Skip to contentSkip to conversation

Add BLK_CTL support for i.MX8MP

PATCH Superseded Abel Vesa 4 participants 20 messages Sep 8, 2020 – Sep 30, 2020

Subsystems (5)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Abel Vesa

author
#0 lore raw

v3 cover Add BLK_CTL support for i.MX8MP

The BLK_CTL according to HW design is basically the wrapper of the entire function specific group of IPs and holds GPRs that usually cannot be placed into one specific IP from that group. Some of these GPRs are used to control some clocks, other some resets, others some very specific function that does not fit into clocks or resets. Since the clocks are registered using the i.MX clock subsystem API, the driver is placed into the clock subsystem, but it also registers the resets. For the other functionalities that other GPRs might have, the syscon is used.

Changes since v2:
* Made the naming consistent with the RM: BLK_CTL (not BLK_CTRL)
* fixed the reset set procedure as discussed with Philipp Zabel
* removed the patch that includes the imx8mp-reset header in dtsi as there is no user yet.
* added i.MX8MP specific blk_ctl driver as suggested by Aisheng Dong

Abel Vesa (14):
dt-bindings: clocks: imx8mp: Rename audiomix ids clocks to
audio_blk_ctl
dt-bindings: reset: imx8mp: Add audio blk_ctl reset IDs
dt-bindings: clock: imx8mp: Add ids for the audio shared gate
dt-bindings: clock: imx8mp: Add media blk_ctl clock IDs
dt-bindings: reset: imx8mp: Add media blk_ctl reset IDs
dt-bindings: clock: imx8mp: Add hdmi blk_ctl clock IDs
dt-bindings: reset: imx8mp: Add hdmi blk_ctl reset IDs
clk: imx8mp: Add audio shared gate
Documentation: bindings: clk: Add bindings for i.MX BLK_CTL
clk: imx: Add generic blk-ctl driver
clk: imx: Add blk-ctl driver for i.MX8MP
arm64: dts: imx8mp: Add audio_blk_ctl node
arm64: dts: imx8mp: Add media_blk_ctl node
arm64: dts: imx8mp: Add hdmi_blk_ctl node

 .../devicetree/bindings/clock/fsl,imx-blk-ctl.yaml |  60 ++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          |  37 +++
 drivers/clk/imx/Makefile                           |   2 +-
 drivers/clk/imx/clk-blk-ctl-imx8mp.c               | 313 +++++++++++++++++++++
 drivers/clk/imx/clk-blk-ctl.c                      | 297 +++++++++++++++++++
 drivers/clk/imx/clk-blk-ctl.h                      |  80 ++++++
 drivers/clk/imx/clk-imx8mp.c                       |  12 +-
 include/dt-bindings/clock/imx8mp-clock.h           | 200 +++++++++----
 include/dt-bindings/reset/imx8mp-reset.h           |  45 +++
 9 files changed, 983 insertions(+), 63 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml
 create mode 100644 drivers/clk/imx/clk-blk-ctl-imx8mp.c
 create mode 100644 drivers/clk/imx/clk-blk-ctl.c
 create mode 100644 drivers/clk/imx/clk-blk-ctl.h
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v3 1/14 dt-bindings: clocks: imx8mp: Rename audiomix ids clocks to audio_blk_ctl

In the reference manual the actual name is Audio BLK_CTL.
Lets make it more obvious here by renaming from audiomix to audio_blk_ctl.

---
 include/dt-bindings/clock/imx8mp-clock.h | 120 +++++++++++++++----------------
 1 file changed, 60 insertions(+), 60 deletions(-)
include/dt-bindings/clock/imx8mp-clock.h +60 -60
index e8d68fb..89c67b7 100644
@@ -324,66 +324,66 @@
 
 #define IMX8MP_CLK_END				313
 
-#define IMX8MP_CLK_AUDIOMIX_SAI1_IPG		0
-#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1		1
-#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2		2
-#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3		3
-#define IMX8MP_CLK_AUDIOMIX_SAI2_IPG		4
-#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1		5
-#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2		6
-#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3		7
-#define IMX8MP_CLK_AUDIOMIX_SAI3_IPG		8
-#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1		9
-#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2		10
-#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3		11
-#define IMX8MP_CLK_AUDIOMIX_SAI5_IPG		12
-#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1		13
-#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2		14
-#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3		15
-#define IMX8MP_CLK_AUDIOMIX_SAI6_IPG		16
-#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1		17
-#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2		18
-#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3		19
-#define IMX8MP_CLK_AUDIOMIX_SAI7_IPG		20
-#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1		21
-#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2		22
-#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3		23
-#define IMX8MP_CLK_AUDIOMIX_ASRC_IPG		24
-#define IMX8MP_CLK_AUDIOMIX_PDM_IPG		25
-#define IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT		26
-#define IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT		27
-#define IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT		28
-#define IMX8MP_CLK_AUDIOMIX_DSP_ROOT		29
-#define IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT		30
-#define IMX8MP_CLK_AUDIOMIX_EARC_IPG		31
-#define IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG		32
-#define IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG		33
-#define IMX8MP_CLK_AUDIOMIX_EDMA_ROOT		34
-#define IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT		35
-#define IMX8MP_CLK_AUDIOMIX_MU2_ROOT		36
-#define IMX8MP_CLK_AUDIOMIX_MU3_ROOT		37
-#define IMX8MP_CLK_AUDIOMIX_EARC_PHY		38
-#define IMX8MP_CLK_AUDIOMIX_PDM_ROOT		39
-#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1_SEL	40
-#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2_SEL	41
-#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1_SEL	42
-#define IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2_SEL	43
-#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1_SEL	44
-#define IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2_SEL	45
-#define IMX8MP_CLK_AUDIOMIX_SAI4_MCLK1_SEL	46
-#define IMX8MP_CLK_AUDIOMIX_SAI4_MCLK2_SEL	47
-#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1_SEL	48
-#define IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2_SEL	49
-#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1_SEL	50
-#define IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2_SEL	51
-#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1_SEL	52
-#define IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2_SEL	53
-#define IMX8MP_CLK_AUDIOMIX_PDM_SEL		54
-#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_REF_SEL	55
-#define IMX8MP_CLK_AUDIOMIX_SAI_PLL		56
-#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_BYPASS	57
-#define IMX8MP_CLK_AUDIOMIX_SAI_PLL_OUT		58
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_IPG		0
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1		1
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK2		2
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK3		3
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_IPG		4
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK1		5
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK2		6
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK3		7
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_IPG		8
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK1		9
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK2		10
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK3		11
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_IPG		12
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK1		13
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK2		14
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK3		15
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_IPG		16
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK1		17
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK2		18
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK3		19
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_IPG		20
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK1		21
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK2		22
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK3		23
+#define IMX8MP_CLK_AUDIO_BLK_CTL_ASRC_IPG		24
+#define IMX8MP_CLK_AUDIO_BLK_CTL_PDM_IPG		25
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SDMA2_ROOT		26
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SDMA3_ROOT		27
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SPBA2_ROOT		28
+#define IMX8MP_CLK_AUDIO_BLK_CTL_DSP_ROOT		29
+#define IMX8MP_CLK_AUDIO_BLK_CTL_DSPDBG_ROOT		30
+#define IMX8MP_CLK_AUDIO_BLK_CTL_EARC_IPG		31
+#define IMX8MP_CLK_AUDIO_BLK_CTL_OCRAMA_IPG		32
+#define IMX8MP_CLK_AUDIO_BLK_CTL_AUD2HTX_IPG		33
+#define IMX8MP_CLK_AUDIO_BLK_CTL_EDMA_ROOT		34
+#define IMX8MP_CLK_AUDIO_BLK_CTL_AUDPLL_ROOT		35
+#define IMX8MP_CLK_AUDIO_BLK_CTL_MU2_ROOT		36
+#define IMX8MP_CLK_AUDIO_BLK_CTL_MU3_ROOT		37
+#define IMX8MP_CLK_AUDIO_BLK_CTL_EARC_PHY		38
+#define IMX8MP_CLK_AUDIO_BLK_CTL_PDM_ROOT		39
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1_SEL	40
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK2_SEL	41
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK1_SEL	42
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI2_MCLK2_SEL	43
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK1_SEL	44
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI3_MCLK2_SEL	45
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI4_MCLK1_SEL	46
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI4_MCLK2_SEL	47
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK1_SEL	48
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI5_MCLK2_SEL	49
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK1_SEL	50
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI6_MCLK2_SEL	51
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK1_SEL	52
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI7_MCLK2_SEL	53
+#define IMX8MP_CLK_AUDIO_BLK_CTL_PDM_SEL		54
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL_REF_SEL	55
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL		56
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL_BYPASS	57
+#define IMX8MP_CLK_AUDIO_BLK_CTL_SAI_PLL_OUT		58
 
-#define IMX8MP_CLK_AUDIOMIX_END			59
+#define IMX8MP_CLK_AUDIO_BLK_CTL_END			59
 
 #endif
Signature · 1 line
2.7.4
author
#2 lore raw

PATCH v3 2/14 dt-bindings: reset: imx8mp: Add audio blk_ctl reset IDs

In reply to Abel Vesa

These will be used by the imx8mp for blk_ctl driver.

---
 include/dt-bindings/reset/imx8mp-reset.h | 5 +++++
 1 file changed, 5 insertions(+)
include/dt-bindings/reset/imx8mp-reset.h +5 -0
index 2e8c910..6c7f17f 100644
@@ -47,4 +47,9 @@
 
 #define IMX8MP_RESET_NUM			38
 
+#define IMX8MP_AUDIO_BLK_CTL_EARC_RESET		0
+#define IMX8MP_AUDIO_BLK_CTL_EARC_PHY_RESET	1
+
+#define IMX8MP_AUDIO_BLK_CTL_RESET_NUM		2
+
 #endif
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH v3 3/14 dt-bindings: clock: imx8mp: Add ids for the audio shared gate

In reply to Abel Vesa

All these IDs are for one single HW gate (CCGR101) that is shared between these root clocks.

---
 include/dt-bindings/clock/imx8mp-clock.h | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
include/dt-bindings/clock/imx8mp-clock.h +11 -1
index 89c67b7..5fc2c40 100644
@@ -322,7 +322,17 @@
 #define IMX8MP_CLK_HSIO_AXI			311
 #define IMX8MP_CLK_MEDIA_ISP			312
 
-#define IMX8MP_CLK_END				313
+#define IMX8MP_CLK_AUDIO_AHB_ROOT		313
+#define IMX8MP_CLK_AUDIO_AXI_ROOT		314
+#define IMX8MP_CLK_SAI1_ROOT			315
+#define IMX8MP_CLK_SAI2_ROOT			316
+#define IMX8MP_CLK_SAI3_ROOT			317
+#define IMX8MP_CLK_SAI5_ROOT			318
+#define IMX8MP_CLK_SAI6_ROOT			319
+#define IMX8MP_CLK_SAI7_ROOT			320
+#define IMX8MP_CLK_PDM_ROOT			321
+
+#define IMX8MP_CLK_END				322
 
 #define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_IPG		0
 #define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1		1
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Reviewed-by on v3 3/14
#4 lore raw

RE: [PATCH v3 03/14] dt-bindings: clock: imx8mp: Add ids for the audio shared gate

Quoted 8 lines

From: Abel Vesa <[email protected]>
Sent: Tuesday, September 8, 2020 6:25 PM

All these IDs are for one single HW gate (CCGR101) that is shared between these root clocks.

Seems missed my tag.
So:

Regards
Aisheng

Quoted 30 lines
---
 include/dt-bindings/clock/imx8mp-clock.h | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
include/dt-bindings/clock/imx8mp-clock.h +11 -2
index 89c67b7..5fc2c40 100644
@@ -322,7 +322,17 @@
 #define IMX8MP_CLK_HSIO_AXI			311
 #define IMX8MP_CLK_MEDIA_ISP			312
 
-#define IMX8MP_CLK_END				313
+#define IMX8MP_CLK_AUDIO_AHB_ROOT		313
+#define IMX8MP_CLK_AUDIO_AXI_ROOT		314
+#define IMX8MP_CLK_SAI1_ROOT			315
+#define IMX8MP_CLK_SAI2_ROOT			316
+#define IMX8MP_CLK_SAI3_ROOT			317
+#define IMX8MP_CLK_SAI5_ROOT			318
+#define IMX8MP_CLK_SAI6_ROOT			319
+#define IMX8MP_CLK_SAI7_ROOT			320
+#define IMX8MP_CLK_PDM_ROOT			321
+
+#define IMX8MP_CLK_END				322
 
 #define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_IPG		0
 #define IMX8MP_CLK_AUDIO_BLK_CTL_SAI1_MCLK1		1
--

2.7.4

author
#5 lore raw

PATCH v3 4/14 dt-bindings: clock: imx8mp: Add media blk_ctl clock IDs

In reply to Abel Vesa

These will be used by the imx8mp for blk_ctl driver.

---
 include/dt-bindings/clock/imx8mp-clock.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
include/dt-bindings/clock/imx8mp-clock.h +28 -0
index 5fc2c40..12632fa 100644
@@ -396,4 +396,32 @@
 
 #define IMX8MP_CLK_AUDIO_BLK_CTL_END			59
 
+#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_DSI_PCLK		0
+#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_DSI_CLKREF	1
+#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI_PCLK		2
+#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI_ACLK		3
+#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF_PIXEL		4
+#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF_APB		5
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISI_PROC		6
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISI_APB		7
+#define IMX8MP_CLK_MEDIA_BLK_CTL_BUS_BLK		8
+#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI2_PCLK		9
+#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_CSI2_ACLK		10
+#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF2_PIXEL		11
+#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF2_APB		12
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP1_COR		13
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP1_AXI		14
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP1_AHB		15
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP0_COR		16
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP0_AXI		17
+#define IMX8MP_CLK_MEDIA_BLK_CTL_ISP0_AHB		18
+#define IMX8MP_CLK_MEDIA_BLK_CTL_DWE_COR		19
+#define IMX8MP_CLK_MEDIA_BLK_CTL_DWE_AXI		20
+#define IMX8MP_CLK_MEDIA_BLK_CTL_DWE_AHB		21
+#define IMX8MP_CLK_MEDIA_BLK_CTL_MIPI_DSI2		22
+#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF_AXI		23
+#define IMX8MP_CLK_MEDIA_BLK_CTL_LCDIF2_AXI		24
+
+#define IMX8MP_CLK_MEDIA_BLK_CTL_END			25
+
 #endif
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#6 lore raw

PATCH v3 5/14 dt-bindings: reset: imx8mp: Add media blk_ctl reset IDs

In reply to Abel Vesa

These will be used by the imx8mp for blk_ctl driver.

---
 include/dt-bindings/reset/imx8mp-reset.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
include/dt-bindings/reset/imx8mp-reset.h +28 -0
index 6c7f17f..ba70248 100644
@@ -52,4 +52,32 @@
 
 #define IMX8MP_AUDIO_BLK_CTL_RESET_NUM		2
 
+#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_DSI_PCLK	0
+#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_DSI_CLKREF	1
+#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI_PCLK	2
+#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI_ACLK	3
+#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF_PIXEL		4
+#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF_APB		5
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISI_PROC		6
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISI_APB		7
+#define IMX8MP_MEDIA_BLK_CTL_RESET_BUS_BLK		8
+#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI2_PCLK	9
+#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_CSI2_ACLK	10
+#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF2_PIXEL		11
+#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF2_APB		12
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP1_COR		13
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP1_AXI		14
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP1_AHB		15
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP0_COR		16
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP0_AXI		17
+#define IMX8MP_MEDIA_BLK_CTL_RESET_ISP0_AHB		18
+#define IMX8MP_MEDIA_BLK_CTL_RESET_DWE_COR		19
+#define IMX8MP_MEDIA_BLK_CTL_RESET_DWE_AXI		20
+#define IMX8MP_MEDIA_BLK_CTL_RESET_DWE_AHB		21
+#define IMX8MP_MEDIA_BLK_CTL_RESET_MIPI_DSI2		22
+#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF_AXI		23
+#define IMX8MP_MEDIA_BLK_CTL_RESET_LCDIF2_AXI		24
+
+#define IMX8MP_MEDIA_BLK_CTL_RESET_NUM			25
+
 #endif
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#7 lore raw

PATCH v3 6/14 dt-bindings: clock: imx8mp: Add hdmi blk_ctl clock IDs

In reply to Abel Vesa

These will be used by the imx8mp for blk_ctl driver.

---
 include/dt-bindings/clock/imx8mp-clock.h | 40 ++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
include/dt-bindings/clock/imx8mp-clock.h +40 -0
index 12632fa..de7d522 100644
@@ -424,4 +424,44 @@
 
 #define IMX8MP_CLK_MEDIA_BLK_CTL_END			25
 
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_APB_CLK		0
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_B_CLK		1
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_REF266M_CLK	2
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL24M_CLK	3
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL32K_CLK	4
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_TX_PIX_CLK	5
+#define IMX8MP_CLK_HDMI_BLK_CTL_IRQS_STEER_CLK		6
+#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDMI_CLK		7
+#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDCP_CLK		8
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_APB_CLK		9
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_B_CLK		10
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PDI_CLK		11
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PIX_CLK		12
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_SPU_CLK		13
+#define IMX8MP_CLK_HDMI_BLK_CTL_FDCC_REF_CLK		14
+#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_APB_CLK		15
+#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_B_CLK		16
+#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_CEA_CLK		17
+#define IMX8MP_CLK_HDMI_BLK_CTL_VSFD_CEA_CLK		18
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_HPI_CLK		19
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_APB_CLK		20
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_CEC_CLK		21
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_ESM_CLK		22
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_GPA_CLK		23
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIXEL_CLK		24
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SFR_CLK		25
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SKP_CLK		26
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PREP_CLK		27
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_APB_CLK		28
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_INT_CLK		29
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SEC_MEM_CLK		30
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_SKP_CLK		31
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_VID_LINK_PIX_CLK	32
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_APB_CLK		33
+#define IMX8MP_CLK_HDMI_BLK_CTL_HTXPHY_CLK_SEL		34
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_CLK_SEL		35
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIPE_CLK_SEL		36
+
+#define IMX8MP_CLK_HDMI_BLK_CTL_END			37
+
 #endif
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Reviewed-by on v3 6/14
#8 lore raw

RE: [PATCH v3 06/14] dt-bindings: clock: imx8mp: Add hdmi blk_ctl clock IDs

Quoted 7 lines

From: Abel Vesa <[email protected]>
Sent: Tuesday, September 8, 2020 6:25 PM

These will be used by the imx8mp for blk_ctl driver.

Regards
Aisheng

Quoted 57 lines
---
 include/dt-bindings/clock/imx8mp-clock.h | 40
++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
include/dt-bindings/clock/imx8mp-clock.h +40 -1
index 12632fa..de7d522 100644
@@ -424,4 +424,44 @@
 
 #define IMX8MP_CLK_MEDIA_BLK_CTL_END			25
 
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_APB_CLK		0
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_B_CLK		1
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_REF266M_CLK	2
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL24M_CLK	3
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_XTAL32K_CLK	4
+#define IMX8MP_CLK_HDMI_BLK_CTL_GLOBAL_TX_PIX_CLK	5
+#define IMX8MP_CLK_HDMI_BLK_CTL_IRQS_STEER_CLK		6
+#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDMI_CLK		7
+#define IMX8MP_CLK_HDMI_BLK_CTL_NOC_HDCP_CLK		8
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_APB_CLK		9
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_B_CLK		10
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PDI_CLK		11
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_PIX_CLK		12
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_SPU_CLK		13
+#define IMX8MP_CLK_HDMI_BLK_CTL_FDCC_REF_CLK		14
+#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_APB_CLK		15
+#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_B_CLK		16
+#define IMX8MP_CLK_HDMI_BLK_CTL_HRV_MWR_CEA_CLK		17
+#define IMX8MP_CLK_HDMI_BLK_CTL_VSFD_CEA_CLK		18
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_HPI_CLK		19
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_APB_CLK		20
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_CEC_CLK		21
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_ESM_CLK		22
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_GPA_CLK		23
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIXEL_CLK		24
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SFR_CLK		25
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SKP_CLK		26
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PREP_CLK		27
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_APB_CLK		28
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PHY_INT_CLK		29
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_SEC_MEM_CLK		30
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_SKP_CLK		31
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_VID_LINK_PIX_CLK	32
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_TRNG_APB_CLK		33
+#define IMX8MP_CLK_HDMI_BLK_CTL_HTXPHY_CLK_SEL		34
+#define IMX8MP_CLK_HDMI_BLK_CTL_LCDIF_CLK_SEL		35
+#define IMX8MP_CLK_HDMI_BLK_CTL_TX_PIPE_CLK_SEL		36
+
+#define IMX8MP_CLK_HDMI_BLK_CTL_END			37
+
 #endif
--

2.7.4

author
#9 lore raw

PATCH v3 7/14 dt-bindings: reset: imx8mp: Add hdmi blk_ctl reset IDs

In reply to Abel Vesa

These will be used imx8mp for blk_ctl driver.

---
 include/dt-bindings/reset/imx8mp-reset.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)
include/dt-bindings/reset/imx8mp-reset.h +12 -0
index ba70248..eb9ed21 100644
@@ -80,4 +80,16 @@
 
 #define IMX8MP_MEDIA_BLK_CTL_RESET_NUM			25
 
+#define IMX8MP_HDMI_BLK_CTL_HDMI_TX_RESET		0
+#define IMX8MP_HDMI_BLK_CTL_HDMI_PHY_RESET		1
+#define IMX8MP_HDMI_BLK_CTL_HDMI_PAI_RESET		2
+#define IMX8MP_HDMI_BLK_CTL_HDMI_PVI_RESET		3
+#define IMX8MP_HDMI_BLK_CTL_HDMI_TRNG_RESET		4
+#define IMX8MP_HDMI_BLK_CTL_IRQ_STEER_RESET		5
+#define IMX8MP_HDMI_BLK_CTL_HDMI_HDCP_RESET		6
+#define IMX8MP_HDMI_BLK_CTL_LCDIF_RESET			7
+
+#define IMX8MP_HDMI_BLK_CTL_RESET_NUM			8
+
+
 #endif
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#10 lore raw

PATCH v3 8/14 clk: imx8mp: Add audio shared gate

In reply to Abel Vesa

According to the RM, the CCGR101 is shared for the following root clocks:
- AUDIO_AHB_CLK_ROOT
- AUDIO_AXI_CLK_ROOT
- SAI2_CLK_ROOT
- SAI3_CLK_ROOT
- SAI5_CLK_ROOT
- SAI6_CLK_ROOT
- SAI7_CLK_ROOT
- PDM_CLK_ROOT

---
 drivers/clk/imx/clk-imx8mp.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/clk/imx/clk-imx8mp.c +11 -1
index 12ce477..6812a01 100644
@@ -17,6 +17,7 @@
 
 static u32 share_count_nand;
 static u32 share_count_media;
+static u32 share_count_audio;
 
 static const char * const pll_ref_sels[] = { "osc_24m", "dummy", "dummy", "dummy", };
 static const char * const audio_pll1_bypass_sels[] = {"audio_pll1", "audio_pll1_ref_sel", };
@@ -725,7 +726,16 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_HDMI_ROOT] = imx_clk_hw_gate4("hdmi_root_clk", "hdmi_axi", ccm_base + 0x45f0, 0);
 	hws[IMX8MP_CLK_TSENSOR_ROOT] = imx_clk_hw_gate4("tsensor_root_clk", "ipg_root", ccm_base + 0x4620, 0);
 	hws[IMX8MP_CLK_VPU_ROOT] = imx_clk_hw_gate4("vpu_root_clk", "vpu_bus", ccm_base + 0x4630, 0);
-	hws[IMX8MP_CLK_AUDIO_ROOT] = imx_clk_hw_gate4("audio_root_clk", "ipg_root", ccm_base + 0x4650, 0);
+
+	hws[IMX8MP_CLK_AUDIO_AHB_ROOT] = imx_clk_hw_gate2_shared2("audio_ahb_root", "audio_ahb", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_AUDIO_AXI_ROOT] = imx_clk_hw_gate2_shared2("audio_axi_root", "audio_axi", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_SAI1_ROOT] = imx_clk_hw_gate2_shared2("sai1_root", "sai1", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_SAI2_ROOT] = imx_clk_hw_gate2_shared2("sai2_root", "sai2", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_SAI3_ROOT] = imx_clk_hw_gate2_shared2("sai3_root", "sai3", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_SAI5_ROOT] = imx_clk_hw_gate2_shared2("sai5_root", "sai5", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_SAI6_ROOT] = imx_clk_hw_gate2_shared2("sai6_root", "sai6", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_SAI7_ROOT] = imx_clk_hw_gate2_shared2("sai7_root", "sai7", ccm_base + 0x4650, 0, &share_count_audio);
+	hws[IMX8MP_CLK_PDM_ROOT] = imx_clk_hw_gate2_shared2("pdm_root", "pdm", ccm_base + 0x4650, 0, &share_count_audio);
 
 	hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
 					     hws[IMX8MP_CLK_A53_CORE]->clk,
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#11 lore raw

PATCH v3 9/14 Documentation: bindings: clk: Add bindings for i.MX BLK_CTL

In reply to Abel Vesa

Document the i.MX BLK_CTL with its devicetree properties.

---
 .../devicetree/bindings/clock/fsl,imx-blk-ctl.yaml | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml
Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml new file +60 -0
new file mode 100644
index 00000000..5e9eb40
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx-blk-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX BLK_CTL
+
+maintainers:
+  - Abel Vesa <[email protected]>
+
+description:
+  i.MX BLK_CTL is a conglomerate of different GPRs that are
+  dedicated to a specific subsystem. Because it usually contains
+  clocks amongst other things, it needs access to the i.MX clocks
+  API. All the other functionalities it provides can work just fine
+  from the clock subsystem tree.
+
+properties:
+  compatible:
+    items:
+      - enum:
+         - fsl,imx8mp-audio-blk-ctl
+         - fsl,imx8mp-hdmi-blk-ctl
+         - fsl,imx8mp-media-blk-ctl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    audio_blk_ctl: clock-controller@30e20000 {
+       compatible = "fsl,imx8mp-audio-blk-ctl", "syscon";
+       reg = <0x30e20000 0x10000>;
+       power-domains = <&audiomix_pd>;
+
+       #clock-cells = <1>;
+       #reset-cells = <1>;
+    };
Signature · 1 line
2.7.4
maintainer Reviewed-by on v3 9/14
#12 lore raw

Re: [PATCH v3 09/14] Documentation: bindings: clk: Add bindings for i.MX BLK_CTL

Quoted 9 lines · Abel Vesa

Document the i.MX BLK_CTL with its devicetree properties.

---
 .../devicetree/bindings/clock/fsl,imx-blk-ctl.yaml | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author
#13 lore raw

PATCH v3 10/14 clk: imx: Add generic blk-ctl driver

In reply to Abel Vesa

The i.MX8MP platform introduces a new type of IP which is called BLK_CTL in RM and usually is comprised of some GPRs that are considered too generic to be part of any dedicated IP from that specific subsystem.

In general, some of the GPRs have some clock bits, some have reset bits, so in order to be able to use the imx clock API, this needs to be in a clock driver. From there it can use the reset controller API and leave the rest to the syscon.

---
 drivers/clk/imx/Makefile      |   2 +-
 drivers/clk/imx/clk-blk-ctl.c | 297 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-blk-ctl.h |  80 ++++++++++++
 3 files changed, 378 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-blk-ctl.c
 create mode 100644 drivers/clk/imx/clk-blk-ctl.h
drivers/clk/imx/Makefile +1 -1
index 79e53f2..105c117 100644
@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o
 
 obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o
 obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o
-obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o
+obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o
 obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
 
 obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o
drivers/clk/imx/clk-blk-ctl.c new file +297 -0

297 lines not on this page · raw message

drivers/clk/imx/clk-blk-ctl.h new file +80 -0

80 lines not on this page · raw message

Signature · 1 line
2.7.4
#14 lore raw

Re: [PATCH v3 10/14] clk: imx: Add generic blk-ctl driver

Quoted 55 lines · Abel Vesa

The i.MX8MP platform introduces a new type of IP which is called BLK_CTL in RM and usually is comprised of some GPRs that are considered too generic to be part of any dedicated IP from that specific subsystem.

In general, some of the GPRs have some clock bits, some have reset bits, so in order to be able to use the imx clock API, this needs to be in a clock driver. From there it can use the reset controller API and leave the rest to the syscon.

---
 drivers/clk/imx/Makefile      |   2 +-
 drivers/clk/imx/clk-blk-ctl.c | 297 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-blk-ctl.h |  80 ++++++++++++
 3 files changed, 378 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-blk-ctl.c
 create mode 100644 drivers/clk/imx/clk-blk-ctl.h
drivers/clk/imx/Makefile +1 -1
index 79e53f2..105c117 100644
@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o
 
 obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o
 obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o
-obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o
+obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o
 obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
 
 obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o
drivers/clk/imx/clk-blk-ctl.c new file +17 -0
new file mode 100644
index 00000000..1a6f1eb
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 NXP.
+ */
+
+#include <linux/clk.h>
+#include <linux/reset-controller.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/string.h>

drivers/clk/imx/clk-blk-ctl.c line 27

Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10 -0
+#include <linux/types.h>
+
+#include "clk.h"
+#include "clk-blk-ctl.h"
+
+struct imx_reset_hw {
+       u32 offset;
+       u32 shift;
+       u32 mask;
+       volatile unsigned long asserted;

Could you clarify a bit why need 'volatile' here?

Quoted 66 lines
drivers/clk/imx/clk-blk-ctl.c new file +66 -0
+};
+
+struct imx_pm_safekeep_info {
+       uint32_t *regs_values;
+       uint32_t *regs_offsets;
+       uint32_t regs_num;
+};
+
+struct imx_blk_ctl_drvdata {
+       void __iomem *base;
+       struct reset_controller_dev rcdev;
+       struct imx_reset_hw *rst_hws;
+       struct imx_pm_safekeep_info pm_info;
+
+       spinlock_t lock;
+};
+
+static void __maybe_unused imx_blk_ctl_read_write(struct device *dev,
+                                                       bool write)
+{
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info;
+       void __iomem *base = drvdata->base;
+       int i;
+
+       if (!pm_info->regs_num)
+               return;
+
+       for (i = 0; i < pm_info->regs_num; i++) {
+               u32 offset = pm_info->regs_offsets[i];
+
+               if (write)
+                       writel(pm_info->regs_values[i], base + offset);
+               else
+                       pm_info->regs_values[i] = readl(base + offset);
+       }
+
+}
+
+static int __maybe_unused imx_blk_ctl_runtime_suspend(struct device *dev)
+{
+       imx_blk_ctl_read_write(dev, false);
+
+       return 0;
+}
+
+static int __maybe_unused imx_blk_ctl_runtime_resume(struct device *dev)
+{
+       imx_blk_ctl_read_write(dev, true);
+
+       return 0;
+}
+
+const struct dev_pm_ops imx_blk_ctl_pm_ops = {
+       SET_RUNTIME_PM_OPS(imx_blk_ctl_runtime_suspend,
+                          imx_blk_ctl_runtime_resume, NULL)
+       SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+                          pm_runtime_force_resume)
+};
+EXPORT_SYMBOL_GPL(imx_blk_ctl_pm_ops);
+
+static int imx_blk_ctl_reset_set(struct reset_controller_dev *rcdev,
+                                 unsigned long id, bool assert)
+{
+       struct imx_blk_ctl_drvdata *drvdata = container_of(rcdev,
+                       struct imx_blk_ctl_drvdata, rcdev);

drivers/clk/imx/clk-blk-ctl.c line 103

Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10 -0
+       unsigned int offset = drvdata->rst_hws[id].offset;
+       unsigned int shift = drvdata->rst_hws[id].shift;
+       unsigned int mask = drvdata->rst_hws[id].mask;
+       void __iomem *reg_addr = drvdata->base + offset;
+       unsigned long flags;
+       u32 reg;
+
+       if (assert && !test_and_set_bit(1, &drvdata->rst_hws[id].asserted))
+               pm_runtime_get_sync(rcdev->dev);
+

i'm a bit confused because each reset hw has a field 'asserted' which means you're doing bit operations on each separate private variable. Is that what we want?

BTW, what if user calling deassert first?
Will that cause writing registers without enabling power domain?

Quoted 112 lines
drivers/clk/imx/clk-blk-ctl.c new file +112 -0
+       spin_lock_irqsave(&drvdata->lock, flags);
+
+       reg = readl(reg_addr);
+       if (assert)
+               writel(reg & ~(mask << shift), reg_addr);
+       else
+               writel(reg | (mask << shift), reg_addr);
+
+       spin_unlock_irqrestore(&drvdata->lock, flags);
+
+       if (!assert && test_and_clear_bit(1, &drvdata->rst_hws[id].asserted))
+               pm_runtime_put(rcdev->dev);
+
+       return 0;
+}
+
+static int imx_blk_ctl_reset_assert(struct reset_controller_dev *rcdev,
+                                          unsigned long id)
+{
+       return imx_blk_ctl_reset_set(rcdev, id, true);
+}
+
+static int imx_blk_ctl_reset_deassert(struct reset_controller_dev *rcdev,
+                                            unsigned long id)
+{
+       return imx_blk_ctl_reset_set(rcdev, id, false);
+}
+
+static const struct reset_control_ops imx_blk_ctl_reset_ops = {
+       .assert         = imx_blk_ctl_reset_assert,
+       .deassert       = imx_blk_ctl_reset_deassert,
+};
+
+static int imx_blk_ctl_register_reset_controller(struct device *dev)
+{
+       const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev);
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       int max = dev_data->resets_max;
+       struct imx_reset_hw *hws;
+       int i;
+
+       spin_lock_init(&drvdata->lock);
+
+       drvdata->rcdev.owner     = THIS_MODULE;
+       drvdata->rcdev.nr_resets = max;
+       drvdata->rcdev.ops       = &imx_blk_ctl_reset_ops;
+       drvdata->rcdev.of_node   = dev->of_node;
+       drvdata->rcdev.dev       = dev;
+
+       drvdata->rst_hws = devm_kcalloc(dev, max, sizeof(struct imx_reset_hw),
+                                       GFP_KERNEL);
+       hws = drvdata->rst_hws;
+
+       for (i = 0; i < dev_data->hws_num; i++) {
+               struct imx_blk_ctl_hw *hw = &dev_data->hws[i];
+
+               if (hw->type != BLK_CTL_RESET)
+                       continue;
+
+               hws[hw->id].offset = hw->offset;
+               hws[hw->id].shift = hw->shift;
+               hws[hw->id].mask = hw->mask;
+       }
+
+       return devm_reset_controller_register(dev, &drvdata->rcdev);
+}
+static struct clk_hw *imx_blk_ctl_register_one_clock(struct device *dev,
+                                               struct imx_blk_ctl_hw *hw)
+{
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       void __iomem *base = drvdata->base;
+       struct clk_hw *clk_hw = NULL;
+
+       switch (hw->type) {
+       case BLK_CTL_CLK_MUX:
+               clk_hw = imx_dev_clk_hw_mux_flags(dev, hw->name,
+                                                 base + hw->offset,
+                                                 hw->shift, hw->width,
+                                                 hw->parents,
+                                                 hw->parents_count,
+                                                 hw->flags);
+               break;
+       case BLK_CTL_CLK_GATE:
+               clk_hw = imx_dev_clk_hw_gate(dev, hw->name, hw->parents,
+                                            base + hw->offset, hw->shift);
+               break;
+       case BLK_CTL_CLK_SHARED_GATE:
+               clk_hw = imx_dev_clk_hw_gate_shared(dev, hw->name,
+                                                   hw->parents,
+                                                   base + hw->offset,
+                                                   hw->shift,
+                                                   hw->shared_count);
+               break;
+       case BLK_CTL_CLK_PLL14XX:
+               clk_hw = imx_dev_clk_hw_pll14xx(dev, hw->name, hw->parents,
+                                               base + hw->offset, hw->pll_tbl);
+               break;
+       };
+
+       return clk_hw;
+}
+
+static int imx_blk_ctl_register_clock_controller(struct device *dev)
+{
+       const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev);
+       struct clk_hw_onecell_data *clk_hw_data;
+       struct clk_hw **hws;
+       int i;
+
+       clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws,
+                               dev_data->hws_num), GFP_KERNEL);
+       if (WARN_ON(!clk_hw_data))

drivers/clk/imx/clk-blk-ctl.c line 225

Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10 -0
+               return -ENOMEM;
+
+       clk_hw_data->num = dev_data->clocks_max;
+       hws = clk_hw_data->hws;
+
+       for (i = 0; i < dev_data->hws_num; i++) {
+               struct imx_blk_ctl_hw *hw = &dev_data->hws[i];
+
+               hws[hw->id] = imx_blk_ctl_register_one_clock(dev, hw);
+               WARN(IS_ERR(hws[hw->id]), "failed to register clock %d", hw->id);

Is this line duplicated with the following imx_check_clk_hws()?

Regards
Aisheng

Quoted 161 lines
drivers/clk/imx/clk-blk-ctl.c new file +72 -0
+       }
+
+       imx_check_clk_hws(hws, dev_data->clocks_max);
+
+       return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+                                       clk_hw_data);
+}
+
+static int imx_blk_ctl_init_runtime_pm_safekeeping(struct device *dev)
+{
+       const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev);
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info;
+       u32 regs_num = dev_data->pm_runtime_saved_regs_num;
+       const u32 *regs_offsets = dev_data->pm_runtime_saved_regs;
+
+       if (!dev_data->pm_runtime_saved_regs_num)
+               return 0;
+
+       pm_info->regs_values = devm_kzalloc(dev,
+                                           sizeof(u32) * regs_num,
+                                           GFP_KERNEL);
+       if (WARN_ON(IS_ERR(pm_info->regs_values)))
+               return PTR_ERR(pm_info->regs_values);
+
+       pm_info->regs_offsets = kmemdup(regs_offsets,
+                                       regs_num * sizeof(u32), GFP_KERNEL);
+       if (WARN_ON(IS_ERR(pm_info->regs_offsets)))
+               return PTR_ERR(pm_info->regs_offsets);
+
+       pm_info->regs_num = regs_num;
+
+       return 0;
+}
+
+int imx_blk_ctl_probe(struct platform_device *pdev)
+{
+       struct imx_blk_ctl_drvdata *drvdata;
+       struct device *dev = &pdev->dev;
+       int ret;
+
+       drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+       if (WARN_ON(!drvdata))
+               return -ENOMEM;
+
+       drvdata->base = devm_platform_ioremap_resource(pdev, 0);
+       if (WARN_ON(IS_ERR(drvdata->base)))
+               return PTR_ERR(drvdata->base);
+
+       dev_set_drvdata(dev, drvdata);
+
+       ret = imx_blk_ctl_init_runtime_pm_safekeeping(dev);
+       if (ret)
+               return ret;
+
+       pm_runtime_get_noresume(dev);
+       pm_runtime_set_active(dev);
+       pm_runtime_enable(dev);
+
+       ret = imx_blk_ctl_register_clock_controller(dev);
+       if (ret) {
+               pm_runtime_put(dev);
+               return ret;
+       }
+
+       ret = imx_blk_ctl_register_reset_controller(dev);
+
+       pm_runtime_put(dev);
+
+       return ret;
+}
+EXPORT_SYMBOL_GPL(imx_blk_ctl_probe);
drivers/clk/imx/clk-blk-ctl.h new file +80 -1
new file mode 100644
index 00000000..e5bf723
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_IMX_CLK_BLK_CTL_H
+#define __MACH_IMX_CLK_BLK_CTL_H
+
+enum imx_blk_ctl_hw_type {
+       BLK_CTL_CLK_MUX,
+       BLK_CTL_CLK_GATE,
+       BLK_CTL_CLK_SHARED_GATE,
+       BLK_CTL_CLK_PLL14XX,
+       BLK_CTL_RESET,
+};
+
+struct imx_blk_ctl_hw {
+       int type;
+       char *name;
+       u32 offset;
+       u32 shift;
+       u32 mask;
+       u32 width;
+       u32 flags;
+       u32 id;
+       const void *parents;
+       u32 parents_count;
+       int *shared_count;
+       const struct imx_pll14xx_clk *pll_tbl;
+};
+
+struct imx_blk_ctl_dev_data {
+       struct imx_blk_ctl_hw *hws;
+       u32 hws_num;
+
+       u32 clocks_max;
+       u32 resets_max;
+
+       u32 pm_runtime_saved_regs_num;
+       u32 pm_runtime_saved_regs[];
+};
+
+#define IMX_BLK_CTL(_type, _name, _id, _offset, _shift, _width, _mask, _parents, _parents_count, _flags, sh_count, _pll_tbl) \
+       {                                               \
+               .type = _type,                          \
+               .name = _name,                          \
+               .id = _id,                              \
+               .offset = _offset,                      \
+               .shift = _shift,                        \
+               .width = _width,                        \
+               .mask = _mask,                          \
+               .parents = _parents,                    \
+               .parents_count = _parents_count,        \
+               .flags = _flags,                        \
+               .shared_count = sh_count,               \
+               .pll_tbl = _pll_tbl,                    \
+       }
+
+#define IMX_BLK_CTL_CLK_MUX(_name, _id, _offset, _shift, _width, _parents) \
+       IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), 0, NULL, NULL)
+
+#define IMX_BLK_CTL_CLK_MUX_FLAGS(_name, _id, _offset, _shift, _width, _parents, _flags) \
+       IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), _flags, NULL, NULL)
+
+#define IMX_BLK_CTL_CLK_GATE(_name, _id, _offset, _shift, _parents) \
+       IMX_BLK_CTL(BLK_CTL_CLK_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, NULL, NULL)
+
+#define IMX_BLK_CTL_CLK_SHARED_GATE(_name, _id, _offset, _shift, _parents, sh_count) \
+       IMX_BLK_CTL(BLK_CTL_CLK_SHARED_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, sh_count, NULL)
+
+#define IMX_BLK_CTL_CLK_PLL14XX(_name, _id, _offset, _parents, _pll_tbl) \
+       IMX_BLK_CTL(BLK_CTL_CLK_PLL14XX, _name, _id, _offset, 0, 0, 0, _parents, 1, 0, NULL, _pll_tbl)
+
+#define IMX_BLK_CTL_RESET(_id, _offset, _shift) \
+       IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, 1, NULL, 0, 0, NULL, NULL)
+
+#define IMX_BLK_CTL_RESET_MASK(_id, _offset, _shift, mask) \
+       IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, mask, NULL, 0, 0, NULL, NULL)
+
+extern const struct dev_pm_ops imx_blk_ctl_pm_ops;
+
+int imx_blk_ctl_probe(struct platform_device *pdev);
+
+#endif
--

2.7.4

author
#15 lore raw

Re: [PATCH v3 10/14] clk: imx: Add generic blk-ctl driver

Quoted 60 lines · Dong Aisheng
Quoted 59 lines · Abel Vesa

The i.MX8MP platform introduces a new type of IP which is called BLK_CTL in RM and usually is comprised of some GPRs that are considered too generic to be part of any dedicated IP from that specific subsystem.

In general, some of the GPRs have some clock bits, some have reset bits, so in order to be able to use the imx clock API, this needs to be in a clock driver. From there it can use the reset controller API and leave the rest to the syscon.

---
 drivers/clk/imx/Makefile      |   2 +-
 drivers/clk/imx/clk-blk-ctl.c | 297 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-blk-ctl.h |  80 ++++++++++++
 3 files changed, 378 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-blk-ctl.c
 create mode 100644 drivers/clk/imx/clk-blk-ctl.h
drivers/clk/imx/Makefile +1 -1
index 79e53f2..105c117 100644
@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o
 
 obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o
 obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o
-obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o
+obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o
 obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
 
 obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o
drivers/clk/imx/clk-blk-ctl.c new file +21 -0
new file mode 100644
index 00000000..1a6f1eb
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 NXP.
+ */
+
+#include <linux/clk.h>
+#include <linux/reset-controller.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include "clk.h"
+#include "clk-blk-ctl.h"
Quoted 9 lines

drivers/clk/imx/clk-blk-ctl.c line 27

Quoted 6 lines
drivers/clk/imx/clk-blk-ctl.c new file +6 -0
+
+struct imx_reset_hw {
+       u32 offset;
+       u32 shift;
+       u32 mask;
+       volatile unsigned long asserted;

Could you clarify a bit why need 'volatile' here?

Sorry for the late reply.

Tried something different before sending this version. Will drop it.

Quoted 64 lines
Quoted 64 lines
drivers/clk/imx/clk-blk-ctl.c new file +64 -0
+};
+
+struct imx_pm_safekeep_info {
+       uint32_t *regs_values;
+       uint32_t *regs_offsets;
+       uint32_t regs_num;
+};
+
+struct imx_blk_ctl_drvdata {
+       void __iomem *base;
+       struct reset_controller_dev rcdev;
+       struct imx_reset_hw *rst_hws;
+       struct imx_pm_safekeep_info pm_info;
+
+       spinlock_t lock;
+};
+
+static void __maybe_unused imx_blk_ctl_read_write(struct device *dev,
+                                                       bool write)
+{
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info;
+       void __iomem *base = drvdata->base;
+       int i;
+
+       if (!pm_info->regs_num)
+               return;
+
+       for (i = 0; i < pm_info->regs_num; i++) {
+               u32 offset = pm_info->regs_offsets[i];
+
+               if (write)
+                       writel(pm_info->regs_values[i], base + offset);
+               else
+                       pm_info->regs_values[i] = readl(base + offset);
+       }
+
+}
+
+static int __maybe_unused imx_blk_ctl_runtime_suspend(struct device *dev)
+{
+       imx_blk_ctl_read_write(dev, false);
+
+       return 0;
+}
+
+static int __maybe_unused imx_blk_ctl_runtime_resume(struct device *dev)
+{
+       imx_blk_ctl_read_write(dev, true);
+
+       return 0;
+}
+
+const struct dev_pm_ops imx_blk_ctl_pm_ops = {
+       SET_RUNTIME_PM_OPS(imx_blk_ctl_runtime_suspend,
+                          imx_blk_ctl_runtime_resume, NULL)
+       SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+                          pm_runtime_force_resume)
+};
+EXPORT_SYMBOL_GPL(imx_blk_ctl_pm_ops);
+
+static int imx_blk_ctl_reset_set(struct reset_controller_dev *rcdev,
+                                 unsigned long id, bool assert)
+{
Quoted 8 lines

drivers/clk/imx/clk-blk-ctl.c line 99

Quoted 8 lines
drivers/clk/imx/clk-blk-ctl.c new file +8 -0
+       struct imx_blk_ctl_drvdata *drvdata = container_of(rcdev,
+                       struct imx_blk_ctl_drvdata, rcdev);
+       unsigned int offset = drvdata->rst_hws[id].offset;
+       unsigned int shift = drvdata->rst_hws[id].shift;
+       unsigned int mask = drvdata->rst_hws[id].mask;
+       void __iomem *reg_addr = drvdata->base + offset;
+       unsigned long flags;
+       u32 reg;

As for the, calling deassert first issue, I was thinking maybe we can add the following here:

	    if (!assert && !test_bit(1, &drvdata->rst_hws[id].asserted))
                    return -ENODEV;

What do you think ?

Quoted 9 lines

drivers/clk/imx/clk-blk-ctl.c line 103

Quoted 4 lines
drivers/clk/imx/clk-blk-ctl.c new file +4 -0
+
+       if (assert && !test_and_set_bit(1, &drvdata->rst_hws[id].asserted))
+               pm_runtime_get_sync(rcdev->dev);
+

i'm a bit confused because each reset hw has a field 'asserted' which means you're doing bit operations on each separate private variable. Is that what we want?

Yes, basically, we want to do pm_runtime_get_sync every time
there is a assert request for some specific reset bit only if
that reset bit was not asserted before. That's the purpose of the 'asserted' field.

Same goes for the pm_runtime_put but the condition is reversed.

Quoted 292 lines

BTW, what if user calling deassert first?
Will that cause writing registers without enabling power domain?

Quoted 112 lines
drivers/clk/imx/clk-blk-ctl.c new file +112 -0
+       spin_lock_irqsave(&drvdata->lock, flags);
+
+       reg = readl(reg_addr);
+       if (assert)
+               writel(reg & ~(mask << shift), reg_addr);
+       else
+               writel(reg | (mask << shift), reg_addr);
+
+       spin_unlock_irqrestore(&drvdata->lock, flags);
+
+       if (!assert && test_and_clear_bit(1, &drvdata->rst_hws[id].asserted))
+               pm_runtime_put(rcdev->dev);
+
+       return 0;
+}
+
+static int imx_blk_ctl_reset_assert(struct reset_controller_dev *rcdev,
+                                          unsigned long id)
+{
+       return imx_blk_ctl_reset_set(rcdev, id, true);
+}
+
+static int imx_blk_ctl_reset_deassert(struct reset_controller_dev *rcdev,
+                                            unsigned long id)
+{
+       return imx_blk_ctl_reset_set(rcdev, id, false);
+}
+
+static const struct reset_control_ops imx_blk_ctl_reset_ops = {
+       .assert         = imx_blk_ctl_reset_assert,
+       .deassert       = imx_blk_ctl_reset_deassert,
+};
+
+static int imx_blk_ctl_register_reset_controller(struct device *dev)
+{
+       const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev);
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       int max = dev_data->resets_max;
+       struct imx_reset_hw *hws;
+       int i;
+
+       spin_lock_init(&drvdata->lock);
+
+       drvdata->rcdev.owner     = THIS_MODULE;
+       drvdata->rcdev.nr_resets = max;
+       drvdata->rcdev.ops       = &imx_blk_ctl_reset_ops;
+       drvdata->rcdev.of_node   = dev->of_node;
+       drvdata->rcdev.dev       = dev;
+
+       drvdata->rst_hws = devm_kcalloc(dev, max, sizeof(struct imx_reset_hw),
+                                       GFP_KERNEL);
+       hws = drvdata->rst_hws;
+
+       for (i = 0; i < dev_data->hws_num; i++) {
+               struct imx_blk_ctl_hw *hw = &dev_data->hws[i];
+
+               if (hw->type != BLK_CTL_RESET)
+                       continue;
+
+               hws[hw->id].offset = hw->offset;
+               hws[hw->id].shift = hw->shift;
+               hws[hw->id].mask = hw->mask;
+       }
+
+       return devm_reset_controller_register(dev, &drvdata->rcdev);
+}
+static struct clk_hw *imx_blk_ctl_register_one_clock(struct device *dev,
+                                               struct imx_blk_ctl_hw *hw)
+{
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       void __iomem *base = drvdata->base;
+       struct clk_hw *clk_hw = NULL;
+
+       switch (hw->type) {
+       case BLK_CTL_CLK_MUX:
+               clk_hw = imx_dev_clk_hw_mux_flags(dev, hw->name,
+                                                 base + hw->offset,
+                                                 hw->shift, hw->width,
+                                                 hw->parents,
+                                                 hw->parents_count,
+                                                 hw->flags);
+               break;
+       case BLK_CTL_CLK_GATE:
+               clk_hw = imx_dev_clk_hw_gate(dev, hw->name, hw->parents,
+                                            base + hw->offset, hw->shift);
+               break;
+       case BLK_CTL_CLK_SHARED_GATE:
+               clk_hw = imx_dev_clk_hw_gate_shared(dev, hw->name,
+                                                   hw->parents,
+                                                   base + hw->offset,
+                                                   hw->shift,
+                                                   hw->shared_count);
+               break;
+       case BLK_CTL_CLK_PLL14XX:
+               clk_hw = imx_dev_clk_hw_pll14xx(dev, hw->name, hw->parents,
+                                               base + hw->offset, hw->pll_tbl);
+               break;
+       };
+
+       return clk_hw;
+}
+
+static int imx_blk_ctl_register_clock_controller(struct device *dev)
+{
+       const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev);
+       struct clk_hw_onecell_data *clk_hw_data;
+       struct clk_hw **hws;
+       int i;
+
+       clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws,
+                               dev_data->hws_num), GFP_KERNEL);
+       if (WARN_ON(!clk_hw_data))

drivers/clk/imx/clk-blk-ctl.c line 225

Quoted 10 lines
drivers/clk/imx/clk-blk-ctl.c new file +10 -0
+               return -ENOMEM;
+
+       clk_hw_data->num = dev_data->clocks_max;
+       hws = clk_hw_data->hws;
+
+       for (i = 0; i < dev_data->hws_num; i++) {
+               struct imx_blk_ctl_hw *hw = &dev_data->hws[i];
+
+               hws[hw->id] = imx_blk_ctl_register_one_clock(dev, hw);
+               WARN(IS_ERR(hws[hw->id]), "failed to register clock %d", hw->id);

Is this line duplicated with the following imx_check_clk_hws()?

Regards
Aisheng

Quoted 161 lines
drivers/clk/imx/clk-blk-ctl.c new file +72 -0
+       }
+
+       imx_check_clk_hws(hws, dev_data->clocks_max);
+
+       return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+                                       clk_hw_data);
+}
+
+static int imx_blk_ctl_init_runtime_pm_safekeeping(struct device *dev)
+{
+       const struct imx_blk_ctl_dev_data *dev_data = of_device_get_match_data(dev);
+       struct imx_blk_ctl_drvdata *drvdata = dev_get_drvdata(dev);
+       struct imx_pm_safekeep_info *pm_info = &drvdata->pm_info;
+       u32 regs_num = dev_data->pm_runtime_saved_regs_num;
+       const u32 *regs_offsets = dev_data->pm_runtime_saved_regs;
+
+       if (!dev_data->pm_runtime_saved_regs_num)
+               return 0;
+
+       pm_info->regs_values = devm_kzalloc(dev,
+                                           sizeof(u32) * regs_num,
+                                           GFP_KERNEL);
+       if (WARN_ON(IS_ERR(pm_info->regs_values)))
+               return PTR_ERR(pm_info->regs_values);
+
+       pm_info->regs_offsets = kmemdup(regs_offsets,
+                                       regs_num * sizeof(u32), GFP_KERNEL);
+       if (WARN_ON(IS_ERR(pm_info->regs_offsets)))
+               return PTR_ERR(pm_info->regs_offsets);
+
+       pm_info->regs_num = regs_num;
+
+       return 0;
+}
+
+int imx_blk_ctl_probe(struct platform_device *pdev)
+{
+       struct imx_blk_ctl_drvdata *drvdata;
+       struct device *dev = &pdev->dev;
+       int ret;
+
+       drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+       if (WARN_ON(!drvdata))
+               return -ENOMEM;
+
+       drvdata->base = devm_platform_ioremap_resource(pdev, 0);
+       if (WARN_ON(IS_ERR(drvdata->base)))
+               return PTR_ERR(drvdata->base);
+
+       dev_set_drvdata(dev, drvdata);
+
+       ret = imx_blk_ctl_init_runtime_pm_safekeeping(dev);
+       if (ret)
+               return ret;
+
+       pm_runtime_get_noresume(dev);
+       pm_runtime_set_active(dev);
+       pm_runtime_enable(dev);
+
+       ret = imx_blk_ctl_register_clock_controller(dev);
+       if (ret) {
+               pm_runtime_put(dev);
+               return ret;
+       }
+
+       ret = imx_blk_ctl_register_reset_controller(dev);
+
+       pm_runtime_put(dev);
+
+       return ret;
+}
+EXPORT_SYMBOL_GPL(imx_blk_ctl_probe);
drivers/clk/imx/clk-blk-ctl.h new file +80 -1
new file mode 100644
index 00000000..e5bf723
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __MACH_IMX_CLK_BLK_CTL_H
+#define __MACH_IMX_CLK_BLK_CTL_H
+
+enum imx_blk_ctl_hw_type {
+       BLK_CTL_CLK_MUX,
+       BLK_CTL_CLK_GATE,
+       BLK_CTL_CLK_SHARED_GATE,
+       BLK_CTL_CLK_PLL14XX,
+       BLK_CTL_RESET,
+};
+
+struct imx_blk_ctl_hw {
+       int type;
+       char *name;
+       u32 offset;
+       u32 shift;
+       u32 mask;
+       u32 width;
+       u32 flags;
+       u32 id;
+       const void *parents;
+       u32 parents_count;
+       int *shared_count;
+       const struct imx_pll14xx_clk *pll_tbl;
+};
+
+struct imx_blk_ctl_dev_data {
+       struct imx_blk_ctl_hw *hws;
+       u32 hws_num;
+
+       u32 clocks_max;
+       u32 resets_max;
+
+       u32 pm_runtime_saved_regs_num;
+       u32 pm_runtime_saved_regs[];
+};
+
+#define IMX_BLK_CTL(_type, _name, _id, _offset, _shift, _width, _mask, _parents, _parents_count, _flags, sh_count, _pll_tbl) \
+       {                                               \
+               .type = _type,                          \
+               .name = _name,                          \
+               .id = _id,                              \
+               .offset = _offset,                      \
+               .shift = _shift,                        \
+               .width = _width,                        \
+               .mask = _mask,                          \
+               .parents = _parents,                    \
+               .parents_count = _parents_count,        \
+               .flags = _flags,                        \
+               .shared_count = sh_count,               \
+               .pll_tbl = _pll_tbl,                    \
+       }
+
+#define IMX_BLK_CTL_CLK_MUX(_name, _id, _offset, _shift, _width, _parents) \
+       IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), 0, NULL, NULL)
+
+#define IMX_BLK_CTL_CLK_MUX_FLAGS(_name, _id, _offset, _shift, _width, _parents, _flags) \
+       IMX_BLK_CTL(BLK_CTL_CLK_MUX, _name, _id, _offset, _shift, _width, 0, _parents, ARRAY_SIZE(_parents), _flags, NULL, NULL)
+
+#define IMX_BLK_CTL_CLK_GATE(_name, _id, _offset, _shift, _parents) \
+       IMX_BLK_CTL(BLK_CTL_CLK_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, NULL, NULL)
+
+#define IMX_BLK_CTL_CLK_SHARED_GATE(_name, _id, _offset, _shift, _parents, sh_count) \
+       IMX_BLK_CTL(BLK_CTL_CLK_SHARED_GATE, _name, _id, _offset, _shift, 1, 0, _parents, 1, 0, sh_count, NULL)
+
+#define IMX_BLK_CTL_CLK_PLL14XX(_name, _id, _offset, _parents, _pll_tbl) \
+       IMX_BLK_CTL(BLK_CTL_CLK_PLL14XX, _name, _id, _offset, 0, 0, 0, _parents, 1, 0, NULL, _pll_tbl)
+
+#define IMX_BLK_CTL_RESET(_id, _offset, _shift) \
+       IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, 1, NULL, 0, 0, NULL, NULL)
+
+#define IMX_BLK_CTL_RESET_MASK(_id, _offset, _shift, mask) \
+       IMX_BLK_CTL(BLK_CTL_RESET, NULL, _id, _offset, _shift, 0, mask, NULL, 0, 0, NULL, NULL)
+
+extern const struct dev_pm_ops imx_blk_ctl_pm_ops;
+
+int imx_blk_ctl_probe(struct platform_device *pdev);
+
+#endif
--

2.7.4

author
#16 lore raw

PATCH v3 11/14 clk: imx: Add blk-ctl driver for i.MX8MP

In reply to Abel Vesa

This driver is intended to work with the following BLK_CTL IPs found in i.MX8MP:
- Audio
- Media
- HDMI

---
 drivers/clk/imx/Makefile             |   2 +-
 drivers/clk/imx/clk-blk-ctl-imx8mp.c | 313 +++++++++++++++++++++++++++++++++++
 2 files changed, 314 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-blk-ctl-imx8mp.c
drivers/clk/imx/Makefile +1 -1
index 105c117..e3aaf76 100644
@@ -23,7 +23,7 @@ obj-$(CONFIG_MXC_CLK) += mxc-clk.o
 
 obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o
 obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o
-obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o
+obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-blk-ctl.o clk-blk-ctl-imx8mp.o
 obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
 
 obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o
drivers/clk/imx/clk-blk-ctl-imx8mp.c new file +313 -0

313 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#17 lore raw

PATCH v3 12/14 arm64: dts: imx8mp: Add audio_blk_ctl node

In reply to Abel Vesa

Some of the features of the audio_ctl will be used by some different drivers in a way those drivers will know best, so adding the syscon compatible we allow those to do just that. Only the resets and the clocks are registered bit the clk-blk-ctl driver.

---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +15 -0
index cad2dd7..3541fd9 100644
@@ -736,6 +736,21 @@
 			};
 		};
 
+		aips5: bus@30c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			audio_blk_ctl: clock-controller@30e20000 {
+				compatible = "fsl,imx8mp-audio-blk-ctl", "syscon";
+				reg = <0x30e20000 0x50c>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
Signature · 1 line
2.7.4
author
#18 lore raw

PATCH v3 13/14 arm64: dts: imx8mp: Add media_blk_ctl node

In reply to Abel Vesa

Some of the features of the media_ctl will be used by some different drivers in a way those drivers will know best, so adding the syscon compatible we allow those to do just that. Only the resets and the clocks are registered bit the clk-blk-ctl driver.

---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +15 -0
index 3541fd9..3a5ccef 100644
@@ -736,6 +736,21 @@
 			};
 		};
 
+		aips4: bus@32c00000 {
+			compatible = "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			media_blk_ctl: clock-controller@32ec0000 {
+				compatible = "fsl,imx8mp-media-blk-ctl", "syscon";
+				reg = <0x32ec0000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
 		aips5: bus@30c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x30c00000 0x400000>;
Signature · 1 line
2.7.4
author
#19 lore raw

PATCH v3 14/14 arm64: dts: imx8mp: Add hdmi_blk_ctl node

In reply to Abel Vesa

Some of the features of the hdmi_ctl will be used by some different drivers in a way those drivers will know best, so adding the syscon compatible we allow those to do just that. Only the resets and the clocks are registered bit the clk-blk-ctl driver.

---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +7 -0
index 3a5ccef..0cf4fa1 100644
@@ -749,6 +749,13 @@
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 			};
+
+			hdmi_blk_ctl: clock-controller@32fc0000 {
+				compatible = "fsl,imx8mp-hdmi-blk-ctl", "syscon";
+				reg = <0x32fc0000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
 		};
 
 		aips5: bus@30c00000 {
Signature · 1 line
2.7.4