Can I add the permanent ip address on an interface ?
Hello ,
I used Vmware 4.0 to setup a virtual linux network . I added a new virtual PC and therefore I need to add a NIC on old virtual PC . I setup the ip address of this NIC by using the command :
ip addr add 192..../ 24 dev eth1
but when I restart the computer the ip address of this NIC was not saved . And the tc script I used was not save when I turn off my computer , too .
Could you tell me how can I setup the permanent ip address and permanent tc (qdisc , filter , class) on the interfaces ?
Thanks you very much ,
Ngo Hoang Giang
---------------------------------
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
Quoted 6 lines · ngo giang
Hello ,
I used Vmware 4.0 to setup a virtual linux network . I added a new virtual PC and therefore I need to add a NIC on old virtual PC . I setup the ip address of this NIC by using the command :
Quoted 7 lines
ip addr add 192..../ 24 dev eth1
but when I restart the computer the ip address of this NIC was not saved . And the tc script I used was not save when I turn off my computer , too .
Could you tell me how can I setup the permanent ip address and permanent tc (qdisc , filter , class) on the interfaces ?
No, because this depends on the distribution you use. Plz consult the documentation of your distribution to get the info you need.
Stef
Signature · 6 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/