Add BLK_CTL support for i.MX8MP
Subsystems (5)
v3 cover Add BLK_CTL support for i.MX8MP
The BLK_CTL according to HW design is basically the wrapper of the entire function specific group of IPs and holds GPRs that usually cannot be placed into one specific IP from that group. Some of these GPRs are used to control some clocks, other some resets, others some very specific function that does not fit into clocks or resets. Since the clocks are registered using the i.MX clock subsystem API, the driver is placed into the clock subsystem, but it also registers the resets. For the other functionalities that other GPRs might have, the syscon is used.
Changes since v2:
* Made the naming consistent with the RM: BLK_CTL (not BLK_CTRL)
* fixed the reset set procedure as discussed with Philipp Zabel
* removed the patch that includes the imx8mp-reset header in dtsi as there is no user yet.
* added i.MX8MP specific blk_ctl driver as suggested by Aisheng Dong
Abel Vesa (14):
dt-bindings: clocks: imx8mp: Rename audiomix ids clocks to
audio_blk_ctl
dt-bindings: reset: imx8mp: Add audio blk_ctl reset IDs
dt-bindings: clock: imx8mp: Add ids for the audio shared gate
dt-bindings: clock: imx8mp: Add media blk_ctl clock IDs
dt-bindings: reset: imx8mp: Add media blk_ctl reset IDs
dt-bindings: clock: imx8mp: Add hdmi blk_ctl clock IDs
dt-bindings: reset: imx8mp: Add hdmi blk_ctl reset IDs
clk: imx8mp: Add audio shared gate
Documentation: bindings: clk: Add bindings for i.MX BLK_CTL
clk: imx: Add generic blk-ctl driver
clk: imx: Add blk-ctl driver for i.MX8MP
arm64: dts: imx8mp: Add audio_blk_ctl node
arm64: dts: imx8mp: Add media_blk_ctl node
arm64: dts: imx8mp: Add hdmi_blk_ctl node
.../devicetree/bindings/clock/fsl,imx-blk-ctl.yaml | 60 ++++ arch/arm64/boot/dts/freescale/imx8mp.dtsi | 37 +++ drivers/clk/imx/Makefile | 2 +- drivers/clk/imx/clk-blk-ctl-imx8mp.c | 313 +++++++++++++++++++++ drivers/clk/imx/clk-blk-ctl.c | 297 +++++++++++++++++++ drivers/clk/imx/clk-blk-ctl.h | 80 ++++++ drivers/clk/imx/clk-imx8mp.c | 12 +- include/dt-bindings/clock/imx8mp-clock.h | 200 +++++++++---- include/dt-bindings/reset/imx8mp-reset.h | 45 +++ 9 files changed, 983 insertions(+), 63 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml create mode 100644 drivers/clk/imx/clk-blk-ctl-imx8mp.c create mode 100644 drivers/clk/imx/clk-blk-ctl.c create mode 100644 drivers/clk/imx/clk-blk-ctl.h
Signature · 1 line
2.7.4
PATCH v3 1/14 dt-bindings: clocks: imx8mp: Rename audiomix ids clocks to audio_blk_ctl
In the reference manual the actual name is Audio BLK_CTL.
Lets make it more obvious here by renaming from audiomix to audio_blk_ctl.
--- include/dt-bindings/clock/imx8mp-clock.h | 120 +++++++++++++++---------------- 1 file changed, 60 insertions(+), 60 deletions(-)
include/dt-bindings/clock/imx8mp-clock.h +60 -60
@@ -324,66 +324,66 @@#define IMX8MP_CLK_END 313 -#define IMX8MP_CLK_AUDIOMIX_SAI1_IPG 0 -#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1 1 -#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2 2 -#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3 3 -#define IMX8MP_CLK_AUDIOMIX_SAI2_IPG 4 -#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1 5 -#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2 6 -#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3 7 -#define IMX8MP_CLK_AUDIOMIX_SAI3_IPG 8 -#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1 9 -#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2 10 -#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3 11 -#define IMX8MP_CLK_AUDIOMIX_SAI5_IPG 12 -#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1 13 -#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2 14 -#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3 15 -#define IMX8MP_CLK_AUDIOMIX_SAI6_IPG 16 -#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1 17 -#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2 18 -#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3 19 -#define IMX8MP_CLK_AUDIOMIX_SAI7_IPG 20 -#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1 21 -#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2 22 -#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3 23 -#define IMX8MP_CLK_AUDIOMIX_ASRC_IPG 24 -#define IMX8MP_CLK_AUDIOMIX_PDM_IPG 25 -#define IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT 26 -#define IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT 27 -#define IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT 28 -#define IMX8MP_CLK_AUDIOMIX_DSP_ROOT 29 -#define IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT 30 -#define IMX8MP_CLK_AUDIOMIX_EARC_IPG 31 -#define IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG 32 -#define IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG 33 -#define IMX8MP_CLK_AUDIOMIX_EDMA_ROOT 34 -#define IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT 35 -#define IMX8MP_CLK_AUDIOMIX_MU2_ROOT 36 -#define IMX8MP_CLK_AUDIOMIX_MU3_ROOT 37 -#define IMX8MP_CLK_AUDIOMIX_EARC_PHY 38 -#define IMX8MP_CLK_AUDIOMIX_PDM_ROOT 39 -#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1_SEL 40 -#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2_SEL 41 -#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1_SEL 42 -#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2_SEL 43 -#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1_SEL 44 -#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2_SEL 45 -#define IMX8MP_CLK_AUDIOMIX_SAI4_MCLK1_SEL 46 -#define IMX8MP_CLK_AUDIOMIX_SAI4_MCLK2_SEL 47 -#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1_SEL 48 -#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2_SEL 49 -#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1_SEL 50 -#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2_SEL 51 -#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1_SEL 52 -#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2_SEL 53 -#define IMX8MP_CLK_AUDIOMIX_PDM_SEL 54 -#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_REF_SEL 55 -#define IMX8MP_CLK_AUDIOMIX_SAI_PLL 56 -#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS 57 -#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT 58 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_IPG 0 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1 1 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK2 2 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK3 3 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_IPG 4 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK1 5 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK2 6 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK3 7 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_IPG 8 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK1 9 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK2 10 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK3 11 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_IPG 12 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK1 13 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK2 14 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK3 15 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_IPG 16 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK1 17 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK2 18 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK3 19 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_IPG 20 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK1 21 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK2 22 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK3 23 +#define IMX8MP_CLK_AUDIO_BLK_CTL_ASRC_IPG 24 +#define IMX8MP_CLK_AUDIO_BLK_CTL_PDM_IPG 25 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SDMA2_ROOT 26 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SDMA3_ROOT 27 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SPBA2_ROOT 28 +#define IMX8MP_CLK_AUDIO_BLK_CTL_DSP_ROOT 29 +#define IMX8MP_CLK_AUDIO_BLK_CTL_DSPDBG_ROOT 30 +#define IMX8MP_CLK_AUDIO_BLK_CTL_EARC_IPG 31 +#define IMX8MP_CLK_AUDIO_BLK_CTL_OCRAMA_IPG 32 +#define IMX8MP_CLK_AUDIO_BLK_CTL_AUD2HTX_IPG 33 +#define IMX8MP_CLK_AUDIO_BLK_CTL_EDMA_ROOT 34 +#define IMX8MP_CLK_AUDIO_BLK_CTL_AUDPLL_ROOT 35 +#define IMX8MP_CLK_AUDIO_BLK_CTL_MU2_ROOT 36 +#define IMX8MP_CLK_AUDIO_BLK_CTL_MU3_ROOT 37 +#define IMX8MP_CLK_AUDIO_BLK_CTL_EARC_PHY 38 +#define IMX8MP_CLK_AUDIO_BLK_CTL_PDM_ROOT 39 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1_SEL 40 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK2_SEL 41 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK1_SEL 42 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK2_SEL 43 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK1_SEL 44 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK2_SEL 45 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI4_MCLK1_SEL 46 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI4_MCLK2_SEL 47 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK1_SEL 48 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK2_SEL 49 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK1_SEL 50 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK2_SEL 51 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK1_SEL 52 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK2_SEL 53 +#define IMX8MP_CLK_AUDIO_BLK_CTL_PDM_SEL 54 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL_REF_SEL 55 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL 56 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL_BYPASS 57 +#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL_OUT 58 -#define IMX8MP_CLK_AUDIOMIX_END 59 +#define IMX8MP_CLK_AUDIO_BLK_CTL_END 59#endif
Signature · 1 line
2.7.4
PATCH v3 2/14 dt-bindings: reset: imx8mp: Add audio blk_ctl reset IDs
In reply to Abel VesaThese will be used by the imx8mp for blk_ctl driver.
--- include/dt-bindings/reset/imx8mp-reset.h | 5 +++++ 1 file changed, 5 insertions(+)
include/dt-bindings/reset/imx8mp-reset.h +5 -0
@@ -47,4 +47,9 @@#define IMX8MP_RESET_NUM 38 +#define IMX8MP_AUDIO_BLK_CTL_EARC_RESET 0 +#define IMX8MP_AUDIO_BLK_CTL_EARC_PHY_RESET 1 + +#define IMX8MP_AUDIO_BLK_CTL_RESET_NUM 2 +#endif
Signature · 1 line
2.7.4
PATCH v3 3/14 dt-bindings: clock: imx8mp: Add ids for the audio shared gate
In reply to Abel VesaAll these IDs are for one single HW gate (CCGR101) that is shared between these root clocks.
--- include/dt-bindings/clock/imx8mp-clock.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
include/dt-bindings/clock/imx8mp-clock.h +11 -1
@@ -322,7 +322,17 @@#define IMX8MP_CLK_HSIO_AXI 311#define IMX8MP_CLK_MEDIA_ISP 312 -#define IMX8MP_CLK_END 313 +#define IMX8MP_CLK_AUDIO_AHB_ROOT 313 +#define IMX8MP_CLK_AUDIO_AXI_ROOT 314 +#define IMX8MP_CLK_SAI1_ROOT 315 +#define IMX8MP_CLK_SAI2_ROOT 316 +#define IMX8MP_CLK_SAI3_ROOT 317 +#define IMX8MP_CLK_SAI5_ROOT 318 +#define IMX8MP_CLK_SAI6_ROOT 319 +#define IMX8MP_CLK_SAI7_ROOT 320 +#define IMX8MP_CLK_PDM_ROOT 321 + +#define IMX8MP_CLK_END 322#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_IPG 0#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1 1
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
RE: [PATCH v3 03/14] dt-bindings: clock: imx8mp: Add ids for the audio shared gate
Quoted 8 lines
From: Abel Vesa <[email protected]>
Sent: Tuesday, September 8, 2020 6:25 PMAll these IDs are for one single HW gate (CCGR101) that is shared between these root clocks.
Signed-off-by Abel Vesa <[email protected]>Acked-by Rob Herring <[email protected]>
Seems missed my tag.
So:
Regards
Aisheng
Quoted 30 lines
--- include/dt-bindings/clock/imx8mp-clock.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)include/dt-bindings/clock/imx8mp-clock.h +11
-2@@ -322,7 +322,17 @@#define IMX8MP_CLK_HSIO_AXI 311#define IMX8MP_CLK_MEDIA_ISP 312 -#define IMX8MP_CLK_END 313 +#define IMX8MP_CLK_AUDIO_AHB_ROOT 313 +#define IMX8MP_CLK_AUDIO_AXI_ROOT 314 +#define IMX8MP_CLK_SAI1_ROOT 315 +#define IMX8MP_CLK_SAI2_ROOT 316 +#define IMX8MP_CLK_SAI3_ROOT 317 +#define IMX8MP_CLK_SAI5_ROOT 318 +#define IMX8MP_CLK_SAI6_ROOT 319 +#define IMX8MP_CLK_SAI7_ROOT 320 +#define IMX8MP_CLK_PDM_ROOT 321 + +#define IMX8MP_CLK_END 322#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_IPG 0#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1 1 --2.7.4
PATCH v3 4/14 dt-bindings: clock: imx8mp: Add media blk_ctl clock IDs
In reply to Abel VesaThese will be used by the imx8mp for blk_ctl driver.
--- include/dt-bindings/clock/imx8mp-clock.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
include/dt-bindings/clock/imx8mp-clock.h +28 -0
@@ -396,4 +396,32 @@#define IMX8MP_CLK_AUDIO_BLK_CTL_END 59 +#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_DSI_PCLK 0 +#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_DSI_CLKREF 1 +#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI_PCLK 2 +#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI_ACLK 3 +#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF_PIXEL 4 +#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF_APB 5 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISI_PROC 6 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISI_APB 7 +#define IMX8MP_CLK_MEDIA_BLK_CTL_BUS_BLK 8 +#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI2_PCLK 9 +#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI2_ACLK 10 +#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF2_PIXEL 11 +#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF2_APB 12 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP1_COR 13 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP1_AXI 14 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP1_AHB 15 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP0_COR 16 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP0_AXI 17 +#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP0_AHB 18 +#define IMX8MP_CLK_MEDIA_BLK_CTL_DWE_COR 19 +#define IMX8MP_CLK_MEDIA_BLK_CTL_DWE_AXI 20 +#define IMX8MP_CLK_MEDIA_BLK_CTL_DWE_AHB 21 +#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_DSI2 22 +#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF_AXI 23 +#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF2_AXI 24 + +#define IMX8MP_CLK_MEDIA_BLK_CTL_END 25 +#endif
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 5/14 dt-bindings: reset: imx8mp: Add media blk_ctl reset IDs
In reply to Abel VesaThese will be used by the imx8mp for blk_ctl driver.
--- include/dt-bindings/reset/imx8mp-reset.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
include/dt-bindings/reset/imx8mp-reset.h +28 -0
@@ -52,4 +52,32 @@#define IMX8MP_AUDIO_BLK_CTL_RESET_NUM 2 +#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_DSI_PCLK 0 +#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_DSI_CLKREF 1 +#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI_PCLK 2 +#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI_ACLK 3 +#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF_PIXEL 4 +#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF_APB 5 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISI_PROC 6 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISI_APB 7 +#define IMX8MP_MEDIA_BLK_CTL_RESET_BUS_BLK 8 +#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI2_PCLK 9 +#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI2_ACLK 10 +#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF2_PIXEL 11 +#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF2_APB 12 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP1_COR 13 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP1_AXI 14 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP1_AHB 15 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP0_COR 16 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP0_AXI 17 +#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP0_AHB 18 +#define IMX8MP_MEDIA_BLK_CTL_RESET_DWE_COR 19 +#define IMX8MP_MEDIA_BLK_CTL_RESET_DWE_AXI 20 +#define IMX8MP_MEDIA_BLK_CTL_RESET_DWE_AHB 21 +#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_DSI2 22 +#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF_AXI 23 +#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF2_AXI 24 + +#define IMX8MP_MEDIA_BLK_CTL_RESET_NUM 25 +#endif
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 6/14 dt-bindings: clock: imx8mp: Add hdmi blk_ctl clock IDs
In reply to Abel VesaThese will be used by the imx8mp for blk_ctl driver.
--- include/dt-bindings/clock/imx8mp-clock.h | 40 ++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
include/dt-bindings/clock/imx8mp-clock.h +40 -0
@@ -424,4 +424,44 @@#define IMX8MP_CLK_MEDIA_BLK_CTL_END 25 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_APB_CLK 0 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_B_CLK 1 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_REF266M_CLK 2 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL24M_CLK 3 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL32K_CLK 4 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_TX_PIX_CLK 5 +#define IMX8MP_CLK_HDMI_BLK_CTL_IRQS_STEER_CLK 6 +#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDMI_CLK 7 +#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDCP_CLK 8 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_APB_CLK 9 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_B_CLK 10 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PDI_CLK 11 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PIX_CLK 12 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_SPU_CLK 13 +#define IMX8MP_CLK_HDMI_BLK_CTL_FDCC_REF_CLK 14 +#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_APB_CLK 15 +#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_B_CLK 16 +#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_CEA_CLK 17 +#define IMX8MP_CLK_HDMI_BLK_CTL_VSFD_CEA_CLK 18 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_HPI_CLK 19 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_APB_CLK 20 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_CEC_CLK 21 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_ESM_CLK 22 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_GPA_CLK 23 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIXEL_CLK 24 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SFR_CLK 25 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SKP_CLK 26 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PREP_CLK 27 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_APB_CLK 28 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_INT_CLK 29 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SEC_MEM_CLK 30 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_SKP_CLK 31 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_VID_LINK_PIX_CLK 32 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_APB_CLK 33 +#define IMX8MP_CLK_HDMI_BLK_CTL_HTXPHY_CLK_SEL 34 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_CLK_SEL 35 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIPE_CLK_SEL 36 + +#define IMX8MP_CLK_HDMI_BLK_CTL_END 37 +#endif
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
RE: [PATCH v3 06/14] dt-bindings: clock: imx8mp: Add hdmi blk_ctl clock IDs
Quoted 7 lines
From: Abel Vesa <[email protected]>
Sent: Tuesday, September 8, 2020 6:25 PMThese will be used by the imx8mp for
blk_ctldriver.Signed-off-by Abel Vesa <[email protected]>Acked-by Rob Herring <[email protected]>
Regards
Aisheng
Quoted 57 lines
--- include/dt-bindings/clock/imx8mp-clock.h | 40 ++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)include/dt-bindings/clock/imx8mp-clock.h +40
-1@@ -424,4 +424,44 @@#define IMX8MP_CLK_MEDIA_BLK_CTL_END 25 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_APB_CLK 0 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_B_CLK 1 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_REF266M_CLK 2 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL24M_CLK 3 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL32K_CLK 4 +#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_TX_PIX_CLK 5 +#define IMX8MP_CLK_HDMI_BLK_CTL_IRQS_STEER_CLK 6 +#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDMI_CLK 7 +#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDCP_CLK 8 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_APB_CLK 9 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_B_CLK 10 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PDI_CLK 11 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PIX_CLK 12 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_SPU_CLK 13 +#define IMX8MP_CLK_HDMI_BLK_CTL_FDCC_REF_CLK 14 +#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_APB_CLK 15 +#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_B_CLK 16 +#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_CEA_CLK 17 +#define IMX8MP_CLK_HDMI_BLK_CTL_VSFD_CEA_CLK 18 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_HPI_CLK 19 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_APB_CLK 20 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_CEC_CLK 21 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_ESM_CLK 22 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_GPA_CLK 23 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIXEL_CLK 24 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SFR_CLK 25 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SKP_CLK 26 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PREP_CLK 27 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_APB_CLK 28 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_INT_CLK 29 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SEC_MEM_CLK 30 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_SKP_CLK 31 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_VID_LINK_PIX_CLK 32 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_APB_CLK 33 +#define IMX8MP_CLK_HDMI_BLK_CTL_HTXPHY_CLK_SEL 34 +#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_CLK_SEL 35 +#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIPE_CLK_SEL 36 + +#define IMX8MP_CLK_HDMI_BLK_CTL_END 37 +#endif --2.7.4
PATCH v3 7/14 dt-bindings: reset: imx8mp: Add hdmi blk_ctl reset IDs
In reply to Abel VesaThese will be used imx8mp for blk_ctl driver.
--- include/dt-bindings/reset/imx8mp-reset.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
include/dt-bindings/reset/imx8mp-reset.h +12 -0
@@ -80,4 +80,16 @@#define IMX8MP_MEDIA_BLK_CTL_RESET_NUM 25 +#define IMX8MP_HDMI_BLK_CTL_HDMI_TX_RESET 0 +#define IMX8MP_HDMI_BLK_CTL_HDMI_PHY_RESET 1 +#define IMX8MP_HDMI_BLK_CTL_HDMI_PAI_RESET 2 +#define IMX8MP_HDMI_BLK_CTL_HDMI_PVI_RESET 3 +#define IMX8MP_HDMI_BLK_CTL_HDMI_TRNG_RESET 4 +#define IMX8MP_HDMI_BLK_CTL_IRQ_STEER_RESET 5 +#define IMX8MP_HDMI_BLK_CTL_HDMI_HDCP_RESET 6 +#define IMX8MP_HDMI_BLK_CTL_LCDIF_RESET 7 + +#define IMX8MP_HDMI_BLK_CTL_RESET_NUM 8 + +#endif
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 8/14 clk: imx8mp: Add audio shared gate
In reply to Abel VesaAccording to the RM, the CCGR101 is shared for the following root clocks:
- AUDIO_AHB_CLK_ROOT
- AUDIO_AXI_CLK_ROOT
- SAI2_CLK_ROOT
- SAI3_CLK_ROOT
- SAI5_CLK_ROOT
- SAI6_CLK_ROOT
- SAI7_CLK_ROOT
- PDM_CLK_ROOT
--- drivers/clk/imx/clk-imx8mp.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/clk/imx/clk-imx8mp.c +11 -1
@@ -17,6 +17,7 @@static u32 share_count_nand;static u32 share_count_media; +static u32 share_count_audio;static const char *const pll_ref_sels[] = {"osc_24m" ,"dummy" ,"dummy" ,"dummy" , };static const char *const audio_pll1_bypass_sels[] = {"audio_pll1" ,"audio_pll1_ref_sel" , };
@@ -725,7 +726,16 @@ static int imx8mp_clocks_probe(struct platform_device *pdev) hws[IMX8MP_CLK_HDMI_ROOT ] =imx_clk_hw_gate4 ("hdmi_root_clk" ,"hdmi_axi" , ccm_base +0x45f0 ,0 ); hws[IMX8MP_CLK_TSENSOR_ROOT ] =imx_clk_hw_gate4 ("tsensor_root_clk" ,"ipg_root" , ccm_base +0x4620 ,0 ); hws[IMX8MP_CLK_VPU_ROOT ] =imx_clk_hw_gate4 ("vpu_root_clk" ,"vpu_bus" , ccm_base +0x4630 ,0 ); - hws[IMX8MP_CLK_AUDIO_ROOT ] =imx_clk_hw_gate4 ("audio_root_clk" ,"ipg_root" , ccm_base +0x4650 ,0 ); + + hws[IMX8MP_CLK_AUDIO_AHB_ROOT ] =imx_clk_hw_gate2_shared2 ("audio_ahb_root" ,"audio_ahb" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_AUDIO_AXI_ROOT ] =imx_clk_hw_gate2_shared2 ("audio_axi_root" ,"audio_axi" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_SAI1_ROOT ] =imx_clk_hw_gate2_shared2 ("sai1_root" ,"sai1" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_SAI2_ROOT ] =imx_clk_hw_gate2_shared2 ("sai2_root" ,"sai2" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_SAI3_ROOT ] =imx_clk_hw_gate2_shared2 ("sai3_root" ,"sai3" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_SAI5_ROOT ] =imx_clk_hw_gate2_shared2 ("sai5_root" ,"sai5" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_SAI6_ROOT ] =imx_clk_hw_gate2_shared2 ("sai6_root" ,"sai6" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_SAI7_ROOT ] =imx_clk_hw_gate2_shared2 ("sai7_root" ,"sai7" , ccm_base +0x4650 ,0 , &share_count_audio); + hws[IMX8MP_CLK_PDM_ROOT ] =imx_clk_hw_gate2_shared2 ("pdm_root" ,"pdm" , ccm_base +0x4650 ,0 , &share_count_audio); hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core", hws[IMX8MP_CLK_A53_CORE]->clk,
Signature · 7 lines
2.7.4 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 9/14 Documentation: bindings: clk: Add bindings for i.MX BLK_CTL
In reply to Abel VesaDocument the i.MX BLK_CTL with its devicetree properties.
--- .../devicetree/bindings/clock/fsl,imx-blk-ctl.yaml | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml
Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml new file +60 -0
@@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,imx-blk-ctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX BLK_CTL + +maintainers: + - Abel Vesa <[email protected]> + +description: + i.MX BLK_CTL is a conglomerate of different GPRs that are + dedicated to a specific subsystem. Because it usually contains + clocks amongst other things, it needs access to the i.MX clocks + API. All the other functionalities it provides can work just fine + from the clock subsystem tree. + +properties: + compatible: + items: + - enum: + - fsl,imx8mp-audio-blk-ctl + - fsl,imx8mp-hdmi-blk-ctl + - fsl,imx8mp-media-blk-ctl + - const: syscon + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - power-domains + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + + audio_blk_ctl: clock-controller@30e20000 { + compatible = "fsl,imx8mp-audio-blk-ctl", "syscon"; + reg = <0x30e20000 0x10000>; + power-domains = <&audiomix_pd>; + + #clock-cells = <1>; + #reset-cells = <1>; + };
Signature · 1 line
2.7.4
Re: [PATCH v3 09/14] Documentation: bindings: clk: Add bindings for i.MX BLK_CTL
Quoted 9 lines · Abel Vesa
Document the i.MX
BLK_CTLwith its devicetree properties.Signed-off-by Abel Vesa <[email protected]>Reviewed-by Dong Aisheng <[email protected]>--- .../devicetree/bindings/clock/fsl,imx-blk-ctl.yaml | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v3 10/14 clk: imx: Add generic blk-ctl driver
In reply to Abel VesaThe i.MX8MP platform introduces a new type of IP which is called BLK_CTL in RM and usually is comprised of some GPRs that are considered too generic to be part of any dedicated IP from that specific subsystem.
In general, some of the GPRs have some clock bits, some have reset bits, so in order to be able to use the imx clock API, this needs to be in a clock driver. From there it can use the reset controller API and leave the rest to the syscon.
--- drivers/clk/imx/Makefile | 2 +- drivers/clk/imx/clk-blk-ctl.c | 297 ++++++++++++++++++++++++++++++++++++++++++ drivers/clk/imx/clk-blk-ctl.h | 80 ++++++++++++ 3 files changed, 378 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/imx/clk-blk-ctl.c create mode 100644 drivers/clk/imx/clk-blk-ctl.h
drivers/clk/imx/Makefile +1 -1
@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o -obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o +obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o
drivers/clk/imx/clk-blk-ctl.c new file +297 -0
297 lines not on this page · raw message
drivers/clk/imx/clk-blk-ctl.h new file +80 -0
80 lines not on this page · raw message
Signature · 1 line
2.7.4
Re: [PATCH v3 10/14] clk: imx: Add generic blk-ctl driver
Quoted 55 lines · Abel Vesa
The i.MX8MP platform introduces a new type of IP which is called
BLK_CTLin RM and usually is comprised of some GPRs that are considered too generic to be part of any dedicated IP from that specific subsystem.In general, some of the GPRs have some clock bits, some have reset bits, so in order to be able to use the imx clock API, this needs to be in a clock driver. From there it can use the reset controller API and leave the rest to the syscon.
Signed-off-by Abel Vesa <[email protected]>--- drivers/clk/imx/Makefile | 2 +- drivers/clk/imx/clk-blk-ctl.c | 297 ++++++++++++++++++++++++++++++++++++++++++ drivers/clk/imx/clk-blk-ctl.h | 80 ++++++++++++ 3 files changed, 378 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/imx/clk-blk-ctl.c create mode 100644 drivers/clk/imx/clk-blk-ctl.hdrivers/clk/imx/Makefile +1
-1@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o -obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o +obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.odrivers/clk/imx/clk-blk-ctl.c new file +17
-0@@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright 2020 NXP. +*/ + +#include <linux/clk.h> +#include <linux/reset-controller.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/string.h>
drivers/clk/imx/clk-blk-ctl.c line 27
Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10
-0+#include <linux/types.h> + +#include "clk.h" +#include "clk-blk-ctl.h" + +struct imx_reset_hw { +u32 offset; +u32 shift; +u32 mask; +volatile unsigned long asserted;
Could you clarify a bit why need 'volatile' here?
Quoted 66 lines
drivers/clk/imx/clk-blk-ctl.c new file +66
-0+}; + +struct imx_pm_safekeep_info { +uint32_t *regs_values; +uint32_t *regs_offsets; +uint32_t regs_num; +}; + +struct imx_blk_ctl_drvdata { +void __iomem *base; +struct reset_controller_dev rcdev; +struct imx_reset_hw *rst_hws; +struct imx_pm_safekeep_info pm_info; + +spinlock_t lock; +}; + +static void __maybe_unused imx_blk_ctl_read_write (struct device *dev, +bool write) +{ +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info; +void __iomem *base = drvdata->base; +int i; + +if (!pm_info->regs_num) +return ; + +for (i =0 ; i < pm_info->regs_num; i++) { +u32 offset = pm_info->regs_offsets[i]; + +if (write) +writel (pm_info->regs_values[i], base + offset); +else + pm_info->regs_values[i] =readl (base + offset); + } + +} + +static int __maybe_unused imx_blk_ctl_runtime_suspend (struct device *dev) +{ +imx_blk_ctl_read_write (dev, false); + +return 0 ; +} + +static int __maybe_unused imx_blk_ctl_runtime_resume (struct device *dev) +{ +imx_blk_ctl_read_write (dev, true); + +return 0 ; +} + +const struct dev_pm_ops imx_blk_ctl_pm_ops = { + SET_RUNTIME_PM_OPS(imx_blk_ctl_runtime_suspend, + imx_blk_ctl_runtime_resume, NULL) +SET_SYSTEM_SLEEP_PM_OPS (pm_runtime_force_suspend, + pm_runtime_force_resume) +}; +EXPORT_SYMBOL_GPL (imx_blk_ctl_pm_ops); + +static int imx_blk_ctl_reset_set (struct reset_controller_dev *rcdev, +unsigned long id,bool assert) +{ +struct imx_blk_ctl_drvdata *drvdata =container_of (rcdev, + struct imx_blk_ctl_drvdata, rcdev);
drivers/clk/imx/clk-blk-ctl.c line 103
Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10
-0+unsigned int offset = drvdata->rst_hws[id].offset; +unsigned int shift = drvdata->rst_hws[id].shift; +unsigned int mask = drvdata->rst_hws[id].mask; +void __iomem *reg_addr = drvdata->base + offset; +unsigned long flags; +u32 reg; + +if (assert && !test_and_set_bit (1 , &drvdata->rst_hws[id].asserted)) +pm_runtime_get_sync (rcdev->dev); +
i'm a bit confused because each reset hw has a field 'asserted' which means you're doing bit operations on each separate private variable. Is that what we want?
BTW, what if user calling deassert first?
Will that cause writing registers without enabling power domain?
Quoted 112 lines
drivers/clk/imx/clk-blk-ctl.c new file +112
-0+spin_lock_irqsave (&drvdata->lock, flags); + + reg =readl (reg_addr); +if (assert) +writel (reg & ~(mask << shift), reg_addr); +else +writel (reg | (mask << shift), reg_addr); + +spin_unlock_irqrestore (&drvdata->lock, flags); + +if (!assert &&test_and_clear_bit (1 , &drvdata->rst_hws[id].asserted)) +pm_runtime_put (rcdev->dev); + +return 0 ; +} + +static int imx_blk_ctl_reset_assert (struct reset_controller_dev *rcdev, +unsigned long id) +{ +return imx_blk_ctl_reset_set (rcdev, id, true); +} + +static int imx_blk_ctl_reset_deassert (struct reset_controller_dev *rcdev, +unsigned long id) +{ +return imx_blk_ctl_reset_set (rcdev, id, false); +} + +static const struct reset_control_ops imx_blk_ctl_reset_ops = { + .assert = imx_blk_ctl_reset_assert, + .deassert = imx_blk_ctl_reset_deassert, +}; + +static int imx_blk_ctl_register_reset_controller (struct device *dev) +{ +const struct imx_blk_ctl_dev_data *dev_data =of_device_get_match_data (dev); +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +int max = dev_data->resets_max; +struct imx_reset_hw *hws; +int i; + +spin_lock_init (&drvdata->lock); + + drvdata->rcdev.owner =THIS_MODULE ; + drvdata->rcdev.nr_resets = max; + drvdata->rcdev.ops = &imx_blk_ctl_reset_ops; + drvdata->rcdev.of_node = dev->of_node; + drvdata->rcdev.dev = dev; + + drvdata->rst_hws =devm_kcalloc (dev, max,sizeof (struct imx_reset_hw ), +GFP_KERNEL ); + hws = drvdata->rst_hws; + +for (i =0 ; i < dev_data->hws_num; i++) { +struct imx_blk_ctl_hw *hw = &dev_data->hws[i]; + +if (hw->type !=BLK_CTL_RESET ) +continue ; + + hws[hw->id].offset = hw->offset; + hws[hw->id].shift = hw->shift; + hws[hw->id].mask = hw->mask; + } + +return devm_reset_controller_register (dev, &drvdata->rcdev); +} +static struct clk_hw *imx_blk_ctl_register_one_clock (struct device *dev, +struct imx_blk_ctl_hw *hw) +{ +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +void __iomem *base = drvdata->base; +struct clk_hw *clk_hw =NULL ; + +switch (hw->type) { +case BLK_CTL_CLK_MUX : + clk_hw =imx_dev_clk_hw_mux_flags (dev, hw->name, + base + hw->offset, + hw->shift, hw->width, + hw->parents, + hw->parents_count, + hw->flags); +break ; +case BLK_CTL_CLK_GATE : + clk_hw =imx_dev_clk_hw_gate (dev, hw->name, hw->parents, + base + hw->offset, hw->shift); +break ; +case BLK_CTL_CLK_SHARED_GATE : + clk_hw =imx_dev_clk_hw_gate_shared (dev, hw->name, + hw->parents, + base + hw->offset, + hw->shift, + hw->shared_count); +break ; +case BLK_CTL_CLK_PLL14XX : + clk_hw =imx_dev_clk_hw_pll14xx (dev, hw->name, hw->parents, + base + hw->offset, hw->pll_tbl); +break ; + }; + +return clk_hw; +} + +static int imx_blk_ctl_register_clock_controller (struct device *dev) +{ +const struct imx_blk_ctl_dev_data *dev_data =of_device_get_match_data (dev); +struct clk_hw_onecell_data *clk_hw_data; +struct clk_hw **hws; +int i; + + clk_hw_data =devm_kzalloc (dev,struct_size (clk_hw_data, hws, + dev_data->hws_num),GFP_KERNEL ); +if (WARN_ON (!clk_hw_data))
drivers/clk/imx/clk-blk-ctl.c line 225
Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10
-0+return -ENOMEM ; + + clk_hw_data->num = dev_data->clocks_max; + hws = clk_hw_data->hws; + +for (i =0 ; i < dev_data->hws_num; i++) { +struct imx_blk_ctl_hw *hw = &dev_data->hws[i]; + + hws[hw->id] =imx_blk_ctl_register_one_clock (dev, hw); +WARN (IS_ERR (hws[hw->id]),"failed to register clock %d" , hw->id);
Is this line duplicated with the following imx_check_clk_hws()?
Regards
Aisheng
Quoted 161 lines
drivers/clk/imx/clk-blk-ctl.c new file +72
-0+ } + +imx_check_clk_hws (hws, dev_data->clocks_max); + +return of_clk_add_hw_provider (dev->of_node, of_clk_hw_onecell_get, + clk_hw_data); +} + +static int imx_blk_ctl_init_runtime_pm_safekeeping (struct device *dev) +{ +const struct imx_blk_ctl_dev_data *dev_data =of_device_get_match_data (dev); +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info; +u32 regs_num = dev_data->pm_runtime_saved_regs_num; +const u32 *regs_offsets = dev_data->pm_runtime_saved_regs; + +if (!dev_data->pm_runtime_saved_regs_num) +return 0 ; + + pm_info->regs_values =devm_kzalloc (dev, +sizeof (u32) * regs_num, +GFP_KERNEL ); +if (WARN_ON (IS_ERR (pm_info->regs_values))) +return PTR_ERR (pm_info->regs_values); + + pm_info->regs_offsets =kmemdup (regs_offsets, + regs_num *sizeof (u32),GFP_KERNEL ); +if (WARN_ON (IS_ERR (pm_info->regs_offsets))) +return PTR_ERR (pm_info->regs_offsets); + + pm_info->regs_num = regs_num; + +return 0 ; +} + +int imx_blk_ctl_probe (struct platform_device *pdev) +{ +struct imx_blk_ctl_drvdata *drvdata; +struct device *dev = &pdev->dev; +int ret; + + drvdata =devm_kzalloc (dev,sizeof (*drvdata),GFP_KERNEL ); +if (WARN_ON (!drvdata)) +return -ENOMEM ; + + drvdata->base =devm_platform_ioremap_resource (pdev,0 ); +if (WARN_ON (IS_ERR (drvdata->base))) +return PTR_ERR (drvdata->base); + +dev_set_drvdata (dev, drvdata); + + ret =imx_blk_ctl_init_runtime_pm_safekeeping (dev); +if (ret) +return ret; + +pm_runtime_get_noresume (dev); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); + + ret =imx_blk_ctl_register_clock_controller (dev); +if (ret) { +pm_runtime_put (dev); +return ret; + } + + ret =imx_blk_ctl_register_reset_controller (dev); + +pm_runtime_put (dev); + +return ret; +} +EXPORT_SYMBOL_GPL (imx_blk_ctl_probe);drivers/clk/imx/clk-blk-ctl.h new file +80
-1@@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MACH_IMX_CLK_BLK_CTL_H +#define __MACH_IMX_CLK_BLK_CTL_H + +enum imx_blk_ctl_hw_type { +BLK_CTL_CLK_MUX , +BLK_CTL_CLK_GATE , +BLK_CTL_CLK_SHARED_GATE , +BLK_CTL_CLK_PLL14XX , +BLK_CTL_RESET , +}; + +struct imx_blk_ctl_hw { +int type; +char *name; +u32 offset; +u32 shift; +u32 mask; +u32 width; +u32 flags; +u32 id; +const void *parents; +u32 parents_count; +int *shared_count; +const struct imx_pll14xx_clk *pll_tbl; +}; + +struct imx_blk_ctl_dev_data { +struct imx_blk_ctl_hw *hws; +u32 hws_num; + +u32 clocks_max; +u32 resets_max; + +u32 pm_runtime_saved_regs_num; +u32 pm_runtime_saved_regs[]; +}; + +#define IMX_BLK_CTL (_type, _name, _id, _offset, _shift, _width, _mask, _parents, _parents_count, _flags, sh_count, _pll_tbl) \ + { \ + .type = _type, \ + .name = _name, \ + .id = _id, \ + .offset = _offset, \ + .shift = _shift, \ + .width = _width, \ + .mask = _mask, \ + .parents = _parents, \ + .parents_count = _parents_count, \ + .flags = _flags, \ + .shared_count = sh_count, \ + .pll_tbl = _pll_tbl, \ + } + +#define IMX_BLK_CTL_CLK_MUX (_name, _id, _offset, _shift, _width, _parents) \ + IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), 0, NULL, NULL) + +#define IMX_BLK_CTL_CLK_MUX_FLAGS (_name, _id, _offset, _shift, _width, _parents, _flags) \ + IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), _flags, NULL, NULL) + +#define IMX_BLK_CTL_CLK_GATE (_name, _id, _offset, _shift, _parents) \ + IMX_BLK_CTL(BLK_CTL_CLK_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, NULL, NULL) + +#define IMX_BLK_CTL_CLK_SHARED_GATE (_name, _id, _offset, _shift, _parents, sh_count) \ + IMX_BLK_CTL(BLK_CTL_CLK_SHARED_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, sh_count, NULL) + +#define IMX_BLK_CTL_CLK_PLL14XX (_name, _id, _offset, _parents, _pll_tbl) \ + IMX_BLK_CTL(BLK_CTL_CLK_PLL14XX, _name, _id, _offset, 0, 0, 0, _parents, 1, 0, NULL, _pll_tbl) + +#define IMX_BLK_CTL_RESET (_id, _offset, _shift) \ + IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, 1, NULL, 0, 0, NULL, NULL) + +#define IMX_BLK_CTL_RESET_MASK (_id, _offset, _shift, mask) \ + IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, mask, NULL, 0, 0, NULL, NULL) + +extern const struct dev_pm_ops imx_blk_ctl_pm_ops; + +int imx_blk_ctl_probe (struct platform_device *pdev); + +#endif --2.7.4
Re: [PATCH v3 10/14] clk: imx: Add generic blk-ctl driver
Quoted 60 lines · Dong Aisheng
Quoted 59 lines · Abel Vesa
The i.MX8MP platform introduces a new type of IP which is called
BLK_CTLin RM and usually is comprised of some GPRs that are considered too generic to be part of any dedicated IP from that specific subsystem.In general, some of the GPRs have some clock bits, some have reset bits, so in order to be able to use the imx clock API, this needs to be in a clock driver. From there it can use the reset controller API and leave the rest to the syscon.
Signed-off-by Abel Vesa <[email protected]>--- drivers/clk/imx/Makefile | 2 +- drivers/clk/imx/clk-blk-ctl.c | 297 ++++++++++++++++++++++++++++++++++++++++++ drivers/clk/imx/clk-blk-ctl.h | 80 ++++++++++++ 3 files changed, 378 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/imx/clk-blk-ctl.c create mode 100644 drivers/clk/imx/clk-blk-ctl.hdrivers/clk/imx/Makefile +1
-1@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o -obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o +obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.odrivers/clk/imx/clk-blk-ctl.c new file +21
-0@@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright 2020 NXP. +*/ + +#include <linux/clk.h> +#include <linux/reset-controller.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/types.h> + +#include "clk.h" +#include "clk-blk-ctl.h"
Quoted 9 lines
drivers/clk/imx/clk-blk-ctl.c line 27
Quoted 6 lines
drivers/clk/imx/clk-blk-ctl.c new file +6
-0+ +struct imx_reset_hw { +u32 offset; +u32 shift; +u32 mask; +volatile unsigned long asserted;Could you clarify a bit why need 'volatile' here?
Sorry for the late reply.
Tried something different before sending this version. Will drop it.
Quoted 64 lines
Quoted 64 lines
drivers/clk/imx/clk-blk-ctl.c new file +64
-0+}; + +struct imx_pm_safekeep_info { +uint32_t *regs_values; +uint32_t *regs_offsets; +uint32_t regs_num; +}; + +struct imx_blk_ctl_drvdata { +void __iomem *base; +struct reset_controller_dev rcdev; +struct imx_reset_hw *rst_hws; +struct imx_pm_safekeep_info pm_info; + +spinlock_t lock; +}; + +static void __maybe_unused imx_blk_ctl_read_write (struct device *dev, +bool write) +{ +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info; +void __iomem *base = drvdata->base; +int i; + +if (!pm_info->regs_num) +return ; + +for (i =0 ; i < pm_info->regs_num; i++) { +u32 offset = pm_info->regs_offsets[i]; + +if (write) +writel (pm_info->regs_values[i], base + offset); +else + pm_info->regs_values[i] =readl (base + offset); + } + +} + +static int __maybe_unused imx_blk_ctl_runtime_suspend (struct device *dev) +{ +imx_blk_ctl_read_write (dev, false); + +return 0 ; +} + +static int __maybe_unused imx_blk_ctl_runtime_resume (struct device *dev) +{ +imx_blk_ctl_read_write (dev, true); + +return 0 ; +} + +const struct dev_pm_ops imx_blk_ctl_pm_ops = { + SET_RUNTIME_PM_OPS(imx_blk_ctl_runtime_suspend, + imx_blk_ctl_runtime_resume, NULL) +SET_SYSTEM_SLEEP_PM_OPS (pm_runtime_force_suspend, + pm_runtime_force_resume) +}; +EXPORT_SYMBOL_GPL (imx_blk_ctl_pm_ops); + +static int imx_blk_ctl_reset_set (struct reset_controller_dev *rcdev, +unsigned long id,bool assert) +{
Quoted 8 lines
drivers/clk/imx/clk-blk-ctl.c line 99
Quoted 8 lines
drivers/clk/imx/clk-blk-ctl.c new file +8
-0+struct imx_blk_ctl_drvdata *drvdata =container_of (rcdev, + struct imx_blk_ctl_drvdata, rcdev); +unsigned int offset = drvdata->rst_hws[id].offset; +unsigned int shift = drvdata->rst_hws[id].shift; +unsigned int mask = drvdata->rst_hws[id].mask; +void __iomem *reg_addr = drvdata->base + offset; +unsigned long flags; +u32 reg;
As for the, calling deassert first issue, I was thinking maybe we can add the following here:
if (!assert && !test_bit(1, &drvdata->rst_hws[id].asserted))
return -ENODEV;What do you think ?
Quoted 9 lines
drivers/clk/imx/clk-blk-ctl.c line 103
Quoted 4 lines
drivers/clk/imx/clk-blk-ctl.c new file +4
-0+ +if (assert && !test_and_set_bit (1 , &drvdata->rst_hws[id].asserted)) +pm_runtime_get_sync (rcdev->dev); +i'm a bit confused because each reset hw has a field 'asserted' which means you're doing bit operations on each separate private variable. Is that what we want?
Yes, basically, we want to do pm_runtime_get_sync every time
there is a assert request for some specific reset bit only if
that reset bit was not asserted before. That's the purpose of the 'asserted' field.
Same goes for the pm_runtime_put but the condition is reversed.
Quoted 292 lines
BTW, what if user calling deassert first?
Will that cause writing registers without enabling power domain?Quoted 112 lines
drivers/clk/imx/clk-blk-ctl.c new file +112
-0+spin_lock_irqsave (&drvdata->lock, flags); + + reg =readl (reg_addr); +if (assert) +writel (reg & ~(mask << shift), reg_addr); +else +writel (reg | (mask << shift), reg_addr); + +spin_unlock_irqrestore (&drvdata->lock, flags); + +if (!assert &&test_and_clear_bit (1 , &drvdata->rst_hws[id].asserted)) +pm_runtime_put (rcdev->dev); + +return 0 ; +} + +static int imx_blk_ctl_reset_assert (struct reset_controller_dev *rcdev, +unsigned long id) +{ +return imx_blk_ctl_reset_set (rcdev, id, true); +} + +static int imx_blk_ctl_reset_deassert (struct reset_controller_dev *rcdev, +unsigned long id) +{ +return imx_blk_ctl_reset_set (rcdev, id, false); +} + +static const struct reset_control_ops imx_blk_ctl_reset_ops = { + .assert = imx_blk_ctl_reset_assert, + .deassert = imx_blk_ctl_reset_deassert, +}; + +static int imx_blk_ctl_register_reset_controller (struct device *dev) +{ +const struct imx_blk_ctl_dev_data *dev_data =of_device_get_match_data (dev); +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +int max = dev_data->resets_max; +struct imx_reset_hw *hws; +int i; + +spin_lock_init (&drvdata->lock); + + drvdata->rcdev.owner =THIS_MODULE ; + drvdata->rcdev.nr_resets = max; + drvdata->rcdev.ops = &imx_blk_ctl_reset_ops; + drvdata->rcdev.of_node = dev->of_node; + drvdata->rcdev.dev = dev; + + drvdata->rst_hws =devm_kcalloc (dev, max,sizeof (struct imx_reset_hw ), +GFP_KERNEL ); + hws = drvdata->rst_hws; + +for (i =0 ; i < dev_data->hws_num; i++) { +struct imx_blk_ctl_hw *hw = &dev_data->hws[i]; + +if (hw->type !=BLK_CTL_RESET ) +continue ; + + hws[hw->id].offset = hw->offset; + hws[hw->id].shift = hw->shift; + hws[hw->id].mask = hw->mask; + } + +return devm_reset_controller_register (dev, &drvdata->rcdev); +} +static struct clk_hw *imx_blk_ctl_register_one_clock (struct device *dev, +struct imx_blk_ctl_hw *hw) +{ +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +void __iomem *base = drvdata->base; +struct clk_hw *clk_hw =NULL ; + +switch (hw->type) { +case BLK_CTL_CLK_MUX : + clk_hw =imx_dev_clk_hw_mux_flags (dev, hw->name, + base + hw->offset, + hw->shift, hw->width, + hw->parents, + hw->parents_count, + hw->flags); +break ; +case BLK_CTL_CLK_GATE : + clk_hw =imx_dev_clk_hw_gate (dev, hw->name, hw->parents, + base + hw->offset, hw->shift); +break ; +case BLK_CTL_CLK_SHARED_GATE : + clk_hw =imx_dev_clk_hw_gate_shared (dev, hw->name, + hw->parents, + base + hw->offset, + hw->shift, + hw->shared_count); +break ; +case BLK_CTL_CLK_PLL14XX : + clk_hw =imx_dev_clk_hw_pll14xx (dev, hw->name, hw->parents, + base + hw->offset, hw->pll_tbl); +break ; + }; + +return clk_hw; +} + +static int imx_blk_ctl_register_clock_controller (struct device *dev) +{ +const struct imx_blk_ctl_dev_data *dev_data =of_device_get_match_data (dev); +struct clk_hw_onecell_data *clk_hw_data; +struct clk_hw **hws; +int i; + + clk_hw_data =devm_kzalloc (dev,struct_size (clk_hw_data, hws, + dev_data->hws_num),GFP_KERNEL ); +if (WARN_ON (!clk_hw_data))drivers/clk/imx/clk-blk-ctl.c line 225
Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10
-0+return -ENOMEM ; + + clk_hw_data->num = dev_data->clocks_max; + hws = clk_hw_data->hws; + +for (i =0 ; i < dev_data->hws_num; i++) { +struct imx_blk_ctl_hw *hw = &dev_data->hws[i]; + + hws[hw->id] =imx_blk_ctl_register_one_clock (dev, hw); +WARN (IS_ERR (hws[hw->id]),"failed to register clock %d" , hw->id);Is this line duplicated with the following
imx_check_clk_hws()?Regards
AishengQuoted 161 lines
drivers/clk/imx/clk-blk-ctl.c new file +72
-0+ } + +imx_check_clk_hws (hws, dev_data->clocks_max); + +return of_clk_add_hw_provider (dev->of_node, of_clk_hw_onecell_get, + clk_hw_data); +} + +static int imx_blk_ctl_init_runtime_pm_safekeeping (struct device *dev) +{ +const struct imx_blk_ctl_dev_data *dev_data =of_device_get_match_data (dev); +struct imx_blk_ctl_drvdata *drvdata =dev_get_drvdata (dev); +struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info; +u32 regs_num = dev_data->pm_runtime_saved_regs_num; +const u32 *regs_offsets = dev_data->pm_runtime_saved_regs; + +if (!dev_data->pm_runtime_saved_regs_num) +return 0 ; + + pm_info->regs_values =devm_kzalloc (dev, +sizeof (u32) * regs_num, +GFP_KERNEL ); +if (WARN_ON (IS_ERR (pm_info->regs_values))) +return PTR_ERR (pm_info->regs_values); + + pm_info->regs_offsets =kmemdup (regs_offsets, + regs_num *sizeof (u32),GFP_KERNEL ); +if (WARN_ON (IS_ERR (pm_info->regs_offsets))) +return PTR_ERR (pm_info->regs_offsets); + + pm_info->regs_num = regs_num; + +return 0 ; +} + +int imx_blk_ctl_probe (struct platform_device *pdev) +{ +struct imx_blk_ctl_drvdata *drvdata; +struct device *dev = &pdev->dev; +int ret; + + drvdata =devm_kzalloc (dev,sizeof (*drvdata),GFP_KERNEL ); +if (WARN_ON (!drvdata)) +return -ENOMEM ; + + drvdata->base =devm_platform_ioremap_resource (pdev,0 ); +if (WARN_ON (IS_ERR (drvdata->base))) +return PTR_ERR (drvdata->base); + +dev_set_drvdata (dev, drvdata); + + ret =imx_blk_ctl_init_runtime_pm_safekeeping (dev); +if (ret) +return ret; + +pm_runtime_get_noresume (dev); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); + + ret =imx_blk_ctl_register_clock_controller (dev); +if (ret) { +pm_runtime_put (dev); +return ret; + } + + ret =imx_blk_ctl_register_reset_controller (dev); + +pm_runtime_put (dev); + +return ret; +} +EXPORT_SYMBOL_GPL (imx_blk_ctl_probe);drivers/clk/imx/clk-blk-ctl.h new file +80
-1@@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MACH_IMX_CLK_BLK_CTL_H +#define __MACH_IMX_CLK_BLK_CTL_H + +enum imx_blk_ctl_hw_type { +BLK_CTL_CLK_MUX , +BLK_CTL_CLK_GATE , +BLK_CTL_CLK_SHARED_GATE , +BLK_CTL_CLK_PLL14XX , +BLK_CTL_RESET , +}; + +struct imx_blk_ctl_hw { +int type; +char *name; +u32 offset; +u32 shift; +u32 mask; +u32 width; +u32 flags; +u32 id; +const void *parents; +u32 parents_count; +int *shared_count; +const struct imx_pll14xx_clk *pll_tbl; +}; + +struct imx_blk_ctl_dev_data { +struct imx_blk_ctl_hw *hws; +u32 hws_num; + +u32 clocks_max; +u32 resets_max; + +u32 pm_runtime_saved_regs_num; +u32 pm_runtime_saved_regs[]; +}; + +#define IMX_BLK_CTL (_type, _name, _id, _offset, _shift, _width, _mask, _parents, _parents_count, _flags, sh_count, _pll_tbl) \ + { \ + .type = _type, \ + .name = _name, \ + .id = _id, \ + .offset = _offset, \ + .shift = _shift, \ + .width = _width, \ + .mask = _mask, \ + .parents = _parents, \ + .parents_count = _parents_count, \ + .flags = _flags, \ + .shared_count = sh_count, \ + .pll_tbl = _pll_tbl, \ + } + +#define IMX_BLK_CTL_CLK_MUX (_name, _id, _offset, _shift, _width, _parents) \ + IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), 0, NULL, NULL) + +#define IMX_BLK_CTL_CLK_MUX_FLAGS (_name, _id, _offset, _shift, _width, _parents, _flags) \ + IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), _flags, NULL, NULL) + +#define IMX_BLK_CTL_CLK_GATE (_name, _id, _offset, _shift, _parents) \ + IMX_BLK_CTL(BLK_CTL_CLK_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, NULL, NULL) + +#define IMX_BLK_CTL_CLK_SHARED_GATE (_name, _id, _offset, _shift, _parents, sh_count) \ + IMX_BLK_CTL(BLK_CTL_CLK_SHARED_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, sh_count, NULL) + +#define IMX_BLK_CTL_CLK_PLL14XX (_name, _id, _offset, _parents, _pll_tbl) \ + IMX_BLK_CTL(BLK_CTL_CLK_PLL14XX, _name, _id, _offset, 0, 0, 0, _parents, 1, 0, NULL, _pll_tbl) + +#define IMX_BLK_CTL_RESET (_id, _offset, _shift) \ + IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, 1, NULL, 0, 0, NULL, NULL) + +#define IMX_BLK_CTL_RESET_MASK (_id, _offset, _shift, mask) \ + IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, mask, NULL, 0, 0, NULL, NULL) + +extern const struct dev_pm_ops imx_blk_ctl_pm_ops; + +int imx_blk_ctl_probe (struct platform_device *pdev); + +#endif --2.7.4
PATCH v3 11/14 clk: imx: Add blk-ctl driver for i.MX8MP
In reply to Abel VesaThis driver is intended to work with the following BLK_CTL IPs found in i.MX8MP:
- Audio
- Media
- HDMI
--- drivers/clk/imx/Makefile | 2 +- drivers/clk/imx/clk-blk-ctl-imx8mp.c | 313 +++++++++++++++++++++++++++++++++++ 2 files changed, 314 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/imx/clk-blk-ctl-imx8mp.c
drivers/clk/imx/Makefile +1 -1
@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o -obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o +obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o clk-blk-ctl-imx8mp.o obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o
drivers/clk/imx/clk-blk-ctl-imx8mp.c new file +313 -0
313 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 12/14 arm64: dts: imx8mp: Add audio_blk_ctl node
In reply to Abel VesaSome of the features of the audio_ctl will be used by some different drivers in a way those drivers will know best, so adding the syscon compatible we allow those to do just that. Only the resets and the clocks are registered bit the clk-blk-ctl driver.
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +15 -0
@@ -736,6 +736,21 @@ }; }; + aips5: bus@30c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + audio_blk_ctl: clock-controller@30e20000 { + compatible = "fsl,imx8mp-audio-blk-ctl", "syscon"; + reg = <0x30e20000 0x50c>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>,
Signature · 1 line
2.7.4
PATCH v3 13/14 arm64: dts: imx8mp: Add media_blk_ctl node
In reply to Abel VesaSome of the features of the media_ctl will be used by some different drivers in a way those drivers will know best, so adding the syscon compatible we allow those to do just that. Only the resets and the clocks are registered bit the clk-blk-ctl driver.
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +15 -0
@@ -736,6 +736,21 @@ }; }; + aips4: bus@32c00000 { + compatible = "simple-bus"; + reg = <0x32c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + media_blk_ctl: clock-controller@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctl", "syscon"; + reg = <0x32ec0000 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + aips5: bus@30c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30c00000 0x400000>;
Signature · 1 line
2.7.4
PATCH v3 14/14 arm64: dts: imx8mp: Add hdmi_blk_ctl node
In reply to Abel VesaSome of the features of the hdmi_ctl will be used by some different drivers in a way those drivers will know best, so adding the syscon compatible we allow those to do just that. Only the resets and the clocks are registered bit the clk-blk-ctl driver.
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +7 -0
@@ -749,6 +749,13 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + hdmi_blk_ctl: clock-controller@32fc0000 { + compatible = "fsl,imx8mp-hdmi-blk-ctl", "syscon"; + reg = <0x32fc0000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; aips5: bus@30c00000 {
Signature · 1 line
2.7.4