Skip to contentSkip to conversation

Can I add the permanent ip address on an interface ?

LARTC ngo giang 2 participants 2 messages Nov 24, 2004

lore
Share & tools
lore

ngo giang

author
#0 lore raw

Hello ,

I used Vmware 4.0 to setup a virtual linux network . I added a new virtual PC and therefore I need to add a NIC on old virtual PC . I setup the ip address of this NIC by using the command :

ip addr add 192..../ 24 dev eth1

but when I restart the computer the ip address of this NIC was not saved . And the tc script I used was not save when I turn off my computer , too .

Could you tell me how can I setup the permanent ip address and permanent tc (qdisc , filter , class) on the interfaces ?

Thanks you very much ,

Ngo Hoang Giang

---------------------------------
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.

#1 lore raw
Quoted 6 lines · ngo giang

Hello ,

I used Vmware 4.0 to setup a virtual linux network . I added a new virtual PC and therefore I need to add a NIC on old virtual PC . I setup the ip address of this NIC by using the command :

Quoted 7 lines

ip addr add 192..../ 24 dev eth1

but when I restart the computer the ip address of this NIC was not saved . And the tc script I used was not save when I turn off my computer , too .

Could you tell me how can I setup the permanent ip address and permanent tc (qdisc , filter , class) on the interfaces ?

No, because this depends on the distribution you use. Plz consult the documentation of your distribution to get the info you need.

Stef

Signature · 6 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/