Skip to contentSkip to conversation

fs: introduce new writeback error reporting and convert existing API as a wrapper around it

PATCH Superseded Jeff Layton 6 participants 49 messages Apr 24, 2017 – Apr 25, 2017

Subsystems (23)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover fs: introduce new writeback error reporting and convert existing API as a wrapper around it

v3: wb_err_t -> errseq_t
clean up places that re-set errors after calling filemap_* functions

v2: introduce wb_err_t, use atomics

Apologies for the wide posting here, but this touches a lot of areas. This is v3 of the patchset to improve how we're tracking and reporting errors that occur during pagecache writeback.

There are several situations where the kernel can "lose" errors that occur during writeback, such that fsync will return success even though it failed to write back some data previously. The basic idea here is to have the kernel be more deliberate about the point from which errors are checked to ensure that that doesn't happen.

Additionally, this set changes the behavior of fsync in Linux to report writeback errors on all fds instead of just the first one. This allows writers to reliably tell whether their data made it to the backing device without having to coordinate fsync calls with other writers.

This set sprawls over a large swath of kernel code. I think the first 12 patches in the series are pretty straightforward and are more or less ready for merge.

The real changes start with patch 13. That adds support for errseq_t, builds a new writeback error tracking API on top of that, and converts the existing code to use it. After that, there are a few cleanup patches to eliminate some unneeded error re-setting, etc.

Unfortunately, testing this across so many filesystems is rather difficult. I have a xfstest for block-based filesystems that uses dm_error that I'll post soon. That works well with ext4, but btrfs and xfs seem to go r/o soon after the first error. I also don't have a good general method for testing this on network filesystems (yet!).

I'd like to see better testing here and am open to suggestions. I will note that the POSIX fsync spec says this:

"It is reasonable to assert that the key aspects of fsync() are unreasonable to test in a test suite. That does not make the function any less valuable, just more difficult to test. [...] It would also not be unreasonable to omit testing for fsync(), allowing it to be treated as a quality-of-implementation issue."

Of course, they're talking about a POSIX conformance test, but I think the same point applies here.

At this point, I'd like to start getting some of the preliminary patches merged (the first 12 or so). Most of those aren't terribly controversial and seem like reasonable bugfixes and cleanups. If any subsystem maintainers want to pick those up, then please do.

After that, I'd like to get the larger changes into linux-next with an aim for merge in v4.13 or v4.14 (depending on how testing goes).

Feedback is of course welcome!

Jeff Layton (20):
mm: drop "wait" parameter from write_one_page
mm: fix mapping_set_error call in me_pagecache_dirty
buffer: use mapping_set_error instead of setting the flag
fs: check for writeback errors after syncing out buffers in
generic_file_fsync
orangefs: don't call filemap_write_and_wait from fsync
dax: set errors in mapping when writeback fails
nilfs2: set the mapping error when calling SetPageError on writeback
mm: ensure that we set mapping error if writeout() fails 9p: set mapping error when writeback fails in launder_page
fuse: set mapping error in writepage_locked when it fails
cifs: set mapping error when page writeback fails in writepage or
launder_pages
lib: add errseq_t type and infrastructure for handling it
fs: new infrastructure for writeback error handling and reporting
fs: retrofit old error reporting API onto new infrastructure
mm: remove AS_EIO and AS_ENOSPC flags
mm: don't TestClearPageError in __filemap_fdatawait_range
cifs: cleanup writeback handling errors and comments
mm: clean up error handling in write_one_page
jbd2: don't reset error in journal_finish_inode_data_buffers
gfs2: clean up some filemap_* calls

 Documentation/filesystems/vfs.txt |   9 +-
 fs/9p/vfs_addr.c                  |   5 +-
 fs/btrfs/file.c                   |  10 +-
 fs/btrfs/tree-log.c               |   9 +-
 fs/buffer.c                       |   2 +-
 fs/cifs/cifsfs.c                  |   4 +-
 fs/cifs/file.c                    |  17 ++--
 fs/cifs/inode.c                   |  22 ++---
 fs/dax.c                          |   4 +-
 fs/exofs/dir.c                    |   2 +-
 fs/ext2/dir.c                     |   2 +-
 fs/ext2/file.c                    |   2 +-
 fs/f2fs/file.c                    |   3 +
 fs/f2fs/node.c                    |   6 +-
 fs/fuse/file.c                    |   8 +-
 fs/gfs2/glops.c                   |  12 +--
 fs/gfs2/lops.c                    |   4 +-
 fs/gfs2/super.c                   |   6 +-
 fs/jbd2/commit.c                  |  13 +--
 fs/jfs/jfs_metapage.c             |   4 +-
 fs/libfs.c                        |   3 +
 fs/minix/dir.c                    |   2 +-
 fs/nilfs2/segment.c               |   1 +
 fs/open.c                         |   3 +
 fs/orangefs/file.c                |   5 +-
 fs/sysv/dir.c                     |   2 +-
 fs/ufs/dir.c                      |   2 +-
 include/linux/errseq.h            |  16 +++
 include/linux/fs.h                |  41 ++++++--
 include/linux/mm.h                |   2 +-
 include/linux/pagemap.h           |  18 ++--
 lib/Makefile                      |   2 +-
 lib/errseq.c                      | 199 ++++++++++++++++++++++++++++++++++++++
 mm/filemap.c                      |  88 ++++++++++-------
 mm/memory-failure.c               |   2 +-
 mm/migrate.c                      |   6 +-
 mm/page-writeback.c               |  23 +++--
 37 files changed, 398 insertions(+), 161 deletions(-)
 create mode 100644 include/linux/errseq.h
 create mode 100644 lib/errseq.c
Signature · 1 line
2.9.3
#1 lore raw

PATCH v3 1/20 mm: drop "wait" parameter from write_one_page

The callers all set it to 1.

Also, make it clear that this function will not set any sort of AS_* error, and that the caller must do so if necessary. No existing caller uses this on normal files, so none of them need it.

Also, add __must_check here since, in general, the callers need to handle an error here in some fashion.

---
 fs/exofs/dir.c        |  2 +-
 fs/ext2/dir.c         |  2 +-
 fs/jfs/jfs_metapage.c |  4 ++--
 fs/minix/dir.c        |  2 +-
 fs/sysv/dir.c         |  2 +-
 fs/ufs/dir.c          |  2 +-
 include/linux/mm.h    |  2 +-
 mm/page-writeback.c   | 14 +++++++-------
 8 files changed, 15 insertions(+), 15 deletions(-)
fs/exofs/dir.c +1 -1
index 42f9a0a0c4ca..e163ed980c20 100644
@@ -72,7 +72,7 @@ static int exofs_commit_chunk(struct page *page, loff_t pos, unsigned len)
 	set_page_dirty(page);
 
 	if (IS_DIRSYNC(dir))
-		err = write_one_page(page, 1);
+		err = write_one_page(page);
 	else
 		unlock_page(page);
 
fs/ext2/dir.c +1 -1
index d9650c9508e4..e2709695b177 100644
@@ -100,7 +100,7 @@ static int ext2_commit_chunk(struct page *page, loff_t pos, unsigned len)
 	}
 
 	if (IS_DIRSYNC(dir)) {
-		err = write_one_page(page, 1);
+		err = write_one_page(page);
 		if (!err)
 			err = sync_inode_metadata(dir, 1);
 	} else {
fs/jfs/jfs_metapage.c +2 -2
index 489aaa1403e5..744fa3c079e6 100644
@@ -711,7 +711,7 @@ void force_metapage(struct metapage *mp)
 	get_page(page);
 	lock_page(page);
 	set_page_dirty(page);
-	write_one_page(page, 1);
+	write_one_page(page);
 	clear_bit(META_forcewrite, &mp->flag);
 	put_page(page);
 }
@@ -756,7 +756,7 @@ void release_metapage(struct metapage * mp)
 		set_page_dirty(page);
 		if (test_bit(META_sync, &mp->flag)) {
 			clear_bit(META_sync, &mp->flag);
-			write_one_page(page, 1);
+			write_one_page(page);
 			lock_page(page); /* write_one_page unlocks the page */
 		}
 	} else if (mp->lsn)	/* discard_metapage doesn't remove it */
fs/minix/dir.c +1 -1
index 7edc9b395700..baa9721f1299 100644
@@ -57,7 +57,7 @@ static int dir_commit_chunk(struct page *page, loff_t pos, unsigned len)
 		mark_inode_dirty(dir);
 	}
 	if (IS_DIRSYNC(dir))
-		err = write_one_page(page, 1);
+		err = write_one_page(page);
 	else
 		unlock_page(page);
 	return err;
fs/sysv/dir.c +1 -1
index 5bdae85ceef7..f5191cb2c947 100644
@@ -45,7 +45,7 @@ static int dir_commit_chunk(struct page *page, loff_t pos, unsigned len)
 		mark_inode_dirty(dir);
 	}
 	if (IS_DIRSYNC(dir))
-		err = write_one_page(page, 1);
+		err = write_one_page(page);
 	else
 		unlock_page(page);
 	return err;
fs/ufs/dir.c +1 -1
index de01b8f2aa78..48609f1d9580 100644
@@ -53,7 +53,7 @@ static int ufs_commit_chunk(struct page *page, loff_t pos, unsigned len)
 		mark_inode_dirty(dir);
 	}
 	if (IS_DIRSYNC(dir))
-		err = write_one_page(page, 1);
+		err = write_one_page(page);
 	else
 		unlock_page(page);
 	return err;
include/linux/mm.h +1 -1
index 00a8fa7e366a..403f78afee20 100644
@@ -2187,7 +2187,7 @@ extern void filemap_map_pages(struct vm_fault *vmf,
 extern int filemap_page_mkwrite(struct vm_fault *vmf);
 
 /* mm/page-writeback.c */
-int write_one_page(struct page *page, int wait);
+int __must_check write_one_page(struct page *page);
 void task_dirty_inc(struct task_struct *tsk);
 
 /* readahead.c */
mm/page-writeback.c +7 -7
index d8ac2a7fb9e7..de0dbf12e2c1 100644
@@ -2361,15 +2361,16 @@ int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
 }
 
 /**
- * write_one_page - write out a single page and optionally wait on I/O
+ * write_one_page - write out a single page and wait on I/O
  * @page: the page to write
- * @wait: if true, wait on writeout
  *
  * The page must be locked by the caller and will be unlocked upon return.
  *
- * write_one_page() returns a negative error code if I/O failed.
+ * write_one_page() returns a negative error code if I/O failed. Note that
+ * the address_space is not marked for error. The caller must do this if
+ * needed.
  */
-int write_one_page(struct page *page, int wait)
+int write_one_page(struct page *page)
 {
 	struct address_space *mapping = page->mapping;
 	int ret = 0;
@@ -2380,13 +2381,12 @@ int write_one_page(struct page *page, int wait)
 
 	BUG_ON(!PageLocked(page));
 
-	if (wait)
-		wait_on_page_writeback(page);
+	wait_on_page_writeback(page);
 
 	if (clear_page_dirty_for_io(page)) {
 		get_page(page);
 		ret = mapping->a_ops->writepage(page, &wbc);
-		if (ret == 0 && wait) {
+		if (ret == 0) {
 			wait_on_page_writeback(page);
 			if (PageError(page))
 				ret = -EIO;
Signature · 1 line
2.9.3
#3 lore raw

PATCH v3 2/20 mm: fix mapping_set_error call in me_pagecache_dirty

In reply to Jeff Layton

The error code should be negative. Since this ends up in the default case anyway, this is harmless, but it's less confusing to negate it. Also, later patches will require a negative error code here.

---
 mm/memory-failure.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/memory-failure.c +1 -1
index 27f7210e7fab..4b56e53e5378 100644
@@ -674,7 +674,7 @@ static int me_pagecache_dirty(struct page *p, unsigned long pfn)
 		 * the first EIO, but we're not worse than other parts
 		 * of the kernel.
 		 */
-		mapping_set_error(mapping, EIO);
+		mapping_set_error(mapping, -EIO);
 	}
 
 	return me_pagecache_clean(p, pfn);
Signature · 1 line
2.9.3
#5 lore raw

PATCH v3 3/20 buffer: use mapping_set_error instead of setting the flag

In reply to Jeff Layton
---
 fs/buffer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/buffer.c +1 -1
index 9196f2a270da..70638941066d 100644
@@ -483,7 +483,7 @@ static void __remove_assoc_queue(struct buffer_head *bh)
 	list_del_init(&bh->b_assoc_buffers);
 	WARN_ON(!bh->b_assoc_map);
 	if (buffer_write_io_error(bh))
-		set_bit(AS_EIO, &bh->b_assoc_map->flags);
+		mapping_set_error(bh->b_assoc_map, -EIO);
 	bh->b_assoc_map = NULL;
 }
 
Signature · 1 line
2.9.3
#7 lore raw

PATCH v3 4/20 fs: check for writeback errors after syncing out buffers in generic_file_fsync

In reply to Jeff Layton

ext2 currently does a test+clear of the AS_EIO flag, which is is problematic for some coming changes.

What we really need to do instead is call filemap_check_errors in __generic_file_fsync after syncing out the buffers. That will be sufficient for this case, and help other callers detect these errors properly as well.

With that, we don't need to twiddle it in ext2.

---
 fs/ext2/file.c | 2 +-
 fs/libfs.c     | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)
fs/ext2/file.c +1 -1
index b21891a6bfca..ed00e7ae0ef3 100644
@@ -177,7 +177,7 @@ int ext2_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	struct address_space *mapping = sb->s_bdev->bd_inode->i_mapping;
 
 	ret = generic_file_fsync(file, start, end, datasync);
-	if (ret == -EIO || test_and_clear_bit(AS_EIO, &mapping->flags)) {
+	if (ret == -EIO) {
 		/* We don't really know where the IO error happened... */
 		ext2_error(sb, __func__,
 			   "detected IO error when writing metadata buffers");
fs/libfs.c +2 -1
index a8b62e5d43a9..12a48ee442d3 100644
@@ -991,7 +991,8 @@ int __generic_file_fsync(struct file *file, loff_t start, loff_t end,
 
 out:
 	inode_unlock(inode);
-	return ret;
+	err = filemap_check_errors(inode->i_mapping);
+	return ret ? : err;
 }
 EXPORT_SYMBOL(__generic_file_fsync);
 
Signature · 1 line
2.9.3
Reviewed-by on v3 4/20
#8 lore raw

Re: [PATCH v3 04/20] fs: check for writeback errors after syncing out buffers in generic_file_fsync

fs/libfs.c int __generic_file_fsync(struct file *file, loff_t start, loff_t end, · line 995

Quoted 5 lines

out:

fs/libfs.c +2 -1
 	inode_unlock(inode);
-	return ret;
+	err = filemap_check_errors(inode->i_mapping);
+	return ret ? : err;

Can you spell out the whole unary operation instead of this weird GCC extension?

Otherwise looks fine:

maintainer Reviewed-by on v3 4/20
#9 lore raw

Re: [PATCH v3 04/20] fs: check for writeback errors after syncing out buffers in generic_file_fsync

In reply to Jeff Layton
Quoted 8 lines · Jeff Layton

ext2 currently does a test+clear of the AS_EIO flag, which is is problematic for some coming changes.

What we really need to do instead is call filemap_check_errors in __generic_file_fsync after syncing out the buffers. That will be sufficient for this case, and help other callers detect these errors properly as well.

Quoted 4 lines

With that, we don't need to twiddle it in ext2.

Looks good to me. You can add:

Honza

Quoted 36 lines
---
 fs/ext2/file.c | 2 +-
 fs/libfs.c     | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)
fs/ext2/file.c +1 -1
index b21891a6bfca..ed00e7ae0ef3 100644
@@ -177,7 +177,7 @@ int ext2_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 	struct address_space *mapping = sb->s_bdev->bd_inode->i_mapping;
 
 	ret = generic_file_fsync(file, start, end, datasync);
-	if (ret == -EIO || test_and_clear_bit(AS_EIO, &mapping->flags)) {
+	if (ret == -EIO) {
 		/* We don't really know where the IO error happened... */
 		ext2_error(sb, __func__,
 			   "detected IO error when writing metadata buffers");
fs/libfs.c +2 -1
index a8b62e5d43a9..12a48ee442d3 100644
@@ -991,7 +991,8 @@ int __generic_file_fsync(struct file *file, loff_t start, loff_t end,
 
 out:
 	inode_unlock(inode);
-	return ret;
+	err = filemap_check_errors(inode->i_mapping);
+	return ret ? : err;
 }
 EXPORT_SYMBOL(__generic_file_fsync);
 
Signature · 1 line
2.9.3
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#10 lore raw

PATCH v3 5/20 orangefs: don't call filemap_write_and_wait from fsync

In reply to Jeff Layton

Orangefs doesn't do buffered writes yet, so there's no point in initiating and waiting for writeback.

---
 fs/orangefs/file.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
fs/orangefs/file.c +1 -4
index e6bbc8083d77..17ab42c4db52 100644
@@ -646,14 +646,11 @@ static int orangefs_fsync(struct file *file,
 		       loff_t end,
 		       int datasync)
 {
-	int ret = -EINVAL;
+	int ret;
 	struct orangefs_inode_s *orangefs_inode =
 		ORANGEFS_I(file_inode(file));
 	struct orangefs_kernel_op_s *new_op = NULL;
 
-	/* required call */
-	filemap_write_and_wait_range(file->f_mapping, start, end);
-
 	new_op = op_alloc(ORANGEFS_VFS_OP_FSYNC);
 	if (!new_op)
 		return -ENOMEM;
Signature · 1 line
2.9.3
#13 lore raw

PATCH v3 6/20 dax: set errors in mapping when writeback fails

In reply to Jeff Layton

In order to get proper error codes from fsync, we must set an error in the mapping range when writeback fails.

---
 fs/dax.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/dax.c +3 -1
index 85abd741253d..9b6b04030c3f 100644
@@ -901,8 +901,10 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 
 			ret = dax_writeback_one(bdev, mapping, indices[i],
 					pvec.pages[i]);
-			if (ret < 0)
+			if (ret < 0) {
+				mapping_set_error(mapping, ret);
 				return ret;
+			}
 		}
 	}
 	return 0;
Signature · 1 line
2.9.3
maintainer Reviewed-by on v3 6/20
#15 lore raw

Re: [PATCH v3 06/20] dax: set errors in mapping when writeback fails

In reply to Jeff Layton
Quoted 4 lines · Jeff Layton

In order to get proper error codes from fsync, we must set an error in the mapping range when writeback fails.

So I'm fine with the change but please expand the changelog to something like:

DAX currently doesn't set errors in the mapping when cache flushing fails in dax_writeback_mapping_range(). Since this function can get called only from fsync(2) or sync(2), this is actually as good as it can currently get since we correctly propagate the error up from dax_writeback_mapping_range() to filemap_fdatawrite(). However in the future better writeback error handling will enable us to properly report these errors on fsync(2) even if there are multiple file descriptors open against the file or if sync(2) gets called before fsync(2). So convert DAX to using standard error reporting through the mapping.

After improving the changelog you can add:

Honza

Quoted 24 lines
---
 fs/dax.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/dax.c +3 -1
index 85abd741253d..9b6b04030c3f 100644
@@ -901,8 +901,10 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 
 			ret = dax_writeback_one(bdev, mapping, indices[i],
 					pvec.pages[i]);
-			if (ret < 0)
+			if (ret < 0) {
+				mapping_set_error(mapping, ret);
 				return ret;
+			}
 		}
 	}
 	return 0;
Signature · 1 line
2.9.3
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
Tested-by on v3 6/20
#16 lore raw

Re: [PATCH v3 06/20] dax: set errors in mapping when writeback fails

In reply to Jeff Layton
Quoted 4 lines · Jeff Layton

In order to get proper error codes from fsync, we must set an error in the mapping range when writeback fails.

Works fine in some error injection testing.

Quoted 23 lines
---
 fs/dax.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/dax.c +3 -1
index 85abd741253d..9b6b04030c3f 100644
@@ -901,8 +901,10 @@ int dax_writeback_mapping_range(struct address_space *mapping,
 
 			ret = dax_writeback_one(bdev, mapping, indices[i],
 					pvec.pages[i]);
-			if (ret < 0)
+			if (ret < 0) {
+				mapping_set_error(mapping, ret);
 				return ret;
+			}
 		}
 	}
 	return 0;
Signature · 1 line
2.9.3
#17 lore raw

PATCH v3 7/20 nilfs2: set the mapping error when calling SetPageError on writeback

In reply to Jeff Layton

In a later patch, we're going to want to make the fsync codepath not do a TestClearPageError call as that can override the error set in the address space. To do that though, we need to ensure that filesystems that are relying on the PG_error bit for reporting writeback errors also set an error in the address space.

Ensure that this is set in nilfs2.

Cc Ryusuke Konishi <[email protected]>
---
 fs/nilfs2/segment.c | 1 +
 1 file changed, 1 insertion(+)
fs/nilfs2/segment.c +1 -0
index febed1217b3f..612d4b446793 100644
@@ -1745,6 +1745,7 @@ static void nilfs_end_page_io(struct page *page, int err)
 	} else {
 		__set_page_dirty_nobuffers(page);
 		SetPageError(page);
+		mapping_set_error(page_mapping(page), err);
 	}
 
 	end_page_writeback(page);
Signature · 1 line
2.9.3
#19 lore raw

PATCH v3 8/20 mm: ensure that we set mapping error if writeout() fails

In reply to Jeff Layton

If writepage fails during a page migration, then we need to ensure that fsync will see it by flagging the mapping.

---
 mm/migrate.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
mm/migrate.c +5 -1
index 738f1d5f8350..3a59830bdae2 100644
@@ -792,7 +792,11 @@ static int writeout(struct address_space *mapping, struct page *page)
 		/* unlocked. Relock */
 		lock_page(page);
 
-	return (rc < 0) ? -EIO : -EAGAIN;
+	if (rc < 0) {
+		mapping_set_error(mapping, rc);
+		return -EIO;
+	}
+	return -EAGAIN;
 }
 
 /*
Signature · 1 line
2.9.3
maintainer Reviewed-by on v3 8/20
#21 lore raw

Re: [PATCH v3 08/20] mm: ensure that we set mapping error if writeout() fails

In reply to Jeff Layton
Quoted 4 lines · Jeff Layton

If writepage fails during a page migration, then we need to ensure that fsync will see it by flagging the mapping.

Looks good to me. You can add:

Honza

Quoted 25 lines
---
 mm/migrate.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
mm/migrate.c +5 -1
index 738f1d5f8350..3a59830bdae2 100644
@@ -792,7 +792,11 @@ static int writeout(struct address_space *mapping, struct page *page)
 		/* unlocked. Relock */
 		lock_page(page);
 
-	return (rc < 0) ? -EIO : -EAGAIN;
+	if (rc < 0) {
+		mapping_set_error(mapping, rc);
+		return -EIO;
+	}
+	return -EAGAIN;
 }
 
 /*
Signature · 1 line
2.9.3
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#22 lore raw

PATCH v3 9/20 9p: set mapping error when writeback fails in launder_page

In reply to Jeff Layton

launder_page is just writeback under the page lock. We still need to mark the mapping for errors there when they occur.

---
 fs/9p/vfs_addr.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
fs/9p/vfs_addr.c +4 -1
index adaf6f6dd858..7af6e6501698 100644
@@ -223,8 +223,11 @@ static int v9fs_launder_page(struct page *page)
 	v9fs_fscache_wait_on_page_write(inode, page);
 	if (clear_page_dirty_for_io(page)) {
 		retval = v9fs_vfs_writepage_locked(page);
-		if (retval)
+		if (retval) {
+			if (retval != -EAGAIN)
+				mapping_set_error(page->mapping, retval);
 			return retval;
+		}
 	}
 	return 0;
 }
Signature · 1 line
2.9.3
maintainer Reviewed-by on v3 9/20
#24 lore raw

Re: [PATCH v3 09/20] 9p: set mapping error when writeback fails in launder_page

In reply to Jeff Layton
Quoted 4 lines · Jeff Layton

launder_page is just writeback under the page lock. We still need to mark the mapping for errors there when they occur.

Looks good. You can add:

Honza

Quoted 25 lines
---
 fs/9p/vfs_addr.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
fs/9p/vfs_addr.c +4 -1
index adaf6f6dd858..7af6e6501698 100644
@@ -223,8 +223,11 @@ static int v9fs_launder_page(struct page *page)
 	v9fs_fscache_wait_on_page_write(inode, page);
 	if (clear_page_dirty_for_io(page)) {
 		retval = v9fs_vfs_writepage_locked(page);
-		if (retval)
+		if (retval) {
+			if (retval != -EAGAIN)
+				mapping_set_error(page->mapping, retval);
 			return retval;
+		}
 	}
 	return 0;
 }
Signature · 1 line
2.9.3
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#25 lore raw

PATCH v3 10/20 fuse: set mapping error in writepage_locked when it fails

In reply to Jeff Layton

This ensures that we see errors on fsync when writeback fails.

---
 fs/fuse/file.c | 1 +
 1 file changed, 1 insertion(+)
fs/fuse/file.c +1 -0
index ec238fb5a584..07d0efcb050c 100644
@@ -1669,6 +1669,7 @@ static int fuse_writepage_locked(struct page *page)
 err_free:
 	fuse_request_free(req);
 err:
+	mapping_set_error(page->mapping, error);
 	end_page_writeback(page);
 	return error;
 }
Signature · 1 line
2.9.3
maintainer
#27 lore raw

Re: [PATCH v3 10/20] fuse: set mapping error in writepage_locked when it fails

In reply to Jeff Layton
Quoted 3 lines · Jeff Layton

This ensures that we see errors on fsync when writeback fails.

Hum, but do we really want to clobber mapping errors with temporary stuff like ENOMEM? Or do you want to handle that in mapping_set_error?

Honza

Quoted 20 lines
---
 fs/fuse/file.c | 1 +
 1 file changed, 1 insertion(+)
fs/fuse/file.c +1 -0
index ec238fb5a584..07d0efcb050c 100644
@@ -1669,6 +1669,7 @@ static int fuse_writepage_locked(struct page *page)
 err_free:
 	fuse_request_free(req);
 err:
+	mapping_set_error(page->mapping, error);
 	end_page_writeback(page);
 	return error;
 }
Signature · 1 line
2.9.3
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#28 lore raw

Re: [PATCH v3 10/20] fuse: set mapping error in writepage_locked when it fails

Quoted 8 lines · Jan Kara
Quoted 3 lines · Jeff Layton

This ensures that we see errors on fsync when writeback fails.

Hum, but do we really want to clobber mapping errors with temporary stuff like ENOMEM? Or do you want to handle that in mapping_set_error?

Right now we don't really have such a thing as temporary errors in the writeback codepath. If you return an error here, the data doesn't stay dirty or anything, and I think we want to ensure that that gets reported via fsync.

I'd like to see us add better handling for retryable errors for stuff like ENOMEM or EAGAIN. I think this is the first step toward that though. Once we have more consistent handling of writeback errors in general, then we can start doing more interesting things with retryable errors.

So yeah, I this is the right thing to do for now.

Quoted 21 lines
Quoted 21 lines
---
 fs/fuse/file.c | 1 +
 1 file changed, 1 insertion(+)
fs/fuse/file.c +1 -0
index ec238fb5a584..07d0efcb050c 100644
@@ -1669,6 +1669,7 @@ static int fuse_writepage_locked(struct page *page)
 err_free:
 	fuse_request_free(req);
 err:
+	mapping_set_error(page->mapping, error);
 	end_page_writeback(page);
 	return error;
 }
Signature · 1 line
2.9.3
Signature · 1 line
Jeff Layton <[email protected]>
maintainer
#29 lore raw

Re: [PATCH v3 10/20] fuse: set mapping error in writepage_locked when it fails

Quoted 15 lines · Jeff Layton
Quoted 8 lines · Jan Kara
Quoted 3 lines · Jeff Layton

This ensures that we see errors on fsync when writeback fails.

Hum, but do we really want to clobber mapping errors with temporary stuff like ENOMEM? Or do you want to handle that in mapping_set_error?

Right now we don't really have such a thing as temporary errors in the writeback codepath. If you return an error here, the data doesn't stay dirty or anything, and I think we want to ensure that that gets reported via fsync.

Quoted 7 lines

I'd like to see us add better handling for retryable errors for stuff like ENOMEM or EAGAIN. I think this is the first step toward that though. Once we have more consistent handling of writeback errors in general, then we can start doing more interesting things with retryable errors.

So yeah, I this is the right thing to do for now.

OK, fair enough. And question number 2):

Who is actually responsible for setting the error in the mapping when error happens inside ->writepage()? Is it the ->writepage() callback or the caller of ->writepage()? Or something else? Currently it seems to be a strange mix (e.g. mm/page-writeback.c: __writepage() calls mapping_set_error() when ->writepage() returns error) so I'd like to understand what's the plan and have that recorded in the changelogs.

Honza

Quoted 25 lines
Quoted 22 lines
Quoted 22 lines

---
 fs/fuse/file.c | 1 +
 1 file changed, 1 insertion(+)
fs/fuse/file.c +1 -0
index ec238fb5a584..07d0efcb050c 100644
@@ -1669,6 +1669,7 @@ static int fuse_writepage_locked(struct page *page)
 err_free:
 	fuse_request_free(req);
 err:
+	mapping_set_error(page->mapping, error);
 	end_page_writeback(page);
 	return error;
 }
Signature · 1 line
2.9.3
Signature · 1 line
Jeff Layton <[email protected]>
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#30 lore raw

Re: [PATCH v3 10/20] fuse: set mapping error in writepage_locked when it fails

Quoted 24 lines · Jan Kara
Quoted 15 lines · Jeff Layton
Quoted 8 lines · Jan Kara
Quoted 3 lines · Jeff Layton

This ensures that we see errors on fsync when writeback fails.

Hum, but do we really want to clobber mapping errors with temporary stuff like ENOMEM? Or do you want to handle that in mapping_set_error?

Right now we don't really have such a thing as temporary errors in the writeback codepath. If you return an error here, the data doesn't stay dirty or anything, and I think we want to ensure that that gets reported via fsync.

Quoted 7 lines

I'd like to see us add better handling for retryable errors for stuff like ENOMEM or EAGAIN. I think this is the first step toward that though. Once we have more consistent handling of writeback errors in general, then we can start doing more interesting things with retryable errors.

So yeah, I this is the right thing to do for now.

Quoted 9 lines

OK, fair enough. And question number 2):

Who is actually responsible for setting the error in the mapping when error happens inside ->writepage()? Is it the ->writepage() callback or the caller of ->writepage()? Or something else? Currently it seems to be a strange mix (e.g. mm/page-writeback.c: __writepage() calls mapping_set_error() when ->writepage() returns error) so I'd like to understand what's the plan and have that recorded in the changelogs.

That's an excellent question.

I think we probably want the writepage/launder_page operations to call mapping_set_error. That makes it possible for filesystems (e.g. NFS) to handle their own error tracking and reporting without using the new infrastructure. If they never call mapping_set_error then we'll always just return whatever their ->fsync operation returns on an fsync.

I'll make another pass through the tree and see whether we have some mapping_set_error calls that should be removed, and will flesh out vfs.txt to state this. Maybe that file needs a whole section on writeback error reporting? Hmmm...

That probably also means that I should drop patch 8 from this series (mm: ensure that we set mapping error if writeout fails), since that should be happening in writepage already.

Quoted 25 lines
Quoted 25 lines
Quoted 22 lines
Quoted 22 lines

---
 fs/fuse/file.c | 1 +
 1 file changed, 1 insertion(+)
fs/fuse/file.c +1 -0
index ec238fb5a584..07d0efcb050c 100644
@@ -1669,6 +1669,7 @@ static int fuse_writepage_locked(struct page *page)
 err_free:
 	fuse_request_free(req);
 err:
+	mapping_set_error(page->mapping, error);
 	end_page_writeback(page);
 	return error;
 }
Signature · 1 line
2.9.3
Signature · 1 line
Jeff Layton <[email protected]>
Signature · 1 line
Jeff Layton <[email protected]>
maintainer Reviewed-by
#31 lore raw

Re: [PATCH v3 10/20] fuse: set mapping error in writepage_locked when it fails

Quoted 35 lines · Jeff Layton
Quoted 24 lines · Jan Kara
Quoted 15 lines · Jeff Layton
Quoted 8 lines · Jan Kara
Quoted 3 lines · Jeff Layton

This ensures that we see errors on fsync when writeback fails.

Hum, but do we really want to clobber mapping errors with temporary stuff like ENOMEM? Or do you want to handle that in mapping_set_error?

Right now we don't really have such a thing as temporary errors in the writeback codepath. If you return an error here, the data doesn't stay dirty or anything, and I think we want to ensure that that gets reported via fsync.

Quoted 7 lines

I'd like to see us add better handling for retryable errors for stuff like ENOMEM or EAGAIN. I think this is the first step toward that though. Once we have more consistent handling of writeback errors in general, then we can start doing more interesting things with retryable errors.

So yeah, I this is the right thing to do for now.

Quoted 9 lines

OK, fair enough. And question number 2):

Who is actually responsible for setting the error in the mapping when error happens inside ->writepage()? Is it the ->writepage() callback or the caller of ->writepage()? Or something else? Currently it seems to be a strange mix (e.g. mm/page-writeback.c: __writepage() calls mapping_set_error() when ->writepage() returns error) so I'd like to understand what's the plan and have that recorded in the changelogs.

Quoted 7 lines

That's an excellent question.

I think we probably want the writepage/launder_page operations to call mapping_set_error. That makes it possible for filesystems (e.g. NFS) to handle their own error tracking and reporting without using the new infrastructure. If they never call mapping_set_error then we'll always just return whatever their ->fsync operation returns on an fsync.

OK, makes sense. It is also in line with what you did for DAX, 9p, or here for FUSE. So feel free to add:

for this patch but please also add a sentense that ->writepage() is responsible for calling mapping_set_error() if it fails and page is not redirtied to the changelogs of patches changing writepage handlers.

Quoted 4 lines

I'll make another pass through the tree and see whether we have some mapping_set_error calls that should be removed, and will flesh out vfs.txt to state this. Maybe that file needs a whole section on writeback error reporting? Hmmm...

I think it would be nice to have all the logic described in one place. So +1 from me.

Quoted 3 lines

That probably also means that I should drop patch 8 from this series (mm: ensure that we set mapping error if writeout fails), since that should be happening in writepage already.

Yes.

Honza

Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#32 lore raw

Re: [PATCH v3 10/20] fuse: set mapping error in writepage_locked when it fails

Quoted 61 lines · Jan Kara
Quoted 35 lines · Jeff Layton
Quoted 24 lines · Jan Kara
Quoted 15 lines · Jeff Layton
Quoted 8 lines · Jan Kara
Quoted 3 lines · Jeff Layton

This ensures that we see errors on fsync when writeback fails.

Hum, but do we really want to clobber mapping errors with temporary stuff like ENOMEM? Or do you want to handle that in mapping_set_error?

Right now we don't really have such a thing as temporary errors in the writeback codepath. If you return an error here, the data doesn't stay dirty or anything, and I think we want to ensure that that gets reported via fsync.

Quoted 7 lines

I'd like to see us add better handling for retryable errors for stuff like ENOMEM or EAGAIN. I think this is the first step toward that though. Once we have more consistent handling of writeback errors in general, then we can start doing more interesting things with retryable errors.

So yeah, I this is the right thing to do for now.

Quoted 9 lines

OK, fair enough. And question number 2):

Who is actually responsible for setting the error in the mapping when error happens inside ->writepage()? Is it the ->writepage() callback or the caller of ->writepage()? Or something else? Currently it seems to be a strange mix (e.g. mm/page-writeback.c: __writepage() calls mapping_set_error() when ->writepage() returns error) so I'd like to understand what's the plan and have that recorded in the changelogs.

Quoted 7 lines

That's an excellent question.

I think we probably want the writepage/launder_page operations to call mapping_set_error. That makes it possible for filesystems (e.g. NFS) to handle their own error tracking and reporting without using the new infrastructure. If they never call mapping_set_error then we'll always just return whatever their ->fsync operation returns on an fsync.

OK, makes sense. It is also in line with what you did for DAX, 9p, or here for FUSE. So feel free to add:

for this patch but please also add a sentense that ->writepage() is responsible for calling mapping_set_error() if it fails and page is not redirtied to the changelogs of patches changing writepage handlers.

Quoted 4 lines

I'll make another pass through the tree and see whether we have some mapping_set_error calls that should be removed, and will flesh out vfs.txt to state this. Maybe that file needs a whole section on writeback error reporting? Hmmm...

I think it would be nice to have all the logic described in one place. So +1 from me.

Quoted 7 lines
Quoted 3 lines

That probably also means that I should drop patch 8 from this series (mm: ensure that we set mapping error if writeout fails), since that should be happening in writepage already.

Yes.

Honza

(cc'ing Jon since I'm proposing a doc update)

Here's what I'm thinking for a vfs.txt update after this series. The section on writeback_control could probably be more specific.

----------------------8<-------------------------

Documentation/filesystems/vfs.txt +20 -2
index 94dd27ef4a76..aa912b65792a 100644
@@ -576,7 +576,23 @@ should clear PG_Dirty and set PG_Writeback.  It can be actually
 written at any point after PG_Dirty is clear.  Once it is known to be
 safe, PG_Writeback is cleared.
 
-Writeback makes use of a writeback_control structure...
+Writeback makes use of a writeback_control structure to direct the
+operations. This tells the writepage and writepages operations something
+about the nature of and reason for the writeback request, and the
+constraints under which it is being done. It is also used to track state
+between successive writeback requests.
+
+When there is an error during writeback, then an error should be
+reported to fsync on all file descriptors that were open@the time of
+the error. This is typically done by setting the wb_err value in the
+address_space via mapping_set_error when writeback errors occur. The
+vfs-layer fsync code will then report the errors on a per-fd basis.
+
+Filesystems are free to track errors internally if they choose, but they
+should aim to provide the same semantics for error reporting when there
+are multiple writers. Filesystems that track their own errors should
+avoid calling mapping_set_error in order to ensure that errors stored in
+the mapping aren't improperly reported by the generic filesystem code.
 
 struct address_space_operations
 -------------------------------
@@ -888,7 +904,9 @@ otherwise noted.
 
   release: called when the last reference to an open file is closed
 
-  fsync: called by the fsync(2) system call
+  fsync: called by the fsync(2) system call. Errors that were previously
+	 recorded using mapping_set_error will automatically be returned to
+	 the application and the file's error sequence advanced.
 
   fasync: called by the fcntl(2) system call when asynchronous
 	(non-blocking) mode is enabled for a file
#33 lore raw

PATCH v3 11/20 cifs: set mapping error when page writeback fails in writepage or launder_pages

In reply to Jeff Layton
---
 fs/cifs/file.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
fs/cifs/file.c +6 -4
index 21d404535739..4b696a23b0b1 100644
@@ -2234,14 +2234,16 @@ cifs_writepage_locked(struct page *page, struct writeback_control *wbc)
 	set_page_writeback(page);
 retry_write:
 	rc = cifs_partialpagewrite(page, 0, PAGE_SIZE);
-	if (rc == -EAGAIN && wbc->sync_mode == WB_SYNC_ALL)
+	if (rc == -EAGAIN && wbc->sync_mode == WB_SYNC_ALL) {
 		goto retry_write;
-	else if (rc == -EAGAIN)
+	} else if (rc == -EAGAIN) {
 		redirty_page_for_writepage(wbc, page);
-	else if (rc != 0)
+	} else if (rc != 0) {
 		SetPageError(page);
-	else
+		mapping_set_error(page->mapping, rc);
+	} else {
 		SetPageUptodate(page);
+	}
 	end_page_writeback(page);
 	put_page(page);
 	free_xid(xid);
Signature · 1 line
2.9.3
Reviewed-by on v3 11/20
#34 lore raw

Re: [PATCH v3 11/20] cifs: set mapping error when page writeback fails in writepage or launder_pages

Quoted 13 lines · Jeff Layton
---
 fs/cifs/file.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
fs/cifs/file.c +0 -0
index 21d404535739..4b696a23b0b1 100644
@@ -2234,14 +2234,16 @@ cifs_writepage_locked(struct page *page, struct writeback_control *wbc)
 	set_page_writeback(page);
 retry_write:
 	rc = cifs_partialpagewrite(page, 0, PAGE_SIZE);

fs/cifs/file.c cifs_writepage_locked(struct page *page, struct writeback_control *wbc) · line 2246

Quoted 10 lines
fs/cifs/file.c +6 -0
+	if (rc == -EAGAIN && wbc->sync_mode == WB_SYNC_ALL) {
 		goto retry_write;
+	} else if (rc == -EAGAIN) {
 		redirty_page_for_writepage(wbc, page);
+	} else if (rc != 0) {
 		SetPageError(page);
+		mapping_set_error(page->mapping, rc);
+	} else {
 		SetPageUptodate(page);
+	}

Hmmm. I might be a little too nitpicky, but I hate having the same partial condition duplicated if possible. Why not:

	if (rc == -EAGAIN) {
		if (wbc->sync_mode == WB_SYNC_ALL)
			goto retry_write;
		redirty_page_for_writepage(wbc, page);
	} else if (rc) {
		SetPageError(page);
		mapping_set_error(page->mapping, rc);
	} else {
		SetPageUptodate(page);
	}

Otherwise this looks fine to me:

#35 lore raw

Re: [PATCH v3 11/20] cifs: set mapping error when page writeback fails in writepage or launder_pages

Quoted 39 lines · Christoph Hellwig
Quoted 13 lines · Jeff Layton
---
 fs/cifs/file.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
fs/cifs/file.c +0 -0
index 21d404535739..4b696a23b0b1 100644
@@ -2234,14 +2234,16 @@ cifs_writepage_locked(struct page *page, struct writeback_control *wbc)
 	set_page_writeback(page);
 retry_write:
 	rc = cifs_partialpagewrite(page, 0, PAGE_SIZE);

fs/cifs/file.c cifs_writepage_locked(struct page *page, struct writeback_control *wbc) · line 2246

Quoted 10 lines
fs/cifs/file.c +6 -0
+	if (rc == -EAGAIN && wbc->sync_mode == WB_SYNC_ALL) {
 		goto retry_write;
+	} else if (rc == -EAGAIN) {
 		redirty_page_for_writepage(wbc, page);
+	} else if (rc != 0) {
 		SetPageError(page);
+		mapping_set_error(page->mapping, rc);
+	} else {
 		SetPageUptodate(page);
+	}

Hmmm. I might be a little too nitpicky, but I hate having the same partial condition duplicated if possible. Why not:

	if (rc == -EAGAIN) {
		if (wbc->sync_mode == WB_SYNC_ALL)
			goto retry_write;
		redirty_page_for_writepage(wbc, page);
	} else if (rc) {
		SetPageError(page);
		mapping_set_error(page->mapping, rc);
	} else {
		SetPageUptodate(page);
	}
Quoted 3 lines

Otherwise this looks fine to me:

No, you're absolutely right. I merged that change into the patch.

Thanks for the review so far!

Signature · 1 line
Jeff Layton <[email protected]>
#36 lore raw

PATCH v3 12/20 lib: add errseq_t type and infrastructure for handling it

In reply to Jeff Layton

An errseq_t is a way of recording errors in one place, and allowing any number of "subscribers" to tell whether an error has been set again since a previous time.

It's implemented as an unsigned 32-bit value that is managed with atomic operations. The low order bits are designated to hold an error code (max size of MAX_ERRNO). The upper bits are used as a counter.

The API works with consumers sampling an errseq_t value at a particular point in time. Later, that value can be used to tell whether new errors have been set since that time.

Note that there is a 1 in 512k risk of collisions here if new errors are being recorded frequently, since we have so few bits to use as a counter. To mitigate this, one bit is used as a flag to tell whether the value has been sampled since a new value was recorded. That allows us to avoid bumping the counter if no one has sampled it since it was last bumped.

Later patches will build on this infrastructure to change how writeback errors are tracked in the kernel.

---
 include/linux/errseq.h |  16 ++++
 lib/Makefile           |   2 +-
 lib/errseq.c           | 199 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 216 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/errseq.h
 create mode 100644 lib/errseq.c
include/linux/errseq.h new file +16 -0
new file mode 100644
index 000000000000..e2d374dbf683
@@ -0,0 +1,16 @@
+#ifndef _LINUX_ERRSEQ_H
+#define _LINUX_ERRSEQ_H
+typedef u32	errseq_t;
+
+void __errseq_set(errseq_t *eseq, int err);
+static inline void errseq_set(errseq_t *eseq, int err)
+{
+	/* Optimize for the common case of no error */
+	if (unlikely(err))
+		__errseq_set(eseq, err);
+}
+
+errseq_t errseq_sample(errseq_t *eseq);
+int errseq_check(errseq_t *eseq, errseq_t since);
+int errseq_check_and_advance(errseq_t *eseq, errseq_t *since);
+#endif
lib/Makefile +1 -1
index 320ac46a8725..2423afef40f7 100644
@@ -41,7 +41,7 @@ obj-y += bcd.o div64.o sort.o parser.o debug_locks.o random32.o \
 	 gcd.o lcm.o list_sort.o uuid.o flex_array.o iov_iter.o clz_ctz.o \
 	 bsearch.o find_bit.o llist.o memweight.o kfifo.o \
 	 percpu-refcount.o percpu_ida.o rhashtable.o reciprocal_div.o \
-	 once.o refcount.o
+	 once.o refcount.o errseq.o
 obj-y += string_helpers.o
 obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
 obj-y += hexdump.o
lib/errseq.c new file +199 -0

199 lines not on this page · raw message

Signature · 1 line
2.9.3
#37 lore raw

PATCH v3 13/20 fs: new infrastructure for writeback error handling and reporting

In reply to Jeff Layton

Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc.

The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times.

If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption.

This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store.

In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option.

One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead.

This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value.

This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called).

Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success.

The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this. Later patches will change the existing code to use this new infrastructure.

---
 Documentation/filesystems/vfs.txt | 10 +++++++++-
 fs/open.c                         |  3 +++
 include/linux/fs.h                | 24 ++++++++++++++++++++++++
 mm/filemap.c                      | 38 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 74 insertions(+), 1 deletion(-)
Documentation/filesystems/vfs.txt +9 -1
index 94dd27ef4a76..ed06fb39822b 100644
@@ -576,6 +576,11 @@ should clear PG_Dirty and set PG_Writeback.  It can be actually
 written at any point after PG_Dirty is clear.  Once it is known to be
 safe, PG_Writeback is cleared.
 
+If there is an error during writeback, then the address_space should be
+marked with an error (typically using filemap_set_wb_error), in order to
+ensure that the error can later be reported to the application when an
+fsync is issued.
+
 Writeback makes use of a writeback_control structure...
 
 struct address_space_operations
@@ -888,7 +893,10 @@ otherwise noted.
 
   release: called when the last reference to an open file is closed
 
-  fsync: called by the fsync(2) system call
+  fsync: called by the fsync(2) system call. Filesystems that use the
+	pagecache should call filemap_report_wb_error before returning
+	to ensure that any errors that occurred during writeback are
+	reported and the file's error sequence advanced.
 
   fasync: called by the fcntl(2) system call when asynchronous
 	(non-blocking) mode is enabled for a file
fs/open.c +3 -0
index 949cef29c3bb..88bfed8d3c88 100644
@@ -709,6 +709,9 @@ static int do_dentry_open(struct file *f,
 	f->f_inode = inode;
 	f->f_mapping = inode->i_mapping;
 
+	/* Ensure that we skip any errors that predate opening of the file */
+	f->f_wb_err = filemap_sample_wb_error(f->f_mapping);
+
 	if (unlikely(f->f_flags & O_PATH)) {
 		f->f_mode = FMODE_PATH;
 		f->f_op = &empty_fops;
include/linux/fs.h +24 -0
index 7251f7bb45e8..69a89f667c7f 100644
@@ -31,6 +31,7 @@
 #include <linux/workqueue.h>
 #include <linux/percpu-rwsem.h>
 #include <linux/delayed_call.h>
+#include <linux/errseq.h>
 
 #include <asm/byteorder.h>
 #include <uapi/linux/fs.h>
@@ -394,6 +395,7 @@ struct address_space {
 	gfp_t			gfp_mask;	/* implicit gfp mask for allocations */
 	struct list_head	private_list;	/* ditto */
 	void			*private_data;	/* ditto */
+	errseq_t		wb_err;
 } __attribute__((aligned(sizeof(long))));
 	/*
 	 * On most architectures that alignment is already the case; but
@@ -846,6 +848,7 @@ struct file {
 	 * Must not be taken from IRQ context.
 	 */
 	spinlock_t		f_lock;
+	errseq_t		f_wb_err;
 	atomic_long_t		f_count;
 	unsigned int 		f_flags;
 	fmode_t			f_mode;
@@ -2521,6 +2524,27 @@ extern int __filemap_fdatawrite_range(struct address_space *mapping,
 extern int filemap_fdatawrite_range(struct address_space *mapping,
 				loff_t start, loff_t end);
 extern int filemap_check_errors(struct address_space *mapping);
+extern int __must_check filemap_report_wb_error(struct file *file);
+
+/**
+ * filemap_check_wb_error - has an error occurred since the mark was sampled?
+ * @mapping: mapping to check for writeback errors
+ * @since: previously-sampled errseq_t
+ *
+ * Grab the errseq_t value from the mapping, and see if it has changed "since"
+ * the given value was sampled.
+ *
+ * If it has then report the latest error set, otherwise return 0.
+ */
+static inline int filemap_check_wb_error(struct address_space *mapping, errseq_t since)
+{
+	return errseq_check(&mapping->wb_err, since);
+}
+
+static inline errseq_t filemap_sample_wb_error(struct address_space *mapping)
+{
+	return errseq_sample(&mapping->wb_err);
+}
 
 extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
 			   int datasync);
mm/filemap.c +38 -0
index 1694623a6289..ee1a798acfc1 100644
@@ -546,6 +546,44 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 EXPORT_SYMBOL(filemap_write_and_wait_range);
 
 /**
+ * filemap_report_wb_error - report wb error (if any) that was previously set
+ * @file: struct file on which the error is being reported
+ *
+ * When userland calls fsync (or something like nfsd does the equivalent), we
+ * want to report any writeback errors that occurred since the last fsync (or
+ * since the file was opened if there haven't been any).
+ *
+ * Grab the wb_err from the mapping. If it matches what we have in the file,
+ * then just quickly return 0. The file is all caught up.
+ *
+ * If it doesn't match, then take the mapping value, set the "seen" flag in
+ * it and try to swap it into place. If it works, or another task beat us
+ * to it with the new value, then update the f_wb_err and return the error
+ * portion. The error at this point must be reported via proper channels
+ * (a'la fsync, or NFS COMMIT operation, etc.).
+ *
+ * While we handle mapping->wb_err with atomic operations, the f_wb_err
+ * value is protected by the f_lock since we must ensure that it reflects
+ * the latest value swapped in for this file descriptor.
+ */
+int filemap_report_wb_error(struct file *file)
+{
+	int err = 0;
+	struct address_space *mapping = file->f_mapping;
+
+	/* Locklessly handle the common case where nothing has changed */
+	if (errseq_check(&mapping->wb_err, READ_ONCE(file->f_wb_err))) {
+		/* Something changed, must use slow path */
+		spin_lock(&file->f_lock);
+		err = errseq_check_and_advance(&mapping->wb_err,
+						&file->f_wb_err);
+		spin_unlock(&file->f_lock);
+	}
+	return err;
+}
+EXPORT_SYMBOL(filemap_report_wb_error);
+
+/**
  * replace_page_cache_page - replace a pagecache page with a new one
  * @old:	page to be replaced
  * @new:	page to replace with
Signature · 1 line
2.9.3
#38 lore raw

PATCH v3 14/20 fs: retrofit old error reporting API onto new infrastructure

In reply to Jeff Layton

Now that we have a better way to store and report errors that occur during writeback, we need to convert the existing codebase to use it. We could just adapt all of the filesystem code and related infrastructure to the new API, but that's a lot of churn.

When it comes to setting errors in the mapping, filemap_set_wb_error is a drop-in replacement for mapping_set_error. Turn that function into a simple wrapper around the new one.

Because we want to ensure that writeback errors are always reported at fsync time, inject filemap_report_wb_error calls much closer to the syscall boundary, in call_fsync.

For fsync calls (and things like the nfsd equivalent), we either return the error that the fsync operation returns, or the one returned by filemap_report_wb_error. In both cases, we advance the file->f_wb_err to the latest value. This allows us to provide new fsync semantics that will return errors that may have occurred previously and been viewed via other file descriptors.

The final piece of the puzzle is what to do about filemap_check_errors calls that are being called directly or via filemap_* functions. Here, we must take a little "creative license".

Since we now handle advancing the file->f_wb_err value at the generic filesystem layer, we no longer need those callers to clear errors out of the mapping or advance an errseq_t.

A lot of the existing codebase relies on being getting an error back from those functions when there is a writeback problem, so we do still want to have them report writeback errors somehow.

When reporting writeback errors, we will always report errors that have occurred since a particular point in time. With the old writeback error reporting, the time we used was "since it was last tested/cleared" which is entirely arbitrary and potentially racy. Now, we can at least report the latest error that has occurred since an arbitrary point in time (represented as a sampled errseq_t value).

In the case where we don't have a struct file to work with, this patch just has the wrappers sample the current mapping->wb_err value, and use that as an arbitrary point from which to check for errors.

That's probably not "correct" in all cases, particularly in the case of something like filemap_fdatawait, but I'm not sure it's any worse than what we already have, and this gives us a basis from which to work.

A lot of those callers will likely want to change to a model where they sample the errseq_t much earlier (perhaps when starting a transaction), store it in an appropriate place and then use that value later when checking to see if an error occurred.

That will almost certainly take some involvement from other subsystem maintainers. I'm quite open to adding new API functions to help enable this if that would be helpful, but I don't really want to do that until I better understand what's needed.

---
 Documentation/filesystems/vfs.txt |  9 ++++-----
 fs/btrfs/file.c                   | 10 ++--------
 fs/btrfs/tree-log.c               |  9 ++-------
 fs/f2fs/file.c                    |  3 +++
 fs/f2fs/node.c                    |  6 +-----
 fs/fuse/file.c                    |  7 +++++--
 fs/libfs.c                        |  6 ++++--
 include/linux/fs.h                | 17 ++++++++++-------
 include/linux/pagemap.h           |  8 ++------
 mm/filemap.c                      | 33 +++++++++++----------------------
 10 files changed, 44 insertions(+), 64 deletions(-)
Documentation/filesystems/vfs.txt +4 -5
index ed06fb39822b..f201a77873f7 100644
@@ -577,7 +577,7 @@ written at any point after PG_Dirty is clear.  Once it is known to be
 safe, PG_Writeback is cleared.
 
 If there is an error during writeback, then the address_space should be
-marked with an error (typically using filemap_set_wb_error), in order to
+marked with an error (typically using mapping_set_error), in order to
 ensure that the error can later be reported to the application when an
 fsync is issued.
 
@@ -893,10 +893,9 @@ otherwise noted.
 
   release: called when the last reference to an open file is closed
 
-  fsync: called by the fsync(2) system call. Filesystems that use the
-	pagecache should call filemap_report_wb_error before returning
-	to ensure that any errors that occurred during writeback are
-	reported and the file's error sequence advanced.
+  fsync: called by the fsync(2) system call. Errors that were previously
+	 recorded using mapping_set_error will automatically be returned to
+	 the application and the file's error sequence advanced.
 
   fasync: called by the fcntl(2) system call when asynchronous
 	(non-blocking) mode is enabled for a file
fs/btrfs/file.c +2 -8
index 520cb7230b2d..e15faf240b51 100644
@@ -1962,6 +1962,7 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 	int ret = 0;
 	bool full_sync = 0;
 	u64 len;
+	errseq_t wb_since = READ_ONCE(file->f_wb_err);
 
 	/*
 	 * The range length can be represented by u64, we have to do the typecasts
@@ -2079,14 +2080,7 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 		 */
 		clear_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
 			  &BTRFS_I(inode)->runtime_flags);
-		/*
-		 * An ordered extent might have started before and completed
-		 * already with io errors, in which case the inode was not
-		 * updated and we end up here. So check the inode's mapping
-		 * flags for any errors that might have happened while doing
-		 * writeback of file data.
-		 */
-		ret = filemap_check_errors(inode->i_mapping);
+		ret = filemap_check_wb_error(inode->i_mapping, wb_since);
 		inode_unlock(inode);
 		goto out;
 	}
fs/btrfs/tree-log.c +2 -7
index a59674c3e69e..d0a123dbb199 100644
@@ -3972,12 +3972,6 @@ static int wait_ordered_extents(struct btrfs_trans_handle *trans,
 			    test_bit(BTRFS_ORDERED_IOERR, &ordered->flags)));
 
 		if (test_bit(BTRFS_ORDERED_IOERR, &ordered->flags)) {
-			/*
-			 * Clear the AS_EIO/AS_ENOSPC flags from the inode's
-			 * i_mapping flags, so that the next fsync won't get
-			 * an outdated io error too.
-			 */
-			filemap_check_errors(inode->i_mapping);
 			*ordered_io_error = true;
 			break;
 		}
@@ -4171,6 +4165,7 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans,
 	u64 test_gen;
 	int ret = 0;
 	int num = 0;
+	errseq_t since = filemap_sample_wb_error(inode->vfs_inode.i_mapping);
 
 	INIT_LIST_HEAD(&extents);
 
@@ -4214,7 +4209,7 @@ static int btrfs_log_changed_extents(struct btrfs_trans_handle *trans,
 	 * without writing to the log tree and the fsync must report the
 	 * file data write error and not commit the current transaction.
 	 */
-	ret = filemap_check_errors(inode->vfs_inode.i_mapping);
+	ret = filemap_check_wb_error(inode->vfs_inode.i_mapping, since);
 	if (ret)
 		ctx->io_err = ret;
 process:
fs/f2fs/file.c +3 -0
index 5f7317875a67..7ce13281925f 100644
@@ -187,6 +187,7 @@ static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
 		.nr_to_write = LONG_MAX,
 		.for_reclaim = 0,
 	};
+	errseq_t since = READ_ONCE(file->f_wb_err);
 
 	if (unlikely(f2fs_readonly(inode->i_sb)))
 		return 0;
@@ -265,6 +266,8 @@ static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
 	}
 
 	ret = wait_on_node_pages_writeback(sbi, ino);
+	if (ret == 0)
+		ret = filemap_check_wb_error(NODE_MAPPING(sbi), since);
 	if (ret)
 		goto out;
 
fs/f2fs/node.c +1 -5
index 481aa8dc79f4..b3ef9504fd8b 100644
@@ -1630,7 +1630,7 @@ int wait_on_node_pages_writeback(struct f2fs_sb_info *sbi, nid_t ino)
 {
 	pgoff_t index = 0, end = ULONG_MAX;
 	struct pagevec pvec;
-	int ret2, ret = 0;
+	int ret = 0;
 
 	pagevec_init(&pvec, 0);
 
@@ -1658,10 +1658,6 @@ int wait_on_node_pages_writeback(struct f2fs_sb_info *sbi, nid_t ino)
 		pagevec_release(&pvec);
 		cond_resched();
 	}
-
-	ret2 = filemap_check_errors(NODE_MAPPING(sbi));
-	if (!ret)
-		ret = ret2;
 	return ret;
 }
 
fs/fuse/file.c +5 -2
index 07d0efcb050c..e1ced9cfb090 100644
@@ -398,6 +398,7 @@ static int fuse_flush(struct file *file, fl_owner_t id)
 	struct fuse_req *req;
 	struct fuse_flush_in inarg;
 	int err;
+	errseq_t since = READ_ONCE(file->f_wb_err);
 
 	if (is_bad_inode(inode))
 		return -EIO;
@@ -413,7 +414,7 @@ static int fuse_flush(struct file *file, fl_owner_t id)
 	fuse_sync_writes(inode);
 	inode_unlock(inode);
 
-	err = filemap_check_errors(file->f_mapping);
+	err = filemap_check_wb_error(file->f_mapping, since);
 	if (err)
 		return err;
 
@@ -446,6 +447,7 @@ int fuse_fsync_common(struct file *file, loff_t start, loff_t end,
 	FUSE_ARGS(args);
 	struct fuse_fsync_in inarg;
 	int err;
+	errseq_t since;
 
 	if (is_bad_inode(inode))
 		return -EIO;
@@ -461,6 +463,7 @@ int fuse_fsync_common(struct file *file, loff_t start, loff_t end,
 	if (err)
 		goto out;
 
+	since = READ_ONCE(file->f_wb_err);
 	fuse_sync_writes(inode);
 
 	/*
@@ -468,7 +471,7 @@ int fuse_fsync_common(struct file *file, loff_t start, loff_t end,
 	 * filemap_write_and_wait_range() does not catch errors.
 	 * We have to do this directly after fuse_sync_writes()
 	 */
-	err = filemap_check_errors(file->f_mapping);
+	err = filemap_check_wb_error(file->f_mapping, since);
 	if (err)
 		goto out;
 
fs/libfs.c +4 -2
index 12a48ee442d3..23319d74fa42 100644
@@ -991,8 +991,10 @@ int __generic_file_fsync(struct file *file, loff_t start, loff_t end,
 
 out:
 	inode_unlock(inode);
-	err = filemap_check_errors(inode->i_mapping);
-	return ret ? : err;
+	if (!ret)
+		ret = filemap_check_wb_error(inode->i_mapping,
+						READ_ONCE(file->f_wb_err));
+	return ret;
 }
 EXPORT_SYMBOL(__generic_file_fsync);
 
include/linux/fs.h +10 -7
index 69a89f667c7f..ca185f026258 100644
@@ -1741,12 +1741,6 @@ static inline int call_mmap(struct file *file, struct vm_area_struct *vma)
 	return file->f_op->mmap(file, vma);
 }
 
-static inline int call_fsync(struct file *file, loff_t start, loff_t end,
-			     int datasync)
-{
-	return file->f_op->fsync(file, start, end, datasync);
-}
-
 ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
 			      unsigned long nr_segs, unsigned long fast_segs,
 			      struct iovec *fast_pointer,
@@ -2523,7 +2517,6 @@ extern int __filemap_fdatawrite_range(struct address_space *mapping,
 				loff_t start, loff_t end, int sync_mode);
 extern int filemap_fdatawrite_range(struct address_space *mapping,
 				loff_t start, loff_t end);
-extern int filemap_check_errors(struct address_space *mapping);
 extern int __must_check filemap_report_wb_error(struct file *file);
 
 /**
@@ -2546,6 +2539,16 @@ static inline errseq_t filemap_sample_wb_error(struct address_space *mapping)
 	return errseq_sample(&mapping->wb_err);
 }
 
+static inline int call_fsync(struct file *file, loff_t start, loff_t end,
+			     int datasync)
+{
+	int ret, ret2;
+
+	ret = file->f_op->fsync(file, start, end, datasync);
+	ret2 = filemap_report_wb_error(file);
+	return ret ? : ret2;
+}
+
 extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
 			   int datasync);
 extern int vfs_fsync(struct file *file, int datasync);
include/linux/pagemap.h +2 -6
index 84943e8057ef..32512ffc15fa 100644
@@ -14,6 +14,7 @@
 #include <linux/bitops.h>
 #include <linux/hardirq.h> /* for in_interrupt() */
 #include <linux/hugetlb_inline.h>
+#include <linux/errseq.h>
 
 /*
  * Bits in mapping->flags.
@@ -30,12 +31,7 @@ enum mapping_flags {
 
 static inline void mapping_set_error(struct address_space *mapping, int error)
 {
-	if (unlikely(error)) {
-		if (error == -ENOSPC)
-			set_bit(AS_ENOSPC, &mapping->flags);
-		else
-			set_bit(AS_EIO, &mapping->flags);
-	}
+	return errseq_set(&mapping->wb_err, error);
 }
 
 static inline void mapping_set_unevictable(struct address_space *mapping)
mm/filemap.c +11 -22
index ee1a798acfc1..d94a76d4e023 100644
@@ -36,6 +36,7 @@
 #include <linux/memcontrol.h>
 #include <linux/cleancache.h>
 #include <linux/rmap.h>
+#include <linux/errseq.h>
 #include "internal.h"
 
 #define CREATE_TRACE_POINTS
@@ -295,20 +296,6 @@ void delete_from_page_cache(struct page *page)
 }
 EXPORT_SYMBOL(delete_from_page_cache);
 
-int filemap_check_errors(struct address_space *mapping)
-{
-	int ret = 0;
-	/* Check for outstanding write errors */
-	if (test_bit(AS_ENOSPC, &mapping->flags) &&
-	    test_and_clear_bit(AS_ENOSPC, &mapping->flags))
-		ret = -ENOSPC;
-	if (test_bit(AS_EIO, &mapping->flags) &&
-	    test_and_clear_bit(AS_EIO, &mapping->flags))
-		ret = -EIO;
-	return ret;
-}
-EXPORT_SYMBOL(filemap_check_errors);
-
 /**
  * __filemap_fdatawrite_range - start writeback on mapping dirty pages in range
  * @mapping:	address space structure to write
@@ -431,9 +418,10 @@ int filemap_fdatawait_range(struct address_space *mapping, loff_t start_byte,
 			    loff_t end_byte)
 {
 	int ret, ret2;
+	errseq_t since = filemap_sample_wb_error(mapping);
 
 	ret = __filemap_fdatawait_range(mapping, start_byte, end_byte);
-	ret2 = filemap_check_errors(mapping);
+	ret2 = filemap_check_wb_error(mapping, since);
 	if (!ret)
 		ret = ret2;
 
@@ -489,6 +477,7 @@ EXPORT_SYMBOL(filemap_fdatawait);
 int filemap_write_and_wait(struct address_space *mapping)
 {
 	int err = 0;
+	errseq_t since = filemap_sample_wb_error(mapping);
 
 	if ((!dax_mapping(mapping) && mapping->nrpages) ||
 	    (dax_mapping(mapping) && mapping->nrexceptional)) {
@@ -500,12 +489,12 @@ int filemap_write_and_wait(struct address_space *mapping)
 		 * thing (e.g. bug) happened, so we avoid waiting for it.
 		 */
 		if (err != -EIO) {
-			int err2 = filemap_fdatawait(mapping);
+			filemap_fdatawait_keep_errors(mapping);
 			if (!err)
-				err = err2;
+				err = filemap_check_wb_error(mapping, since);
 		}
 	} else {
-		err = filemap_check_errors(mapping);
+		err = filemap_check_wb_error(mapping, since);
 	}
 	return err;
 }
@@ -526,6 +515,7 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 				 loff_t lstart, loff_t lend)
 {
 	int err = 0;
+	errseq_t since = filemap_sample_wb_error(mapping);
 
 	if ((!dax_mapping(mapping) && mapping->nrpages) ||
 	    (dax_mapping(mapping) && mapping->nrexceptional)) {
@@ -533,13 +523,12 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 						 WB_SYNC_ALL);
 		/* See comment of filemap_write_and_wait() */
 		if (err != -EIO) {
-			int err2 = filemap_fdatawait_range(mapping,
-						lstart, lend);
+			__filemap_fdatawait_range(mapping, lstart, lend);
 			if (!err)
-				err = err2;
+				err = filemap_check_wb_error(mapping, since);
 		}
 	} else {
-		err = filemap_check_errors(mapping);
+		err = filemap_check_wb_error(mapping, since);
 	}
 	return err;
 }
Signature · 1 line
2.9.3
#39 lore raw

PATCH v3 15/20 mm: remove AS_EIO and AS_ENOSPC flags

In reply to Jeff Layton

They're no longer used.

---
 include/linux/pagemap.h | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
include/linux/pagemap.h +4 -6
index 32512ffc15fa..9593eac41499 100644
@@ -20,13 +20,11 @@
  * Bits in mapping->flags.
  */
 enum mapping_flags {
-	AS_EIO		= 0,	/* IO error on async write */
-	AS_ENOSPC	= 1,	/* ENOSPC on async write */
-	AS_MM_ALL_LOCKS	= 2,	/* under mm_take_all_locks() */
-	AS_UNEVICTABLE	= 3,	/* e.g., ramdisk, SHM_LOCK */
-	AS_EXITING	= 4, 	/* final truncate in progress */
+	AS_MM_ALL_LOCKS	= 0,	/* under mm_take_all_locks() */
+	AS_UNEVICTABLE	= 1,	/* e.g., ramdisk, SHM_LOCK */
+	AS_EXITING	= 2, 	/* final truncate in progress */
 	/* writeback related tags are not used */
-	AS_NO_WRITEBACK_TAGS = 5,
+	AS_NO_WRITEBACK_TAGS = 3,
 };
 
 static inline void mapping_set_error(struct address_space *mapping, int error)
Signature · 1 line
2.9.3
#40 lore raw

PATCH v3 16/20 mm: don't TestClearPageError in __filemap_fdatawait_range

In reply to Jeff Layton

The -EIO returned here can end up overriding whatever error is marked in the address space, and be returned at fsync time, even when there is a more appropriate error stored in the mapping.

Read errors are also sometimes tracked on a per-page level using PG_error. Suppose we have a read error on a page, and then that page is subsequently dirtied by overwriting the whole page. Writeback doesn't clear PG_error, so we can then end up successfully writing back that page and still return -EIO on fsync.

Worse yet, PG_error is cleared during a sync() syscall, but the -EIO return from that is silently discarded. Any subsystem that is relying on PG_error to report errors during fsync can easily lose writeback errors due to this. All you need is a stray sync() call on the box at the wrong time and you've lost the error.

Since the handling of the PG_error flag is somewhat inconsistent across subsystems, let's just rely on marking the address space when there are writeback errors. Change the TestClearPageError call to ClearPageError, and make __filemap_fdatawait_range a void return function.

---
 mm/filemap.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)
mm/filemap.c +5 -14
index d94a76d4e023..47e7f50fb830 100644
@@ -363,17 +363,16 @@ int filemap_flush(struct address_space *mapping)
 }
 EXPORT_SYMBOL(filemap_flush);
 
-static int __filemap_fdatawait_range(struct address_space *mapping,
+static void __filemap_fdatawait_range(struct address_space *mapping,
 				     loff_t start_byte, loff_t end_byte)
 {
 	pgoff_t index = start_byte >> PAGE_SHIFT;
 	pgoff_t end = end_byte >> PAGE_SHIFT;
 	struct pagevec pvec;
 	int nr_pages;
-	int ret = 0;
 
 	if (end_byte < start_byte)
-		goto out;
+		return;
 
 	pagevec_init(&pvec, 0);
 	while ((index <= end) &&
@@ -390,14 +389,11 @@ static int __filemap_fdatawait_range(struct address_space *mapping,
 				continue;
 
 			wait_on_page_writeback(page);
-			if (TestClearPageError(page))
-				ret = -EIO;
+			ClearPageError(page);
 		}
 		pagevec_release(&pvec);
 		cond_resched();
 	}
-out:
-	return ret;
 }
 
 /**
@@ -417,15 +413,10 @@ static int __filemap_fdatawait_range(struct address_space *mapping,
 int filemap_fdatawait_range(struct address_space *mapping, loff_t start_byte,
 			    loff_t end_byte)
 {
-	int ret, ret2;
 	errseq_t since = filemap_sample_wb_error(mapping);
 
-	ret = __filemap_fdatawait_range(mapping, start_byte, end_byte);
-	ret2 = filemap_check_wb_error(mapping, since);
-	if (!ret)
-		ret = ret2;
-
-	return ret;
+	__filemap_fdatawait_range(mapping, start_byte, end_byte);
+	return filemap_check_wb_error(mapping, since);
 }
 EXPORT_SYMBOL(filemap_fdatawait_range);
 
Signature · 1 line
2.9.3
#41 lore raw

PATCH v3 17/20 cifs: cleanup writeback handling errors and comments

In reply to Jeff Layton

Now that writeback errors are handled on a per-file basis using the new sequence counter method at the vfs layer, we no longer need to re-set errors in the mapping after doing writeback in non-fsync codepaths.

Also, fix up some bogus comments.

---
 fs/cifs/cifsfs.c |  4 +---
 fs/cifs/file.c   |  7 ++-----
 fs/cifs/inode.c  | 22 +++++++---------------
 3 files changed, 10 insertions(+), 23 deletions(-)
fs/cifs/cifsfs.c +1 -3
index dd3f5fabfdf6..017a2d1d02c7 100644
@@ -829,10 +829,8 @@ static loff_t cifs_llseek(struct file *file, loff_t offset, int whence)
 		if (!CIFS_CACHE_READ(CIFS_I(inode)) && inode->i_mapping &&
 		    inode->i_mapping->nrpages != 0) {
 			rc = filemap_fdatawait(inode->i_mapping);
-			if (rc) {
-				mapping_set_error(inode->i_mapping, rc);
+			if (rc)
 				return rc;
-			}
 		}
 		/*
 		 * Some applications poll for the file length in this strange
fs/cifs/file.c +2 -5
index 4b696a23b0b1..9b4f7f182add 100644
@@ -722,9 +722,7 @@ cifs_reopen_file(struct cifsFileInfo *cfile, bool can_flush)
 	cinode = CIFS_I(inode);
 
 	if (can_flush) {
-		rc = filemap_write_and_wait(inode->i_mapping);
-		mapping_set_error(inode->i_mapping, rc);
-
+		filemap_write_and_wait(inode->i_mapping);
 		if (tcon->unix_ext)
 			rc = cifs_get_inode_info_unix(&inode, full_path,
 						      inode->i_sb, xid);
@@ -3906,8 +3904,7 @@ void cifs_oplock_break(struct work_struct *work)
 			break_lease(inode, O_WRONLY);
 		rc = filemap_fdatawrite(inode->i_mapping);
 		if (!CIFS_CACHE_READ(cinode)) {
-			rc = filemap_fdatawait(inode->i_mapping);
-			mapping_set_error(inode->i_mapping, rc);
+			filemap_fdatawait(inode->i_mapping);
 			cifs_zap_mapping(inode);
 		}
 		cifs_dbg(FYI, "Oplock flush inode %p rc %d\n", inode, rc);
fs/cifs/inode.c +7 -15
index b261db34103c..a58e605240fc 100644
@@ -2008,10 +2008,8 @@ int cifs_getattr(const struct path *path, struct kstat *stat,
 	if (!CIFS_CACHE_READ(CIFS_I(inode)) && inode->i_mapping &&
 	    inode->i_mapping->nrpages != 0) {
 		rc = filemap_fdatawait(inode->i_mapping);
-		if (rc) {
-			mapping_set_error(inode->i_mapping, rc);
+		if (rc)
 			return rc;
-		}
 	}
 
 	rc = cifs_revalidate_dentry_attr(dentry);
@@ -2171,15 +2169,12 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs)
 	 * Attempt to flush data before changing attributes. We need to do
 	 * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
 	 * ownership or mode then we may also need to do this. Here, we take
-	 * the safe way out and just do the flush on all setattr requests. If
-	 * the flush returns error, store it to report later and continue.
+	 * the safe way out and just do the flush on all setattr requests.
 	 *
 	 * BB: This should be smarter. Why bother flushing pages that
-	 * will be truncated anyway? Also, should we error out here if
-	 * the flush returns error?
+	 * will be truncated anyway?
 	 */
-	rc = filemap_write_and_wait(inode->i_mapping);
-	mapping_set_error(inode->i_mapping, rc);
+	filemap_write_and_wait(inode->i_mapping);
 	rc = 0;
 
 	if (attrs->ia_valid & ATTR_SIZE) {
@@ -2314,15 +2309,12 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
 	 * Attempt to flush data before changing attributes. We need to do
 	 * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
 	 * ownership or mode then we may also need to do this. Here, we take
-	 * the safe way out and just do the flush on all setattr requests. If
-	 * the flush returns error, store it to report later and continue.
+	 * the safe way out and just do the flush on all setattr requests.
 	 *
 	 * BB: This should be smarter. Why bother flushing pages that
-	 * will be truncated anyway? Also, should we error out here if
-	 * the flush returns error?
+	 * will be truncated anyway?
 	 */
-	rc = filemap_write_and_wait(inode->i_mapping);
-	mapping_set_error(inode->i_mapping, rc);
+	filemap_write_and_wait(inode->i_mapping);
 	rc = 0;
 
 	if (attrs->ia_valid & ATTR_SIZE) {
Signature · 1 line
2.9.3
#42 lore raw

PATCH v3 18/20 mm: clean up error handling in write_one_page

In reply to Jeff Layton

Don't try to check PageError since that's potentially racy and not necessarily going to be set after writepage errors out.

Instead, sample the mapping error early on, and use that value to tell us whether we got a writeback error since then.

---
 mm/page-writeback.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
mm/page-writeback.c +5 -6
index de0dbf12e2c1..1643456881b4 100644
@@ -2373,11 +2373,12 @@ int do_writepages(struct address_space *mapping, struct writeback_control *wbc)
 int write_one_page(struct page *page)
 {
 	struct address_space *mapping = page->mapping;
-	int ret = 0;
+	int ret = 0, ret2;
 	struct writeback_control wbc = {
 		.sync_mode = WB_SYNC_ALL,
 		.nr_to_write = 1,
 	};
+	errseq_t since = filemap_sample_wb_error(mapping);
 
 	BUG_ON(!PageLocked(page));
 
@@ -2386,16 +2387,14 @@ int write_one_page(struct page *page)
 	if (clear_page_dirty_for_io(page)) {
 		get_page(page);
 		ret = mapping->a_ops->writepage(page, &wbc);
-		if (ret == 0) {
+		if (ret == 0)
 			wait_on_page_writeback(page);
-			if (PageError(page))
-				ret = -EIO;
-		}
 		put_page(page);
 	} else {
 		unlock_page(page);
 	}
-	return ret;
+	ret2 = filemap_check_wb_error(mapping, since);
+	return ret ? : ret2;
 }
 EXPORT_SYMBOL(write_one_page);
 
Signature · 1 line
2.9.3
#43 lore raw

PATCH v3 19/20 jbd2: don't reset error in journal_finish_inode_data_buffers

In reply to Jeff Layton

Now that we don't clear writeback errors after fetching them, there is no need to reset them. This is also potentially racy.

---
 fs/jbd2/commit.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
fs/jbd2/commit.c +2 -11
index b6b194ec1b4f..4c6262652028 100644
@@ -264,17 +264,8 @@ static int journal_finish_inode_data_buffers(journal_t *journal,
 		jinode->i_flags |= JI_COMMIT_RUNNING;
 		spin_unlock(&journal->j_list_lock);
 		err = filemap_fdatawait(jinode->i_vfs_inode->i_mapping);
-		if (err) {
-			/*
-			 * Because AS_EIO is cleared by
-			 * filemap_fdatawait_range(), set it again so
-			 * that user process can get -EIO from fsync().
-			 */
-			mapping_set_error(jinode->i_vfs_inode->i_mapping, -EIO);
-
-			if (!ret)
-				ret = err;
-		}
+		if (err && !ret)
+			ret = err;
 		spin_lock(&journal->j_list_lock);
 		jinode->i_flags &= ~JI_COMMIT_RUNNING;
 		smp_mb();
Signature · 1 line
2.9.3
#44 lore raw

PATCH v3 20/20 gfs2: clean up some filemap_* calls

In reply to Jeff Layton

In some places, it's trying to reset the mapping error after calling filemap_fdatawait. That's no longer required. Also, turn several filemap_fdatawrite+filemap_fdatawait calls into filemap_write_and_wait. That will at least return writeback errors that occur during the write phase.

---
 fs/gfs2/glops.c | 12 ++++--------
 fs/gfs2/lops.c  |  4 +---
 fs/gfs2/super.c |  6 ++----
 3 files changed, 7 insertions(+), 15 deletions(-)
fs/gfs2/glops.c +4 -8
index 5db59d444838..7362d19fdc4c 100644
@@ -158,9 +158,7 @@ static void rgrp_go_sync(struct gfs2_glock *gl)
 	GLOCK_BUG_ON(gl, gl->gl_state != LM_ST_EXCLUSIVE);
 
 	gfs2_log_flush(sdp, gl, NORMAL_FLUSH);
-	filemap_fdatawrite_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
-	error = filemap_fdatawait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
-	mapping_set_error(mapping, error);
+	filemap_write_and_wait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
 	gfs2_ail_empty_gl(gl);
 
 	spin_lock(&gl->gl_lockref.lock);
@@ -225,12 +223,10 @@ static void inode_go_sync(struct gfs2_glock *gl)
 	filemap_fdatawrite(metamapping);
 	if (ip) {
 		struct address_space *mapping = ip->i_inode.i_mapping;
-		filemap_fdatawrite(mapping);
-		error = filemap_fdatawait(mapping);
-		mapping_set_error(mapping, error);
+		filemap_write_and_wait(mapping);
+	} else {
+		filemap_fdatawait(metamapping);
 	}
-	error = filemap_fdatawait(metamapping);
-	mapping_set_error(metamapping, error);
 	gfs2_ail_empty_gl(gl);
 	/*
 	 * Writeback of the data mapping may cause the dirty flag to be set
fs/gfs2/lops.c +1 -3
index b1f9144b42c7..565ce33dec9b 100644
@@ -586,9 +586,7 @@ static void gfs2_meta_sync(struct gfs2_glock *gl)
 	if (mapping == NULL)
 		mapping = &sdp->sd_aspace;
 
-	filemap_fdatawrite(mapping);
-	error = filemap_fdatawait(mapping);
-
+	error = filemap_write_and_wait(mapping);
 	if (error)
 		gfs2_io_error(gl->gl_name.ln_sbd);
 }
fs/gfs2/super.c +2 -4
index 361796a84fce..675c39566ea1 100644
@@ -1593,10 +1593,8 @@ static void gfs2_evict_inode(struct inode *inode)
 out_truncate:
 	gfs2_log_flush(sdp, ip->i_gl, NORMAL_FLUSH);
 	metamapping = gfs2_glock2aspace(ip->i_gl);
-	if (test_bit(GLF_DIRTY, &ip->i_gl->gl_flags)) {
-		filemap_fdatawrite(metamapping);
-		filemap_fdatawait(metamapping);
-	}
+	if (test_bit(GLF_DIRTY, &ip->i_gl->gl_flags))
+		filemap_write_and_wait(metamapping);
 	write_inode_now(inode, 1);
 	gfs2_ail_flush(ip->i_gl, 0);
 
Signature · 1 line
2.9.3
#45 lore raw

Re: [PATCH v3 20/20] gfs2: clean up some filemap_* calls

----- Original Message -----

| In some places, it's trying to reset the mapping error after calling
| filemap_fdatawait. That's no longer required. Also, turn several
| filemap_fdatawrite+filemap_fdatawait calls into filemap_write_and_wait.
| That will at least return writeback errors that occur during the write
| phase.
| 
| Signed-off-by: Jeff Layton <[email protected]>
| ---
|  fs/gfs2/glops.c | 12 ++++--------
|  fs/gfs2/lops.c  |  4 +---
|  fs/gfs2/super.c |  6 ++----
|  3 files changed, 7 insertions(+), 15 deletions(-)
| 
| diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
| index 5db59d444838..7362d19fdc4c 100644
| --- a/fs/gfs2/glops.c
| +++ b/fs/gfs2/glops.c
| @@ -158,9 +158,7 @@ static void rgrp_go_sync(struct gfs2_glock *gl)
|  	GLOCK_BUG_ON(gl, gl->gl_state != LM_ST_EXCLUSIVE);
|  
|  	gfs2_log_flush(sdp, gl, NORMAL_FLUSH);
| -	filemap_fdatawrite_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
| -	error = filemap_fdatawait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
| -	mapping_set_error(mapping, error);
| +	filemap_write_and_wait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);

This should probably have "error = ", no?

|  	gfs2_ail_empty_gl(gl);
|  
|  	spin_lock(&gl->gl_lockref.lock);
| @@ -225,12 +223,10 @@ static void inode_go_sync(struct gfs2_glock *gl)
|  	filemap_fdatawrite(metamapping);
|  	if (ip) {
|  		struct address_space *mapping = ip->i_inode.i_mapping;
| -		filemap_fdatawrite(mapping);
| -		error = filemap_fdatawait(mapping);
| -		mapping_set_error(mapping, error);
| +		filemap_write_and_wait(mapping);
| +	} else {
| +		filemap_fdatawait(metamapping);
|  	}
| -	error = filemap_fdatawait(metamapping);
| -	mapping_set_error(metamapping, error);

This part doesn't look right at all. There's a big difference in gfs2 between mapping and metamapping. We need to wait for metamapping regardless.

(snip)

Regards,

Bob Peterson
Red Hat File Systems

#46 lore raw

Re: [PATCH v3 20/20] gfs2: clean up some filemap_* calls

Quoted 21 lines · Bob Peterson

----- Original Message -----

Quoted 20 lines

In some places, it's trying to reset the mapping error after calling filemap_fdatawait. That's no longer required. Also, turn several filemap_fdatawrite+filemap_fdatawait calls into filemap_write_and_wait. That will at least return writeback errors that occur during the write phase.

---
 fs/gfs2/glops.c | 12 ++++--------
 fs/gfs2/lops.c  |  4 +---
 fs/gfs2/super.c |  6 ++----
 3 files changed, 7 insertions(+), 15 deletions(-)
fs/gfs2/glops.c +0 -0
index 5db59d444838..7362d19fdc4c 100644
@@ -158,9 +158,7 @@ static void rgrp_go_sync(struct gfs2_glock *gl)
 	GLOCK_BUG_ON(gl, gl->gl_state != LM_ST_EXCLUSIVE);
 
Quoted 8 lines

fs/gfs2/glops.c static void rgrp_go_sync(struct gfs2_glock *gl) · line 161

Quoted 5 lines
fs/gfs2/glops.c +1 -3
 	gfs2_log_flush(sdp, gl, NORMAL_FLUSH);
-	filemap_fdatawrite_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
-	error = filemap_fdatawait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
-	mapping_set_error(mapping, error);
+	filemap_write_and_wait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);

This should probably have "error = ", no?

This error is discarded in the current code after resetting the error in the mapping. With the earlier patches in this set we don't need to reset the error like this anymore.

Now, if this code should doing something else with those errors, then that's a separate problem.

Quoted 11 lines
Quoted 11 lines
fs/gfs2/glops.c +1 -3
 	gfs2_ail_empty_gl(gl);
 
 	spin_lock(&gl->gl_lockref.lock);
@@ -225,12 +223,10 @@ static void inode_go_sync(struct gfs2_glock *gl)
 	filemap_fdatawrite(metamapping);
 	if (ip) {
 		struct address_space *mapping = ip->i_inode.i_mapping;
-		filemap_fdatawrite(mapping);
-		error = filemap_fdatawait(mapping);
-		mapping_set_error(mapping, error);
+		filemap_write_and_wait(mapping);
Quoted 9 lines

fs/gfs2/glops.c static void inode_go_sync(struct gfs2_glock *gl) · line 233

Quoted 5 lines
fs/gfs2/glops.c +2 -2
+	} else {
+		filemap_fdatawait(metamapping);
 	}
-	error = filemap_fdatawait(metamapping);
-	mapping_set_error(metamapping, error);

This part doesn't look right at all. There's a big difference in gfs2 between mapping and metamapping. We need to wait for metamapping regardless.

...and this should wait. Basically, filemap_write_and_wait does filemap_fdatawrite and then filemap_fdatawait. This is mostly just replacing the existing code with a more concise helper.

Signature · 1 line
Jeff Layton <[email protected]>
#47 lore raw

Re: [PATCH v3 20/20] gfs2: clean up some filemap_* calls

Hi,

----- Original Message -----

| On Mon, 2017-04-24 at 10:12 -0400, Bob Peterson wrote:
| > > +	filemap_write_and_wait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);
| > 
| > This should probably have "error = ", no?
| > 
| 
| This error is discarded in the current code after resetting the error in
| the mapping. With the earlier patches in this set we don't need to reset
| the error like this anymore.
| 
| Now, if this code should doing something else with those errors, then
| that's a separate problem.

Okay, I see. My bad.

| > >  	gfs2_ail_empty_gl(gl);
| > >  
| > >  	spin_lock(&gl->gl_lockref.lock);
| > > @@ -225,12 +223,10 @@ static void inode_go_sync(struct gfs2_glock *gl)
| > >  	filemap_fdatawrite(metamapping);
| > >  	if (ip) {
| > >  		struct address_space *mapping = ip->i_inode.i_mapping;
| > > -		filemap_fdatawrite(mapping);
| > > -		error = filemap_fdatawait(mapping);
| > > -		mapping_set_error(mapping, error);
| > > +		filemap_write_and_wait(mapping);
| > > +	} else {
| > > +		filemap_fdatawait(metamapping);
| > >  	}
| > > -	error = filemap_fdatawait(metamapping);
| > > -	mapping_set_error(metamapping, error);
| > 
| > This part doesn't look right at all. There's a big difference in gfs2
| > between
| > mapping and metamapping. We need to wait for metamapping regardless.
| > 
| 
| ...and this should wait. Basically, filemap_write_and_wait does
| filemap_fdatawrite and then filemap_fdatawait. This is mostly just
| replacing the existing code with a more concise helper.

But this isn't a simple replacement with a helper. This is two different address spaces (mapping and metamapping) and you added an else in there.

So with this patch metamapping gets written, and if there's an ip, mapping gets written but it doesn't wait for metamapping. Unless I'm missing something.

You could replace both filemap_fdatawrites with the helper instead. Today's code is structured as:

(a) write metamapping
if (ip)
(b) write mapping
(c) wait for mapping
(d) wait for metamapping

If you use the helper for both, it becomes, (a & d)(b & c) which is probably acceptable. (I think we just tried to optimize what the elevator was doing).

But the way you've got it coded here still looks wrong. It looks like:
(a)
if (ip)
(b & c)
ELSE -
(d)

So (d) (metamapping) isn't guaranteed to be synced at the end of the function. Of course, you know the modified helper functions better than I do. What am I missing?

Regards,

Bob Peterson
Red Hat File Systems

#48 lore raw

Re: [PATCH v3 20/20] gfs2: clean up some filemap_* calls

Quoted 70 lines · Bob Peterson

Hi,

----- Original Message -----

Quoted 6 lines · Bob Peterson
Quoted 4 lines

fs/gfs2/glops.c static void rgrp_go_sync(struct gfs2_glock *gl) · line 161

Quoted 1 line
fs/gfs2/glops.c +1 -0
+	filemap_write_and_wait_range(mapping, gl->gl_vm.start, gl->gl_vm.end);

This should probably have "error = ", no?

Quoted 6 lines

This error is discarded in the current code after resetting the error in the mapping. With the earlier patches in this set we don't need to reset the error like this anymore.

Now, if this code should doing something else with those errors, then that's a separate problem.

Okay, I see. My bad.

Quoted 22 lines
Quoted 12 lines
Quoted 12 lines
fs/gfs2/glops.c +2 -3
 	gfs2_ail_empty_gl(gl);
 
 	spin_lock(&gl->gl_lockref.lock);
@@ -225,12 +223,10 @@ static void inode_go_sync(struct gfs2_glock *gl)
 	filemap_fdatawrite(metamapping);
 	if (ip) {
 		struct address_space *mapping = ip->i_inode.i_mapping;
-		filemap_fdatawrite(mapping);
-		error = filemap_fdatawait(mapping);
-		mapping_set_error(mapping, error);
+		filemap_write_and_wait(mapping);
+	} else {
Quoted 9 lines

fs/gfs2/glops.c static void inode_go_sync(struct gfs2_glock *gl) · line 233

Quoted 4 lines
fs/gfs2/glops.c +1 -2
+		filemap_fdatawait(metamapping);
 	}
-	error = filemap_fdatawait(metamapping);
-	mapping_set_error(metamapping, error);

This part doesn't look right at all. There's a big difference in gfs2 between
mapping and metamapping. We need to wait for metamapping regardless.

Quoted 3 lines

...and this should wait. Basically, filemap_write_and_wait does filemap_fdatawrite and then filemap_fdatawait. This is mostly just replacing the existing code with a more concise helper.

But this isn't a simple replacement with a helper. This is two different address spaces (mapping and metamapping) and you added an else in there.

So with this patch metamapping gets written, and if there's an ip, mapping gets written but it doesn't wait for metamapping. Unless I'm missing something.

You could replace both filemap_fdatawrites with the helper instead. Today's code is structured as:

(a) write metamapping
if (ip)
(b) write mapping
(c) wait for mapping
(d) wait for metamapping

If you use the helper for both, it becomes, (a & d)(b & c) which is probably acceptable. (I think we just tried to optimize what the elevator was doing).

But the way you've got it coded here still looks wrong. It looks like:
(a)
if (ip)
(b & c)
ELSE -
(d)

Quoted 5 lines

So (d) (metamapping) isn't guaranteed to be synced at the end of the function. Of course, you know the modified helper functions better than I do. What am I missing?

<facepalm>
You're right of course. I'll fix that up in my tree.

Thanks!

Signature · 1 line
Jeff Layton <[email protected]>