu_job_hang_limit, int ,0444 ); +/** +* DOC: lbpw (int) +* Override Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable). The default is -1 (auto, enabled). +*/ MODULE_PARM_DESC (lbpw,"Load Balancing Per Watt (LBPW) support (1 = enable, 0 = disable, -1 = auto)" );module_param_named (lbpw, amdgpu_lbpw, int,0444 );MODULE_PARM_DESC (compute_multipipe,"Force compute queues to be spread across pipes (1 = enable, 0 = disable, -1 = auto)" );module_param_named (compute_multipipe, amdgpu_compute_multipipe, int,0444 ); +/**
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c module_param_named(no_evict, amdgpu_no_evict, int, 0444); · line 632
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +7
-0+* DOC: gpu_recovery (int) +* Set to enable GPU recovery mechanism (1 = enable, 0 = disable). The default is -1 (auto, disabled except SRIOV). +*/ MODULE_PARM_DESC (gpu_recovery,"Enable GPU recovery mechanism, (1 = enable, 0 = disable, -1 = auto)" );module_param_named (gpu_recovery, amdgpu_gpu_recovery, int,0444 ); +/** +* DOC: emu_mode (int) +* Set value 1 to enable emulation mode. The default is 0 (disabled). +*/
This is only needed when running on an emulator.
Quoted 40 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +17
-1MODULE_PARM_DESC (emu_mode,"Emulation mode, (1 = enable, 0 = disable)" );module_param_named (emu_mode, amdgpu_emu_mode, int,0444 ); +/** +* DOC: si_support (int) +* Set SI support driver. This parameter works after set config CONFIG_DRM_AMDGPU_SI. For SI asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_SI #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -306,6 +652,12 @@ MODULE_PARM_DESC(si_support, "SI support (1 = enabled (default), 0 = disabled)")module_param_named (si_support, amdgpu_si_support, int,0444 );#endif +/** +* DOC: cik_support (int) +* Set CIK support driver. This parameter works after set config CONFIG_DRM_AMDGPU_CIK. For CIK asic, when radeon driver is enabled, +* set value 0 to use radeon driver, while set value 1 to use amdgpu driver. The default is using radeon driver when it available, +* otherwise using amdgpu driver. +*/ #ifdef CONFIG_DRM_AMDGPU_CIK #if defined(CONFIG_DRM_RADEON ) || defined(CONFIG_DRM_RADEON_MODULE )@@ -319,6 +671,11 @@ MODULE_PARM_DESC(cik_support, "CIK support (1 = enabled (default), 0 = disabled)module_param_named (cik_support, amdgpu_cik_support, int,0444 );#endif +/** +* DOC: smu_memory_pool_size (uint) +* It is used to reserve gtt for smu debug usage, setting value 0 to disable it. The actual size is value * 256MiB. +* E.g. 0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte. The default is 0 (disabled). +*/ MODULE_PARM_DESC (smu_memory_pool_size,"reserve gtt for smu debug usage, 0 = disable," "0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte" ); --2.7.4
Quoted 4 lines
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx