Help/Clue to improve Z-turn board support
Hello,
I tried to have mainline uboot for Z-turn board (patch sent in December, wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board) Even with the right ps7_init_gpl.c : the board doesn't boot.
I tried to correct zynq-zturn.dts [0] because I don't find MYIR references in drivers from this line: compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
And the HEADER is not the same as the other boards: same result.
Picking a board (microzed) with zturn DTS above and using microzed_defconfig provide some good result to me (except for ethernet)
According to the build messages between zturn and microzed, the make command doesn't create this SPL files:
spl/board/xilinx/zynq/.built-in.o.cmd spl/board/xilinx/zynq/built-in.o spl/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.o spl/board/xilinx/zynq/zynq-microzed/.ps7_init_gpl.o.cmd spl/u-boot-spl
I don’t have a clue how to resolv that.
Do you have any idea ?
Thanks
[0] Exemple taken from
https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf
Le 2019-01-15 13:53, Alexandre GRIVEAUX a écrit :
Quoted 28 lines
Hello,
I tried to have mainline uboot for Z-turn board (patch sent in December, wrong window: [PATCH] ARM: zynq: Adding
ps7_init_gpl.cfor Z-turn board)
Even with the rightps7_init_gpl.c: the board doesn't boot.I tried to correct
zynq-zturn.dts[0] because I don't find MYIR references in drivers from this line: compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
And the HEADER is not the same as the other boards: same result.Picking a board (microzed) with zturn DTS above and using
microzed_defconfigprovide some good result to me (except for ethernet)According to the build messages between zturn and microzed, the make command doesn't create this SPL files:
spl/board/xilinx/zynq/.built-in.o.cmd
spl/board/xilinx/zynq/built-in.ospl/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.ospl/board/xilinx/zynq/zynq-microzed/.ps7_init_gpl.o.cmd spl/u-boot-splI don’t have a clue how to resolv that.
Do you have any idea ?
Quoted 8 lines
Thanks
[0] Exemple taken from
https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Hello,
Nobody to help me ?
Thanks.