OMAP Consolidate common u-boot.lds to cpu layer.
PATCH 1/6 OMAP Consolidate common u-boot.lds to cpu layer.
The u-boot.lds file is common for all omap boards.
Move a cleaned up version to the cpu layer and add makefile logic to use it.
--- board/omap3/beagle/u-boot.lds | 63 ------------------------------------- board/omap3/evm/u-boot.lds | 63 ------------------------------------- board/omap3/overo/u-boot.lds | 63 ------------------------------------- board/omap3/pandora/u-boot.lds | 63 ------------------------------------- board/omap3/zoom1/u-boot.lds | 63 ------------------------------------- cpu/arm_cortexa8/omap3/config.mk | 2 + cpu/arm_cortexa8/omap3/u-boot.lds | 58 ++++++++++++++++++++++++++++++++++ 7 files changed, 60 insertions(+), 315 deletions(-) delete mode 100644 board/omap3/beagle/u-boot.lds delete mode 100644 board/omap3/evm/u-boot.lds delete mode 100644 board/omap3/overo/u-boot.lds delete mode 100644 board/omap3/pandora/u-boot.lds delete mode 100644 board/omap3/zoom1/u-boot.lds create mode 100644 cpu/arm_cortexa8/omap3/u-boot.lds
board/omap3/beagle/u-boot.lds deleted +0 -63
@@ -1,63 +0,0 @@ -/* - * January 2004 - Changed to support H4 device - * Copyright (c) 2004 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <[email protected]> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - cpu/arm_cortexa8/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } - __exidx_start = .; - .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } - __exidx_end = .; - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) } - _end = .; -}
board/omap3/evm/u-boot.lds deleted +0 -63
63 lines not on this page · raw message
board/omap3/overo/u-boot.lds deleted +0 -63
63 lines not on this page · raw message
board/omap3/pandora/u-boot.lds deleted +0 -63
63 lines not on this page · raw message
board/omap3/zoom1/u-boot.lds deleted +0 -63
63 lines not on this page · raw message
cpu/arm_cortexa8/omap3/config.mk +2 -0
@@ -34,3 +34,5 @@ PLATFORM_CPPFLAGS +=$(call cc-option) PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,\ $(call cc-option,-malignment-traps,)) + +LDSCRIPT := $(SRCTREE)/cpu/arm_cortexa8/omap3/u-boot.lds
cpu/arm_cortexa8/omap3/u-boot.lds new file +58 -0
58 lines not on this page · raw message
Signature · 1 line
1.6.0.5
PATCH 2/6 ZOOM2 Add initial support for Zoom2
Zoom2 is a new board from Texas Instruments and LogicPD
The logicpd web site is a good source for general information on this board. Please start looking here if the below links are broken.
http://www.logicpd.com
This is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
This is the product description web page
http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
This patch provides a zoom2 base target by copying zoom1 and by making some obvious changes.
To configure, run
make omap3_zoom2_config
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/omap3/common/Makefile | 1 + board/omap3/zoom2/Makefile | 49 +++++++++ board/omap3/zoom2/config.mk | 33 ++++++ board/omap3/zoom2/zoom2.c | 76 ++++++++++++++ board/omap3/zoom2/zoom2.h | 149 +++++++++++++++++++++++++++ doc/README.omap3 | 15 +++- include/configs/omap3_zoom2.h | 226 +++++++++++++++++++++++++++++++++++++++++ 10 files changed, 555 insertions(+), 2 deletions(-) create mode 100644 board/omap3/zoom2/Makefile create mode 100644 board/omap3/zoom2/config.mk create mode 100644 board/omap3/zoom2/zoom2.c create mode 100644 board/omap3/zoom2/zoom2.h create mode 100644 include/configs/omap3_zoom2.h
MAINTAINERS +4 -0
@@ -615,6 +615,10 @@ Stelian Pop <[email protected]> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) +Tom Rix <[email protected]> + + omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC) + Stefan Roese <[email protected]> ixdpg425 xscale
MAKEALL +1 -0
@@ -561,6 +561,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_evm \ omap3_pandora \ omap3_zoom1 \ + omap3_zoom2 \ " #########################################################################
Makefile +3 -0
@@ -2983,6 +2983,9 @@ omap3_pandora_config : unconfig omap3_zoom1_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 +omap3_zoom2_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3 + ######################################################################### ## XScale Systems #########################################################################
board/omap3/common/Makefile +1 -0
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o COBJS-$(CONFIG_OMAP3_OVERO) += power.o COBJS-$(CONFIG_OMAP3_PANDORA) += power.o COBJS-$(CONFIG_OMAP3_ZOOM1) += power.o +COBJS-$(CONFIG_OMAP3_ZOOM2) += power.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c)
board/omap3/zoom2/Makefile new file +49 -0
49 lines not on this page · raw message
board/omap3/zoom2/config.mk new file +33 -0
@@ -0,0 +1,33 @@ +# +# (C) Copyright 2009 +# Texas Instruments, <www.ti.com> +# +# Zoom II uses OMAP3 (ARM-CortexA8) CPU +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 0x80000000 (bank0) +# 0xA0000000 (bank1) +# Linux-Kernel is expected to be at 0x80008000, entry 0x80008000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000
board/omap3/zoom2/zoom2.c new file +76 -0
76 lines not on this page · raw message
board/omap3/zoom2/zoom2.h new file +149 -0
149 lines not on this page · raw message
doc/README.omap3 +13 -2
@@ -19,6 +19,8 @@ Currently the following boards are supported: * TI/Logic PD Zoom MDK [6] +* TI/Logic PD Zoom 2 [7] + Toolchain =========
@@ -54,6 +56,11 @@ make make omap3_zoom1_config make +* Zoom 2: + +make omap3_zoom2_config +make + Custom commands ===============
@@ -80,7 +87,7 @@ help Acknowledgements ================ -OMAP3 U-Boot is based on U-Boot tar ball [7] for BeagleBoard and EVM done by +OMAP3 U-Boot is based on U-Boot tar ball [8] for BeagleBoard and EVM done by several TI employees. Links
@@ -111,6 +118,10 @@ http://openpandora.org/ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit -[7] TI OMAP3 U-Boot: +[7] TI/Logic PD Zoom 2 + +http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf +[8] TI OMAP3 U-Boot: http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz +
include/configs/omap3_zoom2.h new file +226 -0
226 lines not on this page · raw message
Signature · 1 line
1.6.0.5
PATCH 3/6 OMAP3 Port kernel omap gpio interface.
Port the linux kernel's omap gpio interface to u-boot. The orignal source is in linux/arch/arm/plat-omap/gpio.c
See doc/README.omap3 for instructions on use.
--- cpu/arm_cortexa8/omap3/Makefile | 1 + cpu/arm_cortexa8/omap3/gpio.c | 185 +++++++++++++++++++++++++++++++++++++ doc/README.omap3 | 32 +++++++ include/asm-arm/arch-omap3/gpio.h | 86 +++++++++++++++++ 4 files changed, 304 insertions(+), 0 deletions(-) create mode 100644 cpu/arm_cortexa8/omap3/gpio.c create mode 100644 include/asm-arm/arch-omap3/gpio.h
cpu/arm_cortexa8/omap3/Makefile +1 -0
@@ -29,6 +29,7 @@ SOBJS := lowlevel_init.o COBJS += board.o COBJS += clock.o +COBJS += gpio.o COBJS += mem.o COBJS += syslib.o COBJS += sys_info.o
cpu/arm_cortexa8/omap3/gpio.c new file +185 -0
185 lines not on this page · raw message
doc/README.omap3 +32 -0
@@ -84,6 +84,38 @@ For all other commands see help +Interfaces +========== + +gpio + +To set a bit : + + if (!omap_request_gpio(N)) { + omap_set_gpio_direction(N, 0); + omap_set_gpio_dataout(N, 1); + } + +To clear a bit : + + if (!omap_request_gpio(N)) { + omap_set_gpio_direction(N, 0); + omap_set_gpio_dataout(N, 0); + } + +To read a bit : + + if (!omap_request_gpio(N)) { + omap_set_gpio_direction(NULL, 1); + val = omap_get_gpio_datain(N); + omap_free_gpio(N); + } + if (val) + printf("GPIO N is set\n"); + else + printf("GPIO N is clear\n"); + + Acknowledgements ================
include/asm-arm/arch-omap3/gpio.h new file +86 -0
86 lines not on this page · raw message
Signature · 1 line
1.6.0.5
PATCH 4/6 ZOOM2 Add support for debug board detection.
The logicpd web site is a good source for general information on this board. Please start looking here if the below links are broken.
http://www.logicpd.com
This is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
This is a pdf of the product quick start guide.
The debug board is described here.
http://support.logicpd.com/downloads/1165/
This is a wiki showing the debug board in use
https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP
The zoom2 has an auxillary board that contains the serial, net, jtag and battery simulator. This change supports a runtime check if the debug board is connected.
--- board/omap3/zoom2/Makefile | 3 +- board/omap3/zoom2/debug_board.c | 59 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+), 1 deletions(-) create mode 100644 board/omap3/zoom2/debug_board.c
board/omap3/zoom2/Makefile +2 -1
@@ -25,7 +25,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := zoom2.o +COBJS := zoom2.o \ + debug_board.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
board/omap3/zoom2/debug_board.c new file +59 -0
59 lines not on this page · raw message
Signature · 1 line
1.6.0.5
PATCH 5/6 ZOOM2 Add serial support.
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board. The USB connector will produce 2 of the 4 UARTS. On your host pick the first enumeration.
The serial port set up is the same with Zoom1.
Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow.
The kernel bootargs are
console=ttyS3,115200n8
--- board/omap3/zoom2/Makefile | 3 +- board/omap3/zoom2/zoom2.c | 35 ++++++++++ board/omap3/zoom2/zoom2_serial.c | 130 ++++++++++++++++++++++++++++++++++++++ board/omap3/zoom2/zoom2_serial.h | 75 ++++++++++++++++++++++ common/serial.c | 2 + drivers/serial/ns16550.c | 4 +- include/configs/omap3_zoom2.h | 26 ++++---- include/serial.h | 7 ++ 8 files changed, 266 insertions(+), 16 deletions(-) create mode 100644 board/omap3/zoom2/zoom2_serial.c create mode 100644 board/omap3/zoom2/zoom2_serial.h
board/omap3/zoom2/Makefile +2 -1
@@ -26,7 +26,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := zoom2.o \ - debug_board.o + debug_board.o \ + zoom2_serial.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
board/omap3/zoom2/zoom2.c +35 -0
@@ -30,10 +30,29 @@*/ #include <common.h> #include <asm/io.h> +#include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/mach-types.h> #include "zoom2.h" +#include "zoom2_serial.h" + +/* +* This the the zoom2, board specific, gpmc configuration for the +* quad uart on the debug board. The more general gpmc configurations +* are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c +*/ +extern void enable_gpmc_config (u32 *gpmc_config,gpmc_csx_t *gpmc_cs_base, +u32 base,u32 size); + +static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG ] = { +0x00011000 , +0x001F1F01 , +0x00080803 , +0x1D091D09 , +0x041D1F1F , +0x1D0904C4 ,0 +};/* * Routine: board_init
@@ -42,13 +61,29 @@int board_init (void ) {DECLARE_GLOBAL_DATA_PTR ; +gpmc_csx_t *serial_cs_base; +u32 *gpmc_config;gpmc_init ();/* in SRAM or SDRAM, finish GPMC */ + +/* Configure console support on zoom2 */ + gpmc_config = gpmc_serial_TL16CP754C; + serial_cs_base = (gpmc_csx_t *) (GPMC_CONFIG_CS0_BASE + + (3 *GPMC_CONFIG_WIDTH )); +enable_gpmc_config (gpmc_config, + serial_cs_base, +SERIAL_TL16CP754C_BASE , +GPMC_SIZE_16M ); +/* board id for Linux */ gd->bd->bi_arch_number =MACH_TYPE_OMAP_ZOOM2 ;/* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 +0x100 ); +#if defined(CONFIG_STATUS_LED ) && defined(STATUS_LED_BOOT ) +status_led_set (STATUS_LED_BOOT ,STATUS_LED_ON ); +#endif +return 0 ; }
board/omap3/zoom2/zoom2_serial.c new file +130 -0
130 lines not on this page · raw message
board/omap3/zoom2/zoom2_serial.h new file +75 -0
75 lines not on this page · raw message
common/serial.c +2 -0
@@ -68,6 +68,8 @@ struct serial_device *__default_serial_console (void)#else #error "CONFIG_SERIAL? missing."#endif +#elif defined(CONFIG_OMAP3_ZOOM2 ) +return ZOOM2_DEFAULT_SERIAL_DEVICE ;#else #error No default console#endif
drivers/serial/ns16550.c +2 -2
@@ -17,7 +17,7 @@void NS16550_init (NS16550_t com_port,int baud_divisor) { com_port->ier =0x00 ; -#ifdef CONFIG_OMAP +#if defined(CONFIG_OMAP ) && !defined(CONFIG_OMAP3_ZOOM2 ) com_port->mdr1 =0x7 ;/* mode select reset TL16C750*/ #endif com_port->lcr =UART_LCR_BKSE |UART_LCRVAL ;
@@ -30,7 +30,7 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) com_port->dll = baud_divisor &0xff ; com_port->dlm = (baud_divisor >>8 ) &0xff ; com_port->lcr =UART_LCRVAL ; -#if defined(CONFIG_OMAP ) +#if defined(CONFIG_OMAP ) && !defined(CONFIG_OMAP3_ZOOM2 )#if defined(CONFIG_APTIX ) com_port->mdr1 =3 ;/* /13 mode so Aptix 6MHz can hit 115200 */ #else
include/configs/omap3_zoom2.h +13 -13
@@ -69,26 +69,26 @@/* * NS16550 Configuration +* Zoom2 uses the TL16CP754C on the debug board */ -#define V_NS16550_CLK 48000000/* 48MHz (APLL96/2) */ +#define CONFIG_SERIAL_MULTI 1 +/* +* 0 - 1 : first USB with respect to the left edge of the debug board +* 2 - 3 : second USB with respect to the left edge of the debug board +*/ +#define ZOOM2_DEFAULT_SERIAL_DEVICE (&zoom2_serial_device0) + +#define V_NS16550_CLK (1843200)/* 1.8432 Mhz */ #define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_REG_SIZE (-2)#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* -* select serial console configuration -*/ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3/* UART3 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200}/* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} +#define CONFIG_MMC 1#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1
include/serial.h +7 -0
@@ -42,6 +42,13 @@ extern struct serial_device s3c24xx_serial1_device;extern struct serial_device s3c24xx_serial2_device;#endif +#if defined(CONFIG_OMAP3_ZOOM2 ) +extern struct serial_device zoom2_serial_device0; +extern struct serial_device zoom2_serial_device1; +extern struct serial_device zoom2_serial_device2; +extern struct serial_device zoom2_serial_device3; +#endif +extern struct serial_device serial_ffuart_device;extern struct serial_device serial_btuart_device;extern struct serial_device serial_stuart_device;
Signature · 1 line
1.6.0.5
PATCH 6/6 ZOOM2 Add led support.
This patch controls the large LED on the top left of the zoom2.
--- board/omap3/zoom2/Makefile | 8 ++- board/omap3/zoom2/led.c | 129 +++++++++++++++++++++++++++++++++++++++++ board/omap3/zoom2/zoom2.c | 4 +- include/configs/omap3_zoom2.h | 16 +++++ 4 files changed, 153 insertions(+), 4 deletions(-) create mode 100644 board/omap3/zoom2/led.c
board/omap3/zoom2/Makefile +5 -3
@@ -25,10 +25,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := zoom2.o \ - debug_board.o \ - zoom2_serial.o +COBJS-y := $(BOARD).o +COBJS-y += debug_board.o +COBJS-y += zoom2_serial.o +COBJS-$(CONFIG_STATUS_LED) += led.o +COBJS := $(sort $(COBJS-y)) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))
board/omap3/zoom2/led.c new file +129 -0
129 lines not on this page · raw message
board/omap3/zoom2/zoom2.c +3 -1
@@ -29,6 +29,9 @@* MA 02111-1307 USA */ #include <common.h> +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif #include <asm/io.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h>
@@ -83,7 +86,6 @@ int board_init (void)#if defined(CONFIG_STATUS_LED ) && defined(STATUS_LED_BOOT )status_led_set (STATUS_LED_BOOT ,STATUS_LED_ON );#endif -return 0 ; }
include/configs/omap3_zoom2.h +16 -0
@@ -93,6 +93,22 @@#define CONFIG_OMAP3_MMC 1#define CONFIG_DOS_PARTITION 1 +/* Status LED */ +#define CONFIG_STATUS_LED 1/* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_BLUE 0 +#define STATUS_LED_RED 1 +/* Blue */ +#define STATUS_LED_BIT STATUS_LED_BLUE +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +/* Red */ +#define STATUS_LED_BIT1 STATUS_LED_RED +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* Optional value */ +#define STATUS_LED_BOOT STATUS_LED_BIT +/* commands to include */ #include <config_cmd_default.h>
Signature · 1 line
1.6.0.5
PATCH 6/6 ZOOM2 Add led support.
Quoted 4 lines · Tom Rix
This patch controls the large LED on the top left of the zoom2.
Signed-off-by Tom Rix <[email protected]>---
ok
Best Regards,
J.
PATCH 5/6 ZOOM2 Add serial support.
In reply to Tom RixQuoted 61 lines · Tom Rix
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board. The USB connector will produce 2 of the 4 UARTS. On your host pick the first enumeration.
The serial port set up is the same with Zoom1.
Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow.The kernel bootargs are
console=ttyS3,115200n8Signed-off-by Tom Rix <[email protected]>--- board/omap3/zoom2/Makefile | 3 +- board/omap3/zoom2/zoom2.c | 35 ++++++++++ board/omap3/zoom2/zoom2_serial.c | 130 ++++++++++++++++++++++++++++++++++++++ board/omap3/zoom2/zoom2_serial.h | 75 ++++++++++++++++++++++ common/serial.c | 2 + drivers/serial/ns16550.c | 4 +- include/configs/omap3_zoom2.h | 26 ++++---- include/serial.h | 7 ++ 8 files changed, 266 insertions(+), 16 deletions(-) create mode 100644 board/omap3/zoom2/zoom2_serial.c create mode 100644 board/omap3/zoom2/zoom2_serial.hboard/omap3/zoom2/Makefile +2
-1@@ -26,7 +26,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := zoom2.o \ - debug_board.o + debug_board.o \ + zoom2_serial.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))board/omap3/zoom2/zoom2.c +10
-0@@ -30,10 +30,29 @@*/ #include <common.h> #include <asm/io.h> +#include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/mach-types.h> #include "zoom2.h" +#include "zoom2_serial.h" + +/* +* This the the zoom2, board specific, gpmc configuration for the +* quad uart on the debug board. The more general gpmc configurations +* are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c +*/ +extern void enable_gpmc_config (u32 *gpmc_config,gpmc_csx_t *gpmc_cs_base, +u32 base,u32 size);
board/omap3/zoom2/zoom2.c line 56
Quoted 10 lines
board/omap3/zoom2/zoom2.c +9
-0+ +static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG ] = { +0x00011000 , +0x001F1F01 , +0x00080803 , +0x1D091D09 , +0x041D1F1F , +0x1D0904C4 ,0 +};
Any chance to have comment at least about these value?
Best Regards,
J.
PATCH 5/6 ZOOM2 Add serial support.
Quoted 67 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 65 lines · Tom Rix
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board. The USB connector will produce 2 of the 4 UARTS. On your host pick the first enumeration.
The serial port set up is the same with Zoom1.
Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow.The kernel bootargs are
console=ttyS3,115200n8Signed-off-by Tom Rix <[email protected]>--- board/omap3/zoom2/Makefile | 3 +- board/omap3/zoom2/zoom2.c | 35 ++++++++++ board/omap3/zoom2/zoom2_serial.c | 130 ++++++++++++++++++++++++++++++++++++++ board/omap3/zoom2/zoom2_serial.h | 75 ++++++++++++++++++++++ common/serial.c | 2 + drivers/serial/ns16550.c | 4 +- include/configs/omap3_zoom2.h | 26 ++++---- include/serial.h | 7 ++ 8 files changed, 266 insertions(+), 16 deletions(-) create mode 100644 board/omap3/zoom2/zoom2_serial.c create mode 100644 board/omap3/zoom2/zoom2_serial.hboard/omap3/zoom2/Makefile +2
-1@@ -26,7 +26,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := zoom2.o \ - debug_board.o + debug_board.o \ + zoom2_serial.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS))board/omap3/zoom2/zoom2.c +14
-0@@ -30,10 +30,29 @@*/ #include <common.h> #include <asm/io.h> +#include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/mach-types.h> #include "zoom2.h" +#include "zoom2_serial.h" + +/* +* This the the zoom2, board specific, gpmc configuration for the +* quad uart on the debug board. The more general gpmc configurations +* are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c +*/ +extern void enable_gpmc_config (u32 *gpmc_config,gpmc_csx_t *gpmc_cs_base, +u32 base,u32 size); + +static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG ] = { +0x00011000 , +0x001F1F01 ,
Quoted 9 lines
board/omap3/zoom2/zoom2.c
Quoted 7 lines
board/omap3/zoom2/zoom2.c +5
-0+0x00080803 , +0x1D091D09 , +0x041D1F1F , + 0x1D0904C4, 0 +};Any chance to have comment at least about these value?
Sorry. I was given these numbers. I asked and did not get a reply. I will ask again.
Quoted 3 lines
Best Regards,
J.
PATCH 5/6 ZOOM2 Add serial support.
In reply to Jean-Christophe PLAGNIOL-VILLARDQuoted 25 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 11 lines · Tom Rix
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board.
board/omap3/zoom2/zoom2.c +6
-0+/* +* This the the zoom2, board specific, gpmc configuration for the +* quad uart on the debug board. The more general gpmc configurations +* are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c +*/ +extern void enable_gpmc_config(u32 *gpmc_config, gpmc_csx_t *gpmc_cs_base,board/omap3/zoom2/zoom2.c line 55
Quoted 10 lines
board/omap3/zoom2/zoom2.c +10
-0+ u32 base, u32 size); + +static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG ] = { +0x00011000 , +0x001F1F01 , +0x00080803 , +0x1D091D09 , +0x041D1F1F , +0x1D0904C4 ,0 +};Any chance to have comment at least about these value?
Quoted 3 lines
Best Regards,
J.
I have not gotten a response for a better comment.
Can I have a pass on this ?
Tom
PATCH 5/6 ZOOM2 Add serial support.
Quoted 26 lines · Tom
Quoted 15 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 13 lines · Tom Rix
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board.
board/omap3/zoom2/zoom2.c +10
-0+/* +* This the the zoom2, board specific, gpmc configuration for the +* quad uart on the debug board. The more general gpmc configurations +* are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c +*/ +extern void enable_gpmc_config (u32 *gpmc_config,gpmc_csx_t *gpmc_cs_base, +u32 base,u32 size); + +static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG ] = { +0x00011000 ,Quoted 9 lines
board/omap3/zoom2/zoom2.c line 55
Quoted 7 lines
board/omap3/zoom2/zoom2.c +6
-0+0x001F1F01 , +0x00080803 , +0x1D091D09 , +0x041D1F1F , + 0x1D0904C4, 0 +};Any chance to have comment at least about these value?
Quoted 3 lines
I have not gotten a response for a better comment.
Can I have a pass on this ?
ok but add a comment in the code and the commit to explain why you can not provide comment about these values
Best Regards,
J.
PATCH 5/6 ZOOM2 Add serial support.
Quoted 31 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 29 lines · Tom
Quoted 27 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 11 lines · Tom Rix
Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board. The default serial is from the USB connector on left side of the debug board.
board/omap3/zoom2/zoom2.c +6
-0+/* +* This the the zoom2, board specific, gpmc configuration for the +* quad uart on the debug board. The more general gpmc configurations +* are setup at the cpu level in cpu/arm_cortexa8/omap3/mem.c +*/ +extern void enable_gpmc_config(u32 *gpmc_config, gpmc_csx_t *gpmc_cs_base,board/omap3/zoom2/zoom2.c line 55
Quoted 10 lines
board/omap3/zoom2/zoom2.c +10
-0+ u32 base, u32 size); + +static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG ] = { +0x00011000 , +0x001F1F01 , +0x00080803 , +0x1D091D09 , +0x041D1F1F , +0x1D0904C4 ,0 +};Any chance to have comment at least about these value?
Quoted 8 lines
Quoted 4 lines
I have not gotten a response for a better comment.
Can I have a pass on this ?
ok but add a comment in the code and the commit to explain why you can not provide comment about these values
Ok
Quoted 3 lines
Best Regards,
J.
PATCH 3/6 OMAP3 Port kernel omap gpio interface.
In reply to Tom RixQuoted 2 lines · Tom Rix
Port the linux kernel's omap gpio interface to u-boot. The orignal source is in
linux/arch/arm/plat-omap/gpio.c
please specify which specific kernel revision your code is based on
Otherwise fine
Best Regards,
J.
PATCH 3/6 OMAP3 Port kernel omap gpio interface.
Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 3 lines · Tom Rix
Port the linux kernel's omap gpio interface to u-boot. The orignal source is in
linux/arch/arm/plat-omap/gpio.c
Quoted 7 lines
please specify which specific kernel revision your code is based on
Otherwise fine
Best Regards,
J.
I added it to the file headers.
I will add it to the commit message.
Tom
Jean-Christophe PLAGNIOL-VILLARD
AppliedPATCH 2/6 ZOOM2 Add initial support for Zoom2
In reply to Tom RixQuoted 11 lines · Tom Rix
Zoom2 is a new board from Texas Instruments and LogicPD
The logicpd web site is a good source for general information on this board. Please start looking here if the below links are broken.
http://www.logicpd.comThis is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
This is the product description web page
http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
Quoted 8 lines
This patch provides a zoom2 base target by copying zoom1 and by making some obvious changes.
To configure, run
makeomap3_zoom2_configSigned-off-by Tom Rix <[email protected]>---
Applied to arm/next
Best Regards,
J.
Jean-Christophe PLAGNIOL-VILLARD
AppliedPATCH 1/6 OMAP Consolidate common u-boot.lds to cpu layer.
In reply to Tom RixQuoted 5 lines · Tom Rix
The
u-boot.ldsfile is common for all omap boards.
Move a cleaned up version to the cpu layer and add makefile logic to use it.Signed-off-by Tom Rix <[email protected]>---
Applied to arm/next
Best Regards,
J.