How to put 16bit none audio PCM data stream into a 32bit none audio S/P-DIF transport stream?
Hello,
I have an AC3 receiver which uses the bit flags of the S/P-DIF transport stream for identifying none audio, and I use the cs46xx driver for my Hercules Digifire 7.1 (under windows, using the included DVD player I could have a real 5.1).
Under linux using ALSA, all I get is a cliking sound... does anyone know how I could solve this (without changing my hardware of course)?
I have looked at the source, but it's far too complicated for me...
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 9 lines
I have an AC3 receiver which uses the bit flags of the S/P-DIF transport stream for identifying none audio, and I use the cs46xx driver for my Hercules Digifire 7.1 (under windows, using the included DVD player I could have a real 5.1).
Under linux using ALSA, all I get is a cliking sound... does anyone know how I could solve this (without changing my hardware of course)?
I have looked at the source, but it's far too complicated for me...
define a new plughw PCM device in ~/.asoundrc, and use that. unfortunately, i don't know how to do that, i just know that you can do it.
--p
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
At Tue, 08 Apr 2003 10:28:09 -0400,
Quoted 6 lines · Paul Davis
Quoted 6 lines
I have an AC3 receiver which uses the bit flags of the S/P-DIF transport stream for identifying none audio, and I use the cs46xx driver for my Hercules Digifire 7.1 (under windows, using the included DVD player I could have a real 5.1).
Quoted 8 lines
Quoted 4 lines
Under linux using ALSA, all I get is a cliking sound... does anyone know how I could solve this (without changing my hardware of course)?
I have looked at the source, but it's far too complicated for me...
define a new plughw PCM device in ~/.asoundrc, and use that. unfortunately, i don't know how to do that, i just know that you can do it.
i'm afraid that it's not so easy as it sounds. it strongly depends on the hardware driver implementation...
about AC3, 32bit spdif is likely irrelevant. A52 (AC3) is usally packed into normal 16bit frames.
does the click happen even if you use alsa-tool's ac3dec?
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 7 lines · Takashi Iwai
i'm afraid that it's not so easy as it sounds. it strongly depends on the hardware driver implementation...
about AC3, 32bit spdif is likely irrelevant. A52 (AC3) is usally packed into normal 16bit frames.
does the click happen even if you use alsa-tool's ac3dec?
Yes and no:
./ac3dec -C /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 don't produce any sound at all now... except ONE big click at the beginning, same with -P and
./ac3dec -R /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 5.1 Mode 44.1 KHz 256 kbps Complete Main Audio Service Using PCM device 'iec958:AES0=0x0,AES1=0x82,AES2=0x0,AES3=0x2'
Produces also the same big click and then plays quiete good (only 2.0 no dolby digital is sent to the receiver...).
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 23 lines · Gregoire Favre
Quoted 9 lines · Takashi Iwai
i'm afraid that it's not so easy as it sounds. it strongly depends on the hardware driver implementation...
about AC3, 32bit spdif is likely irrelevant. A52 (AC3) is usally packed into normal 16bit frames.
does the click happen even if you use alsa-tool's ac3dec?
Yes and no:
./ac3dec -C /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 don't produce any sound at all now... except ONE big click at the beginning, same with -P and
./ac3dec -R /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 5.1 Mode 44.1 KHz 256 kbps Complete Main Audio Service Using PCM device 'iec958:AES0=0x0,AES1=0x82,AES2=0x0,AES3=0x2'
Quoted 11 lines
Produces also the same big click and then plays quiete good (only 2.0 no dolby digital is sent to the receiver...).
Thank you very much,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
On my SB Live, with AC3 I use: -
PCM device "iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2"
On your example AES0=0x0, whereas I have AES0=0x6. It is AES0 which sets the non-audio bits in the SPDIF.
Cheers
James
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 5 lines · James Courtier-Dutton
On my SB Live, with AC3 I use: -
PCM device "iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2"On your example AES0=0x0, whereas I have AES0=0x6. It is AES0 which sets the non-audio bits in the SPDIF.
Exactly, it's what I also got with other option to obtain ac3... I have tested lots of option (and other users also have, as reported to this list) and with ac3 receivershich uses the bit flags of the S/P-DIF transport stream for identifying none audio loose :-(
Of course I only speak for cs46xx.
Either no sound, or only cliking sound...
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 25 lines · James Courtier-Dutton
Quoted 23 lines · Gregoire Favre
Quoted 8 lines · Takashi Iwai
i'm afraid that it's not so easy as it sounds. it strongly depends on the hardware driver implementation...
about AC3, 32bit spdif is likely irrelevant. A52 (AC3) is usally packed into normal 16bit frames.
does the click happen even if you use alsa-tool's ac3dec?
Yes and no:
./ac3dec -C /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 don't produce any sound at all now... except ONE big click at the beginning, same with -P and
./ac3dec -R /data/linux/dvb/from_beyond_the_edge_44k_256kbps.ac3 5.1 Mode 44.1 KHz 256 kbps Complete Main Audio Service Using PCM device 'iec958:AES0=0x0,AES1=0x82,AES2=0x0,AES3=0x2'
Quoted 9 lines
Quoted 8 lines
Produces also the same big click and then plays quiete good (only 2.0 no dolby digital is sent to the receiver...).
Thank you very much,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
Can you send me a URL so that I can download "from_beyond_the_edge_44k_256kbps.ac3" and test it on my system.
My external AC3 decoder requires the info bits to be set to "non-audio" just like yours.
I might be able to get it working if I have a sample stream.
I have been wanting to get 44.1khz AC3 working for a long time, but have never had a stream to play with.
I understand that you can get some enharnaced CDs now which have non-audio AC3 data on them instead of PCM, and I would like to be able to play these in linux. Cheers
James
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 2 lines · James Courtier-Dutton
Can you send me a URL so that I can download "from_beyond_the_edge_44k_256kbps.ac3" and test it on my system.
Sure: it's from http://www.diatonis.com/downloads.html
I don't know whether it's still there or not, if not, I could send it to you without problem ;-)
Quoted 3 lines
My external AC3 decoder requires the info bits to be set to "non-audio" just like yours.
I might be able to get it working if I have a sample stream.
To be honnest, I have no interest in beeing able to hear such "songs":
all I want is to hear 5.1 DVD and 5.1 TV channels...
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 19 lines · Gregoire Favre
Quoted 3 lines · James Courtier-Dutton
Can you send me a URL so that I can download "from_beyond_the_edge_44k_256kbps.ac3" and test it on my system.
Sure: it's from http://www.diatonis.com/downloads.html
I don't know whether it's still there or not, if not, I could send it to you without problem ;-)Quoted 4 lines
My external AC3 decoder requires the info bits to be set to "non-audio" just like yours. I might be able to get it working if I have a sample stream.
Quoted 10 lines
To be honnest, I have no interest in beeing able to hear such "songs":
all I want is to hear 5.1 DVD and 5.1 TV channels...Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
Well, I have downloaded
http://www.skwmedia.com/media/diatonis/ac3/diatonis_last_summer_rain_ac3_256kbps.zip
It says that the files available before have been removed because they appeared to be corrupt. My it is a corrupt file you are working with.
Cheers
James
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 6 lines · James Courtier-Dutton
Well, I have downloaded
http://www.skwmedia.com/media/diatonis/ac3/diatonis_last_summer_rain_ac3_256kbps.zipIt says that the files available before have been removed because they appeared to be corrupt.
My it is a corrupt file you are working with.
I don't think so as I got same result with ac3 files I made from recording from TV, and also when playing DVD...
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 11 lines · James Courtier-Dutton
Well, I have downloaded
http://www.skwmedia.com/media/diatonis/ac3/diatonis_last_summer_rain_ac3_256kbps.zipIt says that the files available before have been removed because they appeared to be corrupt. My it is a corrupt file you are working with.
Cheers
James
To help you. In order to play this ac3 file, unzip it and you will get a .wav file.
Then use this command to send it to the SPDIF socket in non-audio passthru mode for your external AC3 decoder to recognise. aplay -D "iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2" a.wav
Where "a.wav" is the name of the .WAV file.
Cheers
James
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 11 lines
i'm afraid that it's not so easy as it sounds. it strongly depends on the hardware driver implementation...
about AC3, 32bit spdif is likely irrelevant. A52 (AC3) is usally packed into normal 16bit frames.
does the click happen even if you use alsa-tool's ac3dec?
Exaclty what do you mean with 32bit spdif ? Sorry, I feel a little bit newbie about the SPDIF protocol specific details.
From the cs46xx driver point of view, 48khz 16bit audio or AC3 (non-audio) is the same thing, 16bit left, 16bit right.
I think the cs46xx HW supports 20 bits resolution, but that's not implemented in the DSP firmware, therefor not supported by the driver (only 16bit stereo).
/Benny
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 3 lines · Benny Sjostrand
Exaclty what do you mean with 32bit spdif ? Sorry, I feel a little bit newbie about
the SPDIF protocol specific details.
Well,
I have just copied an expert, Dr. Werner Fink, as he spoke in the [email protected] mailing list about a problem with AC3overDVB:
"As long as the hardware on the DVB cards are not able to put the 16bit none audio PCM data stream into a 32bit none audio S/P-DIF transport stream all receivers which uses the bit flags of the S/P-DIF transport stream for identifying none audio loose. All S/P-DIF data get from the DVB card to not have the none audio bit set. AFAIK this is a hardware bug (or better this is the information I've got from TT) ..."
So I guessed if we are some for which the CS46xx driver don't work with our receivers with the same sympton (here from the readme of AC3overDVB:
"If your receiver doesn't detect the encapsulated stream (at the beginning of replay in general) you will hear the digital data played as PCM data. It's a spiky noise. Don't turn up the volume too much, or the speakers may be damaged. You have been warned!").
Quoted 7 lines
From the cs46xx driver point of view, 48khz 16bit audio or AC3 (non-audio) is the
same thing, 16bit left, 16bit right.
I think the cs46xx HW supports 20 bits resolution, but that's not implemented
in the DSP firmware, therefor not supported by the driver (only 16bit stereo).
Well, I can't speake from the driver point of view, but with the hardware it is working, at least under windows... Maybe Dr. Werner Fink could clarify the situation?
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 22 lines · Gregoire Favre
Quoted 4 lines · Benny Sjostrand
Exaclty what do you mean with 32bit spdif ? Sorry, I feel a little bit newbie about the SPDIF protocol specific details.
Well,
I have just copied an expert, Dr. Werner Fink, as he spoke in the [email protected] mailing list about a problem with AC3overDVB:
"As long as the hardware on the DVB cards are not able to put the 16bit none audio PCM data stream into a 32bit none audio S/P-DIF transport stream all receivers which uses the bit flags of the S/P-DIF transport stream for identifying none audio loose. All S/P-DIF data get from the DVB card to not have the none audio bit set. AFAIK this is a hardware bug (or better this is the information I've got from TT) ..."
Quoted 9 lines
So I guessed if we are some for which the CS46xx driver don't work with our receivers with the same sympton (here from the readme of AC3overDVB:
"If your receiver doesn't detect the encapsulated stream (at the beginning of replay in general) you will hear the digital data played as PCM data. It's a spiky noise. Don't turn up the volume too much, or the speakers may be damaged. You have been warned!").
Maybe I can try to clarify things a bit.
SPDIF uses 32bits to carry info bits and the audio data. This 32bits is called a frame.
The audio data can be anything up to 24 bits, and then the rest are the info bits (Like Copy-Protect, Non-audio etc.) .
Most computer audio cards hold the info bits in a single register and automatically fill in each frame's info bits using the contents of the register.
This leaves the other audio data to be filled by the PCM stream.
Most audio cards only support 16 bits, and very few support 24 bits, and virtually none support access to all 32 bits.
So, "iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2" sets the info bits register, with the audio data coming from the PCM.
For AC3 non-audio spdif, it uses only 16 bits, so we have no problem.
The real problem with AC3 via SPDIF on computer sound cards is the sample rate.
A lot of audio cards can only do SPDIF non-audio data at 48khz.
Your sample is requesting 44.1khz which could be the problem.
I do not know if your audio card support 44.1khz non-audio spdif. My SB Live definitely does not. My SB Live can output standard PCM data at different SPDIF rates, but it does re-sampling in hardware. If I wish to bypass the re-sampling hardware (bypass needed otherwise the non-audio data gets mangled) in my SB Live I have to use 48khz.
A good source of 48 khz non-audio AC3 sound is playing DVDs.
I know xine handles SPDIF passthru of AC3 soundtracks on DVDs quite easily. At least this will test if the problem is 48/44.1 khz or something else.
Cheers
James
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 2 lines · James Courtier-Dutton
I know xine handles SPDIF passthru of AC3 soundtracks on DVDs quite easily. At least this will test if the problem is 48/44.1 khz or something else.
With xine, all I can manage is 2.0 just like with ac3dec, ac3play. Or clicking sound...
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb:
Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 3 lines
A lot of audio cards can only do SPDIF non-audio data at 48khz.
Your sample is requesting 44.1khz which could be the problem.
I do not know if your audio card support 44.1khz non-audio spdif. My SB Live definitely does not. My SB Live can output standard PCM data at different SPDIF rates, but it does re-sampling in hardware. If I wish to bypass the re-sampling hardware (bypass needed otherwise the non-audio data gets mangled) in my SB Live I have to use 48khz.
non-audio SPDIF on 44.1 khz with the cs46xx driver will definitely not work.
Theoretically SPDIF HW supports 32khz 48khz and 96khz (not 44.1khz) but 32 khz and 96khz rates are not supported by the driver.
So, the SPDIF output is always 48khz, any other rate the DSP will do a sample rate conversion to 48 khz, which is fine while it's audio (PCM) So, outputing sound with 48khz 16bit the DSP wont do any kind of procesing to the samples, which is the only case where pass-through can work.
Quoted 4 lines
A good source of 48 khz non-audio AC3 sound is playing DVDs.
I know xine handles SPDIF passthru of AC3 soundtracks on DVDs quite easily. At least this will test if the problem is 48/44.1 khz or something else.
All tests I've done with xine it always output the AC3 data on 48khz, which should work fine.
/Benny
-------------------------------------------------------
This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server
http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
Quoted 2 lines · Benny Sjostrand
All tests I've done with xine it always output the AC3 data on 48khz, which should work fine.
Well, maybe with your receiver you are lucky... we have seen those days in this ml quiete a few people for which it doesn't work with there receivers.
And as for me it works under windows, I think there is a problem in the software.
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
At Wed, 9 Apr 2003 10:28:15 +0200,
Quoted 9 lines · Gregoire Favre
Quoted 2 lines · Benny Sjostrand
All tests I've done with xine it always output the AC3 data on 48khz, which should work fine.
Well, maybe with your receiver you are lucky... we have seen those days in this ml quiete a few people for which it doesn't work with there receivers.
i can hear ac3 5.1 output over spdif with a terratec xfire 1024 without problems. i guess it's not the choice of receiver but the card itself. there are differences between the cards even with the same cs46xx chip depending on the hardware implementation.
Quoted 2 lines
And as for me it works under windows, I think there is a problem in the software.
yes it should be a driver bug.
but note that without the real (problematic) hardware, it's difficult to check (especially if the system of developers do really work :) ...
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 4 lines · Takashi Iwai
i can hear ac3 5.1 output over spdif with a terratec xfire 1024 without problems. i guess it's not the choice of receiver but the card itself. there are differences between the cards even with the same cs46xx chip depending on the hardware implementation.
Well, I can't speak about ALSA, but for DVB card, it only works with receivers that detect the encapsulated stream (a lots of DVB users have tested different receivers).
So I ask if it's really not a problem with some receivers here too... When I plug my 5.1 to my standalone DVD player, I have two choice:
* SPDIF/RAW
* SPDIF/PCM
And if I choose SPDIF/PCM it don't work, but SPDIF/RAW works perfectly.
Quoted 3 lines
yes it should be a driver bug.
but note that without the real (problematic) hardware, it's difficult to check (especially if the system of developers do really work :) ...
So I only have the choice to change either the card, or my receier...
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
At Wed, 9 Apr 2003 13:43:12 +0200,
Quoted 14 lines · Gregoire Favre
Quoted 4 lines · Takashi Iwai
i can hear ac3 5.1 output over spdif with a terratec xfire 1024 without problems. i guess it's not the choice of receiver but the card itself. there are differences between the cards even with the same cs46xx chip depending on the hardware implementation.
Well, I can't speak about ALSA, but for DVB card, it only works with receivers that detect the encapsulated stream (a lots of DVB users have tested different receivers).
So I ask if it's really not a problem with some receivers here too... When I plug my 5.1 to my standalone DVD player, I have two choice:
Quoted 4 lines
* SPDIF/RAW
* SPDIF/PCMAnd if I choose SPDIF/PCM it don't work, but SPDIF/RAW works perfectly.
hmm, then your receiver needs explicitly the non-audio bit. i guess that my receiver reads the signature bytes for each spdif frame. i tested 44.1kHZ ac3 from diatons, and it works on mine.
Quoted 5 lines
Quoted 3 lines
yes it should be a driver bug.
but note that without the real (problematic) hardware, it's difficult to check (especially if the system of developers do really work :) ...So I only have the choice to change either the card, or my receier...
before giving up: could you try the attached patch (to cvs version)?
Takashi
Quoted 1 line · Takashi Iwai
before giving up: could you try the attached patch (to cvs version)?
I'll test any patch with a great pleasure :-)
Unfortunately with this one, I still get clicking sounds...
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Gregoire,
You say that in windows SPDIF works fine and you get the AC3 decoded by your external decoder. Does the decoder have any indicators telling you whether it is an AC3 of PCM stream ?
So, in linux, when playing a DVD in PASSTHRU mode in xine, does your decoder think it is AC3 or PCM ?
If the decoder still thinks it is PCM, then the problem is a bug in the alsa-driver, and not the application or sample rate. If the decoder thinks it is AC3, then we can look at different problems, like hardware-resamplers in the way.
Cheers
James
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
On Thu, Apr 10, 2003 at 12:21:38PM +0100, James Courtier-Dutton wrote:
Hello James and others ;-)
Quoted 4 lines
You say that in windows SPDIF works fine and you get the AC3 decoded by your external decoder.
Does the decoder have any indicators telling you whether it is an AC3 of PCM stream ?
Yes (well, I have an indicator of Dolby Digital).
Quoted 2 lines
So, in linux, when playing a DVD in PASSTHRU mode in xine, does your decoder think it is AC3 or PCM ?
PCM...
Quoted 2 lines
If the decoder still thinks it is PCM, then the problem is a bug in the alsa-driver, and not the application or sample rate.
I think it's something I have tried to explain here ;-)
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 14 lines
Yes (well, I have an indicator of Dolby Digital).
Quoted 3 lines
So, in linux, when playing a DVD in PASSTHRU mode in xine, does your decoder think it is AC3 or PCM ?
PCM...
Quoted 8 lines
Quoted 3 lines
If the decoder still thinks it is PCM, then the problem is a bug in the alsa-driver, and not the application or sample rate.
I think it's something I have tried to explain here ;-)
Well, something must be wrong with the cs46xx driver. It's hard to know what when it's works fine with my receiver. A explication to that could be that my receiver ignores the IEC958 status bits and detects the AC3 from signatures on the stream.
Gregoire:
Please dont give up yet, could you test the atached patch to current CVS.
Then test out different values on the "AES0=0x0,AES1=0x82,AES2=0x0,AES3=0x2" parameters like:
"AES0=0x2,AES1=0x0,AES2=0x82,AES3=0x0", "AES0=0xFF,AES1=0xFF,AES2=0xFF,AES3=0xFF", "AES0=0x00,AES1=0x00,AES2=0x00,AES3=0x00" (and any other
values that cames into your mind ... )
/Benny
cvs/alsa-kernel/pci/cs46xx/cs46xx_lib.c renamed from pci/cs46xx/cs46xx_lib.c +25 -17
@@ -2091,10 +2091,10 @@dsp_spos_instance_t * ins = chip->dsp_spos_instance;down (&chip->spos_mutex); - ucontrol->value.iec958.status[0 ] =_wrap_all_bits ((ins->spdif_csuv_default >>24 ) &0xff ); - ucontrol->value.iec958.status[1 ] =_wrap_all_bits ((ins->spdif_csuv_default >>16 ) &0xff ); - ucontrol->value.iec958.status[2 ] =0 ; - ucontrol->value.iec958.status[3 ] =_wrap_all_bits ((ins->spdif_csuv_default) &0xff ); + ucontrol->value.iec958.status[0 ] = ins->spdif_csuv_default &0xff ; + ucontrol->value.iec958.status[1 ] =0 ; + ucontrol->value.iec958.status[2 ] = (ins->spdif_csuv_default >>16 ) &0xff ; + ucontrol->value.iec958.status[3 ] = (ins->spdif_csuv_default >>24 ) &0xff ;up (&chip->spos_mutex);return 0 ;
@@ -2109,9 +2109,9 @@int change;down (&chip->spos_mutex); - val =_wrap_all_bits (((u32 )ucontrol->value.iec958.status[0 ] <<24 )) | -_wrap_all_bits (((u32 )ucontrol->value.iec958.status[2 ] <<16 )) | -_wrap_all_bits ( (u32 )ucontrol->value.iec958.status[3 ]) | + val = (u32 )ucontrol->value.iec958.status[0 ] | + ((u32 )ucontrol->value.iec958.status[2 ] <<16 ) | + ((u32 )ucontrol->value.iec958.status[3 ] <<24 ) |/* left and right validity bit */ (1 <<13 ) | (1 <<12 );
@@ -2131,8 +2131,8 @@ snd_ctl_elem_value_t * ucontrol) { ucontrol->value.iec958.status[0 ] =0xff ; - ucontrol->value.iec958.status[1 ] =0xff ; - ucontrol->value.iec958.status[2 ] =0x00 ; + ucontrol->value.iec958.status[1 ] =0x00 ; + ucontrol->value.iec958.status[2 ] =0xff ; ucontrol->value.iec958.status[3 ] =0xff ;return 0 ; }
@@ -2144,10 +2144,10 @@dsp_spos_instance_t * ins = chip->dsp_spos_instance;down (&chip->spos_mutex); - ucontrol->value.iec958.status[0 ] =_wrap_all_bits ((ins->spdif_csuv_stream >>24 ) &0xff ); - ucontrol->value.iec958.status[1 ] =_wrap_all_bits ((ins->spdif_csuv_stream >>16 ) &0xff ); - ucontrol->value.iec958.status[2 ] =0 ; - ucontrol->value.iec958.status[3 ] =_wrap_all_bits ((ins->spdif_csuv_stream) &0xff ); + ucontrol->value.iec958.status[0 ] = ins->spdif_csuv_stream &0xff ; + ucontrol->value.iec958.status[1 ] =0 ; + ucontrol->value.iec958.status[2 ] = (ins->spdif_csuv_stream >>16 ) &0xff ; + ucontrol->value.iec958.status[3 ] = (ins->spdif_csuv_stream >>24 ) &0xff ;up (&chip->spos_mutex);return 0 ;
@@ -2162,9 +2162,9 @@int change;down (&chip->spos_mutex); - val =_wrap_all_bits (((u32 )ucontrol->value.iec958.status[0 ] <<24 )) | -_wrap_all_bits (((u32 )ucontrol->value.iec958.status[1 ] <<16 )) | -_wrap_all_bits ( (u32 )ucontrol->value.iec958.status[3 ]) | + val = (u32 )ucontrol->value.iec958.status[0 ] | + ((u32 )ucontrol->value.iec958.status[2 ] <<16 ) | + ((u32 )ucontrol->value.iec958.status[3 ] <<24 ) |/* left and right validity bit */ (1 <<13 ) | (1 <<12 );
@@ -2543,13 +2543,21 @@ chip->eapd_switch =snd_ctl_find_id (chip->card, &id);#ifdef CONFIG_SND_CS46XX_NEW_DSP +if (chip->nr_ac97_codecs ==1 && +snd_cs46xx_codec_read (chip,AC97_VENDOR_ID2 , +CS46XX_PRIMARY_CODEC_INDEX ) ==0x5d2d ) { +/* set primary cs4294 codec into Extended Audio Mode */ +snd_printdd ("setting EAM bit on cs4294 CODEC\n" ); +snd_cs46xx_codec_write (chip,AC97_CSR_ACMODE ,0x200 , +CS46XX_PRIMARY_CODEC_INDEX ); + }/* do soundcard specific mixer setup */ if (chip->mixer_init) {snd_printdd ("calling chip->mixer_init(chip);\n" ); chip->mixer_init (chip); }#endif - +/* turn on amplifier */ chip->amplifier_ctrl (chip,1 );
cvs/alsa-kernel/pci/cs46xx/dsp_spos.c renamed from pci/cs46xx/dsp_spos.c +2 -6
@@ -265,12 +265,8 @@/* set left and right validity bits and default channel status */ - ins->spdif_csuv_default = - ins->spdif_csuv_stream = -/* byte 0 */ (_wrap_all_bits ( (SNDRV_PCM_DEFAULT_CON_SPDIF &0xff )) <<24 ) | -/* byte 1 */ (_wrap_all_bits ( ((SNDRV_PCM_DEFAULT_CON_SPDIF >>16 ) &0xff )) <<16 ) | -/* byte 3 */ _wrap_all_bits ( (SNDRV_PCM_DEFAULT_CON_SPDIF >>24 ) &0xff ) | -/* left and right validity bits */ (1 <<13 ) | (1 <<12 ); + ins->spdif_csuv_default = (SNDRV_PCM_DEFAULT_CON_SPDIF &0xff00ffff ) | +/* left and right validity bits */ (1 <<13 ) | (1 <<12 );return ins; }
cvs/alsa-kernel/pci/cs46xx/dsp_spos.h renamed from pci/cs46xx/dsp_spos.h +0 -19
@@ -186,25 +186,6 @@#define SP_SPDOUT_CONTROL 0x804D#define SP_SPDOUT_CSUV 0x808E -static inline u8 _wrap_all_bits (u8 val) { -u8 wrapped; - -/* wrap all 8 bits */ - wrapped = - ((val &0x1 ) <<7 ) | - ((val &0x2 ) <<5 ) | - ((val &0x4 ) <<3 ) | - ((val &0x8 ) <<1 ) | - ((val &0x10 ) >>1 ) | - ((val &0x20 ) >>3 ) | - ((val &0x40 ) >>5 ) | - ((val &0x80 ) >>7 ); - -return wrapped; - -} - -static inline void cs46xx_dsp_spos_update_scb (cs46xx_t * chip,dsp_scb_descriptor_t * scb) {/* update nextSCB and subListPtr in SCB */
Quoted 8 lines · Benny Sjostrand
Gregoire:
Please dont give up yet, could you test the atached patch to current CVS. Then test out different values on the "AES0=0x0,AES1=0x82,AES2=0x0,AES3=0x2" parameters like:
"AES0=0x2,AES1=0x0,AES2=0x82,AES3=0x0", "AES0=0xFF,AES1=0xFF,AES2=0xFF,AES3=0xFF", "AES0=0x00,AES1=0x00,AES2=0x00,AES3=0x00" (and any other values that cames into your mind ... )
Hello,
I'll test as many patches as you'll write ;-)
I have patched my CVS with your patch, then made a ./cvscompile --with-sequencer=yes --with-cards=cs46xx --with-isapnp=no and sudo make install
And afterthat as root a /etc/init.d/alsasound restart Then a lots of
ac3dec file.ac3 --device=iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2 5.1 Mode 44.1 KHz 256 kbps Complete Main Audio Service Using PCM device 'iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2'
All are playing the file in 2.0 mode, and all test I have done with xine don't work neither...
Same problem with mplayer (xine and mplayer: either no sound or just the clicking sound).
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 7 lines
I have patched my CVS with your patch, then made a ./cvscompile --with-sequencer=yes --with-cards=cs46xx --with-isapnp=no and sudo make install
Could you recompile with "--with-debug=detect" and try send my some logs while you doing your tests ?
/Benny
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 2 lines · Benny Sjostrand
Could you recompile with "--with-debug=detect" and try send my some logs while you doing your tests ?
I have done it privately, if someone also want the log, just tell me ;-)
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 5 lines
I have done it privately, if someone also want the log, just tell me ;-)
Could you repeat the tests with the attached patch applied to current CVS. The only changes are some more debug messages.
Just to check, which version of xine ? (I'm using 0.9.18)
"Lord Of the Rings" DTS and Surround 5.1, and "Star Wars II" Surrund 5.1 works fine forme.
Thanks!
/Benny
cvs/alsa-kernel/pci/cs46xx/cs46xx_lib.c renamed from pci/cs46xx/cs46xx_lib.c +32 -19
@@ -2091,10 +2091,10 @@dsp_spos_instance_t * ins = chip->dsp_spos_instance;down (&chip->spos_mutex); - ucontrol->value.iec958.status[0 ] =_wrap_all_bits ((ins->spdif_csuv_default >>24 ) &0xff ); - ucontrol->value.iec958.status[1 ] =_wrap_all_bits ((ins->spdif_csuv_default >>16 ) &0xff ); - ucontrol->value.iec958.status[2 ] =0 ; - ucontrol->value.iec958.status[3 ] =_wrap_all_bits ((ins->spdif_csuv_default) &0xff ); + ucontrol->value.iec958.status[0 ] = ins->spdif_csuv_default &0xff ; + ucontrol->value.iec958.status[1 ] =0 ; + ucontrol->value.iec958.status[2 ] = (ins->spdif_csuv_default >>16 ) &0xff ; + ucontrol->value.iec958.status[3 ] = (ins->spdif_csuv_default >>24 ) &0xff ;up (&chip->spos_mutex);return 0 ;
@@ -2109,9 +2109,9 @@int change;down (&chip->spos_mutex); - val =_wrap_all_bits (((u32 )ucontrol->value.iec958.status[0 ] <<24 )) | -_wrap_all_bits (((u32 )ucontrol->value.iec958.status[2 ] <<16 )) | -_wrap_all_bits ( (u32 )ucontrol->value.iec958.status[3 ]) | + val = (u32 )ucontrol->value.iec958.status[0 ] | + ((u32 )ucontrol->value.iec958.status[2 ] <<16 ) | + ((u32 )ucontrol->value.iec958.status[3 ] <<24 ) |/* left and right validity bit */ (1 <<13 ) | (1 <<12 );
@@ -2119,8 +2119,11 @@ change = (unsigned int )ins->spdif_csuv_default != val; ins->spdif_csuv_default = val; -if ( !(ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) ) + +if ( !(ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) ) { +snd_printdd ("setting SP_SPDOUT_CSUV register (%08x)\n" ,val);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV ,val); + }up (&chip->spos_mutex);
@@ -2131,8 +2134,8 @@ snd_ctl_elem_value_t * ucontrol) { ucontrol->value.iec958.status[0 ] =0xff ; - ucontrol->value.iec958.status[1 ] =0xff ; - ucontrol->value.iec958.status[2 ] =0x00 ; + ucontrol->value.iec958.status[1 ] =0x00 ; + ucontrol->value.iec958.status[2 ] =0xff ; ucontrol->value.iec958.status[3 ] =0xff ;return 0 ; }
@@ -2144,10 +2147,10 @@dsp_spos_instance_t * ins = chip->dsp_spos_instance;down (&chip->spos_mutex); - ucontrol->value.iec958.status[0 ] =_wrap_all_bits ((ins->spdif_csuv_stream >>24 ) &0xff ); - ucontrol->value.iec958.status[1 ] =_wrap_all_bits ((ins->spdif_csuv_stream >>16 ) &0xff ); - ucontrol->value.iec958.status[2 ] =0 ; - ucontrol->value.iec958.status[3 ] =_wrap_all_bits ((ins->spdif_csuv_stream) &0xff ); + ucontrol->value.iec958.status[0 ] = ins->spdif_csuv_stream &0xff ; + ucontrol->value.iec958.status[1 ] =0 ; + ucontrol->value.iec958.status[2 ] = (ins->spdif_csuv_stream >>16 ) &0xff ; + ucontrol->value.iec958.status[3 ] = (ins->spdif_csuv_stream >>24 ) &0xff ;up (&chip->spos_mutex);return 0 ;
@@ -2162,9 +2165,9 @@int change;down (&chip->spos_mutex); - val =_wrap_all_bits (((u32 )ucontrol->value.iec958.status[0 ] <<24 )) | -_wrap_all_bits (((u32 )ucontrol->value.iec958.status[1 ] <<16 )) | -_wrap_all_bits ( (u32 )ucontrol->value.iec958.status[3 ]) | + val = (u32 )ucontrol->value.iec958.status[0 ] | + ((u32 )ucontrol->value.iec958.status[2 ] <<16 ) | + ((u32 )ucontrol->value.iec958.status[3 ] <<24 ) |/* left and right validity bit */ (1 <<13 ) | (1 <<12 );
@@ -2172,8 +2175,10 @@ change = ins->spdif_csuv_stream != val; ins->spdif_csuv_stream = val; -if ( ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) +if ( ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) { +snd_printdd ("setting SP_SPDOUT_CSUV register (%08x)\n" ,val);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV ,val); + }up (&chip->spos_mutex);
@@ -2543,13 +2548,21 @@ chip->eapd_switch =snd_ctl_find_id (chip->card, &id);#ifdef CONFIG_SND_CS46XX_NEW_DSP +if (chip->nr_ac97_codecs ==1 && +snd_cs46xx_codec_read (chip,AC97_VENDOR_ID2 , +CS46XX_PRIMARY_CODEC_INDEX ) ==0x5d2d ) { +/* set primary cs4294 codec into Extended Audio Mode */ +snd_printdd ("setting EAM bit on cs4294 CODEC\n" ); +snd_cs46xx_codec_write (chip,AC97_CSR_ACMODE ,0x200 , +CS46XX_PRIMARY_CODEC_INDEX ); + }/* do soundcard specific mixer setup */ if (chip->mixer_init) {snd_printdd ("calling chip->mixer_init(chip);\n" ); chip->mixer_init (chip); }#endif - +/* turn on amplifier */ chip->amplifier_ctrl (chip,1 );
cvs/alsa-kernel/pci/cs46xx/dsp_spos.c renamed from pci/cs46xx/dsp_spos.c +3 -6
@@ -265,12 +265,8 @@/* set left and right validity bits and default channel status */ - ins->spdif_csuv_default = - ins->spdif_csuv_stream = -/* byte 0 */ (_wrap_all_bits ( (SNDRV_PCM_DEFAULT_CON_SPDIF &0xff )) <<24 ) | -/* byte 1 */ (_wrap_all_bits ( ((SNDRV_PCM_DEFAULT_CON_SPDIF >>16 ) &0xff )) <<16 ) | -/* byte 3 */ _wrap_all_bits ( (SNDRV_PCM_DEFAULT_CON_SPDIF >>24 ) &0xff ) | -/* left and right validity bits */ (1 <<13 ) | (1 <<12 ); + ins->spdif_csuv_default = (SNDRV_PCM_DEFAULT_CON_SPDIF &0xffff00ff ) | +/* left and right validity bits */ (1 <<13 ) | (1 <<12 );return ins; }
@@ -1655,6 +1651,7 @@cs46xx_poke_via_dsp (chip,SP_SPDOUT_CONTROL ,0x80000000 );/* right and left validate bit */ +snd_printdd ("setting SP_SPDOUT_CSUV register to default (%08x)\n" ,ins->spdif_csuv_default);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV , ins->spdif_csuv_default);/* monitor state */
cvs/alsa-kernel/pci/cs46xx/dsp_spos.h renamed from pci/cs46xx/dsp_spos.h +0 -19
@@ -186,25 +186,6 @@#define SP_SPDOUT_CONTROL 0x804D#define SP_SPDOUT_CSUV 0x808E -static inline u8 _wrap_all_bits (u8 val) { -u8 wrapped; - -/* wrap all 8 bits */ - wrapped = - ((val &0x1 ) <<7 ) | - ((val &0x2 ) <<5 ) | - ((val &0x4 ) <<3 ) | - ((val &0x8 ) <<1 ) | - ((val &0x10 ) >>1 ) | - ((val &0x20 ) >>3 ) | - ((val &0x40 ) >>5 ) | - ((val &0x80 ) >>7 ); - -return wrapped; - -} - -static inline void cs46xx_dsp_spos_update_scb (cs46xx_t * chip,dsp_scb_descriptor_t * scb) {/* update nextSCB and subListPtr in SCB */
cvs/alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c renamed from pci/cs46xx/dsp_spos_scb_lib.c +2 -0
@@ -1701,6 +1701,7 @@/* set spdif channel status value for streaming */ +snd_printdd ("setting SP_SPDOUT_CSUV register to stream (%08x)\n" ,ins->spdif_csuv_stream);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV , ins->spdif_csuv_stream); ins->spdif_status_out |=DSP_SPDIF_STATUS_PLAYBACK_OPEN ;
@@ -1717,6 +1718,7 @@ ins->spdif_status_out &= ~DSP_SPDIF_STATUS_PLAYBACK_OPEN ;/* restore settings */ +snd_printdd ("setting SP_SPDOUT_CSUV register to default (%08x)\n" ,ins->spdif_csuv_default);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV , ins->spdif_csuv_default);/* deallocate stuff */
Quoted 2 lines · Benny Sjostrand
Could you repeat the tests with the attached patch applied to current CVS. The only changes are some more debug messages.
Yes, sure!!!
Quoted 1 line
Just to check, which version of xine ? (I'm using 0.9.18)
0.9.20 with lots of different DVD tested...
Quoted 2 lines
"Lord Of the Rings" DTS and Surround 5.1, and "Star Wars II" Surrund 5.1 works fine forme.
So, I'll take Star Wars II for my new test ;-)
I just gives here the commands and the output from dmesg...
Reloading the modules:
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing nullSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing TimingMasterSCBInst ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing CodecOutSCB_I ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing MasterMixSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing CodecInSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing WriteBackSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing VariDecimateSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing RecordMixerSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing CodecOutSCB_Rear ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing RearMixerSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing CodecOutSCB_CLFE ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing CLFEMixerSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing MagicSnoopSCB_I ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SPIOWriteSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SrcTaskSCB_SPDIFI ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SPDIFOSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SPDIFISCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynCodecInputSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMSerialInput_II ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2458: snd_cs46xx: detecting primary codec
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2408: cs46xx: CODOEC1 mode 0000
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2482: snd_cs46xx: primary codec phase one
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2486: snd_cs46xx: detecting seconadry codec
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2411: cs46xx: CODOEC2 mode 0003
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:314: dsp_spos: loading module cwc4630 into DSP
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:317: dsp_spos: clearing parameter area
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:332: dsp_spos: downloading parameter data to chip (00000000-00000200) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:341: dsp_spos: clearing sample area
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:346: dsp_spos: module got no sample segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:366: dsp_spos: clearing code area
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:392: dsp_spos: downloading code to chip (00020000-00020ca0) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:111: dsp_spos: 0 instructions reallocated
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:314: dsp_spos: loading module cwcasync into DSP
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:322: dsp_spos: module got no parameter segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:346: dsp_spos: module got no sample segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:392: dsp_spos: downloading code to chip (00020ca0-00021378) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:02731 addr 8000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:02731 addr 8000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01000:60630 addr 000c
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100d:00630 addr 01a0
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01000:20630 addr 0004
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100c:c0630 addr 0198
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:42730 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:42730 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01000:f0630 addr 001e
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100d:90630 addr 01b2
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01000:e00f2 addr 001c
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100d:800f2 addr 01b0
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01001:e8030 addr 003d
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100e:88030 addr 01d1
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01001:82630 addr 0030
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100e:22630 addr 01c4
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01001:504a0 addr 002a
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100d:f04a0 addr 01be
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01001:e8630 addr 003d
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100e:88630 addr 01d1
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01001:d84a0 addr 003b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100e:784a0 addr 01cf
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01002:b8630 addr 0057
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100f:58630 addr 01eb
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01002:ac0f2 addr 0055
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 0100f:4c0f2 addr 01e9
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01003:ac030 addr 0075
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01010:4c030 addr 0209
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01003:884a0 addr 0071
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01010:284a0 addr 0205
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01003:706b0 addr 006e
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01010:106b0 addr 0202
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01003:78730 addr 006f
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01010:18730 addr 0203
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01004:8c030 addr 0091
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01011:2c030 addr 0225
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01004:704a0 addr 008e
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01011:104a0 addr 0222
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:02731 addr 8000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:02731 addr 8000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01005:64630 addr 00ac
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01012:04630 addr 0240
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01005:746b0 addr 00ae
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01012:146b0 addr 0242
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:40630 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:40630 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01005:d86a0 addr 00bb
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01012:786a0 addr 024f
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:42730 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:42730 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01006:60630 addr 00cc
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01013:00630 addr 0260
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:586b0 addr 800b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:586b0 addr 800b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:500b0 addr 800a
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:500b0 addr 800a
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:40730 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:40730 addr 8008
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:111: dsp_spos: 29 instructions reallocated
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:314: dsp_spos: loading module cwcsnoop into DSP
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:322: dsp_spos: module got no parameter segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:346: dsp_spos: module got no sample segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:392: dsp_spos: downloading code to chip (00021378-00021470) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01028:80630 addr 0510
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01013:f8630 addr 027f
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01028:a83a0 addr 0515
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01014:203a0 addr 0284
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01028:d8730 addr 051b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01014:50730 addr 028a
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:111: dsp_spos: 3 instructions reallocated
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:314: dsp_spos: loading module cwcbinhack into DSP ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:322: dsp_spos: module got no parameter segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:346: dsp_spos: module got no sample segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:392: dsp_spos: downloading code to chip (00021470-00021570) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01016:b8630 addr 02d7
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01014:e8630 addr 029d
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01016:e03a0 addr 02dc
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01015:103a0 addr 02a2
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01017:10730 addr 02e2
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01015:40730 addr 02a8
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:111: dsp_spos: 3 instructions reallocated
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:314: dsp_spos: loading module cwcdma into DSP
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:322: dsp_spos: module got no parameter segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:346: dsp_spos: module got no sample segment
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:392: dsp_spos: downloading code to chip (00021570-00021630) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:02731 addr 8000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:02731 addr 8000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:58630 addr 800b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:58630 addr 800b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01000:902a0 addr 0012
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01016:002a0 addr 02c0
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:83: handle_wideop[1]: 01400:58730 addr 800b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:88: handle_wideop[1]: ROM symbol not reallocated ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:100: handle_wideop:[2] 01400:58730 addr 800b
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:111: dsp_spos: 4 instructions reallocated
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <TimingMasterSCBInst> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <CodecOutSCB_I> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <MasterMixSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <CodecInSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <WriteBackSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <VariDecimateSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <RecordMixerSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <CodecOutSCB_Rear> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <RearMixerSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <CodecOutSCB_CLFE> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <CLFEMixerSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <MagicSnoopSCB_I> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SPIOWriteSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597: dsp_spos: setting SrcTaskSCB_SPDIFI rate to 48000 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SrcTaskSCB_SPDIFI> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos.c:1654: setting SP_SPDOUT_CSUV register to default (02003000) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMSerialInput_II> ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2124: setting SP_SPDOUT_CSUV register (02003000)
ac3dec from_beyond_the_edge_44k_256kbps.ac3 --device=iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2 5.1 Mode 44.1 KHz 256 kbps Complete Main Audio Service
Using PCM device 'iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2'
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1441: open raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMSerialInput_II ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1704: setting SP_SPDOUT_CSUV register to stream (00003087) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1241: IEC958 pass through
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1306: dsp_spos: creating SRC "SrcTask_SCB0" ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597: dsp_spos: setting SrcTask_SCB0 rate to 48000 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SrcTask_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1331: dsp_spos: creating PCM "PCMReader_SCB0" (5) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMReader_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1001: period_size (2048), periods (32) buffer_size(65536) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02003002) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (00003087) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1457: close raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMReader_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SrcTask_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1721: setting SP_SPDOUT_CSUV register to default (02003000) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMSerialInput_II>
Switching to a channel broadcasting ac3 (not always 5.1):
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1441: open raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMSerialInput_II
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB>
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1704: setting SP_SPDOUT_CSUV register to stream (00003087)
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1241: IEC958 pass through
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1306: dsp_spos: creating SRC "SrcTask_SCB0"
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597: dsp_spos: setting SrcTask_SCB0 rate to 48000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SrcTask_SCB0>
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1331: dsp_spos: creating PCM "PCMReader_SCB0" (5)
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMReader_SCB0>
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1001: period_size (1024), periods (60) buffer_size(61440)
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02003002)
ALSA ../alsa-kernel/core/pcm_lib.c:156: Unexpected hw_pointer value (stream = 0, delta: -256, max jitter = 7680): wrong interrupt acknowledge?
Running xine (StarWars II) I can't access this DVD really well:
xine hangs on audio menu (I was still on the ac3 channels)
ALSA ../alsa-kernel/core/pcm_lib.c:156: Unexpected hw_pointer value (stream = 0, delta: -256, max jitter = 7680): wrong interrupt acknowledge? ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1418: open front channel
ALSA ../alsa-kernel/core/pcm_lib.c:156: Unexpected hw_pointer value (stream = 0, delta: -256, max jitter = 7680): wrong interrupt acknowledge? ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (00003087)
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1457: close raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMReader_SCB0
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SrcTask_SCB0
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1721: setting SP_SPDOUT_CSUV register to default (02003000)
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB>
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMSerialInput_II>
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1441: open raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMSerialInput_II
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB>
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1704: setting SP_SPDOUT_CSUV register to stream (00003087)
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1241: IEC958 pass through
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1306: dsp_spos: creating SRC "SrcTask_SCB0"
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597: dsp_spos: setting SrcTask_SCB0 rate to 48000
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SrcTask_SCB0>
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1331: dsp_spos: creating PCM "PCMReader_SCB0" (5)
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMReader_SCB0>
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1001: period_size (2048), periods (32) buffer_size(65536)
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02003006)
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1457: close raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMReader_SCB0
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SrcTask_SCB0
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1721: setting SP_SPDOUT_CSUV register to default (02003000)
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB>
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMSerialInput_II>
Retry of xine without the ac3 channel on VDR (with bitstreamout plugin) this time I can choose french language and begin to play the movie (I don't hear anything):
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1418: open front channel
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1441: open raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMSerialInput_II ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1704: setting SP_SPDOUT_CSUV register to stream (02003006) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1241: IEC958 pass through
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1306: dsp_spos: creating SRC "SrcTask_SCB0" ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597: dsp_spos: setting SrcTask_SCB0 rate to 48000 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SrcTask_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1331: dsp_spos: creating PCM "PCMReader_SCB0" (5) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMReader_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1001: period_size (2048), periods (32) buffer_size(65536) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02003006) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02003006) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1457: close raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMReader_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SrcTask_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1721: setting SP_SPDOUT_CSUV register to default (02003000) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMSerialInput_II>
Should I test some other things?
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 5 lines
0.9.20 with lots of different DVD tested...
Well, I supose I should upgrade -;)
Quoted 3 lines
So, I'll take Star Wars II for my new test ;-)
Just in case that something differs between DVD's, you never know ... (but probably dont care at all)
Quoted 5 lines
ac3dec from_beyond_the_edge_44k_256kbps.ac3 --device=iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2 5.1 Mode 44.1 KHz 256 kbps Complete Main Audio Service
Using PCM device 'iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2'
So lets try changing thoose values to:
AES0=0x2,AES1=0x0,AES2=0x82,AE3=0x2
Quoted 10 lines
ALSA
../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1241: IEC958 pass through
ALSA../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1306:dsp_spos: creating SRC "SrcTask_SCB0" ALSA../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597:dsp_spos: settingSrcTask_SCB0rate to 48000 ALSA../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290:dsp_spos: creating SCB <SrcTask_SCB0> ALSA../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1331:dsp_spos: creating PCM "PCMReader_SCB0" (5) ALSA../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290:dsp_spos: creating SCB <PCMReader_SCB0> ALSA../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1001:period_size(2048), periods (32)buffer_size(65536)ALSA../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: settingSP_SPDOUT_CSUVregister (02003002) ALSA../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: settingSP_SPDOUT_CSUVregister (00003087)
Last value look's complety wrong (00003087), and (02003002) is suspect, ... (probably my fault ...)
Quoted 4 lines
Thank you very much,
You're welcome!
Could you just test the new AES0-3.... values, and sendme the logs again. (check the SP_SPDOUT_CSUV in logs outputs, i would like it to have 0x02820302 value)
/Benny
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 1 line · Benny Sjostrand
Well, I supose I should upgrade -;)
Or me downgrade as it works for you :-)
Quoted 2 lines
So lets try changing thoose values to:
AES0=0x2,AES1=0x0,AES2=0x82,AE3=0x2
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1441: open raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMSerialInput_II ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1704: setting SP_SPDOUT_CSUV register to stream (02003006) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1241: IEC958 pass through
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1306: dsp_spos: creating SRC "SrcTask_SCB0" ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597: dsp_spos: setting SrcTask_SCB0 rate to 48000 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SrcTask_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1331: dsp_spos: creating PCM "PCMReader_SCB0" (5) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMReader_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1001: period_size (2048), periods (32) buffer_size(65536) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02823002) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02003006) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1457: close raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMReader_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SrcTask_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1721: setting SP_SPDOUT_CSUV register to default (02003000) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMSerialInput_II>
Quoted 3 lines
Could you just test the new AES0-3.... values, and sendme the logs again. (check the
SP_SPDOUT_CSUVin logs outputs, i would like it to have0x02820302value)
It's a value I could find, is that good?
I have tried xine with the same iec958:AES0=0x2,AES1=0x0,AES2=0x82,AES3=0x2 value:
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1418: open front channel
ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1441: open raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMSerialInput_II ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1704: setting SP_SPDOUT_CSUV register to stream (02003006) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1241: IEC958 pass through
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1306: dsp_spos: creating SRC "SrcTask_SCB0" ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:597: dsp_spos: setting SrcTask_SCB0 rate to 48000 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <SrcTask_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1331: dsp_spos: creating PCM "PCMReader_SCB0" (5) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMReader_SCB0> ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1001: period_size (2048), periods (32) buffer_size(65536) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02823002) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:2179: setting SP_SPDOUT_CSUV register (02003006) ALSA ../../alsa-kernel/pci/cs46xx/cs46xx_lib.c:1457: close raw iec958 channel
ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing PCMReader_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing SrcTask_SCB0 ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:1721: setting SP_SPDOUT_CSUV register to default (02003000) ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:226: cs46xx_dsp_proc_free_scb_desc: freeing AsynchFGTxSCB ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <AsynchFGTxSCB> ALSA ../../alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c:290: dsp_spos: creating SCB <PCMSerialInput_II>
Have a great day,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 5 lines
It's a value I could find, is that good?
It's what I expected ...
Quoted 4 lines
I have tried xine with the same iec958:AES0=0x2,AES1=0x0,AES2=0x82,AES3=0x2 value:
Let me guess, I did not work ? Well, guess what, I got new "this time hopefully working" patch, so if you like to apply it to CVS and test again -;)
Could you also test with:
AES0=0x40,AES1=0x0,AES2=0x41,AES3=0x40 (all bits wrapped)
Then I got a question about the IEC958 protocoll that hopefulle someone on this list knows something about. The Left and Right validity bits, and Left, Right user bits, what are suposed to do ?? are they suposed to be 1 or 0 when outputing AC3/DTS ???
That could be a posible source of the problem, in this patch they are all turned off.
/Benny
cvs/alsa-kernel/pci/cs46xx/cs46xx_lib.c renamed from pci/cs46xx/cs46xx_lib.c +33 -20
@@ -2091,10 +2091,10 @@dsp_spos_instance_t * ins = chip->dsp_spos_instance;down (&chip->spos_mutex); - ucontrol->value.iec958.status[0 ] =_wrap_all_bits ((ins->spdif_csuv_default >>24 ) &0xff ); - ucontrol->value.iec958.status[1 ] =_wrap_all_bits ((ins->spdif_csuv_default >>16 ) &0xff ); - ucontrol->value.iec958.status[2 ] =0 ; - ucontrol->value.iec958.status[3 ] =_wrap_all_bits ((ins->spdif_csuv_default) &0xff ); + ucontrol->value.iec958.status[0 ] = ins->spdif_csuv_default &0xff ; + ucontrol->value.iec958.status[1 ] =0 ; + ucontrol->value.iec958.status[2 ] = (ins->spdif_csuv_default >>16 ) &0xff ; + ucontrol->value.iec958.status[3 ] = (ins->spdif_csuv_default >>24 ) &0xff ;up (&chip->spos_mutex);return 0 ;
@@ -2109,9 +2109,9 @@int change;down (&chip->spos_mutex); - val =_wrap_all_bits (((u32 )ucontrol->value.iec958.status[0 ] <<24 )) | -_wrap_all_bits (((u32 )ucontrol->value.iec958.status[2 ] <<16 )) | -_wrap_all_bits ( (u32 )ucontrol->value.iec958.status[3 ]) | + val = (u32 )ucontrol->value.iec958.status[0 ] | + ((u32 )ucontrol->value.iec958.status[1 ] <<16 ) | + ((u32 )ucontrol->value.iec958.status[2 ] <<24 ) |/* left and right validity bit */ (1 <<13 ) | (1 <<12 );
@@ -2119,8 +2119,11 @@ change = (unsigned int )ins->spdif_csuv_default != val; ins->spdif_csuv_default = val; -if ( !(ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) ) + +if ( !(ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) ) { +snd_printdd ("setting SP_SPDOUT_CSUV register (%08x)\n" ,val);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV ,val); + }up (&chip->spos_mutex);
@@ -2131,8 +2134,8 @@ snd_ctl_elem_value_t * ucontrol) { ucontrol->value.iec958.status[0 ] =0xff ; - ucontrol->value.iec958.status[1 ] =0xff ; - ucontrol->value.iec958.status[2 ] =0x00 ; + ucontrol->value.iec958.status[1 ] =0x00 ; + ucontrol->value.iec958.status[2 ] =0xff ; ucontrol->value.iec958.status[3 ] =0xff ;return 0 ; }
@@ -2144,10 +2147,10 @@dsp_spos_instance_t * ins = chip->dsp_spos_instance;down (&chip->spos_mutex); - ucontrol->value.iec958.status[0 ] =_wrap_all_bits ((ins->spdif_csuv_stream >>24 ) &0xff ); - ucontrol->value.iec958.status[1 ] =_wrap_all_bits ((ins->spdif_csuv_stream >>16 ) &0xff ); - ucontrol->value.iec958.status[2 ] =0 ; - ucontrol->value.iec958.status[3 ] =_wrap_all_bits ((ins->spdif_csuv_stream) &0xff ); + ucontrol->value.iec958.status[0 ] = ins->spdif_csuv_stream &0xff ; + ucontrol->value.iec958.status[1 ] =0 ; + ucontrol->value.iec958.status[2 ] = (ins->spdif_csuv_stream >>16 ) &0xff ; + ucontrol->value.iec958.status[3 ] = (ins->spdif_csuv_stream >>24 ) &0xff ;up (&chip->spos_mutex);return 0 ;
@@ -2162,18 +2165,20 @@int change;down (&chip->spos_mutex); - val =_wrap_all_bits (((u32 )ucontrol->value.iec958.status[0 ] <<24 )) | -_wrap_all_bits (((u32 )ucontrol->value.iec958.status[1 ] <<16 )) | -_wrap_all_bits ( (u32 )ucontrol->value.iec958.status[3 ]) | + val = (u32 )ucontrol->value.iec958.status[0 ] | + ((u32 )ucontrol->value.iec958.status[2 ] <<16 ) | + ((u32 )ucontrol->value.iec958.status[3 ] <<24 );/* left and right validity bit */ - (1 <<13 ) | (1 <<12 ); +/* (1 << 13) | (1 << 12); */ change = ins->spdif_csuv_stream != val; ins->spdif_csuv_stream = val; -if ( ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) +if ( ins->spdif_status_out &DSP_SPDIF_STATUS_PLAYBACK_OPEN ) { +snd_printdd ("setting SP_SPDOUT_CSUV register (%08x)\n" ,val);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV ,val); + }up (&chip->spos_mutex);
@@ -2543,13 +2548,21 @@ chip->eapd_switch =snd_ctl_find_id (chip->card, &id);#ifdef CONFIG_SND_CS46XX_NEW_DSP +if (chip->nr_ac97_codecs ==1 && +snd_cs46xx_codec_read (chip,AC97_VENDOR_ID2 , +CS46XX_PRIMARY_CODEC_INDEX ) ==0x5d2d ) { +/* set primary cs4294 codec into Extended Audio Mode */ +snd_printdd ("setting EAM bit on cs4294 CODEC\n" ); +snd_cs46xx_codec_write (chip,AC97_CSR_ACMODE ,0x200 , +CS46XX_PRIMARY_CODEC_INDEX ); + }/* do soundcard specific mixer setup */ if (chip->mixer_init) {snd_printdd ("calling chip->mixer_init(chip);\n" ); chip->mixer_init (chip); }#endif - +/* turn on amplifier */ chip->amplifier_ctrl (chip,1 );
cvs/alsa-kernel/pci/cs46xx/dsp_spos.c renamed from pci/cs46xx/dsp_spos.c +5 -7
@@ -265,13 +265,10 @@/* set left and right validity bits and default channel status */ - ins->spdif_csuv_default = - ins->spdif_csuv_stream = -/* byte 0 */ (_wrap_all_bits ( (SNDRV_PCM_DEFAULT_CON_SPDIF &0xff )) <<24 ) | -/* byte 1 */ (_wrap_all_bits ( ((SNDRV_PCM_DEFAULT_CON_SPDIF >>16 ) &0xff )) <<16 ) | -/* byte 3 */ _wrap_all_bits ( (SNDRV_PCM_DEFAULT_CON_SPDIF >>24 ) &0xff ) | -/* left and right validity bits */ (1 <<13 ) | (1 <<12 ); - + ins->spdif_csuv_default = (SNDRV_PCM_DEFAULT_CON_SPDIF &0xffff00ff ) | +/* left and right validity bits */ (1 <<13 ) | (1 <<12 ); + ins->spdif_csuv_stream = (SNDRV_PCM_DEFAULT_CON_SPDIF &0xffff00ff ) | +/* left and right validity bits */ (1 <<13 ) | (1 <<12 );return ins; }
@@ -1655,6 +1652,7 @@cs46xx_poke_via_dsp (chip,SP_SPDOUT_CONTROL ,0x80000000 );/* right and left validate bit */ +snd_printdd ("setting SP_SPDOUT_CSUV register to default (%08x)\n" ,ins->spdif_csuv_default);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV , ins->spdif_csuv_default);/* monitor state */
cvs/alsa-kernel/pci/cs46xx/dsp_spos.h renamed from pci/cs46xx/dsp_spos.h +0 -19
@@ -186,25 +186,6 @@#define SP_SPDOUT_CONTROL 0x804D#define SP_SPDOUT_CSUV 0x808E -static inline u8 _wrap_all_bits (u8 val) { -u8 wrapped; - -/* wrap all 8 bits */ - wrapped = - ((val &0x1 ) <<7 ) | - ((val &0x2 ) <<5 ) | - ((val &0x4 ) <<3 ) | - ((val &0x8 ) <<1 ) | - ((val &0x10 ) >>1 ) | - ((val &0x20 ) >>3 ) | - ((val &0x40 ) >>5 ) | - ((val &0x80 ) >>7 ); - -return wrapped; - -} - -static inline void cs46xx_dsp_spos_update_scb (cs46xx_t * chip,dsp_scb_descriptor_t * scb) {/* update nextSCB and subListPtr in SCB */
cvs/alsa-kernel/pci/cs46xx/dsp_spos_scb_lib.c renamed from pci/cs46xx/dsp_spos_scb_lib.c +2 -0
@@ -1701,6 +1701,7 @@/* set spdif channel status value for streaming */ +snd_printdd ("setting SP_SPDOUT_CSUV register to stream (%08x)\n" ,ins->spdif_csuv_stream);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV , ins->spdif_csuv_stream); ins->spdif_status_out |=DSP_SPDIF_STATUS_PLAYBACK_OPEN ;
@@ -1717,6 +1718,7 @@ ins->spdif_status_out &= ~DSP_SPDIF_STATUS_PLAYBACK_OPEN ;/* restore settings */ +snd_printdd ("setting SP_SPDOUT_CSUV register to default (%08x)\n" ,ins->spdif_csuv_default);cs46xx_poke_via_dsp (chip,SP_SPDOUT_CSUV , ins->spdif_csuv_default);/* deallocate stuff */
Quoted 3 lines · Benny Sjostrand
Let me guess, I did not work ? Well, guess what, I got new "this time hopefully working" patch,
so if you like to apply it to CVS and test again -;)
Yes, for sure!!!
Quoted 2 lines
Could you also test with:
AES0=0x40,AES1=0x0,AES2=0x41,AES3=0x40 (all bits wrapped)
Unfortunately, it's still not working...
If needed I could still send you all the logs :-)
Quoted 9 lines
Then I got a question about the IEC958 protocoll that hopefulle someone on this list
knows something about. The Left and Right validity bits, and Left, Right user
bits, what are suposed to do ?? are they suposed to be 1 or 0 when outputing AC3/DTS ???That could be a posible source of the problem, in this patch they are all turned off.
I am sure Dr. Werner Fink know the answer of this question ;-)
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 6 lines
Quoted 5 lines
All tests I've done with xine it always output the AC3 data on 48khz, which should work fine.
Quoted 7 lines
Well, maybe with your receiver you are lucky... we have seen those days in this ml quiete a few people for which it doesn't work with there receivers.
And as for me it works under windows, I think there is a problem in the software.
What I meant, if you want to output AC3 on other sample rate's than 48khz it wont with the current cs46xx driver (44.1 khz AC3 wont work).
The cs46xx driver can improved in many ways, I'm trying to the best and work on that. (whenever I got time)
It does not surprise me that it works under Windows, there may be many feutures that works under windows, but not under Linux.
Maybe the Windows driver supports AC3 with other sample rates then 48khz (if that's the case) or maybe there's another problem.
/Benny
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com
Quoted 2 lines · Benny Sjostrand
What I meant, if you want to output AC3 on other sample rate's than 48khz it wont with the current cs46xx driver (44.1 khz AC3 wont work).
Please, ignore this 44.1 khz!!!
I really don't care being able to play those, as I have said many times, all I would like is to play DVD in 5.1 and watch TV in 5.1 also, nothing else ;-)
Quoted 2 lines
The cs46xx driver can improved in many ways, I'm trying to the best and work on that. (whenever I got time)
Thank you very much for that :-)
Quoted 5 lines
It does not surprise me that it works under Windows, there may be many feutures that works under windows, but not under Linux.
Maybe the Windows driver supports AC3 with other sample rates then 48khz (if that's the case) or maybe there's another problem.
What is working under windows, is the DVD ac3 (I have just installed windows to test the compatibility in hardware betweem my soundcard and my receiver).
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com