Add minimal boot support for IPQ6018
Subsystems (7)
v6 cover Add minimal boot support for IPQ6018
The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers, Gateways and Access Points.
This series adds minimal board boot support for ipq6018-cp01 board.
[V6]
* Addressed more review comments on pinctrl bindings from Rob.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,
https://lkml.org/lkml/2020/1/9/84
[V5]
* Addressed review comments in pinctrl bindings from Rob.
* Ran make dt_binding_check with modified patch.
* Added fixed rate clocks in gcc clock controller node.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,
https://lkml.org/lkml/2020/1/9/84
[v4]
* Addressed review comments in pinctrl bindings from Rob.
* Ran make dt_binding_check and no issues was reported.
* Deleted absahu email id from patch 4, since its bouncing now.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,
https://lkml.org/lkml/2020/1/9/84
[V3]
* Removed clock driver and bindings from this patch series, and added them as a different series.
* Removed qpic_padN from pinctrl driver.
* Addressed review comments in dts, and added the remaining fixed clocks their
* Fixed review comments in pinctrl bindings
[v2]
* Splitted dt bindings and driver into different patches. Added missing bindings and some style changes.
* Added ipq6018 schema
* Addressed review comments for gcc clock bindings.
* Removed all clk critical flags, removed 1/1 factor clocks, moved to new way of specifying clk parents, and addressed other review comments.
* Sorted nodes based on address, name, label. Removed unused clock nodes, Addressed other review comments.
Sricharan R (5):
dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
pinctrl: qcom: Add ipq6018 pinctrl driver
dt-bindings: qcom: Add ipq6018 bindings
arm64: dts: Add ipq6018 SoC and CP01 board support
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
Documentation/devicetree/bindings/arm/qcom.yaml | 8 + .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 174 +++ arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 30 + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 263 +++++ arch/arm64/configs/defconfig | 3 + drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++ 9 files changed, 1597 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c
Signature · 1 line
1.9.1
PATCH v6 1/5 dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Add device tree binding Documentation details for ipq6018 pinctrl driver.
---
[V6]
* Addressed review comments form Rob.
.../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +153 -0
@@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block + +maintainers: + - Sricharan R <[email protected]> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ6018 platform. + +properties: + compatible: + const: qcom,ipq6018-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pinmux$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + allOf: + - $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] + minItems: 1 + maxItems: 4 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, + blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, + blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, + blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + + serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };
Signature · 1 line
2.7.4
Re: [PATCH V6 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Quoted 11 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>
Quoted 7 lines
---
[V6]
* Addressed review comments form Rob..../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
Re: [PATCH V6 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Hi,
Quoted 20 lines · Rob Herring
Quoted 11 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Quoted 7 lines
---
[V6]
* Addressed review comments form Rob..../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
Quoted 1 line
Reviewed-by Rob Herring <[email protected]>
Thanks Rob.
Hi Linus,
The pinctrl driver can now be pulled in.
Regards,
Sricharan
Signature · 1 line
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Re: [PATCH V6 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Hi Rob,
Quoted 23 lines · Sricharan R
Hi,
Quoted 20 lines · Rob Herring
Quoted 18 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>---
[V6]
* Addressed review comments form Rob..../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
Quoted 5 lines
Quoted 1 line
Reviewed-by Rob Herring <[email protected]>Thanks Rob.
Hi Linus,
The pinctrl driver can now be pulled in.
Any chance this can be taken for 5.6 ?
Regards,
Sricharan
Signature · 1 line
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Re: [PATCH V6 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Hi Linus,
Quoted 26 lines · Sricharan R
Hi Rob,
Quoted 23 lines · Sricharan R
Hi,
Quoted 20 lines · Rob Herring
Quoted 18 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>---
[V6]
* Addressed review comments form Rob..../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 153 +++++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Reviewed-by Rob Herring <[email protected]>Thanks Rob.
Hi Linus,
The pinctrl driver can now be pulled in.Any chance this can be taken for 5.6 ?
Can the pinctrl driver be taken for 5.6 by any chance ?
Regards,
Sricharan
Signature · 1 line
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Re: [PATCH V6 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
In reply to Sricharan RQuoted 11 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>
Quoted 2 lines
---
[V6]
Patch applied for v5.7 with Rob's Review tag.
Yours,
Linus Walleij
PATCH v6 2/5 pinctrl: qcom: Add ipq6018 pinctrl driver
In reply to Sricharan RAdd initial pinctrl driver to support pin configuration with pinctrl framework for ipq6018.
--- drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++++++++++++++ 3 files changed, 1118 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c
drivers/pinctrl/qcom/Kconfig +10 -0
@@ -50,6 +50,16 @@ config PINCTRL_IPQ8074 Qualcomm Technologies Inc. IPQ8074 platform. Select this for IPQ8074. +config PINCTRL_IPQ6018 + tristate "Qualcomm Technologies, Inc. IPQ6018 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for + the Qualcomm Technologies Inc. TLMM block found on the + Qualcomm Technologies Inc. IPQ6018 platform. Select this for + IPQ6018. + config PINCTRL_MSM8660 tristate "Qualcomm 8660 pin controller driver" depends on GPIOLIB && OF
drivers/pinctrl/qcom/Makefile +1 -0
@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o +obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
drivers/pinctrl/qcom/pinctrl-ipq6018.c new file +1107 -0
1,107 lines not on this page · raw message
Signature · 1 line
2.7.4
Re: [PATCH V6 2/5] pinctrl: qcom: Add ipq6018 pinctrl driver
Quoted 11 lines · Sricharan R
Add initial pinctrl driver to support pin configuration with pinctrl framework for ipq6018.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Reviewed-by Bjorn Andersson <[email protected]>Signed-off-by Sricharan R <[email protected]>
Patch applied for v5.7.
Yours,
Linus Walleij
PATCH v6 3/5 dt-bindings: qcom: Add ipq6018 bindings
In reply to Sricharan RDocument the new ipq6018 SOC/board device tree bindings.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +8 -0
@@ -28,6 +28,7 @@ description: | apq8074 apq8084 apq8096 + ipq6018 ipq8074 mdm9615 msm8916
@@ -41,6 +42,7 @@ description: | The 'board' element must be one of the following strings: cdp + cp01-c1 dragonboard hk01 idp
@@ -150,4 +152,10 @@ properties: - enum: - qcom,sc7180-idp - const: qcom,sc7180 + + - items: + - enum: + - qcom,ipq6018-cp01-c1 + - const: qcom,ipq6018 + ...
Signature · 1 line
2.7.4
PATCH v6 4/5 arm64: dts: Add ipq6018 SoC and CP01 board support
In reply to Sricharan RAdd initial device tree support for the Qualcomm IPQ6018 SoC and CP01 evaluation board.
--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 30 ++++ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 217 +++++++++++++++++++++++++++ 3 files changed, 248 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ6018 CP01 board device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "ipq6018.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1"; + compatible = "qcom,ipq6018-cp01", "qcom,ipq6018"; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " swiotlb=1"; + }; +}; + +&blsp1_uart3 { + pinctrl-0 = <&serial_3_pins>; + pinctrl-names = "default"; + status = "ok"; +};
arch/arm64/boot/dts/qcom/ipq6018.dtsi new file +217 -0
217 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v6 5/5 arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
In reply to Sricharan RThese configs are required for booting kernel in qcom ipq6018 boards.
--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
@@ -405,6 +405,7 @@ CONFIG_PINCTRL_IMX8MN=y CONFIG_PINCTRL_IMX8MQ=y CONFIG_PINCTRL_IMX8QXP=y CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ6018=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y
@@ -718,6 +719,7 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_8074=y +CONFIG_IPQ_GCC_6018=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y
Signature · 1 line
2.7.4
Quoted 10 lines · Sricharan R
The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers, Gateways and Access Points.
This series adds minimal board boot support for ipq6018-cp01 board.
[V6]
* Addressed more review comments on pinctrl bindings from Rob.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,https://lkml.org/lkml/2020/1/9/84
I have applied patches 1 & 2 and the remaining patches can be applied to the ARM SoC-relavent tree (Bjorn can handle this I think?)
I am sorry it didn't make it into v5.6, this is caused by the bottleneck for YAML schema review, we would appreciate more people participating in writing and reviewing new schemas, we are currently in a bit of learning phase.
Yours,
Linus Walleij