Skip to content

Add minimal boot support for IPQ6018

Sricharan R linux-arm-kernel linux-arm-msm linux-devicetree linux-gpio lkml 6 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest5 patches 7 repliesIn review
  2. v55 patches 2 repliesSuperseded
  3. v45 patches 2 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v35 patches6 repliesSuperseded
v27 patches11 repliesSuperseded
v16 patches6 repliesSuperseded

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindingsDocumentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml+153 -05 replies
2/5pinctrl: qcom: Add ipq6018 pinctrl driverdrivers/pinctrl/qcom/Kconfig drivers/pinctrl/qcom/Makefile drivers/pinctrl/qcom/pinctrl-ipq6018.c+1118 -01 reply
3/5dt-bindings: qcom: Add ipq6018 bindingsDocumentation/devicetree/bindings/arm/qcom.yaml+8 -00 replies
4/5arm64: dts: Add ipq6018 SoC and CP01 board supportarch/arm64/boot/dts/qcom/Makefile arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts arch/arm64/boot/dts/qcom/ipq6018.dtsi+248 -00 replies
5/5arm64: defconfig: Enable qcom ipq6018 clock and pinctrlarch/arm64/configs/defconfig+2 -00 replies

Reviews trailers per patch

4 of 5 patches have a Reviewed-by or Acked-by.

PatchRob HerringBjorn Andersson
1/5R-b
2/5R-b
3/5R-b
4/5
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH V6 0/5] Add minimal boot support for IPQ6018

The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers, Gateways and Access Points.

This series adds minimal board boot support for ipq6018-cp01 board.

[V6]
* Addressed more review comments on pinctrl bindings from Rob.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,

	https://lkml.org/lkml/2020/1/9/84

[V5]
* Addressed review comments in pinctrl bindings from Rob.
* Ran make dt_binding_check with modified patch.
* Added fixed rate clocks in gcc clock controller node.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,

        https://lkml.org/lkml/2020/1/9/84

[v4]
* Addressed review comments in pinctrl bindings from Rob.
* Ran make dt_binding_check and no issues was reported.
* Deleted absahu email id from patch 4, since its bouncing now.
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,

	https://lkml.org/lkml/2020/1/9/84

[V3]
* Removed clock driver and bindings from this patch series, and added them as a different series.
* Removed qpic_padN from pinctrl driver.
* Addressed review comments in dts, and added the remaining fixed clocks their
* Fixed review comments in pinctrl bindings

[v2]
* Splitted dt bindings and driver into different patches. Added missing bindings and some style changes.
* Added ipq6018 schema
* Addressed review comments for gcc clock bindings.
* Removed all clk critical flags, removed 1/1 factor clocks, moved to new way of specifying clk parents, and addressed other review comments.
* Sorted nodes based on address, name, label. Removed unused clock nodes, Addressed other review comments.

Sricharan R (5):
dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
pinctrl: qcom: Add ipq6018 pinctrl driver
dt-bindings: qcom: Add ipq6018 bindings
arm64: dts: Add ipq6018 SoC and CP01 board support
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl

 Documentation/devicetree/bindings/arm/qcom.yaml    |    8 +
 .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml     |  174 +++
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts       |   30 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |  263 +++++
 arch/arm64/configs/defconfig                       |    3 +
 drivers/pinctrl/qcom/Kconfig                       |   10 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq6018.c             | 1107 ++++++++++++++++++++
 9 files changed, 1597 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c
Signature · 1 line
1.9.1