drm/arm/malidp: Added support for AFBC modifiers for all layers except DE_SMART
Subsystems (3)
RFC PATCH v2 1/1 drm/arm/malidp: Added support for AFBC modifiers for all layers except DE_SMART
On planes which support AFBC, expose an AFBC modifier for use with BGR888.
Changes from v2:
- Removed the gerrit change-id
- Replaced DRM_ERROR() with DRM_DEBUG_KMS() in malidp_format_mod_supported() to report unsupported modifiers.
--- drivers/gpu/drm/arm/malidp_drv.c | 1 + drivers/gpu/drm/arm/malidp_planes.c | 46 +++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-)
drivers/gpu/drm/arm/malidp_drv.c +1 -0
@@ -392,6 +392,7 @@ static int malidp_init(struct drm_device *drm) drm->mode_config.max_height = hwdev->max_line_size; drm->mode_config.funcs = &malidp_mode_config_funcs; drm->mode_config.helper_private = &malidp_mode_config_helpers; + drm->mode_config.allow_fb_modifiers = true; ret =malidp_crtc_init (drm);if (ret) {
drivers/gpu/drm/arm/malidp_planes.c +44 -2
71 lines not on this page · raw message
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 43 lines · Ayan Kumar Halder
On planes which support AFBC, expose an AFBC modifier for use with BGR888.
Signed-off-by Ayan Kumar halder <[email protected]>Reviewed-by Brian Starkey <[email protected]>Reviewed-by Liviu Dudau <[email protected]>Changes from v2:
- Removed the gerrit change-id
- ReplacedDRM_ERROR()withDRM_DEBUG_KMS()inmalidp_format_mod_supported()to report unsupported modifiers.--- drivers/gpu/drm/arm/malidp_drv.c | 1 + drivers/gpu/drm/arm/malidp_planes.c | 46 +++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-)drivers/gpu/drm/arm/malidp_drv.c +1
-0@@ -392,6 +392,7 @@ static int malidp_init(struct drm_device *drm) drm->mode_config.max_height = hwdev->max_line_size; drm->mode_config.funcs = &malidp_mode_config_funcs; drm->mode_config.helper_private = &malidp_mode_config_helpers; + drm->mode_config.allow_fb_modifiers = true; ret =malidp_crtc_init (drm);if (ret) {drivers/gpu/drm/arm/malidp_planes.c +8
-0@@ -124,6 +124,35 @@ static void malidp_plane_atomic_print_state(struct drm_printer *p,drm_printf (p,"\tn_planes=%u\n" , ms->n_planes); } +static bool malidp_format_mod_supported (struct drm_plane *plane, +u32 format,u64 modifier) +{ +if (WARN_ON (modifier ==DRM_FORMAT_MOD_INVALID )) +return false; + +/* All the pixel formats are supported without any modifier */ +if (modifier ==DRM_FORMAT_MOD_LINEAR )
drivers/gpu/drm/arm/malidp_planes.c static void malidp_plane_atomic_print_state(struct drm_printer *p, · line 144
Quoted 10 lines
drivers/gpu/drm/arm/malidp_planes.c +10
-0+return true; + +if ((modifier >>56 ) !=DRM_FORMAT_MOD_VENDOR_ARM ) +return false; + +if (modifier & + ~DRM_FORMAT_MOD_ARM_AFBC (AFBC_MOD_VALID_BITS )) { +DRM_DEBUG_KMS ("Unsupported modifiers\n" ); +return false; + }
I think the core checks for that by now, or at least Ville had some patches to make that happen ...
I also don't see the ARM_AFBC modifier in upstream yet, is that still in-flight somewhere?
-Daniel
Quoted 60 lines
drivers/gpu/drm/arm/malidp_planes.c +26
-2+ +switch (modifier) { +case DRM_FORMAT_MOD_ARM_AFBC (AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | +AFBC_FORMAT_MOD_YTR | +AFBC_FORMAT_MOD_SPARSE ): +if (format ==DRM_FORMAT_BGR888 ) +return true; + } +return false; +} +static const struct drm_plane_funcs malidp_de_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane,@@ -132,6 +161,7 @@ static const struct drm_plane_funcs malidp_de_plane_funcs = { .atomic_duplicate_state = malidp_duplicate_plane_state, .atomic_destroy_state = malidp_destroy_plane_state, .atomic_print_state = malidp_plane_atomic_print_state, + .format_mod_supported = malidp_format_mod_supported, }; static int malidp_se_check_scaling(struct malidp_plane *mp,@@ -524,6 +554,13 @@ int malidp_de_planes_init(struct drm_device *drm)u32 *formats;int ret, i, j, n; +static const u64 modifiers[] = { +DRM_FORMAT_MOD_ARM_AFBC (AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | +AFBC_FORMAT_MOD_YTR |AFBC_FORMAT_MOD_SPARSE ), +DRM_FORMAT_MOD_LINEAR , +DRM_FORMAT_MOD_INVALID + }; + formats =kcalloc (map->n_pixel_formats,sizeof (*formats),GFP_KERNEL );if (!formats) { ret = -ENOMEM ;@@ -547,9 +584,14 @@ int malidp_de_planes_init(struct drm_device *drm) plane_type = (i ==0 ) ?DRM_PLANE_TYPE_PRIMARY :DRM_PLANE_TYPE_OVERLAY ; + +/* +* All the layers except smart layer supports AFBC modifiers. +*/ ret =drm_universal_plane_init (drm, &plane->base, crtcs, - &malidp_de_plane_funcs, formats, - n,NULL , plane_type,NULL ); + &malidp_de_plane_funcs, formats, n, + (id ==DE_SMART ) ?NULL : modifiers, plane_type,NULL ); +if (ret <0 ) goto cleanup;Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 49 lines · Daniel Vetter
Quoted 48 lines · Ayan Kumar Halder
On planes which support AFBC, expose an AFBC modifier for use with BGR888.
Signed-off-by Ayan Kumar halder <[email protected]>Reviewed-by Brian Starkey <[email protected]>Reviewed-by Liviu Dudau <[email protected]>Changes from v2:
- Removed the gerrit change-id
- ReplacedDRM_ERROR()withDRM_DEBUG_KMS()inmalidp_format_mod_supported()to report unsupported modifiers.--- drivers/gpu/drm/arm/malidp_drv.c | 1 + drivers/gpu/drm/arm/malidp_planes.c | 46 +++++++++++++++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-)drivers/gpu/drm/arm/malidp_drv.c +1
-0@@ -392,6 +392,7 @@ static int malidp_init(struct drm_device *drm) drm->mode_config.max_height = hwdev->max_line_size; drm->mode_config.funcs = &malidp_mode_config_funcs; drm->mode_config.helper_private = &malidp_mode_config_helpers; + drm->mode_config.allow_fb_modifiers = true; ret =malidp_crtc_init (drm);if (ret) {drivers/gpu/drm/arm/malidp_planes.c +13
-0@@ -124,6 +124,35 @@ static void malidp_plane_atomic_print_state(struct drm_printer *p,drm_printf (p,"\tn_planes=%u\n" , ms->n_planes); } +static bool malidp_format_mod_supported (struct drm_plane *plane, +u32 format,u64 modifier) +{ +if (WARN_ON (modifier ==DRM_FORMAT_MOD_INVALID )) +return false; + +/* All the pixel formats are supported without any modifier */ +if (modifier ==DRM_FORMAT_MOD_LINEAR ) +return true; + +if ((modifier >>56 ) !=DRM_FORMAT_MOD_VENDOR_ARM ) +return false; +
Quoted 8 lines
drivers/gpu/drm/arm/malidp_planes.c static void malidp_plane_atomic_print_state(struct drm_printer *p, · line 144
Quoted 5 lines
drivers/gpu/drm/arm/malidp_planes.c +5
-0+if (modifier & + ~DRM_FORMAT_MOD_ARM_AFBC (AFBC_MOD_VALID_BITS )) { +DRM_DEBUG_KMS ("Unsupported modifiers\n" ); +return false; + }I think the core checks for that by now, or at least Ville had some patches to make that happen ...
Can you paste the link (or atleast the title) of the patches that you are referring to ? I might then have to rework on this.
Quoted 2 lines
I also don't see the
ARM_AFBCmodifier in upstream yet, is that still in-flight somewhere?
I realized that I was missing the ack on my first patch of the series (ie
https://lists.freedesktop.org/archives/dri-devel/2018-June/180125.html)
and the reason I believe is that I did not put the correct email addresses in "--to" for the drm_fourcc.h maintainers. I will resend the patch and wait for their ack.
Quoted 58 lines
-Daniel
Quoted 56 lines
drivers/gpu/drm/arm/malidp_planes.c +26
-3+ +switch (modifier) { +case DRM_FORMAT_MOD_ARM_AFBC (AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | +AFBC_FORMAT_MOD_YTR | +AFBC_FORMAT_MOD_SPARSE ): +if (format ==DRM_FORMAT_BGR888 ) +return true; + } +return false; +} +static const struct drm_plane_funcs malidp_de_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane,@@ -132,6 +161,7 @@ static const struct drm_plane_funcs malidp_de_plane_funcs = { .atomic_duplicate_state = malidp_duplicate_plane_state, .atomic_destroy_state = malidp_destroy_plane_state, .atomic_print_state = malidp_plane_atomic_print_state, + .format_mod_supported = malidp_format_mod_supported, }; static int malidp_se_check_scaling(struct malidp_plane *mp,@@ -524,6 +554,13 @@ int malidp_de_planes_init(struct drm_device *drm)u32 *formats;int ret, i, j, n; +static const u64 modifiers[] = { +DRM_FORMAT_MOD_ARM_AFBC (AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | +AFBC_FORMAT_MOD_YTR |AFBC_FORMAT_MOD_SPARSE ), +DRM_FORMAT_MOD_LINEAR , +DRM_FORMAT_MOD_INVALID + }; + formats =kcalloc (map->n_pixel_formats,sizeof (*formats),GFP_KERNEL );if (!formats) { ret = -ENOMEM ;@@ -547,9 +584,14 @@ int malidp_de_planes_init(struct drm_device *drm) plane_type = (i ==0 ) ?DRM_PLANE_TYPE_PRIMARY :DRM_PLANE_TYPE_OVERLAY ; + +/* +* All the layers except smart layer supports AFBC modifiers. +*/ ret =drm_universal_plane_init (drm, &plane->base, crtcs, - &malidp_de_plane_funcs, formats, - n,NULL , plane_type,NULL ); + &malidp_de_plane_funcs, formats, n, + (id ==DE_SMART ) ?NULL : modifiers, plane_type,NULL ); +if (ret <0 ) goto cleanup; --2.7.4
Quoted 9 lines
Quoted 4 lines
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel