bcache-tools: Adding package.
PATCH v5 1/1 bcache-tools: Adding package.
This is the bcache tools, required to setup the linux bcache feature of the Linux kernel.
---
Changes v1 to v2
* remove 'support' word from comment statement in Config.in.
* use github helper to get the project site instead of hardcoded URL.
Changes v2 to v3
* Added bcache-tools description in Config help
* Added bcache-tools URL in Config help
* Added BR2_LARGEFILE BR2_USE_WCHAR and BR2_USE_MMU dependencies in Config.
* Added BR2_PACKAGE_UTIL_LINUX selection in Config
* Added new requirements in Config comment.
* use POST_EXTRACT_HOOKS to modify Makefile
* pass $(TARGET_CONFIGURE_OPTS) in env variables to $(MAKE)
* create man8 dir as part of PRE_INSTALL_TARGET_HOOKS
Changes v3 to v4
* move from .zip file to .tar.gz as download file in .mk file
* use complete git tag as version in .mk file.
* remove explicit extract rule from .mk file (use implicite rule).
Changes v4 to v5
* remove explicit package name in .mk (rely on default behavior).
--- package/Config.in | 1 + package/bcache-tools/Config.in | 22 ++++++++++++++++++++ package/bcache-tools/bcache-tools.mk | 39 ++++++++++++++++++++++++++++++++++++ 3 files changed, 62 insertions(+) create mode 100644 package/bcache-tools/Config.in create mode 100644 package/bcache-tools/bcache-tools.mk
package/Config.in +1 -0
@@ -280,6 +280,7 @@ endmenu source "package/a10disp/Config.in" source "package/acpid/Config.in" source "package/avrdude/Config.in" + source "package/bcache-tools/Config.in" source "package/cdrkit/Config.in" source "package/cryptsetup/Config.in" source "package/cwiid/Config.in"
package/bcache-tools/Config.in new file +22 -0
@@ -0,0 +1,22 @@ +config BR2_PACKAGE_BCACHE_TOOLS + bool "bcache tools" + depends on BR2_PACKAGE_HAS_UDEV + depends on BR2_LARGEFILE # util-linux + depends on BR2_USE_WCHAR # util-linux + depends on BR2_USE_MMU # util-linux (libblkid) + select BR2_PACKAGE_UTIL_LINUX + select BR2_PACKAGE_UTIL_LINUX_LIBUUID + select BR2_PACKAGE_UTIL_LINUX_LIBBLKID + help + Bcache is a Linux kernel block layer cache. It allows one or + more fast disk drives such as flash-based solid state drives (SSDs) + to act as a cache for one or more slower hard disk drives. + + http://bcache.evilpiepirate.org/ + + This is the user space bcache tools, required to setup the linux + bcache feature of the Linux kernel. + +comment "bcache-tools needs udev /dev management and a toolchain w/ largefile, wchar" + depends on BR2_USE_MMU + depends on !BR2_PACKAGE_HAS_UDEV || !BR2_LARGEFILE || !BR2_USE_WCHAR
package/bcache-tools/bcache-tools.mk new file +39 -0
@@ -0,0 +1,39 @@ +################################################################################ +# +# bcache-tools +# +################################################################################ + +BCACHE_TOOLS_VERSION = v1.0.7 +BCACHE_TOOLS_SITE = $(call github,g2p,bcache-tools,$(BCACHE_TOOLS_VERSION)) +BCACHE_TOOLS_LICENSE = GPLv2 +BCACHE_TOOLS_LICENSE_FILES = COPYING +BCACHE_TOOLS_DEPENDENCIES = host-pkgconf util-linux eudev + +# We need to use the BR2 host pkg-config binary in the Makefile +define BCACHE_TOOLS_FIX_PKGCONFIG + $(SED) 's^`pkg-config^`$(PKG_CONFIG_HOST_BINARY)^' \ + $(BCACHE_TOOLS_DIR)/Makefile +endef + +BCACHE_TOOLS_POST_EXTRACT_HOOKS += BCACHE_TOOLS_FIX_PKGCONFIG + +# We pass $(TARGET_CONFIGURE_OPTS) as environment variable to allow +# the bcache-tools Makefile to alter CFLAGS +define BCACHE_TOOLS_BUILD_CMDS + $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) +endef + +# The bcache-tools Makefile expects the man8 directory to exist. +define BCACHE_TOOLS_INSTALL_MAN8 + $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8 +endef + +BCACHE_TOOLS_PRE_INSTALL_TARGET_HOOKS += BCACHE_TOOLS_INSTALL_MAN8 + +define BCACHE_TOOLS_INSTALL_TARGET_CMDS + $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) \ + DESTDIR=$(TARGET_DIR) install +endef + +$(eval $(generic-package))
Signature · 1 line
1.9.1
PATCH v5 1/1 bcache-tools: Adding package.
Jean-Christophe, All,
On 2014-08-05 19:29 +0200, Jean-Christophe DUBOIS spake thusly:
Quoted 2 lines
This is the bcache tools, required to setup the linux bcache feature of the Linux kernel.
We're almost there! :-)
Quoted 1 line
Signed-off-by Jean-Christophe DUBOIS <[email protected]>
[--SNIP--]
package/bcache-tools/Config.in
Quoted 5 lines
package/bcache-tools/Config.in new file +0
-0
[--SNIP--]
package/bcache-tools/Config.in line 22
Quoted 3 lines
package/bcache-tools/Config.in new file +3
-0+comment "bcache-tools needs udev /dev management and a toolchain w/ largefile, wchar" + depends on BR2_USE_MMU + depends on !BR2_PACKAGE_HAS_UDEV || !BR2_LARGEFILE || !BR2_USE_WCHAR
Leading TAB, please.
Quoted 13 lines
package/bcache-tools/bcache-tools.mk new file +7
-0@@ -0,0 +1,39 @@ +################################################################################ +# +# bcache-tools +# +################################################################################ + +BCACHE_TOOLS_VERSION = v1.0.7
package/bcache-tools/bcache-tools.mk line 17
Quoted 10 lines
package/bcache-tools/bcache-tools.mk new file +10
-0+BCACHE_TOOLS_SITE = $(call github,g2p,bcache-tools,$(BCACHE_TOOLS_VERSION)) +BCACHE_TOOLS_LICENSE = GPLv2 +BCACHE_TOOLS_LICENSE_FILES = COPYING +BCACHE_TOOLS_DEPENDENCIES = host-pkgconf util-linux eudev + +# We need to use the BR2 host pkg-config binary in the Makefile +define BCACHE_TOOLS_FIX_PKGCONFIG + $(SED) 's^`pkg-config^`$(PKG_CONFIG_HOST_BINARY)^' \ + $(BCACHE_TOOLS_DIR)/Makefile +endef
This is not needed, since the host directory comes early in the PATH, so it finds our own pkg-config.
package/bcache-tools/bcache-tools.mk line 30
Quoted 12 lines
package/bcache-tools/bcache-tools.mk new file +12
-0+BCACHE_TOOLS_POST_EXTRACT_HOOKS += BCACHE_TOOLS_FIX_PKGCONFIG + +# We pass $(TARGET_CONFIGURE_OPTS) as environment variable to allow +# the bcache-tools Makefile to alter CFLAGS +define BCACHE_TOOLS_BUILD_CMDS + $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) +endef + +# The bcache-tools Makefile expects the man8 directory to exist. +define BCACHE_TOOLS_INSTALL_MAN8 + $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8 +endef
In Buildroot, the man pages are simply removed from the target/ dir jsut prior to generatign the filesystem images.
Then, why not simply patch the Makefile to not install them in the first place? Like, in a post-extract hook.
Thanks for your persistence! :-)
Regards,
Yann E. MORIN.
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH v5 1/1 bcache-tools: Adding package.
Dear Yann E. MORIN,
Quoted 10 lines · Yann E. MORIN
package/bcache-tools/bcache-tools.mk line 30
Quoted 4 lines
package/bcache-tools/bcache-tools.mk new file +4
-0+# The bcache-tools Makefile expects the man8 directory to exist. +define BCACHE_TOOLS_INSTALL_MAN8 + $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8 +endefIn Buildroot, the man pages are simply removed from the target/ dir jsut prior to generatign the filesystem images.
Then, why not simply patch the
Makefileto not install them in the first place? Like, in a post-extract hook.
I disagree. I would prefer to make a patch that actually fixes the installation of the man pages and submit this patch upstream. This way, when upstream releases a new version, we can get rid of the patch, and simply do "make install" without any other thing to do. Buildroot will take care of removing the man pages.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com