Skip to contentSkip to conversation

add byte-based block_status driver callbacks

PATCH Superseded Eric Blake 2 participants 26 messages Dec 1, 2017 – Dec 6, 2017 Block layer

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Eric Blake

author
#0 lore raw

v5 cover add byte-based block_status driver callbacks

There are patches floating around to add NBD_CMD_BLOCK_STATUS, but NBD wants to report status on byte granularity (even if the reporting will probably be naturally aligned to sectors or even much higher levels). I've therefore started the task of converting our block status code to report at a byte granularity rather than sectors.

These patches have been around for a while, but it's time to finish it now that 2.12 is nearly open for patches.

The overall conversion currently looks like:
part 1: bdrv_is_allocated (merged, commit 51b0a488, 2.10) part 2: dirty-bitmap (merged, commit ca759622, 2.11) part 3: bdrv_get_block_status (merged, commit f0a9c18f, 2.11) part 4: .bdrv_co_block_status (this series, v4 was here [1])

[1] https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg02940.html

Available as a tag at:
git fetch git://repo.or.cz/qemu/ericb.git nbd-byte-callback-v5

Since v4:
- rebase to master
- fix several bugs found by Vladimir
- drop some redundant code
- assert that the drivers make progress (returning success must have a non-zero value stored in *pnum)

001/20:[0009] [FC] 'block: Add .bdrv_co_block_status() callback' 002/20:[----] [-C] 'block: Switch passthrough drivers to .bdrv_co_block_status()' 003/20:[0019] [FC] 'file-posix: Switch to .bdrv_co_block_status()' 004/20:[0019] [FC] 'gluster: Switch to .bdrv_co_block_status()' 005/20:[----] [--] 'iscsi: Switch cluster_sectors to byte-based' 006/20:[----] [--] 'iscsi: Switch iscsi_allocmap_update() to byte-based' 007/20:[0005] [FC] 'iscsi: Switch to .bdrv_co_block_status()' 008/20:[0002] [FC] 'null: Switch to .bdrv_co_block_status()' 009/20:[----] [-C] 'parallels: Switch to .bdrv_co_block_status()' 010/20:[----] [--] 'qcow: Switch to .bdrv_co_block_status()' 011/20:[----] [--] 'qcow2: Switch to .bdrv_co_block_status()' 012/20:[0002] [FC] 'qed: Switch to .bdrv_co_block_status()' 013/20:[----] [--] 'raw: Switch to .bdrv_co_block_status()' 014/20:[----] [--] 'sheepdog: Switch to .bdrv_co_block_status()' 015/20:[----] [--] 'vdi: Avoid bitrot of debugging code' 016/20:[0002] [FC] 'vdi: Switch to .bdrv_co_block_status()' 017/20:[0010] [FC] 'vmdk: Switch to .bdrv_co_block_status()' 018/20:[0007] [FC] 'vpc: Switch to .bdrv_co_block_status()' 019/20:[----] [--] 'vvfat: Switch to .bdrv_co_block_status()' 020/20:[----] [-C] 'block: Drop unused .bdrv_co_get_block_status()'

Eric Blake (20):
block: Add .bdrv_co_block_status() callback
block: Switch passthrough drivers to .bdrv_co_block_status()
file-posix: Switch to .bdrv_co_block_status()
gluster: Switch to .bdrv_co_block_status()
iscsi: Switch cluster_sectors to byte-based
iscsi: Switch iscsi_allocmap_update() to byte-based
iscsi: Switch to .bdrv_co_block_status()
null: Switch to .bdrv_co_block_status()
parallels: Switch to .bdrv_co_block_status()
qcow: Switch to .bdrv_co_block_status()
qcow2: Switch to .bdrv_co_block_status()
qed: Switch to .bdrv_co_block_status()

  raw: Switch to .bdrv_co_block_status()
  sheepdog: Switch to .bdrv_co_block_status()
  vdi: Avoid bitrot of debugging code
  vdi: Switch to .bdrv_co_block_status()
  vmdk: Switch to .bdrv_co_block_status()
  vpc: Switch to .bdrv_co_block_status()
  vvfat: Switch to .bdrv_co_block_status()
  block: Drop unused .bdrv_co_get_block_status()
 include/block/block.h     |   9 ++-
 include/block/block_int.h |  45 +++++++------
 block/io.c                |  81 +++++++++++-------------
 block/blkdebug.c          |  20 +++---
 block/commit.c            |   2 +-
 block/file-posix.c        |  62 +++++++++---------
 block/gluster.c           |  70 ++++++++++-----------
 block/iscsi.c             | 157 ++++++++++++++++++++++++----------------------
 block/mirror.c            |   2 +-
 block/null.c              |  23 +++----
 block/parallels.c         |  22 ++++---
 block/qcow.c              |  27 ++++----
 block/qcow2.c             |  24 +++----
 block/qed.c               |  84 +++++++++----------------
 block/raw-format.c        |  16 ++---
 block/sheepdog.c          |  26 ++++----
 block/throttle.c          |   2 +-
 block/vdi.c               |  45 +++++++------
 block/vmdk.c              |  38 +++++------
 block/vpc.c               |  43 ++++++-------
 block/vvfat.c             |  16 +++--
 21 files changed, 398 insertions(+), 416 deletions(-)
Signature · 1 line
2.14.3
author
#1 lore raw

PATCH v5 1/20 block: Add .bdrv_co_block_status() callback

We are gradually moving away from sector-based interfaces, towards byte-based. Now that the block layer exposes byte-based allocation, it's time to tackle the drivers. Add a new callback that operates on as small as byte boundaries. Subsequent patches will then update individual drivers, then finally remove .bdrv_co_get_block_status(). The old code now uses a goto in order to minimize churn at that later removal. Update documentation in this patch so that the later removal can be a straight delete.

The new code also passes through the 'want_zero' hint, which will allow subsequent patches to further optimize callers that only care about how much of the image is allocated (want_zero is false), rather than full details about runs of zeroes and which offsets the allocation actually maps to (want_zero is true).

Note that most drivers give sector-aligned answers, except at end-of-file, even when request_alignment is smaller than a sector. However, bdrv_getlength() is sector-aligned (even though it gives a byte answer), often by exceeding the actual file size. If we were to give back strict results, at least file-posix.c would report a transition from DATA to HOLE at the end of a file even in the middle of a sector, which can throw off callers; so we intentionally lie and state that any partial sector at the end of a file has the same status for the entire sector. Maybe at some future day we can report actual file size instead of rounding up, but not for this series.

We also add an assertion that any driver using the new callback will make progress (the only time pnum will be 0 is if the block layer already handled an out-of-bounds request, or if there is an error).

---
v5: rebase to master, typo fix, document more block layer guarantees
v4: rebase to master
v3: no change
v2: improve alignment handling, ensure all iotests still pass

---
 include/block/block.h     |  9 ++++-----
 include/block/block_int.h | 14 +++++++++++---
 block/io.c                | 31 ++++++++++++++++++++++++++-----
 3 files changed, 41 insertions(+), 13 deletions(-)
include/block/block.h +4 -5
index c05cac57e5..798e98f783 100644
@@ -136,11 +136,10 @@ typedef struct HDGeometry {
  *                 that the block layer recompute the answer from the returned
  *                 BDS; must be accompanied by just BDRV_BLOCK_OFFSET_VALID.
  *
- * If BDRV_BLOCK_OFFSET_VALID is set, bits 9-62 (BDRV_BLOCK_OFFSET_MASK) of
- * the return value (old interface) or the entire map parameter (new
- * interface) represent the offset in the returned BDS that is allocated for
- * the corresponding raw data.  However, whether that offset actually
- * contains data also depends on BDRV_BLOCK_DATA, as follows:
+ * If BDRV_BLOCK_OFFSET_VALID is set, the map parameter represents the
+ * host offset within the returned BDS that is allocated for the
+ * corresponding raw guest data.  However, whether that offset
+ * actually contains data also depends on BDRV_BLOCK_DATA, as follows:
  *
  * DATA ZERO OFFSET_VALID
  *  t    t        t       sectors read as zero, returned file is zero at offset
include/block/block_int.h +11 -3
index a5482775ec..071263c40f 100644
@@ -206,13 +206,21 @@ struct BlockDriver {
      * bdrv_is_allocated[_above].  The driver should answer only
      * according to the current layer, and should not set
      * BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW.  See block.h
-     * for the meaning of _DATA, _ZERO, and _OFFSET_VALID.  The block
-     * layer guarantees input aligned to request_alignment, as well as
-     * non-NULL pnum and file.
+     * for the meaning of _DATA, _ZERO, and _OFFSET_VALID.  As a hint,
+     * the flag want_zero is true if the caller cares more about
+     * precise mappings (favor _OFFSET_VALID/_ZERO) or false for
+     * overall allocation (favor larger *pnum).  The block layer
+     * guarantees input clamped to bdrv_getlength() and aligned to
+     * request_alignment, as well as non-NULL pnum, map, and file;
+     * in turn, the driver must return an error or set pnum to an
+     * aligned non-zero value.
      */
     int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,
         int64_t sector_num, int nb_sectors, int *pnum,
         BlockDriverState **file);
+    int coroutine_fn (*bdrv_co_block_status)(BlockDriverState *bs,
+        bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
+        int64_t *map, BlockDriverState **file);
 
     /*
      * Invalidate any cached meta-data.
block/io.c +26 -5
index 6773926fc1..5967f3a298 100644
@@ -1889,7 +1889,7 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
 
     /* Must be non-NULL or bdrv_getlength() would have failed */
     assert(bs->drv);
-    if (!bs->drv->bdrv_co_get_block_status) {
+    if (!bs->drv->bdrv_co_get_block_status && !bs->drv->bdrv_co_block_status) {
         *pnum = bytes;
         ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
         if (offset + bytes == total_size) {
@@ -1906,13 +1906,14 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
     bdrv_inc_in_flight(bs);
 
     /* Round out to request_alignment boundaries */
-    /* TODO: until we have a byte-based driver callback, we also have to
-     * round out to sectors, even if that is bigger than request_alignment */
-    align = MAX(bs->bl.request_alignment, BDRV_SECTOR_SIZE);
+    align = bs->bl.request_alignment;
+    if (bs->drv->bdrv_co_get_block_status && align < BDRV_SECTOR_SIZE) {
+        align = BDRV_SECTOR_SIZE;
+    }
     aligned_offset = QEMU_ALIGN_DOWN(offset, align);
     aligned_bytes = ROUND_UP(offset + bytes, align) - aligned_offset;
 
-    {
+    if (bs->drv->bdrv_co_get_block_status) {
         int count; /* sectors */
         int64_t longret;
 
@@ -1937,8 +1938,28 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
         }
         ret = longret & ~BDRV_BLOCK_OFFSET_MASK;
         *pnum = count * BDRV_SECTOR_SIZE;
+        goto refine;
     }
 
+    ret = bs->drv->bdrv_co_block_status(bs, want_zero, aligned_offset,
+                                        aligned_bytes, pnum, &local_map,
+                                        &local_file);
+    if (ret < 0) {
+        *pnum = 0;
+        goto out;
+    }
+    assert(*pnum); /* The block driver must make progress */
+
+    /*
+     * total_size is always sector-aligned, by sometimes exceeding actual
+     * file size. Expand pnum if it lands mid-sector due to end-of-file.
+     */
+    if (QEMU_ALIGN_UP(*pnum + aligned_offset,
+                      BDRV_SECTOR_SIZE) == total_size) {
+        *pnum = total_size - aligned_offset;
+    }
+
+refine:
     /*
      * The driver's result must be a multiple of request_alignment.
      * Clamp pnum and adjust map to original request.
Signature · 1 line
2.14.3
#2 lore raw

Re: [Qemu-devel] [PATCH v5 01/20] block: Add .bdrv_co_block_status() callback

Am 01.12.2017 um 02:42 hat Eric Blake geschrieben:

Quoted 15 lines

We are gradually moving away from sector-based interfaces, towards byte-based. Now that the block layer exposes byte-based allocation, it's time to tackle the drivers. Add a new callback that operates on as small as byte boundaries. Subsequent patches will then update individual drivers, then finally remove .bdrv_co_get_block_status(). The old code now uses a goto in order to minimize churn at that later removal. Update documentation in this patch so that the later removal can be a straight delete.

The new code also passes through the 'want_zero' hint, which will allow subsequent patches to further optimize callers that only care about how much of the image is allocated (want_zero is false), rather than full details about runs of zeroes and which offsets the allocation actually maps to (want_zero is true).

Quoted 11 lines

Note that most drivers give sector-aligned answers, except at end-of-file, even when request_alignment is smaller than a sector. However, bdrv_getlength() is sector-aligned (even though it gives a byte answer), often by exceeding the actual file size. If we were to give back strict results, at least file-posix.c would report a transition from DATA to HOLE at the end of a file even in the middle of a sector, which can throw off callers; so we intentionally lie and state that any partial sector at the end of a file has the same status for the entire sector. Maybe at some future day we can report actual file size instead of rounding up, but not for this series.

In what way does this throw off callers in practice?

The rounding will lead to strange effects, and I'm not sure that dealing with them is any easier than fixing the callers. Imagine an image file like this (very small example, file size 384 bytes):

    0    128      384  512
    |    |        |    |
    +----+--------+----+
    |Hole|  Data  |    |
    +----+--------+----+
                  |

EOF

bdrv_co_block_status(offset=0, bytes=512) returns 512 bytes of HOLE. bdrv_co_block_status(offset=128, bytes=512) returns 384 bytes of DATA. bdrv_co_block_status(offset=384, bytes=512) returns 128 bytes of HOLE.

This is not only contradictory, but the first one is almost begging for data corruption because it returns HOLE for a region that actually contains data.

The only excuse I can imagine is that we say that this can never happen because drivers use 512 byte granularity anyway. But why are we introducing the new interface then? I don't think this semantics is compatible with a bytes-based driver interface.

Quoted 109 lines

We also add an assertion that any driver using the new callback will make progress (the only time pnum will be 0 is if the block layer already handled an out-of-bounds request, or if there is an error).

---
v5: rebase to master, typo fix, document more block layer guarantees
v4: rebase to master
v3: no change
v2: improve alignment handling, ensure all iotests still pass

---
 include/block/block.h     |  9 ++++-----
 include/block/block_int.h | 14 +++++++++++---
 block/io.c                | 31 ++++++++++++++++++++++++++-----
 3 files changed, 41 insertions(+), 13 deletions(-)
include/block/block.h +4 -5
index c05cac57e5..798e98f783 100644
@@ -136,11 +136,10 @@ typedef struct HDGeometry {
  *                 that the block layer recompute the answer from the returned
  *                 BDS; must be accompanied by just BDRV_BLOCK_OFFSET_VALID.
  *
- * If BDRV_BLOCK_OFFSET_VALID is set, bits 9-62 (BDRV_BLOCK_OFFSET_MASK) of
- * the return value (old interface) or the entire map parameter (new
- * interface) represent the offset in the returned BDS that is allocated for
- * the corresponding raw data.  However, whether that offset actually
- * contains data also depends on BDRV_BLOCK_DATA, as follows:
+ * If BDRV_BLOCK_OFFSET_VALID is set, the map parameter represents the
+ * host offset within the returned BDS that is allocated for the
+ * corresponding raw guest data.  However, whether that offset
+ * actually contains data also depends on BDRV_BLOCK_DATA, as follows:
  *
  * DATA ZERO OFFSET_VALID
  *  t    t        t       sectors read as zero, returned file is zero at offset
include/block/block_int.h +11 -3
index a5482775ec..071263c40f 100644
@@ -206,13 +206,21 @@ struct BlockDriver {
      * bdrv_is_allocated[_above].  The driver should answer only
      * according to the current layer, and should not set
      * BDRV_BLOCK_ALLOCATED, but may set BDRV_BLOCK_RAW.  See block.h
-     * for the meaning of _DATA, _ZERO, and _OFFSET_VALID.  The block
-     * layer guarantees input aligned to request_alignment, as well as
-     * non-NULL pnum and file.
+     * for the meaning of _DATA, _ZERO, and _OFFSET_VALID.  As a hint,
+     * the flag want_zero is true if the caller cares more about
+     * precise mappings (favor _OFFSET_VALID/_ZERO) or false for
+     * overall allocation (favor larger *pnum).  The block layer
+     * guarantees input clamped to bdrv_getlength() and aligned to
+     * request_alignment, as well as non-NULL pnum, map, and file;
+     * in turn, the driver must return an error or set pnum to an
+     * aligned non-zero value.
      */
     int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,
         int64_t sector_num, int nb_sectors, int *pnum,
         BlockDriverState **file);
+    int coroutine_fn (*bdrv_co_block_status)(BlockDriverState *bs,
+        bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
+        int64_t *map, BlockDriverState **file);
 
     /*
      * Invalidate any cached meta-data.
block/io.c +11 -5
index 6773926fc1..5967f3a298 100644
@@ -1889,7 +1889,7 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
 
     /* Must be non-NULL or bdrv_getlength() would have failed */
     assert(bs->drv);
-    if (!bs->drv->bdrv_co_get_block_status) {
+    if (!bs->drv->bdrv_co_get_block_status && !bs->drv->bdrv_co_block_status) {
         *pnum = bytes;
         ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
         if (offset + bytes == total_size) {
@@ -1906,13 +1906,14 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
     bdrv_inc_in_flight(bs);
 
     /* Round out to request_alignment boundaries */
-    /* TODO: until we have a byte-based driver callback, we also have to
-     * round out to sectors, even if that is bigger than request_alignment */
-    align = MAX(bs->bl.request_alignment, BDRV_SECTOR_SIZE);
+    align = bs->bl.request_alignment;
+    if (bs->drv->bdrv_co_get_block_status && align < BDRV_SECTOR_SIZE) {
+        align = BDRV_SECTOR_SIZE;
+    }
     aligned_offset = QEMU_ALIGN_DOWN(offset, align);
     aligned_bytes = ROUND_UP(offset + bytes, align) - aligned_offset;
 
-    {
+    if (bs->drv->bdrv_co_get_block_status) {
         int count; /* sectors */
         int64_t longret;
 
@@ -1937,8 +1938,28 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
         }
         ret = longret & ~BDRV_BLOCK_OFFSET_MASK;
         *pnum = count * BDRV_SECTOR_SIZE;
+        goto refine;
     }
 
+    ret = bs->drv->bdrv_co_block_status(bs, want_zero, aligned_offset,
+                                        aligned_bytes, pnum, &local_map,
+                                        &local_file);
+    if (ret < 0) {

block/io.c static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1957

Quoted 10 lines
block/io.c +10 -0
+        *pnum = 0;
+        goto out;
+    }
+    assert(*pnum); /* The block driver must make progress */
+
+    /*
+     * total_size is always sector-aligned, by sometimes exceeding actual
+     * file size. Expand pnum if it lands mid-sector due to end-of-file.
+     */
+    if (QEMU_ALIGN_UP(*pnum + aligned_offset,

aligned_offset + *pnum wouldn be the more conventional order.

block/io.c static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1965

Quoted 7 lines
block/io.c +4 -0
+                      BDRV_SECTOR_SIZE) == total_size) {
+        *pnum = total_size - aligned_offset;
+    }
+refine:
     /*
      * The driver's result must be a multiple of request_alignment.
      * Clamp pnum and adjust map to original request.

Kevin

author
#3 lore raw

Re: [Qemu-devel] [PATCH v5 01/20] block: Add .bdrv_co_block_status() callback

Quoted 12 lines · Kevin Wolf
Quoted 11 lines

Note that most drivers give sector-aligned answers, except at end-of-file, even when request_alignment is smaller than a sector. However, bdrv_getlength() is sector-aligned (even though it gives a byte answer), often by exceeding the actual file size. If we were to give back strict results, at least file-posix.c would report a transition from DATA to HOLE at the end of a file even in the middle of a sector, which can throw off callers; so we intentionally lie and state that any partial sector at the end of a file has the same status for the entire sector. Maybe at some future day we can report actual file size instead of rounding up, but not for this series.

Quoted 2 lines

In what way does this throw off callers in practice?

Several iotests failed if I didn't do that (it's been a few months, so the details are a bit fuzzy). I think the biggest problem is that because we round the size up in bdrv_getlength(), but CANNOT access those rounded bytes, then reporting the status of those bytes as a hole (which is the only sane thing that file-posix can do) can cause grief when the rest of the sector (which we CAN access) is data.

Quoted 11 lines

The rounding will lead to strange effects, and I'm not sure that dealing with them is any easier than fixing the callers. Imagine an image file like this (very small example, file size 384 bytes):

     0    128      384  512
     |    |        |    |
     +----+--------+----+
     |Hole|  Data  |    |
     +----+--------+----+
                   |

EOF

Unlikely. Holes are at least a sector in size on all known filesystems that have holes; that's also true for qcow2 format. The only non-sector-aligned hole that you can encounter in practice is at EOF.

Quoted 8 lines

bdrv_co_block_status(offset=0, bytes=512) returns 512 bytes of HOLE. bdrv_co_block_status(offset=128, bytes=512) returns 384 bytes of DATA. bdrv_co_block_status(offset=384, bytes=512) returns 128 bytes of HOLE.

This is not only contradictory, but the first one is almost begging for data corruption because it returns HOLE for a region that actually contains data.

I agree that it would be confusing, if it were possible. But in practice it is not possible.

Quoted 5 lines

The only excuse I can imagine is that we say that this can never happen because drivers use 512 byte granularity anyway. But why are we introducing the new interface then? I don't think this semantics is compatible with a bytes-based driver interface.

Really, the ONLY boundary that is unlikely to ever be 512-byte aligned is at EOF - and we wouldn't even need to do any rounding if bdrv_getlength() didn't round.

One thing I _can_ do: it is ALWAYS valid to report a partial sector as data. It may pessimize the code slightly, but while rounding the size of a hole up can be wrong if the rounding covers data but the caller getting the rounded data treats that data as 0, rounding the size of data up will never misbehave because the caller will just read the literal zeroes. So I will tweak the code to make sure that if any rounding takes place, that either the driver already set BDRV_BLOCK_EOF (all further bytes also read as zero), or else report the rounded region as data. (I thought I could get away with only io.c setting BDRV_BLOCK_EOF; but it sounds like setting it in the drivers will be helpful).

Quoted 7 lines
Quoted 7 lines

We also add an assertion that any driver using the new callback will make progress (the only time pnum will be 0 is if the block layer already handled an out-of-bounds request, or if there is an error).

Quoted 8 lines

block/io.c static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1951

Quoted 8 lines
block/io.c +8 -0
+    ret = bs->drv->bdrv_co_block_status(bs, want_zero, aligned_offset,
+                                        aligned_bytes, pnum, &local_map,
+                                        &local_file);
+    if (ret < 0) {
+        *pnum = 0;
+        goto out;
+    }
+    assert(*pnum); /* The block driver must make progress */

I debated about combining this assert...

Quoted 8 lines

block/io.c static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1957

Quoted 6 lines
block/io.c +6 -0
+
+    /*
+     * total_size is always sector-aligned, by sometimes exceeding actual
+     * file size. Expand pnum if it lands mid-sector due to end-of-file.
+     */
+    if (QEMU_ALIGN_UP(*pnum + aligned_offset,

aligned_offset + *pnum wouldn be the more conventional order.

Sure.

Quoted 8 lines

block/io.c static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs, · line 1965

Quoted 8 lines
block/io.c +4 -0
+                      BDRV_SECTOR_SIZE) == total_size) {
+        *pnum = total_size - aligned_offset;
+    }
+refine:
      /*
       * The driver's result must be a multiple of request_alignment.
       * Clamp pnum and adjust map to original request.

...with these, but it would trigger on at least vmdk (see patch 17/20)

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org
#4 lore raw

Re: [Qemu-devel] [PATCH v5 01/20] block: Add .bdrv_co_block_status() callback

Am 01.12.2017 um 16:03 hat Eric Blake geschrieben:

Quoted 13 lines · Kevin Wolf
Quoted 12 lines
Quoted 11 lines

Note that most drivers give sector-aligned answers, except at end-of-file, even when request_alignment is smaller than a sector. However, bdrv_getlength() is sector-aligned (even though it gives a byte answer), often by exceeding the actual file size. If we were to give back strict results, at least file-posix.c would report a transition from DATA to HOLE at the end of a file even in the middle of a sector, which can throw off callers; so we intentionally lie and state that any partial sector at the end of a file has the same status for the entire sector. Maybe at some future day we can report actual file size instead of rounding up, but not for this series.

Quoted 8 lines
Quoted 1 line

In what way does this throw off callers in practice?

Several iotests failed if I didn't do that (it's been a few months, so the details are a bit fuzzy). I think the biggest problem is that because we round the size up in bdrv_getlength(), but CANNOT access those rounded bytes, then reporting the status of those bytes as a hole (which is the only sane thing that file-posix can do) can cause grief when the rest of the sector (which we CAN access) is data.

Does this indicate caller bugs? If they call byte-based bdrv_co_block_status(), they should surely be able to handle this situation in theory?

Quoted 12 lines
Quoted 11 lines

The rounding will lead to strange effects, and I'm not sure that dealing with them is any easier than fixing the callers. Imagine an image file like this (very small example, file size 384 bytes):

     0    128      384  512
     |    |        |    |
     +----+--------+----+
     |Hole|  Data  |    |
     +----+--------+----+
                   |

EOF

Quoted 3 lines

Unlikely. Holes are at least a sector in size on all known filesystems that have holes; that's also true for qcow2 format. The only non-sector-aligned hole that you can encounter in practice is at EOF.

Yes, probably not going to happen on file-posix. But I wouldn't bet money that it's the same for all of the other protocols.

Wasn't one of the reasons for this series that NBD actually allows byte granularity block status in its protocol? Which means that an NBD server could expose something like this. Of course, in practice the server is backed by something, too, so this situation is very unlikely, but strictly speaking we wouldn't be able to work with all compliant servers.

Quoted 12 lines
Quoted 7 lines

bdrv_co_block_status(offset=0, bytes=512) returns 512 bytes of HOLE. bdrv_co_block_status(offset=128, bytes=512) returns 384 bytes of DATA. bdrv_co_block_status(offset=384, bytes=512) returns 128 bytes of HOLE.

This is not only contradictory, but the first one is almost begging for data corruption because it returns HOLE for a region that actually contains data.

I agree that it would be confusing, if it were possible. But in practice it is not possible.

Quoted 1 line
Quoted 8 lines
Quoted 4 lines

The only excuse I can imagine is that we say that this can never happen because drivers use 512 byte granularity anyway. But why are we introducing the new interface then? I don't think this semantics is compatible with a bytes-based driver interface.

Really, the ONLY boundary that is unlikely to ever be 512-byte aligned is at EOF - and we wouldn't even need to do any rounding if bdrv_getlength() didn't round.

Yes, bdrv_getlength() needs to be converted sooner or later, too.

Quoted 10 lines

One thing I _can_ do: it is ALWAYS valid to report a partial sector as data. It may pessimize the code slightly, but while rounding the size of a hole up can be wrong if the rounding covers data but the caller getting the rounded data treats that data as 0, rounding the size of data up will never misbehave because the caller will just read the literal zeroes. So I will tweak the code to make sure that if any rounding takes place, that either the driver already set BDRV_BLOCK_EOF (all further bytes also read as zero), or else report the rounded region as data. (I thought I could get away with only io.c setting BDRV_BLOCK_EOF; but it sounds like setting it in the drivers will be helpful).

This looks safer and definitely gives me a better feeling about the rounding.

Kevin

author
#5 lore raw

Re: [Qemu-devel] [PATCH v5 01/20] block: Add .bdrv_co_block_status() callback

Quoted 23 lines · Kevin Wolf

Am 01.12.2017 um 16:03 hat Eric Blake geschrieben:

Quoted 13 lines · Kevin Wolf
Quoted 12 lines
Quoted 11 lines

Note that most drivers give sector-aligned answers, except at end-of-file, even when request_alignment is smaller than a sector. However, bdrv_getlength() is sector-aligned (even though it gives a byte answer), often by exceeding the actual file size. If we were to give back strict results, at least file-posix.c would report a transition from DATA to HOLE at the end of a file even in the middle of a sector, which can throw off callers; so we intentionally lie and state that any partial sector at the end of a file has the same status for the entire sector. Maybe at some future day we can report actual file size instead of rounding up, but not for this series.

Quoted 8 lines
Quoted 1 line

In what way does this throw off callers in practice?

Several iotests failed if I didn't do that (it's been a few months, so the details are a bit fuzzy). I think the biggest problem is that because we round the size up in bdrv_getlength(), but CANNOT access those rounded bytes, then reporting the status of those bytes as a hole (which is the only sane thing that file-posix can do) can cause grief when the rest of the sector (which we CAN access) is data.

Quoted 3 lines

Does this indicate caller bugs? If they call byte-based bdrv_co_block_status(), they should surely be able to handle this situation in theory?

Hmm, the more I try to reproduce the failure, the more I'm coming to the conclusion that I needed this back when we returned a rounded offset via the return value (my tag nbd-byte-callback-v2), but now that we return the actual offset rather than a rounded offset via a secondary parameter (my tag nbd-byte-callback-v4), we don't need to compensate for end-of-file at all! That means even less code in my upcoming v5 submission.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org
author
#6 lore raw

PATCH v5 2/20 block: Switch passthrough drivers to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the generic helpers, and all passthrough clients (blkdebug, commit, mirror, throttle) accordingly.

---
v5: rebase to master
v4: rebase to interface tweak
v3: rebase to addition of throttle driver
v2: rebase to master, retitle while merging blkdebug, commit, and mirror

---
 include/block/block_int.h | 28 ++++++++++++++++------------
 block/io.c                | 36 ++++++++++++++++++++----------------
 block/blkdebug.c          | 20 +++++++++++---------
 block/commit.c            |  2 +-
 block/mirror.c            |  2 +-
 block/throttle.c          |  2 +-
 6 files changed, 50 insertions(+), 40 deletions(-)
include/block/block_int.h +16 -12
index 071263c40f..980333c671 100644
@@ -1027,23 +1027,27 @@ void bdrv_format_default_perms(BlockDriverState *bs, BdrvChild *c,
                                uint64_t *nperm, uint64_t *nshared);
 
 /*
- * Default implementation for drivers to pass bdrv_co_get_block_status() to
+ * Default implementation for drivers to pass bdrv_co_block_status() to
  * their file.
  */
-int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs,
-                                                        int64_t sector_num,
-                                                        int nb_sectors,
-                                                        int *pnum,
-                                                        BlockDriverState **file);
+int coroutine_fn bdrv_co_block_status_from_file(BlockDriverState *bs,
+                                                bool want_zero,
+                                                int64_t offset,
+                                                int64_t bytes,
+                                                int64_t *pnum,
+                                                int64_t *map,
+                                                BlockDriverState **file);
 /*
- * Default implementation for drivers to pass bdrv_co_get_block_status() to
+ * Default implementation for drivers to pass bdrv_co_block_status() to
  * their backing file.
  */
-int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,
-                                                           int64_t sector_num,
-                                                           int nb_sectors,
-                                                           int *pnum,
-                                                           BlockDriverState **file);
+int coroutine_fn bdrv_co_block_status_from_backing(BlockDriverState *bs,
+                                                   bool want_zero,
+                                                   int64_t offset,
+                                                   int64_t bytes,
+                                                   int64_t *pnum,
+                                                   int64_t *map,
+                                                   BlockDriverState **file);
 const char *bdrv_get_parent_name(const BlockDriverState *bs);
 void blk_dev_change_media_cb(BlockBackend *blk, bool load, Error **errp);
 bool blk_dev_has_removable_media(BlockBackend *blk);
block/io.c +20 -16
index 5967f3a298..49d299b7e3 100644
@@ -1798,30 +1798,34 @@ typedef struct BdrvCoBlockStatusData {
     bool done;
 } BdrvCoBlockStatusData;
 
-int64_t coroutine_fn bdrv_co_get_block_status_from_file(BlockDriverState *bs,
-                                                        int64_t sector_num,
-                                                        int nb_sectors,
-                                                        int *pnum,
-                                                        BlockDriverState **file)
+int coroutine_fn bdrv_co_block_status_from_file(BlockDriverState *bs,
+                                                bool want_zero,
+                                                int64_t offset,
+                                                int64_t bytes,
+                                                int64_t *pnum,
+                                                int64_t *map,
+                                                BlockDriverState **file)
 {
     assert(bs->file && bs->file->bs);
-    *pnum = nb_sectors;
+    *pnum = bytes;
+    *map = offset;
     *file = bs->file->bs;
-    return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
-           (sector_num << BDRV_SECTOR_BITS);
+    return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
 }
 
-int64_t coroutine_fn bdrv_co_get_block_status_from_backing(BlockDriverState *bs,
-                                                           int64_t sector_num,
-                                                           int nb_sectors,
-                                                           int *pnum,
-                                                           BlockDriverState **file)
+int coroutine_fn bdrv_co_block_status_from_backing(BlockDriverState *bs,
+                                                   bool want_zero,
+                                                   int64_t offset,
+                                                   int64_t bytes,
+                                                   int64_t *pnum,
+                                                   int64_t *map,
+                                                   BlockDriverState **file)
 {
     assert(bs->backing && bs->backing->bs);
-    *pnum = nb_sectors;
+    *pnum = bytes;
+    *map = offset;
     *file = bs->backing->bs;
-    return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
-           (sector_num << BDRV_SECTOR_BITS);
+    return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
 }
 
 /*
block/blkdebug.c +11 -9
index e21669979d..82c30357f8 100644
@@ -627,15 +627,17 @@ static int coroutine_fn blkdebug_co_pdiscard(BlockDriverState *bs,
     return bdrv_co_pdiscard(bs->file->bs, offset, bytes);
 }
 
-static int64_t coroutine_fn blkdebug_co_get_block_status(
-    BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
-    BlockDriverState **file)
+static int coroutine_fn blkdebug_co_block_status(BlockDriverState *bs,
+                                                 bool want_zero,
+                                                 int64_t offset,
+                                                 int64_t bytes,
+                                                 int64_t *pnum,
+                                                 int64_t *map,
+                                                 BlockDriverState **file)
 {
-    assert(QEMU_IS_ALIGNED(sector_num | nb_sectors,
-                           DIV_ROUND_UP(bs->bl.request_alignment,
-                                        BDRV_SECTOR_SIZE)));
-    return bdrv_co_get_block_status_from_file(bs, sector_num, nb_sectors,
-                                              pnum, file);
+    assert(QEMU_IS_ALIGNED(offset | bytes, bs->bl.request_alignment));
+    return bdrv_co_block_status_from_file(bs, want_zero, offset, bytes,
+                                          pnum, map, file);
 }
 
 static void blkdebug_close(BlockDriverState *bs)
@@ -907,7 +909,7 @@ static BlockDriver bdrv_blkdebug = {
     .bdrv_co_flush_to_disk  = blkdebug_co_flush,
     .bdrv_co_pwrite_zeroes  = blkdebug_co_pwrite_zeroes,
     .bdrv_co_pdiscard       = blkdebug_co_pdiscard,
-    .bdrv_co_get_block_status = blkdebug_co_get_block_status,
+    .bdrv_co_block_status   = blkdebug_co_block_status,
 
     .bdrv_debug_event           = blkdebug_debug_event,
     .bdrv_debug_breakpoint      = blkdebug_debug_breakpoint,
block/commit.c +1 -1
index c5327551ce..ae2a5ddba2 100644
@@ -265,7 +265,7 @@ static void bdrv_commit_top_child_perm(BlockDriverState *bs, BdrvChild *c,
 static BlockDriver bdrv_commit_top = {
     .format_name                = "commit_top",
     .bdrv_co_preadv             = bdrv_commit_top_preadv,
-    .bdrv_co_get_block_status   = bdrv_co_get_block_status_from_backing,
+    .bdrv_co_block_status       = bdrv_co_block_status_from_backing,
     .bdrv_refresh_filename      = bdrv_commit_top_refresh_filename,
     .bdrv_close                 = bdrv_commit_top_close,
     .bdrv_child_perm            = bdrv_commit_top_child_perm,
block/mirror.c +1 -1
index c9badc1203..f5bf620942 100644
@@ -1094,7 +1094,7 @@ static BlockDriver bdrv_mirror_top = {
     .bdrv_co_pwrite_zeroes      = bdrv_mirror_top_pwrite_zeroes,
     .bdrv_co_pdiscard           = bdrv_mirror_top_pdiscard,
     .bdrv_co_flush              = bdrv_mirror_top_flush,
-    .bdrv_co_get_block_status   = bdrv_co_get_block_status_from_backing,
+    .bdrv_co_block_status       = bdrv_co_block_status_from_backing,
     .bdrv_refresh_filename      = bdrv_mirror_top_refresh_filename,
     .bdrv_close                 = bdrv_mirror_top_close,
     .bdrv_child_perm            = bdrv_mirror_top_child_perm,
block/throttle.c +1 -1
index 833175ac77..d1324e7a9f 100644
@@ -239,7 +239,7 @@ static BlockDriver bdrv_throttle = {
     .bdrv_reopen_prepare                =   throttle_reopen_prepare,
     .bdrv_reopen_commit                 =   throttle_reopen_commit,
     .bdrv_reopen_abort                  =   throttle_reopen_abort,
-    .bdrv_co_get_block_status           =   bdrv_co_get_block_status_from_file,
+    .bdrv_co_block_status               =   bdrv_co_block_status_from_file,
 
     .bdrv_co_drain_begin                =   throttle_co_drain_begin,
     .bdrv_co_drain_end                  =   throttle_co_drain_end,
Signature · 1 line
2.14.3
author
#7 lore raw

PATCH v5 3/20 file-posix: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the file protocol driver accordingly.

In want_zero mode, we continue to report fine-grained hole information (the caller wants as much mapping detail as possible); but when not in that mode, the caller prefers larger *pnum and merely cares about what offsets are allocated at this layer, rather than where the holes live. Since holes still read as zeroes at this layer (rather than deferring to a backing layer), we can take the shortcut of skipping lseek(), and merely state that all bytes are allocated.

We can also drop redundant bounds checks that are already guaranteed by the block layer.

---
v5: drop redundant code
v4: tweak commit message [Fam], rebase to interface tweak
v3: no change
v2: tweak comment, add mapping support

---
 block/file-posix.c | 62 +++++++++++++++++++++++++-----------------------------
 1 file changed, 29 insertions(+), 33 deletions(-)
block/file-posix.c +29 -33
index 36ee89e940..e847c7cdd9 100644
@@ -2128,25 +2128,24 @@ static int find_allocation(BlockDriverState *bs, off_t start,
 }
 
 /*
- * Returns the allocation status of the specified sectors.
+ * Returns the allocation status of the specified offset.
  *
- * If 'sector_num' is beyond the end of the disk image the return value is 0
- * and 'pnum' is set to 0.
+ * The block layer guarantees 'offset' and 'bytes' are within bounds.
  *
- * 'pnum' is set to the number of sectors (including and immediately following
- * the specified sector) that are known to be in the same
+ * 'pnum' is set to the number of bytes (including and immediately following
+ * the specified offset) that are known to be in the same
  * allocated/unallocated state.
  *
- * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
- * beyond the end of the disk image it will be clamped.
+ * 'bytes' is the max value 'pnum' should be set to.
  */
-static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
-                                                    int64_t sector_num,
-                                                    int nb_sectors, int *pnum,
-                                                    BlockDriverState **file)
+static int coroutine_fn raw_co_block_status(BlockDriverState *bs,
+                                            bool want_zero,
+                                            int64_t offset,
+                                            int64_t bytes, int64_t *pnum,
+                                            int64_t *map,
+                                            BlockDriverState **file)
 {
-    off_t start, data = 0, hole = 0;
-    int64_t total_size;
+    off_t data = 0, hole = 0;
     int ret;
 
     ret = fd_open(bs);
@@ -2154,39 +2153,36 @@ static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
         return ret;
     }
 
-    start = sector_num * BDRV_SECTOR_SIZE;
-    total_size = bdrv_getlength(bs);
-    if (total_size < 0) {
-        return total_size;
-    } else if (start >= total_size) {
-        *pnum = 0;
-        return 0;
-    } else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
-        nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
+    if (!want_zero) {
+        *pnum = bytes;
+        *map = offset;
+        *file = bs;
+        return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
     }
 
-    ret = find_allocation(bs, start, &data, &hole);
+    ret = find_allocation(bs, offset, &data, &hole);
     if (ret == -ENXIO) {
         /* Trailing hole */
-        *pnum = nb_sectors;
+        *pnum = bytes;
         ret = BDRV_BLOCK_ZERO;
     } else if (ret < 0) {
         /* No info available, so pretend there are no holes */
-        *pnum = nb_sectors;
+        *pnum = bytes;
         ret = BDRV_BLOCK_DATA;
-    } else if (data == start) {
-        /* On a data extent, compute sectors to the end of the extent,
+    } else if (data == offset) {
+        /* On a data extent, compute bytes to the end of the extent,
          * possibly including a partial sector at EOF. */
-        *pnum = MIN(nb_sectors, DIV_ROUND_UP(hole - start, BDRV_SECTOR_SIZE));
+        *pnum = MIN(bytes, hole - offset);
         ret = BDRV_BLOCK_DATA;
     } else {
-        /* On a hole, compute sectors to the beginning of the next extent.  */
-        assert(hole == start);
-        *pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
+        /* On a hole, compute bytes to the beginning of the next extent.  */
+        assert(hole == offset);
+        *pnum = MIN(bytes, data - offset);
         ret = BDRV_BLOCK_ZERO;
     }
+    *map = offset;
     *file = bs;
-    return ret | BDRV_BLOCK_OFFSET_VALID | start;
+    return ret | BDRV_BLOCK_OFFSET_VALID;
 }
 
 static coroutine_fn BlockAIOCB *raw_aio_pdiscard(BlockDriverState *bs,
@@ -2280,7 +2276,7 @@ BlockDriver bdrv_file = {
     .bdrv_close = raw_close,
     .bdrv_create = raw_create,
     .bdrv_has_zero_init = bdrv_has_zero_init_1,
-    .bdrv_co_get_block_status = raw_co_get_block_status,
+    .bdrv_co_block_status = raw_co_block_status,
     .bdrv_co_pwrite_zeroes = raw_co_pwrite_zeroes,
 
     .bdrv_co_preadv         = raw_co_preadv,
Signature · 1 line
2.14.3
#8 lore raw

Re: [Qemu-devel] [PATCH v5 03/20] file-posix: Switch to .bdrv_co_block_status()

Am 01.12.2017 um 02:42 hat Eric Blake geschrieben:

Quoted 77 lines

We are gradually moving away from sector-based interfaces, towards byte-based. Update the file protocol driver accordingly.

In want_zero mode, we continue to report fine-grained hole information (the caller wants as much mapping detail as possible); but when not in that mode, the caller prefers larger *pnum and merely cares about what offsets are allocated at this layer, rather than where the holes live. Since holes still read as zeroes at this layer (rather than deferring to a backing layer), we can take the shortcut of skipping lseek(), and merely state that all bytes are allocated.

We can also drop redundant bounds checks that are already guaranteed by the block layer.

---
v5: drop redundant code
v4: tweak commit message [Fam], rebase to interface tweak
v3: no change
v2: tweak comment, add mapping support

---
 block/file-posix.c | 62 +++++++++++++++++++++++++-----------------------------
 1 file changed, 29 insertions(+), 33 deletions(-)
block/file-posix.c +12 -18
index 36ee89e940..e847c7cdd9 100644
@@ -2128,25 +2128,24 @@ static int find_allocation(BlockDriverState *bs, off_t start,
 }
 
 /*
- * Returns the allocation status of the specified sectors.
+ * Returns the allocation status of the specified offset.
  *
- * If 'sector_num' is beyond the end of the disk image the return value is 0
- * and 'pnum' is set to 0.
+ * The block layer guarantees 'offset' and 'bytes' are within bounds.
  *
- * 'pnum' is set to the number of sectors (including and immediately following
- * the specified sector) that are known to be in the same
+ * 'pnum' is set to the number of bytes (including and immediately following
+ * the specified offset) that are known to be in the same
  * allocated/unallocated state.
  *
- * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
- * beyond the end of the disk image it will be clamped.
+ * 'bytes' is the max value 'pnum' should be set to.
  */
-static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
-                                                    int64_t sector_num,
-                                                    int nb_sectors, int *pnum,
-                                                    BlockDriverState **file)
+static int coroutine_fn raw_co_block_status(BlockDriverState *bs,
+                                            bool want_zero,
+                                            int64_t offset,
+                                            int64_t bytes, int64_t *pnum,
+                                            int64_t *map,
+                                            BlockDriverState **file)
 {
-    off_t start, data = 0, hole = 0;
-    int64_t total_size;
+    off_t data = 0, hole = 0;
     int ret;
 
     ret = fd_open(bs);
@@ -2154,39 +2153,36 @@ static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
         return ret;
     }
 
-    start = sector_num * BDRV_SECTOR_SIZE;
-    total_size = bdrv_getlength(bs);
-    if (total_size < 0) {
-        return total_size;
-    } else if (start >= total_size) {

block/file-posix.c static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs, · line 2161

Quoted 10 lines
block/file-posix.c +5 -4
-        *pnum = 0;
-        return 0;
-    } else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
-        nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
+    if (!want_zero) {
+        *pnum = bytes;
+        *map = offset;
+        *file = bs;
+        return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
     }

The documentation for want_zero in io.c is:

* If 'want_zero' is true, the caller is querying for mapping purposes,
* and the result should include BDRV_BLOCK_OFFSET_VALID and
* BDRV_BLOCK_ZERO where possible; otherwise, the result may omit those
* bits particularly if it allows for a larger value in 'pnum'.

Do we need to include BDRV_BLOCK_DATA there? Otherwise this shortcut would be wrong because BDRV_BLOCK_DATA always needs to be exact, even for want_zero = false.

At first I expected that we want bdrv_is_allocated() to indicate holes in raw files, but that's already not true today, so I now think this is a matter of tweaking the documentation rather than removing the shortcut.

While I'm looking at documentation, commit e88ae2264 had this:

* BDRV_BLOCK_ALLOCATED: the content of the block is determined by this
* layer (as opposed to the backing file)

With this semantics, always returning BDRV_BLOCK_ALLOCATED (and therefore bdrv_is_allocated() == true) for raw file is correct. Your recent commit 4c41cb4 changed it into:

* BDRV_BLOCK_ALLOCATED: the content of the block is determined by this
* layer (short for DATA || ZERO), set by block layer

Its commit message also talks about doing this "for convenience". This is not true. There are code paths that set ZERO after ALLOCATED has already been decided. ALLOCATED was introduced to distinguish a ZERO coming from the driver and a ZERO derived in io.c because the latter doesn't tell us about the allocation status (see commit e88ae2264).

So this documentation should be tweaked as well (possibly just reverting 4c41cb4 for BDRV_BLOCK_ALLOCATED).

Kevin

author
#9 lore raw

PATCH v5 4/20 gluster: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the gluster driver accordingly.

In want_zero mode, we continue to report fine-grained hole information (the caller wants as much mapping detail as possible); but when not in that mode, the caller prefers larger *pnum and merely cares about what offsets are allocated at this layer, rather than where the holes live. Since holes still read as zeroes at this layer (rather than deferring to a backing layer), we can take the shortcut of skipping find_allocation(), and merely state that all bytes are allocated.

We can also drop redundant bounds checks that are already guaranteed by the block layer.

---
v5: drop redundant code
v4: tweak commit message [Fam], rebase to interface tweak
v3: no change
v2: tweak comments [Prasanna], add mapping, drop R-b

---
 block/gluster.c | 70 ++++++++++++++++++++++++++++-----------------------------
 1 file changed, 34 insertions(+), 36 deletions(-)
block/gluster.c +34 -36
index 0f4265a3a4..6388ced82e 100644
@@ -1349,68 +1349,66 @@ exit:
 }
 
 /*
- * Returns the allocation status of the specified sectors.
+ * Returns the allocation status of the specified offset.
  *
- * If 'sector_num' is beyond the end of the disk image the return value is 0
- * and 'pnum' is set to 0.
+ * The block layer guarantees 'offset' and 'bytes' are within bounds.
  *
- * 'pnum' is set to the number of sectors (including and immediately following
- * the specified sector) that are known to be in the same
+ * 'pnum' is set to the number of bytes (including and immediately following
+ * the specified offset) that are known to be in the same
  * allocated/unallocated state.
  *
- * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
- * beyond the end of the disk image it will be clamped.
+ * 'bytes' is the max value 'pnum' should be set to.
  *
- * (Based on raw_co_get_block_status() from file-posix.c.)
+ * (Based on raw_co_block_status() from file-posix.c.)
  */
-static int64_t coroutine_fn qemu_gluster_co_get_block_status(
-        BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
-        BlockDriverState **file)
+static int coroutine_fn qemu_gluster_co_block_status(BlockDriverState *bs,
+                                                     bool want_zero,
+                                                     int64_t offset,
+                                                     int64_t bytes,
+                                                     int64_t *pnum,
+                                                     int64_t *map,
+                                                     BlockDriverState **file)
 {
     BDRVGlusterState *s = bs->opaque;
-    off_t start, data = 0, hole = 0;
-    int64_t total_size;
+    off_t data = 0, hole = 0;
     int ret = -EINVAL;
 
     if (!s->fd) {
         return ret;
     }
 
-    start = sector_num * BDRV_SECTOR_SIZE;
-    total_size = bdrv_getlength(bs);
-    if (total_size < 0) {
-        return total_size;
-    } else if (start >= total_size) {
-        *pnum = 0;
-        return 0;
-    } else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
-        nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
+    if (!want_zero) {
+        *pnum = bytes;
+        *map = offset;
+        *file = bs;
+        return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
     }
 
-    ret = find_allocation(bs, start, &data, &hole);
+    ret = find_allocation(bs, offset, &data, &hole);
     if (ret == -ENXIO) {
         /* Trailing hole */
-        *pnum = nb_sectors;
+        *pnum = bytes;
         ret = BDRV_BLOCK_ZERO;
     } else if (ret < 0) {
         /* No info available, so pretend there are no holes */
-        *pnum = nb_sectors;
+        *pnum = bytes;
         ret = BDRV_BLOCK_DATA;
-    } else if (data == start) {
-        /* On a data extent, compute sectors to the end of the extent,
+    } else if (data == offset) {
+        /* On a data extent, compute bytes to the end of the extent,
          * possibly including a partial sector at EOF. */
-        *pnum = MIN(nb_sectors, DIV_ROUND_UP(hole - start, BDRV_SECTOR_SIZE));
+        *pnum = MIN(bytes, hole - offset);
         ret = BDRV_BLOCK_DATA;
     } else {
-        /* On a hole, compute sectors to the beginning of the next extent.  */
-        assert(hole == start);
-        *pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
+        /* On a hole, compute bytes to the beginning of the next extent.  */
+        assert(hole == offset);
+        *pnum = MIN(bytes, data - offset);
         ret = BDRV_BLOCK_ZERO;
     }
 
+    *map = offset;
     *file = bs;
 
-    return ret | BDRV_BLOCK_OFFSET_VALID | start;
+    return ret | BDRV_BLOCK_OFFSET_VALID;
 }
 
 
@@ -1438,7 +1436,7 @@ static BlockDriver bdrv_gluster = {
 #ifdef CONFIG_GLUSTERFS_ZEROFILL
     .bdrv_co_pwrite_zeroes        = qemu_gluster_co_pwrite_zeroes,
 #endif
-    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
+    .bdrv_co_block_status         = qemu_gluster_co_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
 };
 
@@ -1466,7 +1464,7 @@ static BlockDriver bdrv_gluster_tcp = {
 #ifdef CONFIG_GLUSTERFS_ZEROFILL
     .bdrv_co_pwrite_zeroes        = qemu_gluster_co_pwrite_zeroes,
 #endif
-    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
+    .bdrv_co_block_status         = qemu_gluster_co_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
 };
 
@@ -1494,7 +1492,7 @@ static BlockDriver bdrv_gluster_unix = {
 #ifdef CONFIG_GLUSTERFS_ZEROFILL
     .bdrv_co_pwrite_zeroes        = qemu_gluster_co_pwrite_zeroes,
 #endif
-    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
+    .bdrv_co_block_status         = qemu_gluster_co_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
 };
 
@@ -1528,7 +1526,7 @@ static BlockDriver bdrv_gluster_rdma = {
 #ifdef CONFIG_GLUSTERFS_ZEROFILL
     .bdrv_co_pwrite_zeroes        = qemu_gluster_co_pwrite_zeroes,
 #endif
-    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
+    .bdrv_co_block_status         = qemu_gluster_co_block_status,
     .create_opts                  = &qemu_gluster_create_opts,
 };
 
Signature · 1 line
2.14.3
author
#10 lore raw

PATCH v5 5/20 iscsi: Switch cluster_sectors to byte-based

In reply to Eric Blake

We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert all uses of the cluster size in sectors, along with adding assertions that we are not dividing by zero.

Improve some comment grammar while in the area.

---
v2-v5: no change

---
 block/iscsi.c | 56 +++++++++++++++++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 21 deletions(-)
block/iscsi.c +35 -21
index 4683f3b244..8f903d8370 100644
@@ -84,7 +84,7 @@ typedef struct IscsiLun {
     unsigned long *allocmap;
     unsigned long *allocmap_valid;
     long allocmap_size;
-    int cluster_sectors;
+    int cluster_size;
     bool use_16_for_rw;
     bool write_protected;
     bool lbpme;
@@ -427,9 +427,10 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
 {
     iscsi_allocmap_free(iscsilun);
 
+    assert(iscsilun->cluster_size);
     iscsilun->allocmap_size =
-        DIV_ROUND_UP(sector_lun2qemu(iscsilun->num_blocks, iscsilun),
-                     iscsilun->cluster_sectors);
+        DIV_ROUND_UP(iscsilun->num_blocks * iscsilun->block_size,
+                     iscsilun->cluster_size);
 
     iscsilun->allocmap = bitmap_try_new(iscsilun->allocmap_size);
     if (!iscsilun->allocmap) {
@@ -437,7 +438,7 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
     }
 
     if (open_flags & BDRV_O_NOCACHE) {
-        /* in case that cache.direct = on all allocmap entries are
+        /* when cache.direct = on all allocmap entries are
          * treated as invalid to force a relookup of the block
          * status on every read request */
         return 0;
@@ -458,17 +459,19 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
                       int nb_sectors, bool allocated, bool valid)
 {
     int64_t cl_num_expanded, nb_cls_expanded, cl_num_shrunk, nb_cls_shrunk;
+    int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
 
     if (iscsilun->allocmap == NULL) {
         return;
     }
     /* expand to entirely contain all affected clusters */
-    cl_num_expanded = sector_num / iscsilun->cluster_sectors;
+    assert(cluster_sectors);
+    cl_num_expanded = sector_num / cluster_sectors;
     nb_cls_expanded = DIV_ROUND_UP(sector_num + nb_sectors,
-                                   iscsilun->cluster_sectors) - cl_num_expanded;
+                                   cluster_sectors) - cl_num_expanded;
     /* shrink to touch only completely contained clusters */
-    cl_num_shrunk = DIV_ROUND_UP(sector_num, iscsilun->cluster_sectors);
-    nb_cls_shrunk = (sector_num + nb_sectors) / iscsilun->cluster_sectors
+    cl_num_shrunk = DIV_ROUND_UP(sector_num, cluster_sectors);
+    nb_cls_shrunk = (sector_num + nb_sectors) / cluster_sectors
                       - cl_num_shrunk;
     if (allocated) {
         bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
@@ -532,9 +535,12 @@ iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t sector_num,
     if (iscsilun->allocmap == NULL) {
         return true;
     }
-    size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+    assert(iscsilun->cluster_size);
+    size = DIV_ROUND_UP(sector_num + nb_sectors,
+                        iscsilun->cluster_size >> BDRV_SECTOR_BITS);
     return !(find_next_bit(iscsilun->allocmap, size,
-                           sector_num / iscsilun->cluster_sectors) == size);
+                           sector_num * BDRV_SECTOR_SIZE /
+                           iscsilun->cluster_size) == size);
 }
 
 static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
@@ -544,9 +550,12 @@ static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
     if (iscsilun->allocmap_valid == NULL) {
         return false;
     }
-    size = DIV_ROUND_UP(sector_num + nb_sectors, iscsilun->cluster_sectors);
+    assert(iscsilun->cluster_size);
+    size = DIV_ROUND_UP(sector_num + nb_sectors,
+                        iscsilun->cluster_size >> BDRV_SECTOR_BITS);
     return (find_next_zero_bit(iscsilun->allocmap_valid, size,
-                               sector_num / iscsilun->cluster_sectors) == size);
+                               sector_num * BDRV_SECTOR_SIZE /
+                               iscsilun->cluster_size) == size);
 }
 
 static int coroutine_fn
@@ -781,16 +790,21 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
         BlockDriverState *file;
         /* check the block status from the beginning of the cluster
          * containing the start sector */
-        int64_t ret = iscsi_co_get_block_status(bs,
-                          sector_num - sector_num % iscsilun->cluster_sectors,
-                          BDRV_REQUEST_MAX_SECTORS, &pnum, &file);
+        int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
+        int head;
+        int64_t ret;
+
+        assert(cluster_sectors);
+        head = sector_num % cluster_sectors;
+        ret = iscsi_co_get_block_status(bs, sector_num - head,
+                                        BDRV_REQUEST_MAX_SECTORS, &pnum,
+                                        &file);
         if (ret < 0) {
             return ret;
         }
         /* if the whole request falls into an unallocated area we can avoid
-         * to read and directly return zeroes instead */
-        if (ret & BDRV_BLOCK_ZERO &&
-            pnum >= nb_sectors + sector_num % iscsilun->cluster_sectors) {
+         * reading and directly return zeroes instead */
+        if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
             qemu_iovec_memset(iov, 0, 0x00, iov->size);
             return 0;
         }
@@ -1930,8 +1944,8 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags,
      * reasonable size */
     if (iscsilun->bl.opt_unmap_gran * iscsilun->block_size >= 4 * 1024 &&
         iscsilun->bl.opt_unmap_gran * iscsilun->block_size <= 16 * 1024 * 1024) {
-        iscsilun->cluster_sectors = (iscsilun->bl.opt_unmap_gran *
-                                     iscsilun->block_size) >> BDRV_SECTOR_BITS;
+        iscsilun->cluster_size = iscsilun->bl.opt_unmap_gran *
+            iscsilun->block_size;
         if (iscsilun->lbprz) {
             ret = iscsi_allocmap_init(iscsilun, bs->open_flags);
         }
@@ -2137,7 +2151,7 @@ static int iscsi_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
     IscsiLun *iscsilun = bs->opaque;
     bdi->unallocated_blocks_are_zero = iscsilun->lbprz;
     bdi->can_write_zeroes_with_unmap = iscsilun->lbprz && iscsilun->lbp.lbpws;
-    bdi->cluster_size = iscsilun->cluster_sectors * BDRV_SECTOR_SIZE;
+    bdi->cluster_size = iscsilun->cluster_size;
     return 0;
 }
 
Signature · 1 line
2.14.3
author
#11 lore raw

PATCH v5 6/20 iscsi: Switch iscsi_allocmap_update() to byte-based

In reply to Eric Blake

We are gradually converting to byte-based interfaces, as they are easier to reason about than sector-based. Convert all uses of the allocmap (no semantic change). Callers that already had bytes available are simpler, and callers that now scale to bytes will be easier to switch to byte-based in the future.

---
v3-v5: no change
v2: rebase to count/bytes rename

---
 block/iscsi.c | 90 +++++++++++++++++++++++++++++------------------------------
 1 file changed, 44 insertions(+), 46 deletions(-)
block/iscsi.c +44 -46
index 8f903d8370..4896d50d6e 100644
@@ -455,24 +455,22 @@ static int iscsi_allocmap_init(IscsiLun *iscsilun, int open_flags)
 }
 
 static void
-iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
-                      int nb_sectors, bool allocated, bool valid)
+iscsi_allocmap_update(IscsiLun *iscsilun, int64_t offset,
+                      int64_t bytes, bool allocated, bool valid)
 {
     int64_t cl_num_expanded, nb_cls_expanded, cl_num_shrunk, nb_cls_shrunk;
-    int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
 
     if (iscsilun->allocmap == NULL) {
         return;
     }
     /* expand to entirely contain all affected clusters */
-    assert(cluster_sectors);
-    cl_num_expanded = sector_num / cluster_sectors;
-    nb_cls_expanded = DIV_ROUND_UP(sector_num + nb_sectors,
-                                   cluster_sectors) - cl_num_expanded;
+    assert(iscsilun->cluster_size);
+    cl_num_expanded = offset / iscsilun->cluster_size;
+    nb_cls_expanded = DIV_ROUND_UP(offset + bytes, iscsilun->cluster_size)
+        - cl_num_expanded;
     /* shrink to touch only completely contained clusters */
-    cl_num_shrunk = DIV_ROUND_UP(sector_num, cluster_sectors);
-    nb_cls_shrunk = (sector_num + nb_sectors) / cluster_sectors
-                      - cl_num_shrunk;
+    cl_num_shrunk = DIV_ROUND_UP(offset, iscsilun->cluster_size);
+    nb_cls_shrunk = (offset + bytes) / iscsilun->cluster_size - cl_num_shrunk;
     if (allocated) {
         bitmap_set(iscsilun->allocmap, cl_num_expanded, nb_cls_expanded);
     } else {
@@ -495,26 +493,26 @@ iscsi_allocmap_update(IscsiLun *iscsilun, int64_t sector_num,
 }
 
 static void
-iscsi_allocmap_set_allocated(IscsiLun *iscsilun, int64_t sector_num,
-                             int nb_sectors)
+iscsi_allocmap_set_allocated(IscsiLun *iscsilun, int64_t offset,
+                             int64_t bytes)
 {
-    iscsi_allocmap_update(iscsilun, sector_num, nb_sectors, true, true);
+    iscsi_allocmap_update(iscsilun, offset, bytes, true, true);
 }
 
 static void
-iscsi_allocmap_set_unallocated(IscsiLun *iscsilun, int64_t sector_num,
-                               int nb_sectors)
+iscsi_allocmap_set_unallocated(IscsiLun *iscsilun, int64_t offset,
+                               int64_t bytes)
 {
     /* Note: if cache.direct=on the fifth argument to iscsi_allocmap_update
      * is ignored, so this will in effect be an iscsi_allocmap_set_invalid.
      */
-    iscsi_allocmap_update(iscsilun, sector_num, nb_sectors, false, true);
+    iscsi_allocmap_update(iscsilun, offset, bytes, false, true);
 }
 
-static void iscsi_allocmap_set_invalid(IscsiLun *iscsilun, int64_t sector_num,
-                                       int nb_sectors)
+static void iscsi_allocmap_set_invalid(IscsiLun *iscsilun, int64_t offset,
+                                       int64_t bytes)
 {
-    iscsi_allocmap_update(iscsilun, sector_num, nb_sectors, false, false);
+    iscsi_allocmap_update(iscsilun, offset, bytes, false, false);
 }
 
 static void iscsi_allocmap_invalidate(IscsiLun *iscsilun)
@@ -528,34 +526,30 @@ static void iscsi_allocmap_invalidate(IscsiLun *iscsilun)
 }
 
 static inline bool
-iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t sector_num,
-                            int nb_sectors)
+iscsi_allocmap_is_allocated(IscsiLun *iscsilun, int64_t offset,
+                            int64_t bytes)
 {
     unsigned long size;
     if (iscsilun->allocmap == NULL) {
         return true;
     }
     assert(iscsilun->cluster_size);
-    size = DIV_ROUND_UP(sector_num + nb_sectors,
-                        iscsilun->cluster_size >> BDRV_SECTOR_BITS);
+    size = DIV_ROUND_UP(offset + bytes, iscsilun->cluster_size);
     return !(find_next_bit(iscsilun->allocmap, size,
-                           sector_num * BDRV_SECTOR_SIZE /
-                           iscsilun->cluster_size) == size);
+                           offset / iscsilun->cluster_size) == size);
 }
 
 static inline bool iscsi_allocmap_is_valid(IscsiLun *iscsilun,
-                                           int64_t sector_num, int nb_sectors)
+                                           int64_t offset, int64_t bytes)
 {
     unsigned long size;
     if (iscsilun->allocmap_valid == NULL) {
         return false;
     }
     assert(iscsilun->cluster_size);
-    size = DIV_ROUND_UP(sector_num + nb_sectors,
-                        iscsilun->cluster_size >> BDRV_SECTOR_BITS);
+    size = DIV_ROUND_UP(offset + bytes, iscsilun->cluster_size);
     return (find_next_zero_bit(iscsilun->allocmap_valid, size,
-                               sector_num * BDRV_SECTOR_SIZE /
-                               iscsilun->cluster_size) == size);
+                               offset / iscsilun->cluster_size) == size);
 }
 
 static int coroutine_fn
@@ -637,12 +631,14 @@ retry:
     }
 
     if (iTask.status != SCSI_STATUS_GOOD) {
-        iscsi_allocmap_set_invalid(iscsilun, sector_num, nb_sectors);
+        iscsi_allocmap_set_invalid(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                   nb_sectors * BDRV_SECTOR_SIZE);
         r = iTask.err_code;
         goto out_unlock;
     }
 
-    iscsi_allocmap_set_allocated(iscsilun, sector_num, nb_sectors);
+    iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                 nb_sectors * BDRV_SECTOR_SIZE);
 
 out_unlock:
     qemu_mutex_unlock(&iscsilun->mutex);
@@ -737,9 +733,11 @@ retry:
     }
 
     if (ret & BDRV_BLOCK_ZERO) {
-        iscsi_allocmap_set_unallocated(iscsilun, sector_num, *pnum);
+        iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                       *pnum * BDRV_SECTOR_SIZE);
     } else {
-        iscsi_allocmap_set_allocated(iscsilun, sector_num, *pnum);
+        iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                     *pnum * BDRV_SECTOR_SIZE);
     }
 
     if (*pnum > nb_sectors) {
@@ -777,15 +775,19 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
     /* if cache.direct is off and we have a valid entry in our allocation map
      * we can skip checking the block status and directly return zeroes if
      * the request falls within an unallocated area */
-    if (iscsi_allocmap_is_valid(iscsilun, sector_num, nb_sectors) &&
-        !iscsi_allocmap_is_allocated(iscsilun, sector_num, nb_sectors)) {
+    if (iscsi_allocmap_is_valid(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                nb_sectors * BDRV_SECTOR_SIZE) &&
+        !iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                     nb_sectors * BDRV_SECTOR_SIZE)) {
             qemu_iovec_memset(iov, 0, 0x00, iov->size);
             return 0;
     }
 
     if (nb_sectors >= ISCSI_CHECKALLOC_THRES &&
-        !iscsi_allocmap_is_valid(iscsilun, sector_num, nb_sectors) &&
-        !iscsi_allocmap_is_allocated(iscsilun, sector_num, nb_sectors)) {
+        !iscsi_allocmap_is_valid(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                 nb_sectors * BDRV_SECTOR_SIZE) &&
+        !iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
+                                     nb_sectors * BDRV_SECTOR_SIZE)) {
         int pnum;
         BlockDriverState *file;
         /* check the block status from the beginning of the cluster
@@ -1154,8 +1156,7 @@ retry:
         goto out_unlock;
     }
 
-    iscsi_allocmap_set_invalid(iscsilun, offset >> BDRV_SECTOR_BITS,
-                               bytes >> BDRV_SECTOR_BITS);
+    iscsi_allocmap_set_invalid(iscsilun, offset, bytes);
 
 out_unlock:
     qemu_mutex_unlock(&iscsilun->mutex);
@@ -1253,18 +1254,15 @@ retry:
     }
 
     if (iTask.status != SCSI_STATUS_GOOD) {
-        iscsi_allocmap_set_invalid(iscsilun, offset >> BDRV_SECTOR_BITS,
-                                   bytes >> BDRV_SECTOR_BITS);
+        iscsi_allocmap_set_invalid(iscsilun, offset, bytes);
         r = iTask.err_code;
         goto out_unlock;
     }
 
     if (flags & BDRV_REQ_MAY_UNMAP) {
-        iscsi_allocmap_set_invalid(iscsilun, offset >> BDRV_SECTOR_BITS,
-                                   bytes >> BDRV_SECTOR_BITS);
+        iscsi_allocmap_set_invalid(iscsilun, offset, bytes);
     } else {
-        iscsi_allocmap_set_allocated(iscsilun, offset >> BDRV_SECTOR_BITS,
-                                     bytes >> BDRV_SECTOR_BITS);
+        iscsi_allocmap_set_allocated(iscsilun, offset, bytes);
     }
 
 out_unlock:
Signature · 1 line
2.14.3
author
#12 lore raw

PATCH v5 7/20 iscsi: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the iscsi driver accordingly. In this case, it is handy to teach iscsi_co_block_status() to handle a NULL map and file parameter, even though the block layer passes non-NULL values, because we also call the function directly. For now, there are no optimizations done based on the want_zero flag.

We can also make the simplification of asserting that the block layer passed in aligned values.

---
v5: assert rather than check for alignment
v4: rebase to interface tweaks
v3: no change
v2: rebase to mapping parameter

---
 block/iscsi.c | 67 ++++++++++++++++++++++++++++-------------------------------
 1 file changed, 32 insertions(+), 35 deletions(-)
block/iscsi.c +32 -35
index 4896d50d6e..4c35403e27 100644
@@ -647,28 +647,28 @@ out_unlock:
 
 
 
-static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
-                                                  int64_t sector_num,
-                                                  int nb_sectors, int *pnum,
-                                                  BlockDriverState **file)
+static int coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
+                                              bool want_zero, int64_t offset,
+                                              int64_t bytes, int64_t *pnum,
+                                              int64_t *map,
+                                              BlockDriverState **file)
 {
     IscsiLun *iscsilun = bs->opaque;
     struct scsi_get_lba_status *lbas = NULL;
     struct scsi_lba_status_descriptor *lbasd = NULL;
     struct IscsiTask iTask;
-    int64_t ret;
+    int ret;
 
     iscsi_co_init_iscsitask(iscsilun, &iTask);
 
-    if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
-        ret = -EINVAL;
-        goto out;
-    }
+    assert(QEMU_IS_ALIGNED(offset | bytes, iscsilun->block_size));
 
     /* default to all sectors allocated */
-    ret = BDRV_BLOCK_DATA;
-    ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
-    *pnum = nb_sectors;
+    ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+    if (map) {
+        *map = offset;
+    }
+    *pnum = bytes;
 
     /* LUN does not support logical block provisioning */
     if (!iscsilun->lbpme) {
@@ -678,7 +678,7 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
     qemu_mutex_lock(&iscsilun->mutex);
 retry:
     if (iscsi_get_lba_status_task(iscsilun->iscsi, iscsilun->lun,
-                                  sector_qemu2lun(sector_num, iscsilun),
+                                  offset / iscsilun->block_size,
                                   8 + 16, iscsi_co_generic_cb,
                                   &iTask) == NULL) {
         ret = -ENOMEM;
@@ -717,12 +717,12 @@ retry:
 
     lbasd = &lbas->descriptors[0];
 
-    if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
+    if (offset / iscsilun->block_size != lbasd->lba) {
         ret = -EIO;
         goto out_unlock;
     }
 
-    *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
+    *pnum = lbasd->num_blocks * iscsilun->block_size;
 
     if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
         lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
@@ -733,15 +733,13 @@ retry:
     }
 
     if (ret & BDRV_BLOCK_ZERO) {
-        iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
-                                       *pnum * BDRV_SECTOR_SIZE);
+        iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
     } else {
-        iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
-                                     *pnum * BDRV_SECTOR_SIZE);
+        iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
     }
 
-    if (*pnum > nb_sectors) {
-        *pnum = nb_sectors;
+    if (*pnum > bytes) {
+        *pnum = bytes;
     }
 out_unlock:
     qemu_mutex_unlock(&iscsilun->mutex);
@@ -749,7 +747,7 @@ out:
     if (iTask.task != NULL) {
         scsi_free_scsi_task(iTask.task);
     }
-    if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
+    if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
         *file = bs;
     }
     return ret;
@@ -788,25 +786,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
                                  nb_sectors * BDRV_SECTOR_SIZE) &&
         !iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
                                      nb_sectors * BDRV_SECTOR_SIZE)) {
-        int pnum;
-        BlockDriverState *file;
+        int64_t pnum;
         /* check the block status from the beginning of the cluster
          * containing the start sector */
-        int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
-        int head;
-        int64_t ret;
+        int64_t head;
+        int ret;
 
-        assert(cluster_sectors);
-        head = sector_num % cluster_sectors;
-        ret = iscsi_co_get_block_status(bs, sector_num - head,
-                                        BDRV_REQUEST_MAX_SECTORS, &pnum,
-                                        &file);
+        assert(iscsilun->cluster_size);
+        head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
+        ret = iscsi_co_block_status(bs, false,
+                                    sector_num * BDRV_SECTOR_SIZE - head,
+                                    BDRV_REQUEST_MAX_BYTES, &pnum, NULL, NULL);
         if (ret < 0) {
             return ret;
         }
         /* if the whole request falls into an unallocated area we can avoid
          * reading and directly return zeroes instead */
-        if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
+        if (ret & BDRV_BLOCK_ZERO &&
+            pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
             qemu_iovec_memset(iov, 0, 0x00, iov->size);
             return 0;
         }
@@ -2192,7 +2189,7 @@ static BlockDriver bdrv_iscsi = {
     .bdrv_truncate   = iscsi_truncate,
     .bdrv_refresh_limits = iscsi_refresh_limits,
 
-    .bdrv_co_get_block_status = iscsi_co_get_block_status,
+    .bdrv_co_block_status  = iscsi_co_block_status,
     .bdrv_co_pdiscard      = iscsi_co_pdiscard,
     .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
     .bdrv_co_readv         = iscsi_co_readv,
@@ -2227,7 +2224,7 @@ static BlockDriver bdrv_iser = {
     .bdrv_truncate   = iscsi_truncate,
     .bdrv_refresh_limits = iscsi_refresh_limits,
 
-    .bdrv_co_get_block_status = iscsi_co_get_block_status,
+    .bdrv_co_block_status  = iscsi_co_block_status,
     .bdrv_co_pdiscard      = iscsi_co_pdiscard,
     .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
     .bdrv_co_readv         = iscsi_co_readv,
Signature · 1 line
2.14.3
author
#13 lore raw

PATCH v5 8/20 null: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the null driver accordingly.

---
v5: minor fix to type of 'ret'
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping parameter

---
 block/null.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)
block/null.c +12 -11
index dd9c13f9ba..b762246860 100644
@@ -223,22 +223,23 @@ static int null_reopen_prepare(BDRVReopenState *reopen_state,
     return 0;
 }
 
-static int64_t coroutine_fn null_co_get_block_status(BlockDriverState *bs,
-                                                     int64_t sector_num,
-                                                     int nb_sectors, int *pnum,
-                                                     BlockDriverState **file)
+static int coroutine_fn null_co_block_status(BlockDriverState *bs,
+                                             bool want_zero, int64_t offset,
+                                             int64_t bytes, int64_t *pnum,
+                                             int64_t *map,
+                                             BlockDriverState **file)
 {
     BDRVNullState *s = bs->opaque;
-    off_t start = sector_num * BDRV_SECTOR_SIZE;
+    int ret = BDRV_BLOCK_OFFSET_VALID;
 
-    *pnum = nb_sectors;
+    *pnum = bytes;
+    *map = offset;
     *file = bs;
 
     if (s->read_zeroes) {
-        return BDRV_BLOCK_OFFSET_VALID | start | BDRV_BLOCK_ZERO;
-    } else {
-        return BDRV_BLOCK_OFFSET_VALID | start;
+        ret |= BDRV_BLOCK_ZERO;
     }
+    return ret;
 }
 
 static void null_refresh_filename(BlockDriverState *bs, QDict *opts)
@@ -270,7 +271,7 @@ static BlockDriver bdrv_null_co = {
     .bdrv_co_flush_to_disk  = null_co_flush,
     .bdrv_reopen_prepare    = null_reopen_prepare,
 
-    .bdrv_co_get_block_status   = null_co_get_block_status,
+    .bdrv_co_block_status   = null_co_block_status,
 
     .bdrv_refresh_filename  = null_refresh_filename,
 };
@@ -290,7 +291,7 @@ static BlockDriver bdrv_null_aio = {
     .bdrv_aio_flush         = null_aio_flush,
     .bdrv_reopen_prepare    = null_reopen_prepare,
 
-    .bdrv_co_get_block_status   = null_co_get_block_status,
+    .bdrv_co_block_status   = null_co_block_status,
 
     .bdrv_refresh_filename  = null_refresh_filename,
 };
Signature · 1 line
2.14.3
author
#14 lore raw

PATCH v5 9/20 parallels: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the parallels driver accordingly. Note that the internal function block_status() is still sector-based, because it is still in use by other sector-based functions; but that's okay because request_alignment is 512 as a result of those functions. For now, no optimizations are added based on the mapping hint.

---
v5: fix pnum when return is 0
v4: rebase to interface tweak, R-b dropped
v3: no change
v2: rebase to mapping parameter; it is ignored, so R-b kept

---
 block/parallels.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)
block/parallels.c +15 -7
index 9545761f49..9a3d3748ae 100644
@@ -280,23 +280,31 @@ static coroutine_fn int parallels_co_flush_to_os(BlockDriverState *bs)
 }
 
 
-static int64_t coroutine_fn parallels_co_get_block_status(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn parallels_co_block_status(BlockDriverState *bs,
+                                                  bool want_zero,
+                                                  int64_t offset,
+                                                  int64_t bytes,
+                                                  int64_t *pnum,
+                                                  int64_t *map,
+                                                  BlockDriverState **file)
 {
     BDRVParallelsState *s = bs->opaque;
-    int64_t offset;
+    int count;
 
+    assert(QEMU_IS_ALIGNED(offset | bytes, BDRV_SECTOR_SIZE));
     qemu_co_mutex_lock(&s->lock);
-    offset = block_status(s, sector_num, nb_sectors, pnum);
+    offset = block_status(s, offset >> BDRV_SECTOR_BITS,
+                          bytes >> BDRV_SECTOR_BITS, &count);
     qemu_co_mutex_unlock(&s->lock);
 
+    *pnum = count * BDRV_SECTOR_SIZE;
     if (offset < 0) {
         return 0;
     }
 
+    *map = offset;
     *file = bs->file->bs;
-    return (offset << BDRV_SECTOR_BITS) |
-        BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+    return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
 }
 
 static coroutine_fn int parallels_co_writev(BlockDriverState *bs,
@@ -793,7 +801,7 @@ static BlockDriver bdrv_parallels = {
     .bdrv_open		= parallels_open,
     .bdrv_close		= parallels_close,
     .bdrv_child_perm          = bdrv_format_default_perms,
-    .bdrv_co_get_block_status = parallels_co_get_block_status,
+    .bdrv_co_block_status     = parallels_co_block_status,
     .bdrv_has_zero_init       = bdrv_has_zero_init_1,
     .bdrv_co_flush_to_os      = parallels_co_flush_to_os,
     .bdrv_co_readv  = parallels_co_readv,
Signature · 1 line
2.14.3
author
#15 lore raw

PATCH v5 10/20 qcow: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the qcow driver accordingly. There is no intent to optimize based on the want_zero flag for this format.

---
v5: no change
v4: rebase to interface tweak
v3: rebase to master
v2: rebase to mapping flag

---
 block/qcow.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)
block/qcow.c +16 -11
index 9569deeaf0..f09661dc0c 100644
@@ -513,23 +513,28 @@ static int get_cluster_offset(BlockDriverState *bs,
     return 1;
 }
 
-static int64_t coroutine_fn qcow_co_get_block_status(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn qcow_co_block_status(BlockDriverState *bs,
+                                             bool want_zero,
+                                             int64_t offset, int64_t bytes,
+                                             int64_t *pnum, int64_t *map,
+                                             BlockDriverState **file)
 {
     BDRVQcowState *s = bs->opaque;
-    int index_in_cluster, n, ret;
+    int index_in_cluster, ret;
+    int64_t n;
     uint64_t cluster_offset;
 
     qemu_co_mutex_lock(&s->lock);
-    ret = get_cluster_offset(bs, sector_num << 9, 0, 0, 0, 0, &cluster_offset);
+    ret = get_cluster_offset(bs, offset, 0, 0, 0, 0, &cluster_offset);
     qemu_co_mutex_unlock(&s->lock);
     if (ret < 0) {
         return ret;
     }
-    index_in_cluster = sector_num & (s->cluster_sectors - 1);
-    n = s->cluster_sectors - index_in_cluster;
-    if (n > nb_sectors)
-        n = nb_sectors;
+    index_in_cluster = offset & (s->cluster_size - 1);
+    n = s->cluster_size - index_in_cluster;
+    if (n > bytes) {
+        n = bytes;
+    }
     *pnum = n;
     if (!cluster_offset) {
         return 0;
@@ -537,9 +542,9 @@ static int64_t coroutine_fn qcow_co_get_block_status(BlockDriverState *bs,
     if ((cluster_offset & QCOW_OFLAG_COMPRESSED) || s->crypto) {
         return BDRV_BLOCK_DATA;
     }
-    cluster_offset |= (index_in_cluster << BDRV_SECTOR_BITS);
+    *map = cluster_offset | index_in_cluster;
     *file = bs->file->bs;
-    return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | cluster_offset;
+    return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
 }
 
 static int decompress_buffer(uint8_t *out_buf, int out_buf_size,
@@ -1111,7 +1116,7 @@ static BlockDriver bdrv_qcow = {
 
     .bdrv_co_readv          = qcow_co_readv,
     .bdrv_co_writev         = qcow_co_writev,
-    .bdrv_co_get_block_status   = qcow_co_get_block_status,
+    .bdrv_co_block_status   = qcow_co_block_status,
 
     .bdrv_make_empty        = qcow_make_empty,
     .bdrv_co_pwritev_compressed = qcow_co_pwritev_compressed,
Signature · 1 line
2.14.3
author
#16 lore raw

PATCH v5 11/20 qcow2: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the qcow2 driver accordingly.

For now, we are ignoring the 'want_zero' hint. However, it should be relatively straightforward to honor the hint as a way to return larger *pnum values when we have consecutive clusters with the same data/zero status but which differ only in having non-consecutive mappings.

---
v5: no change
v4: update to interface tweak
v3: no change
v2: rebase to mapping flag

---
 block/qcow2.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
block/qcow2.c +13 -11
index 1914a940e5..642fa3bc8f 100644
@@ -1637,32 +1637,34 @@ static void qcow2_join_options(QDict *options, QDict *old_options)
     }
 }
 
-static int64_t coroutine_fn qcow2_co_get_block_status(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn qcow2_co_block_status(BlockDriverState *bs,
+                                              bool want_zero,
+                                              int64_t offset, int64_t count,
+                                              int64_t *pnum, int64_t *map,
+                                              BlockDriverState **file)
 {
     BDRVQcow2State *s = bs->opaque;
     uint64_t cluster_offset;
     int index_in_cluster, ret;
     unsigned int bytes;
-    int64_t status = 0;
+    int status = 0;
 
-    bytes = MIN(INT_MAX, nb_sectors * BDRV_SECTOR_SIZE);
+    bytes = MIN(INT_MAX, count);
     qemu_co_mutex_lock(&s->lock);
-    ret = qcow2_get_cluster_offset(bs, sector_num << BDRV_SECTOR_BITS, &bytes,
-                                   &cluster_offset);
+    ret = qcow2_get_cluster_offset(bs, offset, &bytes, &cluster_offset);
     qemu_co_mutex_unlock(&s->lock);
     if (ret < 0) {
         return ret;
     }
 
-    *pnum = bytes >> BDRV_SECTOR_BITS;
+    *pnum = bytes;
 
     if (cluster_offset != 0 && ret != QCOW2_CLUSTER_COMPRESSED &&
         !s->crypto) {
-        index_in_cluster = sector_num & (s->cluster_sectors - 1);
-        cluster_offset |= (index_in_cluster << BDRV_SECTOR_BITS);
+        index_in_cluster = offset & (s->cluster_size - 1);
+        *map = cluster_offset | index_in_cluster;
         *file = bs->file->bs;
-        status |= BDRV_BLOCK_OFFSET_VALID | cluster_offset;
+        status |= BDRV_BLOCK_OFFSET_VALID;
     }
     if (ret == QCOW2_CLUSTER_ZERO_PLAIN || ret == QCOW2_CLUSTER_ZERO_ALLOC) {
         status |= BDRV_BLOCK_ZERO;
@@ -4355,7 +4357,7 @@ BlockDriver bdrv_qcow2 = {
     .bdrv_child_perm      = bdrv_format_default_perms,
     .bdrv_create        = qcow2_create,
     .bdrv_has_zero_init = bdrv_has_zero_init_1,
-    .bdrv_co_get_block_status = qcow2_co_get_block_status,
+    .bdrv_co_block_status = qcow2_co_block_status,
 
     .bdrv_co_preadv         = qcow2_co_preadv,
     .bdrv_co_pwritev        = qcow2_co_pwritev,
Signature · 1 line
2.14.3
author
#17 lore raw

PATCH v5 12/20 qed: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the qed driver accordingly, taking the opportunity to inline qed_is_allocated_cb() into its lone caller (the callback used to be important, until we switched qed to coroutines). There is no intent to optimize based on the want_zero flag for this format.

---
v5: initialize len before qed_find_cluster() [Vladimir]
v4: rebase to interface change, inline pointless callback
v3: no change
v2: rebase to mapping flag, fix mask in qed_is_allocated_cb

---
 block/qed.c | 84 +++++++++++++++++++++----------------------------------------
 1 file changed, 28 insertions(+), 56 deletions(-)
block/qed.c +28 -56
index 821dcaa055..13fbc3e2f1 100644
@@ -688,74 +688,46 @@ finish:
     return ret;
 }
 
-typedef struct {
-    BlockDriverState *bs;
-    Coroutine *co;
-    uint64_t pos;
-    int64_t status;
-    int *pnum;
-    BlockDriverState **file;
-} QEDIsAllocatedCB;
-
-/* Called with table_lock held.  */
-static void qed_is_allocated_cb(void *opaque, int ret, uint64_t offset, size_t len)
-{
-    QEDIsAllocatedCB *cb = opaque;
-    BDRVQEDState *s = cb->bs->opaque;
-    *cb->pnum = len / BDRV_SECTOR_SIZE;
-    switch (ret) {
-    case QED_CLUSTER_FOUND:
-        offset |= qed_offset_into_cluster(s, cb->pos);
-        cb->status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
-        *cb->file = cb->bs->file->bs;
-        break;
-    case QED_CLUSTER_ZERO:
-        cb->status = BDRV_BLOCK_ZERO;
-        break;
-    case QED_CLUSTER_L2:
-    case QED_CLUSTER_L1:
-        cb->status = 0;
-        break;
-    default:
-        assert(ret < 0);
-        cb->status = ret;
-        break;
-    }
-
-    if (cb->co) {
-        aio_co_wake(cb->co);
-    }
-}
-
-static int64_t coroutine_fn bdrv_qed_co_get_block_status(BlockDriverState *bs,
-                                                 int64_t sector_num,
-                                                 int nb_sectors, int *pnum,
+static int coroutine_fn bdrv_qed_co_block_status(BlockDriverState *bs,
+                                                 bool want_zero,
+                                                 int64_t pos, int64_t bytes,
+                                                 int64_t *pnum, int64_t *map,
                                                  BlockDriverState **file)
 {
     BDRVQEDState *s = bs->opaque;
-    size_t len = (size_t)nb_sectors * BDRV_SECTOR_SIZE;
-    QEDIsAllocatedCB cb = {
-        .bs = bs,
-        .pos = (uint64_t)sector_num * BDRV_SECTOR_SIZE,
-        .status = BDRV_BLOCK_OFFSET_MASK,
-        .pnum = pnum,
-        .file = file,
-    };
+    size_t len = MIN(bytes, SIZE_MAX);
+    int status;
     QEDRequest request = { .l2_table = NULL };
     uint64_t offset;
     int ret;
 
     qemu_co_mutex_lock(&s->table_lock);
-    ret = qed_find_cluster(s, &request, cb.pos, &len, &offset);
-    qed_is_allocated_cb(&cb, ret, offset, len);
+    ret = qed_find_cluster(s, &request, pos, &len, &offset);
 
-    /* The callback was invoked immediately */
-    assert(cb.status != BDRV_BLOCK_OFFSET_MASK);
+    *pnum = len;
+    switch (ret) {
+    case QED_CLUSTER_FOUND:
+        *map = offset | qed_offset_into_cluster(s, pos);
+        status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+        *file = bs->file->bs;
+        break;
+    case QED_CLUSTER_ZERO:
+        status = BDRV_BLOCK_ZERO;
+        break;
+    case QED_CLUSTER_L2:
+    case QED_CLUSTER_L1:
+        status = 0;
+        break;
+    default:
+        assert(ret < 0);
+        status = ret;
+        break;
+    }
 
     qed_unref_l2_cache_entry(request.l2_table);
     qemu_co_mutex_unlock(&s->table_lock);
 
-    return cb.status;
+    return status;
 }
 
 static BDRVQEDState *acb_to_s(QEDAIOCB *acb)
@@ -1595,7 +1567,7 @@ static BlockDriver bdrv_qed = {
     .bdrv_child_perm          = bdrv_format_default_perms,
     .bdrv_create              = bdrv_qed_create,
     .bdrv_has_zero_init       = bdrv_has_zero_init_1,
-    .bdrv_co_get_block_status = bdrv_qed_co_get_block_status,
+    .bdrv_co_block_status     = bdrv_qed_co_block_status,
     .bdrv_co_readv            = bdrv_qed_co_readv,
     .bdrv_co_writev           = bdrv_qed_co_writev,
     .bdrv_co_pwrite_zeroes    = bdrv_qed_co_pwrite_zeroes,
Signature · 1 line
2.14.3
author
#18 lore raw

PATCH v5 13/20 raw: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the raw driver accordingly.

---
v5: no change
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping

---
 block/raw-format.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
block/raw-format.c +8 -8
index ab552c0954..830243a8e4 100644
@@ -250,17 +250,17 @@ fail:
     return ret;
 }
 
-static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
-                                            int64_t sector_num,
-                                            int nb_sectors, int *pnum,
+static int coroutine_fn raw_co_block_status(BlockDriverState *bs,
+                                            bool want_zero, int64_t offset,
+                                            int64_t bytes, int64_t *pnum,
+                                            int64_t *map,
                                             BlockDriverState **file)
 {
     BDRVRawState *s = bs->opaque;
-    *pnum = nb_sectors;
+    *pnum = bytes;
     *file = bs->file->bs;
-    sector_num += s->offset / BDRV_SECTOR_SIZE;
-    return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
-           (sector_num << BDRV_SECTOR_BITS);
+    *map = offset + s->offset;
+    return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
 }
 
 static int coroutine_fn raw_co_pwrite_zeroes(BlockDriverState *bs,
@@ -496,7 +496,7 @@ BlockDriver bdrv_raw = {
     .bdrv_co_pwritev      = &raw_co_pwritev,
     .bdrv_co_pwrite_zeroes = &raw_co_pwrite_zeroes,
     .bdrv_co_pdiscard     = &raw_co_pdiscard,
-    .bdrv_co_get_block_status = &raw_co_get_block_status,
+    .bdrv_co_block_status = &raw_co_block_status,
     .bdrv_truncate        = &raw_truncate,
     .bdrv_getlength       = &raw_getlength,
     .has_variable_length  = true,
Signature · 1 line
2.14.3
author
#19 lore raw

PATCH v5 14/20 sheepdog: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the sheepdog driver accordingly.

---
v5: no change
v4: update to interface tweak
v3: no change
v2: rebase to mapping flag

---
 block/sheepdog.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
block/sheepdog.c +13 -13
index 696a71442a..0af8b07892 100644
@@ -2988,19 +2988,19 @@ static coroutine_fn int sd_co_pdiscard(BlockDriverState *bs, int64_t offset,
     return acb.ret;
 }
 
-static coroutine_fn int64_t
-sd_co_get_block_status(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
-                       int *pnum, BlockDriverState **file)
+static coroutine_fn int
+sd_co_block_status(BlockDriverState *bs, bool want_zero, int64_t offset,
+                   int64_t bytes, int64_t *pnum, int64_t *map,
+                   BlockDriverState **file)
 {
     BDRVSheepdogState *s = bs->opaque;
     SheepdogInode *inode = &s->inode;
     uint32_t object_size = (UINT32_C(1) << inode->block_size_shift);
-    uint64_t offset = sector_num * BDRV_SECTOR_SIZE;
     unsigned long start = offset / object_size,
-                  end = DIV_ROUND_UP((sector_num + nb_sectors) *
-                                     BDRV_SECTOR_SIZE, object_size);
+                  end = DIV_ROUND_UP(offset + bytes, object_size);
     unsigned long idx;
-    int64_t ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
+    *map = offset;
+    int ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
 
     for (idx = start; idx < end; idx++) {
         if (inode->data_vdi_id[idx] == 0) {
@@ -3017,9 +3017,9 @@ sd_co_get_block_status(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
         }
     }
 
-    *pnum = (idx - start) * object_size / BDRV_SECTOR_SIZE;
-    if (*pnum > nb_sectors) {
-        *pnum = nb_sectors;
+    *pnum = (idx - start) * object_size;
+    if (*pnum > bytes) {
+        *pnum = bytes;
     }
     if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
         *file = bs;
@@ -3097,7 +3097,7 @@ static BlockDriver bdrv_sheepdog = {
     .bdrv_co_writev = sd_co_writev,
     .bdrv_co_flush_to_disk  = sd_co_flush_to_disk,
     .bdrv_co_pdiscard = sd_co_pdiscard,
-    .bdrv_co_get_block_status = sd_co_get_block_status,
+    .bdrv_co_block_status   = sd_co_block_status,
 
     .bdrv_snapshot_create   = sd_snapshot_create,
     .bdrv_snapshot_goto     = sd_snapshot_goto,
@@ -3133,7 +3133,7 @@ static BlockDriver bdrv_sheepdog_tcp = {
     .bdrv_co_writev = sd_co_writev,
     .bdrv_co_flush_to_disk  = sd_co_flush_to_disk,
     .bdrv_co_pdiscard = sd_co_pdiscard,
-    .bdrv_co_get_block_status = sd_co_get_block_status,
+    .bdrv_co_block_status   = sd_co_block_status,
 
     .bdrv_snapshot_create   = sd_snapshot_create,
     .bdrv_snapshot_goto     = sd_snapshot_goto,
@@ -3169,7 +3169,7 @@ static BlockDriver bdrv_sheepdog_unix = {
     .bdrv_co_writev = sd_co_writev,
     .bdrv_co_flush_to_disk  = sd_co_flush_to_disk,
     .bdrv_co_pdiscard = sd_co_pdiscard,
-    .bdrv_co_get_block_status = sd_co_get_block_status,
+    .bdrv_co_block_status   = sd_co_block_status,
 
     .bdrv_snapshot_create   = sd_snapshot_create,
     .bdrv_snapshot_goto     = sd_snapshot_goto,
Signature · 1 line
2.14.3
author
#20 lore raw

PATCH v5 15/20 vdi: Avoid bitrot of debugging code

In reply to Eric Blake

Rework the debug define so that we always get -Wformat checking, even when debugging is disabled.

---
v2-v5: no change

---
 block/vdi.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
block/vdi.c +9 -3
index 8da5dfc897..6f83221ddc 100644
@@ -86,12 +86,18 @@
 #define DEFAULT_CLUSTER_SIZE (1 * MiB)
 
 #if defined(CONFIG_VDI_DEBUG)
-#define logout(fmt, ...) \
-                fprintf(stderr, "vdi\t%-24s" fmt, __func__, ##__VA_ARGS__)
+#define VDI_DEBUG 1
 #else
-#define logout(fmt, ...) ((void)0)
+#define VDI_DEBUG 0
 #endif
 
+#define logout(fmt, ...) \
+    do {                                                                \
+        if (VDI_DEBUG) {                                                \
+            fprintf(stderr, "vdi\t%-24s" fmt, __func__, ##__VA_ARGS__); \
+        }                                                               \
+    } while (0)
+
 /* Image signature. */
 #define VDI_SIGNATURE 0xbeda107f
 
Signature · 1 line
2.14.3
author
#21 lore raw

PATCH v5 16/20 vdi: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the vdi driver accordingly. Note that the TODO is already covered (the block layer guarantees bounds of its requests), and that we can remove the now-unused s->block_sectors.

---
v5: fix pnum when offset rounded down to block_size [Vladimir]
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping flag

---
 block/vdi.c | 33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)
block/vdi.c +13 -20
index 6f83221ddc..f309562d36 100644
@@ -171,8 +171,6 @@ typedef struct {
     uint32_t *bmap;
     /* Size of block (bytes). */
     uint32_t block_size;
-    /* Size of block (sectors). */
-    uint32_t block_sectors;
     /* First sector of block map. */
     uint32_t bmap_sector;
     /* VDI header (converted to host endianness). */
@@ -462,7 +460,6 @@ static int vdi_open(BlockDriverState *bs, QDict *options, int flags,
     bs->total_sectors = header.disk_size / SECTOR_SIZE;
 
     s->block_size = header.block_size;
-    s->block_sectors = header.block_size / SECTOR_SIZE;
     s->bmap_sector = header.offset_bmap / SECTOR_SIZE;
     s->header = header;
 
@@ -508,33 +505,29 @@ static int vdi_reopen_prepare(BDRVReopenState *state,
     return 0;
 }
 
-static int64_t coroutine_fn vdi_co_get_block_status(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vdi_co_block_status(BlockDriverState *bs,
+                                            bool want_zero,
+                                            int64_t offset, int64_t bytes,
+                                            int64_t *pnum, int64_t *map,
+                                            BlockDriverState **file)
 {
-    /* TODO: Check for too large sector_num (in bdrv_is_allocated or here). */
     BDRVVdiState *s = (BDRVVdiState *)bs->opaque;
-    size_t bmap_index = sector_num / s->block_sectors;
-    size_t sector_in_block = sector_num % s->block_sectors;
-    int n_sectors = s->block_sectors - sector_in_block;
+    size_t bmap_index = offset / s->block_size;
+    size_t index_in_block = offset % s->block_size;
     uint32_t bmap_entry = le32_to_cpu(s->bmap[bmap_index]);
-    uint64_t offset;
     int result;
 
-    logout("%p, %" PRId64 ", %d, %p\n", bs, sector_num, nb_sectors, pnum);
-    if (n_sectors > nb_sectors) {
-        n_sectors = nb_sectors;
-    }
-    *pnum = n_sectors;
+    logout("%p, %" PRId64 ", %" PRId64 ", %p\n", bs, offset, bytes, pnum);
+    *pnum = MIN(s->block_size - index_in_block, bytes);
     result = VDI_IS_ALLOCATED(bmap_entry);
     if (!result) {
         return 0;
     }
 
-    offset = s->header.offset_data +
-                              (uint64_t)bmap_entry * s->block_size +
-                              sector_in_block * SECTOR_SIZE;
+    *map = s->header.offset_data + (uint64_t)bmap_entry * s->block_size +
+        index_in_block;
     *file = bs->file->bs;
-    return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
+    return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
 }
 
 static int coroutine_fn
@@ -902,7 +895,7 @@ static BlockDriver bdrv_vdi = {
     .bdrv_child_perm          = bdrv_format_default_perms,
     .bdrv_create = vdi_create,
     .bdrv_has_zero_init = bdrv_has_zero_init_1,
-    .bdrv_co_get_block_status = vdi_co_get_block_status,
+    .bdrv_co_block_status = vdi_co_block_status,
     .bdrv_make_empty = vdi_make_empty,
 
     .bdrv_co_preadv     = vdi_co_preadv,
Signature · 1 line
2.14.3
author
#22 lore raw

PATCH v5 17/20 vmdk: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the vmdk driver accordingly. Drop the now-unused vmdk_find_index_in_cluster().

Also, fix a pre-existing bug: if find_extent() fails (unlikely, since the block layer did a bounds check), then we must return a failure, rather than 0.

---
v5: drop dead code [Vladimir], return error on find_extent() failure
v4: rebase to interface tweak
v3: no change
v2: rebase to mapping flag

---
 block/vmdk.c | 38 ++++++++++++++------------------------
 1 file changed, 14 insertions(+), 24 deletions(-)
block/vmdk.c +14 -24
index c665bcc977..8ae36e7a45 100644
@@ -1295,33 +1295,27 @@ static inline uint64_t vmdk_find_offset_in_cluster(VmdkExtent *extent,
     return extent_relative_offset % cluster_size;
 }
 
-static inline uint64_t vmdk_find_index_in_cluster(VmdkExtent *extent,
-                                                  int64_t sector_num)
-{
-    uint64_t offset;
-    offset = vmdk_find_offset_in_cluster(extent, sector_num * BDRV_SECTOR_SIZE);
-    return offset / BDRV_SECTOR_SIZE;
-}
-
-static int64_t coroutine_fn vmdk_co_get_block_status(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vmdk_co_block_status(BlockDriverState *bs,
+                                             bool want_zero,
+                                             int64_t offset, int64_t bytes,
+                                             int64_t *pnum, int64_t *map,
+                                             BlockDriverState **file)
 {
     BDRVVmdkState *s = bs->opaque;
     int64_t index_in_cluster, n, ret;
-    uint64_t offset;
+    uint64_t cluster_offset;
     VmdkExtent *extent;
 
-    extent = find_extent(s, sector_num, NULL);
+    extent = find_extent(s, offset >> BDRV_SECTOR_BITS, NULL);
     if (!extent) {
-        return 0;
+        return -EIO;
     }
     qemu_co_mutex_lock(&s->lock);
-    ret = get_cluster_offset(bs, extent, NULL,
-                             sector_num * 512, false, &offset,
+    ret = get_cluster_offset(bs, extent, NULL, offset, false, &cluster_offset,
                              0, 0);
     qemu_co_mutex_unlock(&s->lock);
 
-    index_in_cluster = vmdk_find_index_in_cluster(extent, sector_num);
+    index_in_cluster = vmdk_find_offset_in_cluster(extent, offset);
     switch (ret) {
     case VMDK_ERROR:
         ret = -EIO;
@@ -1336,18 +1330,14 @@ static int64_t coroutine_fn vmdk_co_get_block_status(BlockDriverState *bs,
         ret = BDRV_BLOCK_DATA;
         if (!extent->compressed) {
             ret |= BDRV_BLOCK_OFFSET_VALID;
-            ret |= (offset + (index_in_cluster << BDRV_SECTOR_BITS))
-                    & BDRV_BLOCK_OFFSET_MASK;
+            *map = cluster_offset + index_in_cluster;
         }
         *file = extent->file->bs;
         break;
     }
 
-    n = extent->cluster_sectors - index_in_cluster;
-    if (n > nb_sectors) {
-        n = nb_sectors;
-    }
-    *pnum = n;
+    n = extent->cluster_sectors * BDRV_SECTOR_SIZE - index_in_cluster;
+    *pnum = MIN(n, bytes);
     return ret;
 }
 
@@ -2393,7 +2383,7 @@ static BlockDriver bdrv_vmdk = {
     .bdrv_close                   = vmdk_close,
     .bdrv_create                  = vmdk_create,
     .bdrv_co_flush_to_disk        = vmdk_co_flush,
-    .bdrv_co_get_block_status     = vmdk_co_get_block_status,
+    .bdrv_co_block_status         = vmdk_co_block_status,
     .bdrv_get_allocated_file_size = vmdk_get_allocated_file_size,
     .bdrv_has_zero_init           = vmdk_has_zero_init,
     .bdrv_get_specific_info       = vmdk_get_specific_info,
Signature · 1 line
2.14.3
author
#23 lore raw

PATCH v5 18/20 vpc: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the vpc driver accordingly. Drop the now-unused get_sector_offset().

---
v5: fix incorrect rounding in 'map' and bad loop condition [Vladimir]
v4: rebase to interface tweak
v3: rebase to master
v2: drop get_sector_offset() [Kevin], rebase to mapping flag

---
 block/vpc.c | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)
block/vpc.c +22 -21
index 1576d7b595..0000b5b9b4 100644
@@ -705,53 +705,54 @@ fail:
     return ret;
 }
 
-static int64_t coroutine_fn vpc_co_get_block_status(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vpc_co_block_status(BlockDriverState *bs,
+                                            bool want_zero,
+                                            int64_t offset, int64_t bytes,
+                                            int64_t *pnum, int64_t *map,
+                                            BlockDriverState **file)
 {
     BDRVVPCState *s = bs->opaque;
     VHDFooter *footer = (VHDFooter*) s->footer_buf;
-    int64_t start, offset;
+    int64_t image_offset;
     bool allocated;
-    int64_t ret;
+    int ret;
     int n;
 
     if (be32_to_cpu(footer->type) == VHD_FIXED) {
-        *pnum = nb_sectors;
+        *pnum = bytes;
+        *map = offset;
         *file = bs->file->bs;
-        return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID |
-               (sector_num << BDRV_SECTOR_BITS);
+        return BDRV_BLOCK_RAW | BDRV_BLOCK_OFFSET_VALID;
     }
 
     qemu_co_mutex_lock(&s->lock);
 
-    offset = get_image_offset(bs, sector_num << BDRV_SECTOR_BITS, false, NULL);
-    start = offset;
-    allocated = (offset != -1);
+    image_offset = get_image_offset(bs, offset, false, NULL);
+    allocated = (image_offset != -1);
     *pnum = 0;
     ret = 0;
 
     do {
         /* All sectors in a block are contiguous (without using the bitmap) */
-        n = ROUND_UP(sector_num + 1, s->block_size / BDRV_SECTOR_SIZE)
-          - sector_num;
-        n = MIN(n, nb_sectors);
+        n = ROUND_UP(offset + 1, s->block_size) - offset;
+        n = MIN(n, bytes);
 
         *pnum += n;
-        sector_num += n;
-        nb_sectors -= n;
+        offset += n;
+        bytes -= n;
         /* *pnum can't be greater than one block for allocated
          * sectors since there is always a bitmap in between. */
         if (allocated) {
             *file = bs->file->bs;
-            ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | start;
+            *map = image_offset;
+            ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
             break;
         }
-        if (nb_sectors == 0) {
+        if (bytes == 0) {
             break;
         }
-        offset = get_image_offset(bs, sector_num << BDRV_SECTOR_BITS, false,
-                                  NULL);
-    } while (offset == -1);
+        image_offset = get_image_offset(bs, offset, false, NULL);
+    } while (image_offset == -1);
 
     qemu_co_mutex_unlock(&s->lock);
     return ret;
@@ -1097,7 +1098,7 @@ static BlockDriver bdrv_vpc = {
 
     .bdrv_co_preadv             = vpc_co_preadv,
     .bdrv_co_pwritev            = vpc_co_pwritev,
-    .bdrv_co_get_block_status   = vpc_co_get_block_status,
+    .bdrv_co_block_status       = vpc_co_block_status,
 
     .bdrv_get_info          = vpc_get_info,
 
Signature · 1 line
2.14.3
author
#24 lore raw

PATCH v5 19/20 vvfat: Switch to .bdrv_co_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Update the vvfat driver accordingly. Note that we can rely on the block driver having already clamped limits to our block size, and simplify accordingly.

---
v5: no change
v4: rebase to interface tweak
v3: no change
v2: rebase to earlier changes, simplify

---
 block/vvfat.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
block/vvfat.c +7 -9
index a690595f2c..37d85a389f 100644
@@ -3086,15 +3086,13 @@ vvfat_co_pwritev(BlockDriverState *bs, uint64_t offset, uint64_t bytes,
     return ret;
 }
 
-static int64_t coroutine_fn vvfat_co_get_block_status(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *n, BlockDriverState **file)
+static int coroutine_fn vvfat_co_block_status(BlockDriverState *bs,
+                                              bool want_zero, int64_t offset,
+                                              int64_t bytes, int64_t *n,
+                                              int64_t *map,
+                                              BlockDriverState **file)
 {
-    *n = bs->total_sectors - sector_num;
-    if (*n > nb_sectors) {
-        *n = nb_sectors;
-    } else if (*n < 0) {
-        return 0;
-    }
+    *n = bytes;
     return BDRV_BLOCK_DATA;
 }
 
@@ -3255,7 +3253,7 @@ static BlockDriver bdrv_vvfat = {
 
     .bdrv_co_preadv         = vvfat_co_preadv,
     .bdrv_co_pwritev        = vvfat_co_pwritev,
-    .bdrv_co_get_block_status = vvfat_co_get_block_status,
+    .bdrv_co_block_status   = vvfat_co_block_status,
 };
 
 static void bdrv_vvfat_init(void)
Signature · 1 line
2.14.3
author
#25 lore raw

PATCH v5 20/20 block: Drop unused .bdrv_co_get_block_status()

In reply to Eric Blake

We are gradually moving away from sector-based interfaces, towards byte-based. Now that all drivers have been updated to provide the byte-based .bdrv_co_block_status(), we can delete the sector-based interface.

---
v5: rebase to master
v4: rebase to interface tweak
v3: no change
v2: rebase to earlier changes

---
 include/block/block_int.h |  3 ---
 block/io.c                | 34 +---------------------------------
 2 files changed, 1 insertion(+), 36 deletions(-)
include/block/block_int.h +0 -3
index 980333c671..df9b62934d 100644
@@ -215,9 +215,6 @@ struct BlockDriver {
      * in turn, the driver must return an error or set pnum to an
      * aligned non-zero value.
      */
-    int64_t coroutine_fn (*bdrv_co_get_block_status)(BlockDriverState *bs,
-        int64_t sector_num, int nb_sectors, int *pnum,
-        BlockDriverState **file);
     int coroutine_fn (*bdrv_co_block_status)(BlockDriverState *bs,
         bool want_zero, int64_t offset, int64_t bytes, int64_t *pnum,
         int64_t *map, BlockDriverState **file);
block/io.c +1 -33
index 49d299b7e3..9e59dfb550 100644
@@ -1893,7 +1893,7 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
 
     /* Must be non-NULL or bdrv_getlength() would have failed */
     assert(bs->drv);
-    if (!bs->drv->bdrv_co_get_block_status && !bs->drv->bdrv_co_block_status) {
+    if (!bs->drv->bdrv_co_block_status) {
         *pnum = bytes;
         ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
         if (offset + bytes == total_size) {
@@ -1911,40 +1911,9 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
 
     /* Round out to request_alignment boundaries */
     align = bs->bl.request_alignment;
-    if (bs->drv->bdrv_co_get_block_status && align < BDRV_SECTOR_SIZE) {
-        align = BDRV_SECTOR_SIZE;
-    }
     aligned_offset = QEMU_ALIGN_DOWN(offset, align);
     aligned_bytes = ROUND_UP(offset + bytes, align) - aligned_offset;
 
-    if (bs->drv->bdrv_co_get_block_status) {
-        int count; /* sectors */
-        int64_t longret;
-
-        assert(QEMU_IS_ALIGNED(aligned_offset | aligned_bytes,
-                               BDRV_SECTOR_SIZE));
-        /*
-         * The contract allows us to return pnum smaller than bytes, even
-         * if the next query would see the same status; we truncate the
-         * request to avoid overflowing the driver's 32-bit interface.
-         */
-        longret = bs->drv->bdrv_co_get_block_status(
-            bs, aligned_offset >> BDRV_SECTOR_BITS,
-            MIN(INT_MAX, aligned_bytes) >> BDRV_SECTOR_BITS, &count,
-            &local_file);
-        if (longret < 0) {
-            assert(INT_MIN <= longret);
-            ret = longret;
-            goto out;
-        }
-        if (longret & BDRV_BLOCK_OFFSET_VALID) {
-            local_map = longret & BDRV_BLOCK_OFFSET_MASK;
-        }
-        ret = longret & ~BDRV_BLOCK_OFFSET_MASK;
-        *pnum = count * BDRV_SECTOR_SIZE;
-        goto refine;
-    }
-
     ret = bs->drv->bdrv_co_block_status(bs, want_zero, aligned_offset,
                                         aligned_bytes, pnum, &local_map,
                                         &local_file);
@@ -1963,7 +1932,6 @@ static int coroutine_fn bdrv_co_block_status(BlockDriverState *bs,
         *pnum = total_size - aligned_offset;
     }
 
-refine:
     /*
      * The driver's result must be a multiple of request_alignment.
      * Clamp pnum and adjust map to original request.
Signature · 1 line
2.14.3