Skip to contentSkip to conversation

Help/Clue to improve Z-turn board support

U-Boot Alexandre GRIVEAUX 1 participant 2 messages Jan 15, 2019 – Jan 25, 2019

lore
Share & tools
lore
#0 lore raw

Hello,

I tried to have mainline uboot for Z-turn board (patch sent in December, wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board) Even with the right ps7_init_gpl.c : the board doesn't boot.

I tried to correct zynq-zturn.dts [0] because I don't find MYIR references in drivers from this line: compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
And the HEADER is not the same as the other boards: same result.

Picking a board (microzed) with zturn DTS above and using microzed_defconfig provide some good result to me (except for ethernet)

According to the build messages between zturn and microzed, the make command doesn't create this SPL files:

spl/board/xilinx/zynq/.built-in.o.cmd spl/board/xilinx/zynq/built-in.o spl/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.o spl/board/xilinx/zynq/zynq-microzed/.ps7_init_gpl.o.cmd spl/u-boot-spl

I don’t have a clue how to resolv that.
Do you have any idea ?

Thanks

[0] Exemple taken from
https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf

#1 lore raw

Le 2019-01-15 13:53, Alexandre GRIVEAUX a écrit :

Quoted 28 lines

Hello,

I tried to have mainline uboot for Z-turn board (patch sent in December, wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board)
Even with the right ps7_init_gpl.c : the board doesn't boot.

I tried to correct zynq-zturn.dts [0] because I don't find MYIR references in drivers from this line: compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
And the HEADER is not the same as the other boards: same result.

Picking a board (microzed) with zturn DTS above and using microzed_defconfig provide some good result to me (except for ethernet)

According to the build messages between zturn and microzed, the make command doesn't create this SPL files:

spl/board/xilinx/zynq/.built-in.o.cmd spl/board/xilinx/zynq/built-in.o spl/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.o spl/board/xilinx/zynq/zynq-microzed/.ps7_init_gpl.o.cmd spl/u-boot-spl

I don’t have a clue how to resolv that.
Do you have any idea ?

Quoted 8 lines

Thanks

[0] Exemple taken from
https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot

Hello,

Nobody to help me ?

Thanks.