clk: imx: imx7d: add the Keypad Port module clock
PATCH 1/2 clk: imx: imx7d: add the Keypad Port module clock
According to the i.MX7D Reference Manual, the Keypad Port module (KPP) requires this clock gate to be enabled.
--- drivers/clk/imx/clk-imx7d.c | 1 + include/dt-bindings/clock/imx7d-clock.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/clk/imx/clk-imx7d.c +1 -0
@@ -858,6 +858,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) clks[IMX7D_WDOG2_ROOT_CLK ] =imx_clk_gate4 ("wdog2_root_clk" ,"wdog_post_div" , base +0x49d0 ,0 ); clks[IMX7D_WDOG3_ROOT_CLK ] =imx_clk_gate4 ("wdog3_root_clk" ,"wdog_post_div" , base +0x49e0 ,0 ); clks[IMX7D_WDOG4_ROOT_CLK ] =imx_clk_gate4 ("wdog4_root_clk" ,"wdog_post_div" , base +0x49f0 ,0 ); + clks[IMX7D_KPP_ROOT_CLK ] =imx_clk_gate4 ("kpp_root_clk" ,"ipg_root_clk" , base +0x4aa0 ,0 ); clks[IMX7D_CSI_MCLK_ROOT_CLK ] =imx_clk_gate4 ("csi_mclk_root_clk" ,"csi_mclk_post_div" , base +0x4490 ,0 ); clks[IMX7D_AUDIO_MCLK_ROOT_CLK ] =imx_clk_gate4 ("audio_mclk_root_clk" ,"audio_mclk_post_div" , base +0x4790 ,0 ); clks[IMX7D_WRCLK_ROOT_CLK ] =imx_clk_gate4 ("wrclk_root_clk" ,"wrclk_post_div" , base +0x47a0 ,0 );
include/dt-bindings/clock/imx7d-clock.h +2 -1
@@ -453,5 +453,6 @@#define IMX7D_NAND_RAWNAND_CLK 440#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441#define IMX7D_SNVS_CLK 442 -#define IMX7D_CLK_END 443 +#define IMX7D_KPP_ROOT_CLK 443 +#define IMX7D_CLK_END 444#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
Signature · 1 line
2.16.2
PATCH 2/2 ARM: dts: imx7s: add Keypad Port module
Add the Keypad Port module. Add it disabled by default since only some boards use it. Boards which do need to specify additional properties as documented in the device tree bindings.
--- arch/arm/boot/dts/imx7s.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx7s.dtsi +8 -0
@@ -499,6 +499,14 @@ status = "disabled"; }; + kpp: kpp at 30320000 { + compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; + reg = <0x30320000 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_KPP_ROOT_CLK>; + status = "disabled"; + }; + iomuxc: iomuxc at 30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>;
Signature · 1 line
2.16.2
PATCH 1/2 clk: imx: imx7d: add the Keypad Port module clock
In reply to Stefan AgnerQuoted 4 lines · Stefan Agner
According to the i.MX7D Reference Manual, the Keypad Port module (KPP) requires this clock gate to be enabled.
Signed-off-by Stefan Agner <[email protected]>
Applied both. But for future i.MX clock patches, please also copy clk maintainers to give them chance to comment.
Michael Turquette <[email protected]>
Stephen Boyd <[email protected]>
I will eventually need to send i.MX clock patches to them.
Shawn
Rob Herring
maintainerPATCH 1/2 clk: imx: imx7d: add the Keypad Port module clock
In reply to Stefan AgnerQuoted 8 lines · Stefan Agner
According to the i.MX7D Reference Manual, the Keypad Port module (KPP) requires this clock gate to be enabled.
Signed-off-by Stefan Agner <[email protected]>--- drivers/clk/imx/clk-imx7d.c | 1 + include/dt-bindings/clock/imx7d-clock.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)